Reports 10g: EP-0082: Error executing SCA utility

Report Builder in Red Hat LINUX
Report Builder: Release 10.1.2.0.2
SCENARIO:
The module CUSRR070.rdf exisits in /home/mydir/
File Permissions are 777
During editing I want to back-up CUSRR070.rdf as CUSRR070bak.rdf
When doing File=>Save As, I get this error
REP-0082: Error executing SCA utility.
REP-0110: Unable to open file '/home/mydir/CUSRR070.rdf'.
scaba 12
The trouble-shooting guide sez:
REP-82: Error executing SCA utility
The possible causes of this error include the following:
Case 1: Your initialization file is not current.
Case 2: An abnormal condition.
I DO NOT UNDERSTAND WHAT I AM TO DO
What is the name of the file that is not current?
Any suggestions ?

Sorry for the slow reply. I've been trying a number of different things to get this to work.
I reinstalled Developer as suggested but we don't have a patched version so there were no additional patches to apply. I re-ran the installer anyway to see if it would update anything.
I couldn't find any reference to Developer patches that might fix this issue in metalink.
I also tried messing with the JVM options to give it more memory etc but that didn't help.
After using the Designer diagnostics trace I got the arguments it uses to run the same report from the command line.
This resulted in the same issue. So at least it was consistent from Designer as well as the command line.
This suggests it is a reports issue rather than Designer.
Running the reports trace didn't provide any extra information. Found a bug that suggested changing any formula columns to not return NULL.
Tried updating the report to fix that too but no joy.
I will post here if I discover the solution.

Similar Messages

REP-0066 Error Executing CA utility

Hi all,
When I run the Oracle report in the Reports
Runtime Iam getting this error message:
Rep-0066 Error Executing CA utility
REP-3335 Unhandled Internal CA Error.
calaa1
Iam using Oracle 3.0.
I would appreciate any suggestions to my query.
TIA
sg
null

Hi
Just tried this with Reports 6i patch -11 and I could not reproduce the problme. Is this specific to one rdf only? CA utility error usually means some issue with the memory requirement. Check of your temp directory has enough space left.
Thanks
Rohit

REP-0066: Error executing CA utility, REP-3335: Unhandled Internal CA Error

I had update reports to patchset 11.
then i tried to send a report with email from the previewer.
i get the following error messages:
REP-0066: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxer 1
i tried the second one, it works.
i closed the reports background engine and try it again, the some error.
but with patchset 9 it worked without problems.

Hi
Just tried this with Reports 6i patch -11 and I could not reproduce the problme. Is this specific to one rdf only? CA utility error usually means some issue with the memory requirement. Check of your temp directory has enough space left.
Thanks
Rohit

Report 10g parameter form Error

Hi,
While calling a report I am getting the following error.
REP-546: Warning: The value of restricted LOV parameter TOPROFIT is not among the selectable values.
When I call the same report through another PC it displays parameter form.
I am using Report Builder 10g.
Kindly help in resolving the issue.
Edited by: babarbaig82 on Sep 26, 2012 4:34 AM

Hi,
I need more details.
1- Are you running that report from 2 different machines using Reports Builder? or Reports Server?
2- If running with Reports Builder, is it the same report? or a different version of the report?
Any other details that you think can clarify issue further.
Thanks, Roberto

Problem in report 10g(CA utility)

Hi
I am using forms 10g developer version Forms and reports [32 Bit] Version 10.1.2.0.2 (Production) on
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
In one of my report, when pages of report create more than 70 pages then
it gives following error.(In report6i ,it works sound.)
Error:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxml 2
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
Please help to solve the error.
Regards,
Nirav

Please pass the Strings in single quotes and try running the report again this might solve your issue.

500 Internal Server Error while calling Reports 10g

I am using standalone forms and report services. I am getting intermittently 500 Internal Server Error while calling Reports 10g.

500 Internal error is a generic error and it could be due to multiple reasons like misconfiguration or the dearth of the resources.

Drive has reported a fatal error to Disk Utility, HELP ME PLEASE!!!

