Reports 6i windows display problem on Windows NT system

Iam using Reports 6i on Windows NT.All the reports 6i windows are became transporent windows, displying problem (repainting problem). I did fresh installation. But iam not able to solve this.

I am using same fonts on all these plateforms.Look more closely at those fonts. They may have the same names, but the Windows 2000 versions may be larger (able to render more characters).

Similar Messages

CR 2008 UI display problems on Windows Vista

Hi all,
I have just installed CR 2008 SP2 on my Windows Vista PC, and I am intermittantly having UI display problems when I go between "Design" and "Preview" views of my reports. It seems most often that the "Design" view has the screen redraw problem, in the left-hand sction where is shows Groups / Parameters / Find results. It basically fails to redraw the screen in that area, showing what was on the screen before.
I had previously run CR XI on this workstation with no problems.
Is this a known problem, or does anyone have any suggestions?
Thanks,
Will

Hi Will,
Your monitor size does not matter, unless it's very low resolution, big issue is the drivers they use and something like this is typical of driver problems. My son is gamer and he finds problems like this all the time, even between different versions of the the updated drivers.
If you don't want to update those drivers CR can not add code to work around a buggy video driver. You can always un-install them if they break something else.
You don't need the CD/DVD to do a repair install, go to Control Panel, Add/Remove Programs and select Crystal. It should give you an option to repair.
Thank you
Don

Lion Finder active window display problem

I'm running 10.7.3 on my MB Pro. I have all the latest-and-greatest updates. However, this quirk only started to appear with Lion and has appeared in all versions to date. I'm wondering if I'm the only one who has this problem.
Here it is: Whichever Finder window that is active used to pop to the front (or "on top of") of all other windows, but often I find that this is no longer the case.
Example #1: If I have two windows open and I'm dragging a file from one to another, the dialog box that asks if I want to copy the file often stays buried beneath one/both other windows.
Example #2: If I go to drag a file from one window to another window hidden/buried under the first one, it used to be that if I held the file to be dragged over the buried window that it would become "active" and thus move to the front, but now this is often not the case.
Example #3: If I go to cycle through open windows using Cmd ` in order to find a buried window, often the buried window will not move to the top.
In all these instances, even using Expose to show open windows will not bring the desired window to the front. I was hoping that this bug would be noticed in 10.7.0 and be corrected by now, so either it's a bug or maybe I've got something set up wrong. Somebody enlighten me!

I've had the exact same problem with Lion. Telephone support told me to reinstall OS X Lion, which didn't help. The genius at the Genius bar told me it was my 3rd party (Kingston) RAM. He demonstated the display was fine without the extra RAM, but he was using a USB mouse with a scrollwheel. At home, my bluetooh magic mouse continued to cause the same problem, and so did my trackpad. So I determined it had to do with the faster (and different type of) scrolling that these newer devices perform. I then saw that if I use the slider on the right side of the finder window instead of gesturing with the mouse or trackpad it works fine.
So I played with my settings a bit to see if I could overcome this problem, and found a solution. I went to "Preferences-General-Show scroll bars" and changed from "Automatically based on input device" to "Always". This nearly fixes the problem! At least so far. I get an occasional glitch if I scroll up and down a lot, but way less frequently than when its set to the default "Automatically based on input device". This must be due to the new disappearing scrollbar "feature" in Lion. Nicely done, Apple!

Screen Display Problem in Windows 7 OS

Hello Gurus,
I have a scenario for creating sub screen area in sales order 'Additional data B' tab.I created screen and its working fine.But problem is if open sales order in Windows XP system its displaying screen properly,but if i open same thing in windows 7 screen is not showing screen completely. Sub screen is displaying only 70%. I thought it is issue on SAP GUI side.But am not able to find a solution.Please help to solve this issue.
Thanks,
Chittoor.

Hello.
As Miguel mentioned, it might be because of different screen resolutions.
I feel this is one of the drawbacks in SAP screen developments. There is no way we can develop a screen that looks uniform across all screen resolutions which is possible with web application programming.
I would suggest you to develop the screen in a resolution that is most common across PCs and layout various screen elements from the left end of the screen.

