Reports 6i Not working in Windows 7, 64Bit

Dear,
We have Forms and Reports 6i which is perfectly running its reports in windows xp pc and even in windows 98 pc.
But recently we have installed windows 7 64 bit, but
the reports not working here.
what might be the problem what shall we do to handle this
problem?
Report Version: Report Builder 6.0.8.24.0
Regards,
Stanlee...

Thanks for the Reply...
Yeah i downloaded the ddl files and replaced
the DDL files in the oracle directory Bin folder.
from the below download link.
http://www.orafaq.com/forum/t/124421/0/
Now reports working fine.
Regards,
Stanlee...

Similar Messages

  • Qosmio G40: TV Tuner not working in Windows 7 64bit

    Hi,
    After months of patience and following the drivers-info on the Toshiba website,i found it was time to replaced my Vista32 Ultimate with Windows7 Ultimate. It seemed that all drivers now have a 64bit version working under Windows 7, the missing drivers/software could be replace with the Vista 64bit versions. Unfortunately i got some problems with the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner.
    Just searched a couple of ours for a sollution to the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner (x64) problem with Windows 7. In hardware manager it shows an yellow triangle with an exclamation mark, telling me that there is a problem with the device. Via properties i get an error with code(39).
    I have downloaded the drivers from the Toshiba website which returns the following files:
    tisdbt1a64.cab
    TISDBT1A64.inf
    TISDBT1A64.sys
    and an additional 'setISDBTDriverParameters'-regkey.
    1) When i try to replace the drivers by via the properties in devicemanager, i get a message back that the best drivers are already installed and there is no better driver found.
    2) Install manually
    There are no instructions to install the downloaded files, nor the regkey. When i try to install the 'inf' file with rightclick, i get a installationerror the the selected inf-file does not suppoert this installationmethod.
    3) When i try to use 'install old hardware', the system ends in blue screen when driver is selected and installed. After booting the system again falls into blue screen. So i had to remove the device using 'save mode'.
    4) I also tried to install Vista 64bit, same behaviour as (3)
    5) I tried both TV-Tuner 2_1_11-ISDB-T and TV-Tuner-2_1_1_0. However, imho the former should be used.
    Finally i reinstalled the complete system (from scratch) but same problem occurs.
    Any suggestions? I found different threads about only tips are given. Almost no one describes a working sollution.
    I have not found any sollution

    I have read indicated thread over the weekend. This thread also points to other threads which should have info about correctly installing the drivers. Unfortunately, all these threads points to eachother without really telling how to do a correct installation. Some users seems to be able to use the Vista drivers or the G50 drivers but many others don't. It's strange though, all G40 systems should have the same hardware, no? And after installation of Windows7 they are all equal, no?
    I haven't installed the G50 driver because
    - there is no indication about the type of TV Tuner. I have a TV-Tuner-ISDB-T and it seems that the indicated driver is for the 'TV-Tuner' only (without IDSB-T opton).
    - These drivers are dated 2009 whereas the drivers for G40 are from april 2010.
    (although they have a creation date of march 2007 ???)
    - Other users reports same probs with G50 drivers
    I tried the G40 32bit, G40 64bit (Vista and Windows7) but none of them work. With the Vista drivers I got nothing but blue screens which finally forced me to reinstall Windows7 from scratch. I don't want to go to the process of reinstalling Windows7 from scratch again...
    So, the G40 drivers are published by Toshiba in april 2010. I may trust that these drivers are the ones to be used on my machine? If not, why should i trust all other drivers?
    I have noticed that there was an update installed for both TV- and Fingerprint hardware immediatly after installing Windows7. So after installation of W7 and reboot of the system i was notified that there were some updates which includes an update for both hardware components. I installed all drivers and software from Toshiba website AFTER this update installations. This resulted in a problem with both TV- and Fingerprint hardware.
    In my second attemt to install Windows 7, i tried to block the automatic updates immediatly after installing Windows7. Don't know if it was succesfull because installation started immediatly and i had to 'cancel' the installation. After this 'cancel', i wasn't sure if something was already installed. Nevertheless, at that point (with no other updates installed), i installed all drivers and software from Toshiba website (with no reboot in-between). After this installation i rebooted my G40 and all but TV-hardware worked (including the Fingerprint Reader). Then i tried to update the TV-drivers without any luck, untill this moring...
    This morning I was notified that there were updates to be installed. When i checked out which updates, an update for the TV-hardware seemed to be included. I decided to install this update and guess what... problem is gone!
    So here is the list of my 'scucessfull driver installation' with my wireless internet connection active.
    (Maybe it's a beter idea to make sure the laptop is not connected to the internet!)
    Initial installation:
    1) Install Windows7 from scratch
    2) After initial installation, switch-off auto-updates for windows
    If procedure to install updates is started (otherwise go to 4)
    3) cancell automatic update install, be sure that update TV drivers/Fingerprint Reader are NOT INSTALLED
    (eventually go back to recovery point)
    4) Reboot
    Install all available Toshiba drivers and software
    5) Install all Win7 64bit drivers/software (skip TV drivers)
    6) Install all Win7 32bit drivers/software
    7) Install all Vista 64bit drivers/software
    8) Install all Vista 32bit drivers/software
    9) Reboot
    Install TV drivers
    10) Install regkey 'SetISDBTDriverParameters'
    (= i changed the regkey from tisdbt1a to tisdbt1a64)
    11) update 'TV-Tuner-ISDB-T' driver using 'Hardware Manager'
    12) Reboot
    Windows update installations
    13) Execute windows updates
    14) Reboot
    Repeat 13/14 until TV-driver update is included in the list
    It appears that problems are caused by a windows driver update which is installed for both TV- and Fingerprint Reader hardware immediatly after initial installation of WIndows7. I have no time (use my laptop for work too) to re-test above with installation of Windows7 without a connection to the internet. IMHO this should also avoid installation of the autmatic updates immediatly after initial installation. So, if anyone is trying to follow my steps to do a clean installation of Windows7 on a G40 laptop, please do not connect to the internet when initial installation is in progress. Attach to the interne to perform updates after step 12 and let us know the results.