I'm a little worried my Macbook Pro has become an overpriced paperweight.
Here's what happened:
I had a spare 512MB RAM, which was taken out of my 24" iMac Intel Core 2 Duo when I replced it with a 1GB RAM and, after checking several sources on the web, successfully installed the extra RAM in the MBP.
I restarted the MBP and the new RAM was registered after checking in About this Mac. I then began using the MBP as normal and wrote and saved a Word document. I clicked on the email and Safari icons in the dock and they just kept bouncing in the dock without launching. Pressed Power button - nothing. Took out the battery and replaced it after 30secs and pressed power button. All I got was the grey screen with the Apple logo and the winding circle which stayed like that for 20 minutes.
First reaction was to remove the RAM and restart. Same endless grey screen and winding circle.
Rebooted from CD, checked disk and repaired and said everything was OK. Restarted without CD still nothing.
Tried Archive and Install and came back with an error during installation.
Tried Erase and Install - same error.
Tried to select startup disk and it no longer could find my HD yet Disk Utility could find it and told me everything was OK. Tried resetting PRAM nothing.
Tried to erase the HD and nothing happened. Erasing a HD takes some time, but everytime I hit erase 10 seconds later it was back to the same point where I began
Next tried to create one single partition and struck the message Drive has reported a fatal hardware error to disk utility. Even the lettering for the main drive is now in red.
Do I need to replace the hard drive altogether or is there a solution to this problem. Was it the RAM that brought me undone or was that just a coincidence?
PLEASE HELP ME!!!

make sure that you haven't used it yet as RAM can only be used in one machine, not transferred to another one (like you did).
Sorry, but that's completely untrue, and I don't know where you might have read or heard such a fallacy. RAM has no registration that even tells a system that it's been used, much less a key that would make it work only in one system. As long as the RAM is properly compatible and precautions are taken not to shock a system with static electricity while removing or inserting the component or causing mechanical damage, a RAM module can be swapped between systems as often as desired.

Problem in report 10g

Hi Everyone,
I am using forms 10g developer version Forms and reports [32 Bit] Version 10.1.2.0.2 (Production) on
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
In one of my report, when pages of report create more than 70 pages then
it gives following error.(In report6i ,it works sound.)
Error:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxml 2
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
Please help to solve the error.
Regards,
Nirav

Try asking this in the Reports forum: Reports

Error executing reports from forms

Hi,
Iam trying to launch reports9i from forms9i,
Iam getting following error,
500 Internal Server Error
java.lang.StringIndexOutOfBoundsException: String index out of range: 0
     at java.lang.String.charAt(String.java:444)
     at oracle.reports.rwclient.ServletCmdMgr.getJobId(ServletCmdMgr.java:3131)
     at oracle.reports.rwclient.ServletCmdMgr.handleCmdGetjob(ServletCmdMgr.java:1255)
     at oracle.reports.rwclient.CommandManager.handleWebCommand(CommandManager.java:92)
     at oracle.reports.rwclient.ServletCmdMgr.handleWebCommand(ServletCmdMgr.java:278)
     at oracle.reports.rwclient.RWClient.handleWebCommand(RWClient.java:915)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1398)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Can anyone help me in this regard,
Thanks and regards,
Avinash,
Pune.
India.

"Iam trying to launch reports9i from forms9i"
your forms version is 10g :-)

FR reports error-5200: Error executing query

I'm working on FR-11.1.1.3.0238 version. i'm facing issues with some of the reports related to planning application db while launching reports in workspace. Where as the reports are opening with out any issues in FR studio and there is no error message recorded in the studio.The error message is recorded in the workspace related log file.
I thought that there might be any pov corruption issue so i ran the ManageUserPov utility as well but there is no luck.
Let me know the cause of this error message and also the resolution for it.
Below is the error message info,
*12-12 09:29:10 ERROR jsp     5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException*
com.hyperion.reporting.util.HyperionReportException: 5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException
     at com.hyperion.reporting.webviewer.WebDynamicReport.execute(Unknown Source)
jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrrunjob._jspService(__hrrunjob.java:1411)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:531)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:459)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:159)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:180)
     at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrcheckforpovorprompt._jspService(__hrcheckforpovorprompt.java:1486)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks in advance
Edited by: kailash on Dec 13, 2012 5:59 PM

