Reporting WBS Disbursements  from MIRO or non-PO Invoice

How do I  determine how much was disbursed for a WBS?  Recall that the WBS is entered at the line item of the MIRO or Misc Invoice?

hi
you can check the GL account Report FBL3N

Similar Messages

  • Unable to post FA tranx from MIRO to FICO

    Dear Experts,
    I am having problems on posting FA tranx from MIRO to FICO during Invoice verification level with the following message:-
    Item 003 Order 600000483 budget exceeded
    Availability Control:-
    As conveyed on 11 March 2008, pls change the "error message" (Act=3) configuration to warning (Act=1) for this occasssion to enable the posting of this Invoice.
    Please guide me how to solve this issue.
    Thank you very much.

    Hi Lisa,
    Please post your question to the ERP Finance forum (see forum overview) and then I will delete this one here.
    You will find the answer perhaps also if you search, in which case a question is not required
    Let me know,
    Julius

  • How to take reports from miro t-code please explain in a step by step manner?

    How to take reports from miro t-code please explain in a step by step manner?

    I just did as you said (I think), but it's still having the same behaviour as before (same data for all EVS in the table).
    Here´s what I did:
    I
    In node "Detail" (cardinality 0...n, singleton set to true), which is binded to the table, I created a child node named "Column1Values" wth cardinality 1...1 and singleton set to false.
    "Column1Values" node has an attribute called "column1", of type String.
    I did the binding between attribute "column1" and the column1 inputfield celleditor in the table.
    I created an event called Column2Changed and binded it to the column2 celleditor of the table. I added a parameter called nodeElement of type IPrivateCompView.IDetailElement to this event, and mapped it to the column2 editor in the table so that I can dynamically get the nodeElement that is being affected.
    I added the following code to the onActionColumn2Changed(wdEvent, nodeElement) method that gets created in the view:
    IWDAttributeInfo attrInfo = nodeElement.nodeColumn1Values().getNodeInfo().getAttribute("column1");
    ISimpleTypeModifiable siType = attrInfo.getModifiableSimpleType();
    IModifiableSimpleValueSet<String> value = siType.getSVServices().getModifiableSimpleValueSet();
    if(this.initRFC_Input(nodeElement.getColumn2())){
         for(int i =0; i < wdContext.nodeRFCresults().size(); i++){
              value.put(wdContext.nodeRFCresults().getRFCresultsElementAt(i).getId(),
                                  wdContext.nodeRFCresults().getRFCresultsElementAt(i).getDesc());
    And with this, I still get the original problem... When the EVS of one row is updated, ALL other EVS of the table get also updated with the same values.
    What am I missing? Sorry Govardan, I bet I'm not seeing something really obvious... hopefully you can point me in the right direction.
    Thanks!

  • Profit Center is not getting captured in Vendor line item from MIRO.

    Dear Friends,
    Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
    We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
    Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
    I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
    Looking forward for your kind cooperation in this matter
    Thanks & Regards,
    Naveen Kumar.

    Hello Naveen,
    I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
    The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
    About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
    - 826357     Profit Center Accounting and new general ledger in
    I hope this helps. If not, please provide an example of your requirement.
    Thanks and regards,
    Suresh Jayanthi.

  • Session Cookies Being Overwritten Browsing From SSL to Non SSL

    I have created a bug report for this issue as well.
    Please note I am using J2EE session variables so keep that in mind.
    I am seeing session cookies being overwritten when browsing from an SSL connection to a non SSL connection.
    For example:
    Visiting https://www.domain.com/ results in a JSESSIONID cookie being set with details being send for "Encrypted connections only".
    Visiting http://www.domain.com/ results in a JSESSIONID cookie being set with details being send for "Any type of connection".
    Here's the problem:
    Say for example, you're logging into an admin module located at https://www.domain.com/admin/. Once authenticated and some session variables are set, you browse to http://www.domain.com/. When that happens your session cookie (JSESSIONID) is overwritten with a new value and you instantly lose your authentication in the admin module.
    Obviously this is causing massive problems for my clients that bounce back and forth from SSL to non SSL connections which is common for e-commerce websites.
    Steps to Reproduce:
    1. Clear your cookies.
    2. Visit a web page such as https://www.domain.com/. Note the JSESSIONID cookie value.
    3. Visit a web page such as http://www.domain.com/. Note the JSESSIONID cookie value and how it was overwritten.
    This behavior changed in ColdFusion 10. ColdFusion 9 did not overwrite the session cookie.
    Has anyone else experience this?

