Reports 9i Portlet

Hi,
I have a portal page in which I have created a oracle reports 9i portlet that is .pdf format.
The problem is that the adobe box that comes up in my region is very small. Is there anyway to make this bigger??
I've tried making the region bigger but it still displays really small.
Thanks.

Similar Messages

Problem configuring the OBIEE Report Viewer Portlet to Oracle Portal!

Now we plan to configure the OBIEE Report Viewer Portlet to Oracle BIEE.what i refre is http://www.rittmanmead.com/2007/09/integrating-oracle-bi-answers-and-oracle-portal/
But after i deploy it and add the biee portlet to oracle portal and enter the biee reoprt path,tell me the error '(500)Internal Server Error '
I have check the applicaion.log,the error below:
11/12/18 00:55:26 BIEE: [id=84609988305,3] EXCEPTION THROWN: Exception:
org.apache.axis.ConfigurationException: No service named SAWSessionServiceSoap is available
org.apache.axis.ConfigurationException: No service named SAWSessionServiceSoap is available
at org.apache.axis.configuration.FileProvider.getService(FileProvider.java:233)
at org.apache.axis.AxisEngine.getService(AxisEngine.java:311)
at org.apache.axis.MessageContext.setTargetService(MessageContext.java:755)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at com.siebel.analytics.web.soap.SAWSessionServiceStub.impersonateex(SAWSessionServiceStub.java:540)
at com.siebel.analytics.web.portlets.jsr168.SAWConnection.init(SAWConnection.java:80)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWConnection(ReportUI.java:911)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWPage(ReportUI.java:1016)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doViewIFrameWithActionLinks(ReportUI.java:428)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:178)
at javax.portlet.GenericPortlet.doDispatch(Unknown Source)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doDispatch(ReportUI.java:1058)
at javax.portlet.GenericPortlet.render(Unknown Source)
at oracle.webdb.wsrp.server.Server.getMarkup(Unknown Source)
at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Tie.invoke_getMarkup(WSRP_v1_Markup_PortType_Tie.java:224)
at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Tie.processingHook(WSRP_v1_Markup_PortType_Tie.java:499)
at com.sun.xml.rpc.server.StreamingHandler.handle(StreamingHandler.java:230)
at com.sun.xml.rpc.server.http.ea.JAXRPCServletDelegate.doPost(JAXRPCServletDelegate.java:153)
at com.sun.xml.rpc.server.http.JAXRPCServlet.doPost(JAXRPCServlet.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(Res
ourceFilterChain.java:65)
at oracle.webdb.wsrp.server.ContextFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(
ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forward
Internal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processReques
t(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequest
Handler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequest
Handler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWork
er.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
at org.apache.axis.configuration.FileProvider.getService(FileProvider.java:233)
at org.apache.axis.AxisEngine.getService(AxisEngine.java:311)
at org.apache.axis.MessageContext.setTargetService(MessageContext.java:755)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at com.siebel.analytics.web.soap.SAWSessionServiceStub.impersonateex(SAWSessionServiceStub.java:540)
at com.siebel.analytics.web.portlets.jsr168.SAWConnection.init(SAWConnection.java:80)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWConnection(ReportUI.java:911)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWPage(ReportUI.java:1016)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doViewIFrameWithActionLinks(ReportUI.java:428)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:178)
Then i goolge,and find the likely error at https://kr.forums.oracle.com/forums/thread.jspa?threadID=875397
But after i change the portlet.xml and web.xml and restart the oc4j_portal,still face the same error
I don't know how to resolve the problem
Anyone can help me ?
I have wait about 15 days,but still can not find any useful solution!
'

the web.xml under oc4j_portal/portal below:
$ more web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2/dtd">
<web-app>
<distributable/>
<listener>
<listener-class>oracle.webdb.portal.servlet.PortalServletContextListener</listener-class>
</listener>
<servlet>
<servlet-name>RepositoryServlet</servlet-name>
<servlet-class>oracle.webdb.repository.servlet.RepositoryServlet</servlet-class>
<init-param>
<param-name>logmode</param-name>
<param-value>error</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>PortalServlet</servlet-name>
<servlet-class>oracle.webdb.portal.servlet.PortalServlet</servlet-class>
<init-param>
<param-name>logmode</param-name>
<param-value>error</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>page</servlet-name>
<servlet-class>oracle.webdb.page.ParallelServlet</servlet-class>

