Reporting Unit Error in EEO report OUTPUT

For EEO report , I've created Address sequence in  Table T5UAD and have created Reporting units Type - I in V_T5URU table.
Have also maintained the Reporting Unit and all other required entries in  Table  V_T5U0P   against all US Pers. Areas and Subareas , but when I run the report , I am getting this error
*No reporting unit found in T5URU FOR UNIT NUMBER T548198*
STARNGE part is that this reporting Unit is available in V_T5URU when I go and check the table.
I've deleted it and maintained it again also , but still getting this error.
CAN ANYONE SUGGEST WHAT IS WRONG? 
How can I fix this issue?
Any inputs are very highly appreciated as I could not find on Google .....

Hi Ted
Thanks for your reply , but as per information provided by my client , same reporting units say T58591 is being used for both VETS as well as EEO , so I used I option insead of E or V as I cannot define the same reporting unit twice in the table with same name .
Its working fine for almost all other reporting units except for 2 of them ... for which reports giving the error that reporting unit is missing in T5URU but I can see the entry available in this table.
Any Idea why is this happening?

Similar Messages

  • Report Designer - Error when Loading Report

    Hi,
    We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
    Did anyone encounter this issue and is there a solution to this.
    Thanks
    Hemant

    Hello,
    Please go to SE38 -> RS_REPORT_MAINTAIN,
    Type your report name, and DT als "Report Type".
    Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
    Regards, Karol Kalisz, BI Development

  • Crystal Reports XI - ERROR closes Crystal Reports Entirely

    Post Author: crdev
    CA Forum: Data Connectivity and SQL
    Our company recently purchased Crystal Reports XI.  We had previously used Crystal Reports 8 and had great success using it.  Our problem is that when creating a new report using CR XI after selecting our ODBC datasource and inputing our username and password crystal reports generates an error and closes entirely.  There is not an error code or error description either.  Our datasource connects to a secured Access database with a database password set.  This same datasource worked great using CR 8. Has anyone else had this problem?  If so, did you find a solution?  

    Tim,
    If you have previous versions of Crystal Reports try removing them. As well check that there are no Business Objects or Crystal Decisions folders under C:\Program Files and that there are no Registry keys for Business Objects or Crystal Decisions in HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER > Software. (*Back up the Registry before editing)
    If you are trying to install from a CD or network drive copy the contents of the install package to the local machine.
    Ensure you are logged on as Administrator and that Antivirus and AntiSpam ware are disabled.

  • Crystal Reports 10 error while saving report

    Last week i had a problem while saving my report.
    I get the following error while saving my report:
    crw32.exe has encountered a problem and needs to close
    The only way to get around this was after every change build a preview and close the preview and after that save the report.
    On the internet i found someting about installing the latest service pack, so i did.
    After that i had the problem described in the following thread: Re: Changing datasource causes parameters to blank out
    Sometimes the field to fill a parameter are gone.
    The solution is to downgrade to service pack 5, but on the download page [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm] i can't find sp5, only sp3, sp4 and sp6.
    I'm downloading sp5 now, but does anyone know if this solve the problem?
    Many thanks
    Edited by: Joris Stoop on Aug 21, 2008 11:53 AM

    Hi Joris,
    please find here [SPs for CR 10 |http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR10] including  [Service Pack 5 - ZIP - released August 2006|http://resources.businessobjects.com/support/support/communitycs/FilesAndUpdates/cr10win_en_sp5.pdf]
    and the [Readme - PDF|http://resources.businessobjects.com/support/communitycs/FilesAndUpdates/cr10win_en_sp5.zip] but unfortunately I do not know if this fixes your prob.
    Best regards
    Falk

  • CRVS2010 Beta - Report Viewer Errors for Crystal Reports in VS 2010

    I have a project that was written in VS 2008 targeting the 3.5 framework which contains a ton of Crystal Reports.  I recieved my new license for VS 2010 and did the install along with the Crystal Reports for Visual Studio 2010 Beta 2.  I converted my project over successfully.  I am able to open up the reports on their own.  When I try to save them they want to be converted to the new format.  This also works fine.  My problem is the Crystal Reports Viewer.  I am not able to add any reports to the viewer without receiving error messages.  I have tried using the 10.5 and the latest version of the viewer, but receive errors everytime that I try to add a report to it.  I always recevie the following error:
    "Error invoking 'Choose a Crystal Report...'. Details: Invalid Report Source"
    I have also tried just creating a brand new report from the Crystal Report Viewer Tasks window.  When I do that I get this error:
    "Unable to find the report in the manifest resources. Please buld the project, and try again."  "Error invoking 'Create a New Crystal Report...'. Details: Unable to find the report in the mnifest resources. Please build the project, and try again."
    I have tried changed the framework target to 4.0, but this has not helped.  I have tried using the 14.0 versions of the references and the 10.5 versions.  I have searched all over the internet for a resolution, but can't seem to find one.  Any help would be greatly appreciated.