  • Broadcom 802.11n Network Adapter not working on Windows 7 64bit

    As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium.  I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve.  This however just cropped up after two months of successful use.  Yesterday it started failing to connect to the internet, telling me that no wireless connections are available.  I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360.  I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared.  When I reboot my laptop, all I get is a notification that no networks appear in range.  If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time.  I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that 

    Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
    http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
    All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
    already connected to a wireless network on startup.
    I.a. Disable Device sleep on disconnect
    Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
    well.
    Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
    1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
    2. Double-click on Network adapters.
    3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
    4. Click on the Advanced tab.
    5. Select Device sleep on disconnect.
    6. Set the Value to Disabled. 
    7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

  • Photoshop CS5 updates not working under windows 8 64bit, updates download error

    I´ve changed from Windows 7 32-bit to Windows 8 64-bit. Since this point updates reported download error for all components. I´ve downloaded all updates und saved them. Report is still the same

    doing the cscleanertool helped. everything is ok but the update Pixel bender 2.5. this is still not working but i can live with it. the new Installation with files downloaded from Adobe was also unusable und i switched again to my cd´s. then everything was fine.
    thx for helping
    bye
    tom

  • Flash CS4 not working with Windows 7 64bit and Kaspersky Internet Security

    I have a new i5 core computer running Windows 7 64bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 becomes so unresponsive that it is completely unusable. Uninstall KIS and it works absolutely fine. I've already read on another forum that someone else is experiencing the same issue with the same combination of products. Is anyone else having this problem amd if so how did you solve it? I've posted on the Kaspersky forum with no solution thus far.
    Does Norton work OK with Windows 7(64) and CS4?

    *** PROBLEM SOLVED ***
    Taxxem you are a star. Ideed turning off 'disable external service control' and disabling 'self defense' under 'settings  -options' does indeed bring Flash back to life. Disabling self-defense had the most impact (and causes Kaspersky to grumble somewhat) but disabling external service control also had an impact, albeit much smaller. I'll post this solution against my Kaspersky forum post and hopefully they will do something about it.

  • Crystal Reports 2011 not working in windows 2008 server CITRIX

    Hi All,
    We are using  Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
    We are using .net applicationton to run the reports.
    The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
    OK button is not responding. Cancel button too.
    Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
    Please feel free to ask if required any more details about my problem.
    Regards,
    Venkat.K

    Ido's idea is excellent, only addition I'd like to make is the following:
    You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
    If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Usb ports are not working in windows 7 (64bits)

    hello 
    recently installed windows 7 on my laptop 15-n203tx 
    problem is my usb ports are working great in pre installed win 8.1 but now in win 7 just one port is working and it is usb port 2.0 and other two are 3.0 and not workng plz help me to fix this issue !!
    This question was solved.
    View Solution.