<init-param>
<param-name>jspRoot</param-name>
<param-value>internal_jsp</param-value>
</init-param>
<init-param>
<param-name>jspSrcAlias</param-name>
<param-value>/internal_jsp/</param-value>
</init-param>
<init-param>
<param-name>useWebCache</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>maxParallelPortlets</param-name>
<param-value>20</param-value>
</init-param>
<init-param>
<param-name>maxParallelPagePortlets</param-name>
<param-value>10</param-value>
</init-param>
*<init-param>*
*<param-name>resourceUrlKey</param-name>*
*<param-value>0123456789</param-value>*
*</init-param>* </servlet>
<servlet>
<servlet-name>apploader</servlet-name>
<servlet-class>oracle.webdb.apploader.AppLoaderServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/pls/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/page*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/event*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/witness/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>apploader</servlet-name>
<url-pattern>/apploader</url-pattern>
</servlet-mapping>
<context-param>
<param-name>oracle.webdb.service.ConfigLoader</param-name>
<param-value>/WEB-INF/wwjps.xml</param-value>
<description>This parameter specifies the location of the JPS configuration file</description>
</context-param>
<context-param>
<param-name>oracle.webdb.portal.PortalServletContextListener.logmode</param-name>
<param-value>error</param-value>
<description>This parameter specifies the logging mode for the context listener</description>
</context-param>
</web-app>
$

Discoverer reports in portlet

Hi All!
Will anyone help me to solve the following problem?
There are several Discoverer reports based on database records. It's necessary to put them in a single portlet. I've tried to create a portlet provider and URL portlet, but there is the requirement to identify the parameter names the Discoverer form accepts in provider.xml file. Actually there is a large number of them, and I just can't imagine the whole set of them, so it looks like a problem.
Are there any other ways to put these reports in portlet?
Thanks in advance.

i have the same problem, i need to put the discoverer report in portlet, how i can do this?
reply me via e-mail
[email protected]

Oracle Forms and Oracle Reports as portlets

Please, where can I get the documentation to publish Oracle Forms and Oracle Reports as portlets. I found some information about it in metalink but the URLs are invalid.

Hi,
Here are the steps you need to follow while building Portlets .
1) After creating a Application,in the last step click on the Checkbox 'EXPOSE AS PROVIDER'.
If the application has already been created ,click on the same checkbox in the grant access section.
2) When creating a component within the application ,select the checkbox 'PUBLISH TO PORTAL'.
Incase ,you have already created the component then just click on the same option in the grant access section.
Now when you want to add these portlets to be part of a page .Just select the provider(Application) and the portlets under it.
Hope this helps.
Anu

Error Running Reports as Portlet in Oracle AS 10g

#First, I create the report server using Reports Server Access Portlet (Administration> Oracle Reports Security Setting)
When defining the Server Name and Printers, I fill the fields like this:
Display Name : MY_REPORTS_SERVER
Reports Server Name : myserver
Oracle Reports Web Gateway URL for JSP reports : http://stts:7778/
Oracle Reports Web Gateway URL for RDF reports : http://stts:7778/reports/rwservlet
#Second, I create the report definition using Reports Definition File Access portlet
Display Name : myreport
Reports Servers : MY_REPORTS_SERVER
Oracle Reports File Name : test.rdf (default report sample)
Execute : via servlet
#The problem is.....
When I tried to run the report by clicking Run / Run as Portlet link, the report doesn't show up.
Then, I rightclick-View Page Source on the page
<iframe name="iFramePortlet"
src="http://sttsstts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach....
I found that the src tag is doubling my computername into sttsstts, it supposed to be stts only.
How come this happen???
I already tried to change server definition into
Oracle Reports Web Gateway URL for JSP reports : http://localhost/
Oracle Reports Web Gateway URL for RDF reports : http://localhost/reports/rwservlet
but the when tried to run the report again, the src still added by computername become:
src="http://localhoststts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach............
plaease help me...
Thanx before,
Chris

Hi,
I found two Metalink Notes that could of use to you :-
Metalink Note:230544.1 :- How To Install And Configure OSA AS Portlets (Main Document)
Metalink Note:247595.1 :- Installing AS Portlets 1.0 with OFA or OSA Version 6.4
Regards,
Sandeep

Drill down reports in portlets

I am using portal to create an MIS reporting system. I want to create drill down reports however if I try to drill down from a report portlet the other report does not show up in the same region or even on a page of that page group. Instead it uses the template specified for the report. Is there a way to drill down from one report portlet to another?