    Deleting and re-adding my account seems to have fixed it.  I think when I initially added my Google Talk account, it was by using the "Add Jabber Account" under 10.6 or something.  Now, when I re-added my account, I notice both "Google Talk" and "Jabber" are options, so my thought here is that Jabber and Google Talk options are no longer quite the same thing.

  • How create report with data from table and some columns results function ?

    Hi,
    How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
    for example , I want to create a report like that:
    device last_date error_msg stop/start
    kodak1 06/04/08 null >>
    kodak2 08/03/08 good msg --^--
    kodak3 08/04/08 err msg >>
    3 rows returned
    where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)

    Thomas,
    There is no problem here -- this is fully suported scenario.
    1. Bind Table dataSource to Customers node.
    2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
    Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • Report for GR done MIRO pending

    All SAP Gurus,
    Is there any standard Report for GR done MIRO pending?
    Regards,

    hi,
    You can check in two ways:
    1. From table EKBE(Purchasing doc history)
    2. from report ME2N, ME2B, ME2C ....by using the selection parameter as "RECHNUNG"...
    Hope it helps..
    Regards
    Priyanka.P

  • CR XI R1: viewer can't open report with UFL from COM dll

    Hello all!
    I faced the following problem: report which is uses functions from COM dll doesn't works on customer's pc. CRViewer throws exception when calling ViewReport() method. GetLastError() gives just 0 ...
    All other reports without functions from COM DLL are working on that PC however. Moreover, reports which uses function from non-COM DLL are also working.
    Versions & environment:
    - Report file is designed in CR11, CR Developer; Product type: Full, Product Version: 11.0.0.895
    - Runtime files on customers pc installed by .msi created from merge modules for Crystal Reports XI RDC Deployments (latest available SP4 for CR XI R1: [crxi_rdc_merge_modules.zip|http://resources.businessobjects.com/support/communityCS/FilesAndUpdates/crXI_rdc_merge_modules.zip], as listed on [this|http://resources.businessobjects.com/support/additional_downloads/runtime.asp] page)
    - target OS: WindowsXP SP3, all updates are installed
    - i'm using COM crviewer, but there are some points in application where report is opened using CRPE api - it is also crashing on reports with custom functions from COM DLL
    - UFL DLL is registered and loaded correctly (investigated by debug output), looks like crash occured during attemt to call function
    - just for test I tried to install CR Developer on customers PC: it successfully opens all "problem" reports, but the viewer in application still crashing ...
    I would appreciate any tips / suggestions. Please also let me know if I need to specify versions of other products / components.
    Thx,
    Andrew

    Sorry, but you have to define "viewer just crashed". To different people this means different things; error, viewer never shows up, application terminates, etc., etc., etc....
    If the issue is only 10% of computers then it is not
    Re. "...could be caused by:"
    - previous installation of CR8.5 (or earlier) runtime (how to cleanup it correctly?)
    possibly - see below
    - OS configuration (what we need to ajust?)
    probably not - as long as it's the same OS and SPs
    - something missing in our code (but why it works in 90% cases?)
    -no
    - something wrong with CRXI runtime (but we a using latest available MSMs, and again, this works in 90% ...)
    possibly see below.
    I would approach the issue by running [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] and comparing the dlls loading on a computer that works and one that "crashes"...
    Your second utility is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] but ProcMon creates large and difficult to read files.
    Oh, and get the powers that be to start to consider moving away from this legacy "stuff". Like I said, PE APIs have been gone since version 9 of CR and RDC has been retired in CR XI R2 (11.5). Neither product is supported anymore.
    - Ludek

  • Finance document from MIRO

    Hi gurus,
        We want to get finance report by plant so every finance document need to be populated plant field . My question comes from these finance documents generated from other modules such as MM, SD.
    How to deal with it , for example, from MIRO?  Due to technical reason we can not do substitution under complete document for MIRO, how to get plant field?  Thanks.