RemoteFX Display problems with Windows 8.1 VM but not with Windows 7 VM running on Hyper-V VDI Server 2012R2

Has anyone seen anything like this?
After many, many, hours of wading through and eliminating potential variables the issue has been narrowed down to being present with a Windows 8.1 VM and not on Windows 7 VM.
The problem is with glitchy display issues (Random Pixellation, Fuzzy Screen areas, Entire Screen filled with random shapes/colors etc.).
This is a Server 2012 R2 environment it is running Hyper-V Remote Desktop Virtualization Host.
An Nvidia Quadro K2200 adapter has been enabled for RemoteFX and passed through.
Also have tried Nvidia Grid K2 adapter. Both adapters use same driver set and multiple driver versions have been tested.
Two Generation 1 VM's have been created. One for WIndows 8.1, One for Windows 7. All updates installed.
Each VM uses the same set of Hyper-V resources, Virtual Switch etc. (The settings for each VM are the same).
With RemoteFX disabled on each VM the issue is not present on either VM.
With RemoteFX enabled on each VM the issue is present on the Windows 8.1 VM and not the Windows 7 VM.
There is no difference if only one VM at a time is enabled and running. (Not GPU load related)
Talmage D. Holt

Hi,
Generation 2 virtual machines have a simplified virtual hardware model, and supports Unified Extensible Firmware Interface (UEFI) firmware instead of BIOS-based firmware. The majority of legacy devices have also been removed from generation 2 virtual machines.
You can check below article might helpful for your case.
Generation 2 Virtual Machine Overview
https://technet.microsoft.com/en-us/library/dn282285.aspx
RemoteFX vGPU Improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RemoteFX Display problems with Windows 8.1 VM but not on Windows 7 VM. Both running on Hyper-V VDI Server 2012R2

After many, many, hours of wading through and eliminating potential variables the issue has been narrowed down to being present with a Windows 8.1 VM and not on Windows 7 VM.
The problem is with glitchy display issues (Random Pixellation, Fuzzy Screen areas, Entire Screen filled with random shapes/colors etc.).
This is a Server 2012 R2 environment it is running Hyper-V Remote Desktop Virtualization Host.
An Nvidia Quadro K2200 adapter has been enabled for RemoteFX and passed through.
Also have tried Nvidia Grid K2 adapter. Both adapters use same driver set and multiple driver versions have been tested.
Two Generation 1 VM's have been created. One for WIndows 8.1, One for Windows 7. All updates installed.
Each VM uses the same set of Hyper-V resources, Virtual Switch etc. (The settings for each VM are the same).
With RemoteFX disabled on each VM the issue is not present on either VM.
With RemoteFX enabled on each VM the issue is present on the Windows 8.1 VM and not the Windows 7 VM.
There is no difference if only one VM at a time is enabled and running. (Not GPU load related)
Does anyone have any ideas?
Talmage D. Holt

Hi,
Generation 2 virtual machines have a simplified virtual hardware model, and supports Unified Extensible Firmware Interface (UEFI) firmware instead of BIOS-based firmware. The majority of legacy devices have also been removed from generation 2 virtual machines.
You can check below article might helpful for your case.
Generation 2 Virtual Machine Overview
https://technet.microsoft.com/en-us/library/dn282285.aspx
RemoteFX vGPU Improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Outlook window display problem

Hello,
My Outlook window has turned weird... I can't access the left handside commands (see below) and the window would not resize anymore. Any idea what may be happening? I am running Mavericks and Outlook 14.3.8...
Thanks!
Olivier

I have exactly the same problem with annoying window problems after Mavericks update. Was definitely not a good idea to update to Mavericks Have tried all the other fixes (resolution, killing, other user...) but no fix found. I have tens of gigs of e-mails, some of them on my hard drive, some of them on the server. What would be the best way to "recreate the user account" and get my e-mails, applications and other files smoothly back in use? Thanks for the help!
Best regards,
Otto

DW8 CSS Window display problem

Paging the font of all knowledge!
In my CSS display window I have lost the 'tree' display -
it's now
showing the individual properties per item in a grid box -
how do I get
the original tree display back??
TIA!
Buzby
"There's nothing more dangerous than a resourceful idiot"

Mark A. Boyd wrote:
> Buzby posted in macromedia.dreamweaver
>
> > Paging the font of all knowledge!
> >
> > In my CSS display window I have lost the 'tree'
display - it's now
> > showing the individual properties per item in a
grid box - how do
> > I get the original tree display back??
>
> Do you see two buttons, [All] and [Current]? If so,
click on [All].
>
> If you have already done this and still can't see the
tree underneath
> "All Rules", you may need to drag the 'Properties for
"whatever"'
> down.
Ha! Easy when you know how - thanks very much!
Buzby
"There's nothing more dangerous than a resourceful idiot"