Hi Prashant,
You can try T code CJE0 - report 12KST1G . Here at least you remain in the screen of CJE0 instead of going to SAP menu after exit from the report. But this also doesn't solve your problem.
I have checked transaction code S_ALR_87013534. It is giving same problem. As suggested by Shrikant , you can raise OSS note to SAP.
Regards,
Amit More

Microsoft Reporting Services portlets

Hello Everyone
We created some portlets that show some nice charts from Microsoft Reporting Services.
The issue that we are having is the Export option
When we select the Export option, the javascript includes the root call
For example, the Reporting Services website has http://servername/Reports/Default.aspx
The charts on the portlet shows OK
When we are trying to use the Export function there is some javascript there that includes /Reports/ExportFunction.aspx?OUTPUT=PDF
When I have the gateway, I end up with http://portalserver/Reports/ExportFunction.aspx?OUTPUT=PDF instead of the gateway call.
Do you know how to fix this?

do you have the ability to modify the javascript file? if so, you'll need to ensure that all links in external js files contain links that are gatewayed properly.
i'm not sure i do it the most official way, but what I usually do is just have a hidden link somewhere in the portlet that will get gatewayed, and then grab the base url of that in javascript and use it to create gatwayed links.
(in portlet)
a href=/myapp/ id="mycoollink"
(in js)
var mylink = document.getelementbyid('mycoollink').href + "\xsrf.js"
..or soemthign liek that
OR move all the JS to the imageserver and point to it there

Reports in portlet region (Portal)

Hello!
I have a report that have a link to another report and is integrated to Portal, but when the second report is called it was displayed in all the page and i want that is displayed in the portlet region, what i have to do to display the second report in the portlet region over the first report?
mi call to 2nd report is this:
function F_DEPTNOFormatTrigger return boolean is
begin
SRW.SET_HYPERLINK('http://<host>:<port>/reports/rwservlet?prueba2&report=Prueba2&deptno='||:deptno );
return (TRUE);
end;
thanks a lot!

hello,
you did not specify which version of the application serve we are talking about. i assume 9.0.2, since you are describing an in-line rendering of the report content.
in 9.0.4 we moved to using iframes to do the portlet rendering (if your browser supports it) as iframes allow you in-line linking, meaning the called report will render inside the portlet. in 9.0.2 this is not possible.
thanks,
ph.

How to Insert using QBE report in portlet?

[This is using the latest version of Portal, 9.0.2]
I have created a portlet which is based on the Report QBE.
It displays fine, with Update and Delete columns/links for each row.
However...
When I created the portlet, I specifically said I wanted to display the Query, Reset and Insert buttons in the "Customization Form Display Options" Button Options. When I click on "Customize" from the Develop tab for my portlet, it shows the full page customize, which includes these buttons. But when I add the portlet to a region, and then click on its Customize link (to the right of the portlet's navbar), the resulting customize page does NOT show these buttons.
How do I get Insert functionality working from a portlet? Do I have to do something more to make the portlet customize page show the necessary buttons?
I feel like I may be missing something obvious (again!), but I can't figure it out, and I've looked in all the places I can think of.
Help much appreciated...
Regards
Bryan

You are not 'missing something obvious' , this is how it works. The insert option is not available for qbe reports as a portlets. Reason being that you may not want all users who are able to customize the report to insert data into the base table.
For insertion of data use a form portlet or a link on one of the qbe columns.
Sunil.