    Hi:
    You need to install this usb3 driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...

  • Sound not working in Windows 7 64bit

    I have an early 2008 macbook pro and I was previously running the 64bit Windows7 RC and the sound worked perfectly well. I did a clean install of the RTM Windows7 Professional and I haven't been able to get the sound to work properly. When I boot into windows there is a red light from the headphone jack and I've tried using boot camp 2.0 drivers as well as the 2.1 drivers for vista 64bit and neither makes the sound work.
    I did notice that if I plugged in my external speakers and put the volume at the maximum that I could hear very minimal sound, but nothing from the built-in speakers.
    I checked the drivers and windows says that the drivers are all up to date and that they are working normally. I even tried erasing the partition and re-installing windows and the result was the same.
    I've looked online and have tried several different suggestions but none of them seem to work. I thought perhaps that the bootcamp drivers didn't like windows7 since the RC was considered by most software as a version of vista, so I tried using vista compatibility mode but it still didn't work.
    Your help would be appreciated.

    I had the same problem. I solved it by using the driver at this link
    http://www.realtek.com.tw/DOWNLOADS/downloadsView.aspx?Langid=1&PNid=8&PFid=14&L evel=3&Conn=2

  • OBIEE 11g BI Admin tool not working on Windows 7 64bit - Any alternative???

    Hi Experts,
    I installed OBIEE 11G on Win 7 64 bit after a long struggle it went well but the admin tool is not starting..........After a search in the forum i came to know that 64 bit os can run obiee client tools. is there any work around for this? I don't want to move to 32 bit os again after taking this much struggle in installation.............can any one suggest me an alternative to work with admin tool. Using VMware 32 bit windows is an option but I don't want to go with it.
    Bellow is the screen shot of the error.
    http://img42.imageshack.us/img42/9389/biadmintoolerror.png
    Thanks in advance,
    DK
    Edited by: user12296343 on Sep 19, 2010 6:28 PM

    "There is currently no standalone, Windows 64‐bit Oracle Business Intelligence Client Tools installer, however the Windows 32‐bit Oracle BI client tools are compatible with 64‐bit Windows platforms per the certification document."
    Source: Oracle Business Intelligence Developer Client Tools Installer (11.1.1.3.0)
    http://download.oracle.com/otn/nt/bi/111130/biee_11.1.1.3_client_install_README_13_JAN_2011.pdf
    The Certification Document: System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
    Tab: Current System Certificatin
    Row: 46

  • Wifi Sync not working with Windows 7 64bit

    Hi, having an issue with wifi sync for some reason.  I am running Win 7 64bit, and I have tried everything on these forums with not luck.  It is not my router because it works on another computer with no problem.  I have enabled all ports, syncserver, etc. and nothing is working.  I have done a complete uninstall, registry clean, and reinstall with no luck.  I have noticed though on my computer when I check the box to allow my wifi sync to be enabled, all the box says is "Sync with this Iphone over....."  It does not say "sync with this Iphone over wifi".  The other computer I tried wifi sync with that worked said "sync with this Iphone over Wifi"  Any thoughts on what would cause my itunes to not display the full message?

    Forgot to mention I am using Itunes 10.6.0

  • Hp support assistant is not working in windows 8 64bit

    Hi, 
    I have a brand new HP Pavillion Notebook , 14-v024. with window 8.1, 64 bit, AMD A8 processor.  I am not been able to open HP Support Assistant.Whenever i click on it a message pops up saying " This application has encountered serious problem click ok to restart" and then nothing happens. I tried to install and unistall HPSFA but the problem persist. It doesnt stop here i believe it some how is related to my wifi settings because alot of times my wifi disconnects and this message pops up. I even had Blue screen of death couple of times now considering it is a brand new laptop i am not happy with it at all. Can anyone PLease throw some light on this issue. 
    Thank you soo much. 