Display problem dragging windows

When I drag a window across the screen it leaves ghost images behind. See the attached image. This problem just started recently with no apparent cause.
This is a 13" MacBook Pro running OSX 10.6.8
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i5
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.68f99

Start with the basics;
SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/PH14222?viewlocale=en_US
A safe boot:
http://support.apple.com/kb/HT1564?viewlocale=en_US
If no success, make an appointment at an Apple store genius bar for a FREE diagnosis.
You also might run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
Note that an error free AHT is not definitive.
Ciao

Custom report outer-join display problem

I have written a custom report for Grid that produces info on database options, combined with info on the hardware of the servers where the databases reside. It is a customer requirement that all output be displayed as one huge table, with duplicate cells where logic dictates... so I've used a couple of nested queries + outer joins.
My SQL query provides the correct data, however Grid appears to be acting clever, and instead of displaying one big table with duplicate values where required, it is splitting the output into a series of tables.
It might look neater, but it's not what I've been asked to provide.
Is there anything I can do to prevent this, and force Grid to display the info as one table?
Thanks,
Chris

Hello Chris,
did you already try to create a View based on your query and use this view in a Report Element?
Regards
Rob
For more info, tips and tricks on oem gc check: http://oemgc.wordpress.com

Windows 7: probleme de "windows installer" lors de la mise à jour itunes10.5. La mise à jour ne peut donc pas se faire.

Clic sur mise à jour itunes 10.5.
L'installation est stoppée car une erreur -42032 s'est produite avec windows installer.
Je ne comprend pas : toutes les mise à jour "windows update" sont ok.
Que puis-je faire ?

Clic sur mise à jour itunes 10.5.
L'installation est stoppée car une erreur -42032 s'est produite avec windows installer.
Je ne comprend pas : toutes les mise à jour "windows update" sont ok.
Que puis-je faire ?

CR for Eclipse version 2.0.1 Report JSP page display problem

I create report and Report viewer JSP page. When i run JSP page I meet with this [screen|http://www.sendspace.com/file/r2ys55]. When I select print preview the [screen|http://www.sendspace.com/file/4661oa] like this.
I use CR for Eclipse all in one pack 2.0.1.
Anyone know what is the problem ?
Any help would be greatly appreciated.
Thanks;

Yes, we are. We have to set the password unless there is a way to save the password in the report. The CR designer always asks for the password. Is there away to save the password in the report from the designer?
Do you have an ETA on the bug fix?
It is good to know the problem is being looked into.
Thanks,
GregD

Windows 7 64 bit on iMac display problems and instability

I received my iMac 27" quad core with 8 gig ram & 2 x 1 TB hard drives last Friday. I'm using Boot Camp to run windows 7 64 bit on maximum 2560 x 1440 screen resolution.
I get intermittent but often display problems in windows 7. I get areas of the screen covered in little yellow dots or blue squares (never red artefacts.) This will happen at random areas of the screen, inside an open window, around borders of windows and so on. Most often the screen will go black and come back with a message in the bottom right corner of the screen saying 'Display driver has stopped responding and has recovered' with the sub message saying 'display driver ATI radeon family stopped....etc'. Sometimes I lose the screen wallpaper. Once I've had the system just shut down, once I've had Photoshop seize up and I had to do a cold reboot. Could this be an overheating problem or resolution too high problem or driver problem? Windows 7 tells me my drivers are up to date. I tried installing the drivers for the card from ATI's website which made no difference
The reason I bought a Mac is because it's the only effective way to code for the Mac family of OS's in XCode. The reason I didn't just attach a miniMac to my PC monitor was because there's rather a lot of advertising by Apple about the fact that you can use a Mac with a PC OS via Apple's own Boot Camp. Now I have a lot of Windows software (some of which is not available for the Mac or requires buying again) sitting on an unstable system. Any ideas would be much appreciated...