Publishing rdf reports as portlets

Hi!
I have registered my Reports Server and some RDF reports. I can run them from the report definition(run, run as portlet and customize), but I can4t publish them as portlets.
Also,I have created some components for the application that contains the reports.
When I go to the Portlet Repository, I can see that components but not the reports.
Any idea??????
Adrian

Hi Renato!
Thanks for your help.
I'm using .RDF reports created with Reports Builder and publicated on a Oracle Reports Server 6i(and not Portal Reports Wizards). I don't have problems with Portal reports.
I suppose you can't copy a "RDF registered report" to another application because it has information of the Reports Server. However, I tried it and I got the next error:
Unexpected error encountered in wwsec_api_private.set_user_acl (ORA-01403: no data found
ORA-01403: no data found
ORA-06512: at "PORTAL30.WWSEC_SYSP_BRI_TRG", line 3
ORA-04088: error during execution of trigger 'PORTAL30.WWSEC_SYSP_BRI_TRG') (WWC-41417)
Failed to save attribute P_OWNER, value PORTAL30_DEMO (WWV-13413)
Attribute ID: does not exist (WWV-12905
I don't see the "rdf registered reports" like components of my application(Navigator). Should I??????
Any idea??
thanks,
Adrian

Put Oracle Report in Portlet

I have developed a Oracle Report which can display through the web browser. How can I put it in a Portlet?
Do I have to add any provider ?
null

hello,
unfortunatly, there is no built-in way in 6i to display a report inside portal. you will have to use the URL portlet (is part of PDF available here on OTN) to display the report.
regards,
the oracle reports team

How to Publish Report as portlet?

Hi,
after creating a report within an application, how can I publish this component as a portlet. In the "Manage" Tag of the report, the option "publish as report" is not there. Do I have to create a "Provider",and if so, how can I do it?
Thanks.

You will first have to expose your application as a provider. You can do this from the grant access tab of the application. Then you should be able to see the "publish as portlet" option for your report.

Passing parameters from portlet reports to portlet forms

Hi,
I'm tring to pass parameters between a Report displayed as a portlet in a page ( page 1) and a form displayed in other page ( page 2).
The problem is i can't do this.
I only can pass parameters from a report ( running as normal or in a portlet displayed in a page) to a form running "normal" by using application links. Can i do this between a report that show's me every employees of scott.emp table. Then when i click on each employee, it open's me another page with the portlet form of the specified employee.
I'm not sure i made myself clear. Please send me some feedback.
Pedro

I have the same problem. Please let me know if this could be done.
In particular my form is a type of "Form on Table/View."
Thanks
Henry

How to embed the WEBI report as portlet

I am a fresh man of WEBI.
I want to know how to embed the WEBI report to a web page as the portlet (like weblogic portal).
I have used the OpenDocument URL to do it, but the report have a tool bar on the top, status bar on the bottom and a prompt area on left. So what i want to know is how to integrate the report itself on my portal (no tool bar, no status bar and no prompt area). Is there any way to control the display of these different area?
thnaks!

Normally there is not way to deactivate the statusbar and the toolbar. What you can do is to try to capture the HTML stream using javascript and filter out the toolbar components. This can be quite complicated though since the html structure of the report is quite complicated (multiple iFrame layers). And there is no garantee that this structure will remain inchanged in the next fix pack or service pack.
A rather simpe solution could be to "cover" the toolbar with an additional opaque frame.
Regards
Stratos

Publish web layout of jsp report as portlet

Hi All:
Please let me know how can i run web layout of jsp report and publish it as portlet?
I have successfully deployed my jsp report(web layout),namely my_rpt.jsp, as a J2EE application and when i write URL direlctly in address bar of browser it runs successfully.
I have also published (as portlet) successfully my_rpt.jsp, with "execute" type "servlet", and it runs paper layout of report.
But i m unable to run the web layout of this report,with "execute" type "JSP"
i have provided "Oracle Reports Web Gateway URL for JSP reports " = http://webserver.domain_name:port/
Please help me out whats the problem and how can i run my jsp report with web layout?.One thing more its not the problem with only my_rpt.jsp
but other reports also shows the same behaviour.
Any suggestion/solution would be highly appreciated.
Regards
Sam

Hi sam ,
Can you please tell me full process of to publish the report made in report builder in a portal (portlets). i am new to portal .
can u please provide me guidance
thanx
anand

Reports 9i Portlet

Similar Messages

Maybe you are looking for