Reports and applications WEB ABAP in MSS for BP 1.41

Good Night.
I am implementing MSS with BP 1.41, ECC 604 and Portal 701. I need publish a report created in ABAP and two applications WEB Dynpro ABAP in the area of Overview of the Manager.
Ie. I want that in the area of navegation appear the Application Customer.
And the Workset Service Map appear the two applications and the report Z created.
What i should do?
Regards

In latest version of WD ABAP based appraisals, you can change the layout through configuration in spro under -->> Personnel Management -->> Personnel Development -->> Objective settings and appraisals -->> Define tab and process configuration for templates.
However, you need to activate the switches HCM_OSA_CI_1 in order to do the above configuration using the node otherwise the node will not be visible.
Please read the documentation as much as possible in service marketplace and help.sap.com. There is lot of custumization which can be achieved using WD ABAP.
Regards,
Anil Kumar

Similar Messages

Reports and applications WEB ABAP in MSS

Good Night.
I am implementing MSS with BP 1.41, ECC 604 and Portal 701. I need publish a report created in ABAP and two applications WEB Dynpro ABAP in the area of Overview of the Manager.
Ie. I want that in the area of navegation appear the Application Customer.
And the Workset Service Map appear the two applications and the report Z created.
What i should do?
Regards

Hi,
for SE38: Not possible. GUI applications and WebClient do not share any UI logic. Only way would be the "wrapper" of ITS you do not want.
For the query I do not know.
cheers Carsten

UCCX 8.5 - Historical Reports - Traffic Analysis report and Application Performance Analysis report different calls presented

Hi,
Please Advice.
When I compare Traffic Analysis report and Application report, Calls presented are not same. Please Help !
Also attached herwith the reports

Mohammed,
It is common, in many of the Cisco Express 8.5 environments we have looked at, for the Total Incoming Calls given on a Traffic Analysis report to be a higher number than an Application Report.
The Traffic Analysis Report counts every unique sessionID (unique call) that is inbound (contact type of 1). The Application Reports do a similar thing but qualify (filter) only the records that have an application assigned.
There are simply times where inbound calls have been directed to an "agent" without having an applicaiton assigned.
The best thing the reporting user can do is to run a query on his or her database such as:
select * from ContactCallDetail where contactType=1and startDateTime > '2012-11-16 10:00:00' and startDateTime < '2012-11-16 11:00:00';
Usually when an application is not assigned to the record in the ContactCallDetail table it is because the destination type is equal to 1, which is an 'Agent' instead of a 'route point'.
So if you modify your select statement to filter by destinationType, you can quickly find the records that don't have the application assigned.
Example: select * from ContactCallDetail where contactType = 1 and destinationType = 1 and startDateTime > '2012-11-16 10:00:00 and startDateTime < 2012-11-16 11:00:00';
When you look at these records, you will see the agent that took the call from the destinationID field. The number in that field should match up with the field called 'resourceID' in a table called 'resouce';
Example: select * from resource where resouce=6011; where 6011 was the number you found in the destinationID field.
If there is still confusion about the source of the call - then talk to that agent and find out what is was.
Good Luck and let me know if you need further help.
Ron Reif
[email protected]

SAP NetWeaver Application Server ABAP Trial Version for Linux

Donde podría conseguir los paquetes de instalación del SAP NetWeaver Application Server ABAP Trial Versión para correrla en una Maquina Virtual con Linux.

https://store.sap.com/sap/cpa/download/20/0000000218?tkt=6728195BC9A41D6FDC99371FC9BB49E9_20140521182535.4356890&sap-lan…

Use VLC for YouTube and other Flash Player videos. Flash has become very slow and VLC Web Player works perfectly for other video websites.

I'd like to use VLC Web Player for viewing YouTube videos rather than use Adobe Flash. Adobe Flash is very slow on my other computers and when websites use my VLC Web Player, I have no issues whatsoever. I'm curious if this can be done with Firefox, as I researched it only to find an add-on for Google Chrome only.

You may be able to disable Flash entirely and just use HTML 5 video codecs to view the videos this is faster but you may lose access to some videos such as ones that have mandatory advertisements.

Unable to create a webi report and 3 times it prompting for logon credentai

Hi,
We have a issue,
1.We are unable to create a webi report and 3 times it is prompting for logon credentials.
3.After giving the logon credentials 3 times then it is working fine.
4.We are using IIS Jakarta redirector .
5.We are able to view the webi documents successfully ,the issue occurs only when we create a new webi report.
Any one please help me on this issue.
Thank you in advance.
Environment u2013
BOXI3.1,
SSO,
IIS Jakarta redirector.
Thanks & Regards,
Powell.

bypass IIS and jakarta (go to tomcat directly with an enterprise account like administrator), does the issue still exist?
Regards,
Tim

Best Web Filter and Application control for K-12 School using Chromebooks

Sophos UTM has good education pricing and provides all this and a lot more
Wil replace the firewall and has excellent web filtering and application control
Also nice features for education like allowing google apps but limiting to your google domain