    Hi @Vikz05
    Welcome to the HP Forums! I see that you are having a couple of problems with your notebook. I will be happy to help with the Support Assistant and wireless issues. I am assuming that you tried reinstalling the HPSA from the website link, let's try doing it another way. Use the Recovery Manager to Restore the Original Drivers and Software, install both the HP Support Assistant in this manner and your wireless driver.
    You can also try using the built-in Windows Troubleshooter mentioned in this HP document Troubleshooting Wireless Network and Internet. I also included a number of generic wireless troubleshooting below:
    Power cycle the network:
    1. Shut down your notebook.
    2. Unplug the power to your router.
    3. Unplug the power to your modem.
    4. Wait at least 45 seconds.
    5. Plug in the modem, and wait for it to come back online.
    6. Plug in the router, and wait for it to come back online.
    7. Turn on your notebook, and test your connection.
    Reset the TCP/IP settings:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
    4. Restart your PC and test.
    Reset the winsock catalogue:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
    4. Restart your PC and test.
    Change power management option for your wireless adapter:
    1. Open Device Manager.
    2. Expand the Network adapters.
    3. Right click on the Ethernet/Wireless Adapter and click Properties.
    4. Click the Power Management tab.
    5. Remove the check mark beside Allow the computer to turn off this device to save power.
    6. Click OK.
    7. Test.
    Forget the Network and reconnect (Windows 8):
    1. Press Windows Key + C
    2. Click Settings.
    3. Click Change PC settings.
    4. Click Network on the left.
    5. Click Manage known networks.
    6. Click the network name.
    7. Click Forget.
    8: Reconnect
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Itunes not working on windows 7 64bit

    i have downloaded itunes from apple site and it is installed as well but when i am trying to open itunes it shows "itunes has stopped working"
    check online for a solution and close program
    close the program
    Problem details :
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: iTunes.exe
      Application Version: 12.1.0.71
      Application Timestamp: 54c76235
      Fault Module Name: iTunes.dll
      Fault Module Version: 12.1.0.71
      Fault Module Timestamp: 54c7621b
      Exception Code: c000001d
      Exception Offset: 0000000001503200
      OS Version: 6.1.7600.2.0.0.256.48
      Locale ID: 1033
      Additional Information 1: d7f7
      Additional Information 2: d7f7cf25a9f5db8bfc52c27417244498
      Additional Information 3: 124a
      Additional Information 4: 124ac5bb1d54a8df7aef83e35cc0ebcb
    please advise what should i do now....

    Hi Rathore123,
    I'm sorry to hear you are having these issues with iTunes. If you continue to have issues installing or launching iTunes on your Windows machine, you may find the info and troubleshooting steps in the following articles helpful:
    If you can't install or update iTunes for Windows - Apple Support
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    Regards,
    - Brenden

  • 11.1.4 and 11.1.5 not working in windows 7 64bit

    I updated to 11.1.4 and experienced the same problems as many others- uninstalling and re installing eradicated the error messages but the store never opened and my phone would not sync.
    I've up graded to 11.1.5 and now it is freezing, crashing- including the laptop and the problems with the store and phone remain- my phone shows an error message saying it is unsupported- is this because it is a standard 4?
    Any ideas?
    SisterM

    When do you see that error message, when you update or launch iTunes? And does QuickTime launch normally.
    What versions of iTunes and QuickTime Player are installed on your computer? We'll want to get iTunes updated to 11.1.5, and Quicktime Player updated to 7.7.5.
    This Apple doc also has info that can help -> iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

  • Flash Player (11.4.402.278) not working on Windows 7, 64bit, IE9.

    I can install and uninstall Flash, but I cannot locate it or use it once on my PC. Help appreciated, thanks.

    Hi Pat,
    Thanks for the reply. I can see the Flash animation in your link and I'm running the latest version of Flash for Windows 7. I have been over the other two link you posted and:
    - All the plug ins are working.
    - Shockwave is enabled.
    - ActiveX Filtering is disabled.
    - All clips on youtube and facebook work fine.
    So for all intenets and purposes, Flash is working. The problem I'm having is locating Flash Player on my PC and choosing it to open a program with. How do I open a program/file with Flash?
    These are the files I have...

  • Palm Desktop 6.2.2. and Lookup function not working in Windows 7

    Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
    Post relates to: Centro (Verizon)
    This question was solved.
    View Solution.

    I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

Maybe you are looking for