    I am having the same problem. You say make sure all of my assemblies are version 14. Three questions:
    1. Now that I have removed all of the old Crystal assemblies from my project, what are the assemblies that I need to add back?
    2. My VS 2010 "add references" popup shows me many crystal assembles (Crystal XI is also installed) which ones to I need to install now?
    3. If I don't know what they are, or where to find them, how do I determine their version?
    You solution reminds me of the old saying "If I had ham, I could make ham and eggs. If I had eggs!"
    More information please,
    J Rich
    Edited by: JosephRich on Nov 6, 2010 5:36 PM
    Edited by: JosephRich on Nov 6, 2010 5:39 PM

  • Crystal Reports XI - Error when displaying report

    Hi Guys,
    I'm using Crystal reports XI release 2. I'm attempting to get some data from an Oracle database and display it as a Crsytal Report onto a JSP. Tomcat 5.0 is being used.
    At first I was using Crystal XI and than upgraded to Release 2.
    Here's the error message I'm getting when report is rendering:
    "Null page: Unable to create page from report source."
    And the stack trace for the error is:
    Exception at EPFPageFactory.getPage: java.lang.Exception: Error in EPFImapgeObjectInstancesBase.getInstanceProperties: null epfImage
    At this point I have not found any references at all on the web regarding this issue. It's been a long time now since I've been trying to use Crystal - Java and I've hot succeed to do so. I only find an article which said There's a hot fix which solves this issue, I installed it but nothing really happened, I kept getting the same error.
    Please , any help will be greatly appreciated.
    Best Regards,
    Esteban

    even i am trying the same if u get something pls do let me know

  • Get a Report crashed error while running report using the mode character

    Hello,
    I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
    I'm using report 6i and Oracle 8i.
    Thanks in advance for your help.
    Regards,
    Laurent.

    Hi Thanks for the response,
    In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
    Regards,
    Laurent.

  • Errors in EEO -1 report

    Hi
    Can anyone tell me the reasons for below errors in EEO report.
    Invalid Race or ethnicity:This error is showing for the ethincity Two or More Races.
    No record in Table T5U0P:I checked the table for some PA EEO company ID is maintained for some PA not.
    No Reporting Unit found in T5URU for PA:
    Record could not be found T5UEEO 2010 01
    Please anyone can suggest me on above issues.
    Reagrds
    Vijay

    Hi Vijay,
    Your table entries are incorrect, that is causing the problem, but the data entries in IT0077 may be aligned to the incorrect entries in T505R.  Thus, if you change the table entries to match the ones I have given all, your Hispanics may be classified as American indians on the EEO-1 report!    With 10 days left until the report has to be submitted, not sure how you can do the table correction and data clean-up in that short time. 
    The E1 and E2 entries separate out those who are Hispanic and those not.  Only those not Hispanic should have an entry in R1-6.  Thus, your R1 is not needed.  Also, your other entries do not match the mapping for the ethnic groupings that SAP program supplies for the EEO-1 report.  You may have modify the program so your groupings fill the correct columns in the EEO-1 report.  While it is not best practice to change the standard report, copying it to a custom version may be your only option at this point of time.  Then you can work to correct the table and IT0077 entries to reflect the standard SAP solution. 
    The other errors on the report indicate that certain Personnel Areas did not have entries in the prior year EEO-1 report.  That is possible if you have new Personnel Areas or they have changed the unit identification number with the EEOC.  When you do make your final EEO-1 report run, you should check the box to "Write results in EEO record".  This will make the entries in T5UEEO for this year that will be used for next year's "Prior year results".  If you did not do this last year, you can rerun the report for the dates last year and check the box. 
    Paul

  • ERROR in EEO Suite of Reports

    Hi All,
    I am done with EEO setup. I have single business group and 6 locations where employee are attached. I want to generate individual reports for each location. I have created different hierarchy to which different location are attached. But when I am running report i am facing following error:
    1) EEO Consolidated Report: It is not showing complete data and how many EEO-1 reports are submitted . it is just showing that that head count.
    2) EEO Establishment Employment Listing : ESTABLISHMENT LISTING - TYPE 5 :
    it is not showing any employee data as employee count is more than 49 and it is showing maximum employees 49.
    3) EEO-1 Exception Report (EEO-1 Exception Report):
    It is showing status Completed with warning ... and when i checked the log i got following massage:
    [7/27/10 3:16:05 AM] [27153:RT483659] Starting XML Publisher post-processing action.
    [7/27/10 3:16:05 AM] [27153:RT483659]
    Template code: PERRPEOC
    Template app: PER
    Language: US
    Territory: US
    Output type: PDF
    [7/27/10 3:16:05 AM] [UNEXPECTED] [27153:RT483658] oracle.apps.xdo.XDOException: Invalid input combination.
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:995)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:285)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
    [7/27/10 3:16:05 AM] [27153:RT483658] Completed post-processing actions for request 483658
    Kindly Help me to sort out this issue. Thank u in advance.