Sorry, that thread got moved for edit and as a user tip... which I didn't want and won't be doing....
Here is the post:
A tip and workaround for how to get ATI mobility/laptop drivers so that Windows no longer thinks the ATI is a desktop card:
http://discussions.apple.com/thread.jspa?messageID=11286987
Summary (my own edit steps):
1. Install Boot Camp 3.0 and upgrade to 3.1
2. Uninstall graphic drivers and run Driver Sweeper
http://www.guru3d.com/category/driversweeper/
instead of:
removing the crashing driver by going into windows 7 setup via its install cd and deleting the ati driver manaully
3. Install ATI Mobility (link)
4. Uninstall ATI (Programs control panel?) Device Manager (rollback; uninstall?)
5. Device Nanager: update driver and BROWSE BACK to 8.681 (the original apple driver that was causing freezes and purple artifacts) - navigate to /Apple/Drivers/ATI
(Apple uses) a 4850 card in the iMac, its modified a bit for apple. Enough that desktop drivers don't work, and modded-for-laptop desktop drivers don't work either.
Now the upshot of using modified drivers is that it FORCES the catalyst control panel to be installed, meaning you get a few more options to mess around with the card.
I couldn't use the original apple drive, it locks up, the newer one had banding, the newer radeon drivers direct form ATI wouldn't work until they were modded and then they cause black screens.
SO the solution, as obscure as it was, was to download ACTUAL mobility Radeon drivers - version 10.3 still, but made for laptops.
http://support.amd.com/us/gpudownload/Pages/index.aspx
THESE drivers I was able to install - and here is where things changed.
THIS driver changed they way windows saw the video card in device manager.
As I mentioned before, its NOT a desktop card, its a modified laptop card, but installing mac drivers makes windows THINK its a full desktop card, and running the original 8.681 driver crashed it.
Once installed 10.3 LAPTOP driver it now appeared in device manager as a MOBILITY card.
+These Steps "should" work:+
delete ATI driver manually
reinstall apple driver after that and see if that works,
otherwise try the steps above
(mod drivers, remove via windows recovery off setup disk, install laptop drivers, reinstall apple driver over it)

Safari loads but no window displayed,

Safari seems to load but no window displayed. New Window doesn't help. Loading from Application folder, no difference. Yesterday I loaded an application DataGuardian, thought that might be confilicting so I removed it, no difference. Have rebooted several times. Looked for changes to system by date, no clue. Need a solution that doesn't require a web browser. I'm sending this from a different machine. THanks.

Welcome to Apple Discussions
You may have a corrupted preference file. Move to your Desktop from your User Library/Preferences folder .com.apple.safari.plist and restart Safari. Any change? If you now get a browser window, then reset the Preferences to your custom settings. If not, move the above file back to its original location replacing the newly created file.
If no change, does the same problem occur if you open Safari from another User Account (create one if necessary in System Preferences>Accounts).
Post back with results.

Blank window displayed

Hi,
I am developing an application on NWDS 7.1.
In the application a main window displays a modal window on some user action. When the user closes the modal window, the main window does not get displayed. Only a blank is shown. I can see the main window only on refresh the screen.
Do I need to add any extra code for 7.1?
Regards,
Rahul

hi,
I understand you are using a modal window, hence you must have created another window which will act as the modal window. Now in the main window(view of the window), you may have a button which will create a modal window. This button will be in the view of the main window. Now add the code int he method in the component controller. and call this method in the onActionCreateModalWindow action created in the view of the main window. :
First declare,
//@@begin others
IWDWindow modalWindow;
//@@end
Then
public void createModalWindow( )
    //@@begin createModalWindow()
    //creating the window
    IWDWindowInfo winInfo = wdComponentAPI.getComponentInfo().findInWindows("NewPopWindow");
       modalWindow = wdComponentAPI.getWindowManager().createModalWindow(winInfo);
    //display window in centre
    modalWindow.setWindowPosition(WDWindowPos.CENTER);
    modalWindow.setTitle("Modal Window");
    modalWindow.setWindowSize(400,100);
    //opening the window
    modalWindow.show();
    //@@end
Now, create a button in the view of the modal window. Say Back(to return to the main window).Add the coding in the method created int he component controller and call this method, in the onActionBack method in the view of the modal window.:
public void destroyModalWindow( )
    //@@begin destroyModalWindow()
    modalWindow.destroyInstance();
    //@@end
regards,
pinki

Reports 6i windows display problem on Windows NT system

Similar Messages

Maybe you are looking for