Neeraj,
In the FR report server the settings are as you suggested except the TcpTimedWaitDelay = 60, this setting is set to 30.
The same settings are there in Essbase and Planning servers.
So i would like to know what exactly is all about the setting and the possible cause of the problem. It would be very helpful if i can get the cause.
Thanks in advance
Edited by: kailash on Dec 19, 2012 9:03 PM

Executing oraxsl utility through forms 10g

Hi,
I tried to execute oraxsl utility in forms 10g using a button but failed. This utility is working fine when i run it through command line interface, but its not working on forms.
Code on when-button-pressed trriger is :
Declare
cmd varchar2(1000);
Begin
cmd := 'oraxsl d:\cdcataloginfo.xml d:\cdcataloginfo.xsl d:\cdcataloginfo.htm';
message(cmd);
host(cmd, NO_SCREEN );
IF NOT Form_Success THEN
Message('Error - Not Succeeded');
ELSE
Message('Succeeded.');
END IF;
End;
It shows the 'succeeded' message when i run this form, but it doesn't create the HTML file.
Any help will be appreciated.
Thanks.

Using IE 8 and tried on IE 7 as well.
Oracle JInitiator: Version 1.3.1.22Oracle Jinitiator is not compatible with IE 7/8, you have to use the Sun JRE 1.6.0._16 or higher instead. Take a look at section *2.2 Oracle Forms Applications on Client Platforms* in the Oracle Application Server 10g (10.1.2) Certification Matrix.
After installing the Sun JRE 1.6.0, you will need to modify the %DEVSUITE_HOME%\forms\server\formsweb.cfg to set the correct JRE version information. Make the following changes:
# System parameter: base HTML file for use with JInitiator client
#-- Original
#baseHTMLjinitiator=basejini.htm
#-- New
baseHTMLjinitiator=basejpi.htm
#-- Original
#jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
#-- New
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads/index.html
# Parameter related to the version of the Java Plugin
# -- Original
#jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# -- New (this entry specifies update 16)
jpi_classid=clsid:CAFEEFAC-0016-0000-0016-ABCDEFFEDCBA
# OR, you can instruct OAS to use any version of Sun JRE 1.6.0
jpi_classid=clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
# -- Original
#jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# -- New
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,22
# Parameter related to the version of the Java Plugin
# -- Original
#jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# -- New (Specifies update 16)
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_16
# -- OR use any version of 1.6.0
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Error Executing the report

hi ,
I run a report from workspace and it runs fine for me. There is another admin who's trying to run the report and its throws following error for him:
Error 5200: Error executing the query.
We both have same privileges in shared services.
I have created this new report.
Just to let you know it worked fine when i created on 1st day for both of us and is now throing error.
Thanks!

Hi,
Have the other admin turned on the preview option in the workspace financial reporting preferences.
This sometimes can cause problems if it is turned off.
Cheers
John
http://john-goodwin.blogspot.com/

Error executing Query - Workspace report error.

Hi All,
One of our user is getting "5200:Error executing Query" message while running the report in Hyperion Financial reporting workspace,how ever if I run this report with my login on his system I am able to run it.
Could you please put some flash on it what may be the reason behind the same.
waiting for your reply.....
Thanks,

Hi, in general the 5200 error means that the user cannot connect to run the report.
What this means is that the user either doesn't have:
- the necessary Workspace permissions, or
- the necessary data source permissions to run the report. This can either be correct essbase permissions or perhaps the report uses a member they do not have access to see.
I think from memory there should be a Details button on the error message which the user sees which should provide more detailed information. Can you confirm and reply back?
Cheers, Iain

5200: Error executing query: in report (Workspace - Hyp Financial Report)

I tried to open a report in the workspace and this error appeared only in an environment in other open properly, the reports are the same.
Appears Only "5200: Error executing query: in report"
What can I do?

The below link may be provide some insight:
5200: Error executing query: Invalid Item ID. Pls help
Also check log file for details about the error you are getting so as to get more information.

Reports 10g: EP-0082: Error executing SCA utility

Similar Messages

Maybe you are looking for