    Hi Basaw;
    What is your EBS?
    I could find just 2 notes in metalink which has similar error like yours,please check them if its not help i suggest log a SR while you are waiting other forum users response here
    JGSLAJNLLG Global Ledger Journal Report runs in warning and produces no output [ID 1151273.1]
    Bug 9047550: AR TO GL RECONCILIATION REPORT COMPLETES WITH WARNINGS
    https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=9047550&productFamily=Oracle
    Regard
    Helios

  • Error when sending report output to printer from Forms 10g

    Hi,
    I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
    terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
    Thanks,
    Anna
    PROCEDURE SEND_TO_PRINTER IS
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(50);
    rep_server system_variables.reports_server%type;
    alldone          exception;
    BEGIN
         select reports_server
         into rep_server
         from system_variables;
         if rep_server is null then
              msg_alert('Error getting the reports server name', 'I', FALSE);                
              raise alldone;
         end if;
         :ctrl.run_report_errors := 'N';                    
         repid := find_report_object('REP_OBJ1');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
         IF :ctrl.rg_print = 'P' THEN
              --Send the output to printer.
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
         ELSIF :ctrl.rg_print = 'R' THEN
              --Rich Text Format
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
         END IF;
         v_rep := RUN_REPORT_OBJECT(repid);
         rep_status := REPORT_OBJECT_STATUS(v_rep);
         WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
         LOOP
              rep_status := report_object_status(v_rep);
         END LOOP;
         IF rep_status = 'FINISHED' THEN
              null;
         ELSE
              :ctrl.run_report_errors := 'Y';
              msg_alert('Error when running report.' || rep_status, 'I', FALSE);           
         END IF;
    EXCEPTION
         when no_data_found then
              msg_alert('Error getting the reports server name', 'I', FALSE);      
         when alldone then
              null;     
    END;

    If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
    LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

  • Error in the report processing unit.

    Hi,
    we have installed BO Edge 3.1 on SuSE Linux Enterprise Server 10 SP2 (x86_64) under VMware. All works fine, but the scheduling is not stable. We schedule a Crystal Report 10 times, but only 1 or 2 times the run is successfully. The option "View" doesn't make any problems.
    The error messages are "Error in the report processing unit." or "Error in File UNKNOWN.RPT: Unknown Database Connector Error Details: crystalenterprise12.sessionmgr.1: The property SI_GUID of info object with id number 20822 is not unique. Table = 'CMS_InfoObjects6'. Column = 'SI_GUID'."
    Have anyone the same experiences?
    Regards,
    Thomas Windischmann

    Thomas,
    Check the following link also.Because there could be chance of getting this error because of VM ware, linux versions.
    Re: OCA_Abuse exception 7711 at [exceptionmapper.cpp : 77]
    And also try to publish the report to CMC and access from infoview.
    Thanks,
    Anil

  • PDF Report Error When Distribute the Output?

    REP-0069: Internal Error.
    REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
    REP-50159: Executed successfully but there were some errors when distribute the output.
    Approximately 5000 Pages
    Distribute PDF File Approximately 1700 Files
    How i can resolve this issue?

    Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
    those patches.
    Reference
    Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
    Regards RZ

  • XML output error using rdf report

    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    /u0/app/oracle/product/8.0.6/SPECIAL2/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /u0/app/oracle/product/8.0.6/SPECIAL2/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Hi All,
    I'm trying to generate XML output using oracle report (rdf). I've creared a report and registered in application with output as xml.
    When i ran the report its giving me the below error.
    Can some one please help in solving this issue.
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_AMERICA.UTF8
    stat_low = 8B
    stat_high = 0
    emsg:was terminated by signal 11
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program was terminated by signal 11
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1234665.
    Thanks in advance,

    Hi,
    How do I get the Oracle .EDF report parameters in .XML output?
    When I display in the header of the .rdf, I do not see in .xml output, hence cannot use it in .rtf.
    Thanks in advance

  • REP-0081 error when emailing report output

    I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
    REP-0081: Error during file I/O operation.
    REP-0110: Unable to open file 'mpa02448.pdf'.
    scaba 14
    Execution Mode = Batch
    Report Destination = Mail
    Report Destination Name = [email protected]
    Report Destination Format = PDF
    I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
    Any ideas?

    I have verified the latest patches.
    Addresses are indeed in Windows address book.
    As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
    Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise.

  • Purchase Order Print Report Compilation Error

    Hi,
    While compiling the report in Reports Builder Purchase Order Print Report , we get the following error:
    identifier GET_PRECISION must be declared.
    Where as this is a seeded function inbuild in the Program Units.
    Also while compiling on server we get the error.
    Cannot convert rdf to rep.
    Thanks,
    Angelica.

    Couldn't find how to copy the PO layout over using copy express.
    I did compare the RDOC fields for POR20002 in both databases and they are Identical. 
    In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing.  Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places.  When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
    Again, SBODemoUS works correctly and AAA_TEST give the error.

Maybe you are looking for