    Hi,
       I know plant field is BSEG-WERKS.Imagine that after MIRO the finance document is Dr GR/IR
    Cr AP Cr VAT.  My question is how to populate plant field in VAT line item which the value derive from GR/IR or AP. Additionally I am also facing the problem that the plant field in VAT line item is not shown although I have release plant field to optional in VAT account field status. Thanks.

  • Open report file generated from AfterReport trigger fails

    Hi,
    I generate reports files using rwrun.exe.
    In order to know if my report file has been generated without error, I call TEXT_IO.FOpen(..., 'r') into my afterreport to see if any file has been generated.
    It works fine under win2000 but not under Solaris 5.8.
    The report file is generated but for some strange reason TEXT_IO.FOpen( ) generates a non oracle exception -302000.
    Any idea about what happens and how to fix that?
    Thanks,
    Manu

    Hi Sripathy,
    Thanks for your answer.
    In the afterreport trigger, I just open my file as read only to see if it's there.
    The process has just created the file, so, it should be able to open it just to read.
    Anyway, I checked the rights on the file and they are Ok.
    Actually, I think it's a problem with the OS because sometimes, it works fine and the next report, it fails.
    Maybe the file is still "locked" by some other process as I try to read it.
    That's a pain to not be able to check if the report went fine from the afterreport trigger.
    Manu

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • Non SD invoice in COPA reporting and other expenses

    Hi Guys,
    With reference to my previous thread, is it the right way to assign non SD invoice to value fields thru PA transfer structure. What would be the business impact of this. and do we need to do assessment to this PA trasfer structure.
    And how this characteristics are attached to value fields ?
    Thanks and Regards,
    Ram

    Hi ,
    COPA gets values from Billing documents thru Condition Type/Value fields mapping ( KE4I).
    Condition Types are to be mapped with Value fields in KE4I to have the value populated in COPA .
    Values from FI to COPA flow thru PA Transfer Structure .
    Regards
    Sarada

  • How to generate a report in pdf from a stored proc

    Hi, i need guidance on how to generate a report in pdf from an oracle stored proc.
    The environment is oracle 10gas + 10gdb.
    On a specific event, a PL/SQL stored procedure is called to do some processing and at the end of the processing to generate report which has to be sent to the printer (and optionally previewed by the user).
    Can anyone assist me with this?

    Hi ,
    One 'simple' way is by using the DBMS_SCHEDULER db package and the procedure CREATE_JOB(....) using as job_type the value 'EXECUTABLE'...
    Read for further info in 'PL/SQL Packages and Types Reference'.
    If you have access to OEM ... you can configure this there using wizard.....
    Other way is to use the External Procedure call capabiblity of Oracle DB Server...:
    http://www.oracle.com/pls/db102/ranked?word=external+procedure+call&remark=federated_search
    My greetings,
    Sim

  • Crystal Report not running from Addon in the Front End.

    Dear All ,
    There is a Crystal report , .rpt File inbuilt in the Add-on .
    This report runs well from the Source Code .
    But i am facing problem , since it is not Opening at the Front End after registration of the Add0n.
    Suggest what to do ?
    Thanks
    Ashish

    Dear Rahul ,
    In my system , there is a Addon , which has some crystal Report file inbuilt .
    Which run on the Button Click event in the Form at the Front End (SAP GUI).
    When we debug the Source Code and pass the event . . Report Open with no hurdle.
    But the Same thing when we do at the From END of SAP , then it is not Returning any Report.
    Thanks
    Ashish

  • Why can't I print from Illustrator a non-faded print. It always prints as if I wanted a  proof or something.

    Why can't I print from Illustrator a non-faded print. It always prints as if I wanted a  proof or something.

    YOu have not provided any system info, version info or details about your printer. This is not going anywhere beyond stating the obvious - your system is not color managed.
    Mylenium

Maybe you are looking for