We are currently using Barracuda Web Filter (410) with a Watchguard firewall. This school year we are launching Google for Education with 160 Chromebooks to start the program.
We need to upgrade our webfilter and are considering another Barracuda as well as Litespeed, Websense and perhaps OpenDNS.
is there anyone who is in a similar situation that has some recommendation?
Here are a few more details:
School is 900+ students
300 wired workstations
Active directory environment
Ruckus Wireless with 30+ access points
This topic first appeared in the Spiceworks Community

Transport Webi Reports and Web services as the backend of dashboards from BO Production to BO Development system

Hello Experts,
I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
And If yes, will it have any other impact on webi reports, web services or dashboards?
Thanks & Regards,
Alfred Thomas

Hi Gill,
As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
Can you please help?
Regards,
Alfred thomas

BI setup: WebAS ABAP Setting - Java to ABAP communication problem

Hello,
i've got a problem during intallation of BI in Netweaver 2004s. The Diagnostics & Support Desktop Tool reports errors in WebAS ABAP Settings. These errors are:
- "Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018)" with the suggested solution "Check Connector Connection of System Object in Portal System Landscape". What does it mean?
- "Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination <destination>" and "Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination <destination>" with suggested solution "Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway." Run of transaction SM59 returns no errors.
Further i've take a look in the log 'dev_jrfc.trc' and there i found the errors:
- Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSRD_MAP_TO_PORTAL_USERS not found on host <host>
- Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host <host>
- Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXY not found on host <host>
Can these errors be the cause of the WebAS ABAP Setting error displayed in the Diagnostics & Support Desktop Tool? How they can be solved?
Thanks for your help,
Martin

Hello Chetan,
thanks for your response. Maybe i've described my problem not clear enough. There is no problem of installation and usage of support & dektop tool, but of installation of BI. The support & dektop tool indicates the errors described above with no other hints. My questions is, if anybody knows, what is the cause of the errors and what i must do, to install BI correctly.
Cheers,
Martin

Using facelets and Visual web jsf frameworks together

I am developing a new jsf application and I wanted to make the page navigation simpler like making the content pages independently using woodstock components and including them in the main template page.
I have downloaded Facelets support plugin for netbeans and installed it. I have created a new project using the wizard and i specified the two (facelets and visual web jsf) as frameworks for use. But I failed to leverage my application with facelets because I don't know how to use woodstock components with facelets.
I am new to jsf and i want the woodstock visual components. Can't I use facelets then?
Plz help.

I managed to find a workaround. Thought i should share it with those who are faced with a similar issue.
I found that a bug report had been placed in the past with Apache Dev. However, they had said that they would not modify their logic because the servlet container spec requires it (even though isapi_redirector is only a connector and not a container). They said that there is no way for the isapi_redirector to differentiate between /foo/WEB-INF when foo is a context and when foo is just a sub-directory of the ROOT web application. So, the general consensus was to err on the side of safety and risk blocking a few requests that are valid.
However, this causes a serious issue for those using NetBeans JSF Visual Web Projects. Hence, I created my own flavour of isapi_redirector by modifying the code such that this check is not performed and leaving the onus of checking on Tomcat.
For those who are interested, the simplest way to go about this would be to force the function uri_is_web_inf (in jk_isapi_plugin.c ) to always return FALSE.

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

How to run others applications with abap commands

Is there a mothed that can use it to run an application with abap statement?
for example: how to open a text file in program with abap command?
thank you very much.

CALL FUNCTION 'WS_EXECUTE'
EXPORTING
DOCUMENT = ' '
CD = ' '
 COMMANDLINE = ''
INFORM = ' '
 PROGRAM = 'NOTEPAD'
STAT = ' '
WINID = ' '
OSMAC_SCRIPT = ' '
OSMAC_CREATOR = ' '
WIN16_EXT = ' '
EXEC_RC = ' '
IMPORTING
RBUFF =
EXCEPTIONS
FRONTEND_ERROR = 1
NO_BATCH = 2
PROG_NOT_FOUND = 3
ILLEGAL_OPTION = 4
GUI_REFUSE_EXECUTE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here...
In the CommandLine you can give the path where the file is located like for Example
C:\Test\Hello.txt.
In the Program you need to give the application that you want to open that file.
if helpful reward points...
Regards,
Vivekananda Varma Dandu

Portal Activity Reporting and SAP Business Warehouse

Hi,
Does anyone out there know if SAP has or plans in the near future to deliver Portal Activity Reporting content via SAP Business Warehouse?
I would have thought BW would have been the ideal solution to enable some "out of the box" Portal Content in terms of extracting the data from the tables used for the Portal Activity reports, and then extracting them to BW for slicing/dicing & Presentation.
The current standard Portal Activity reporting does not supply what we need. We don't want to spend time and money developing this ourselves if SAP has plans to deliver it in the near future.
Any news please?
Cheers, Phil G.

Hi,
Check this blog which tells about the future of Activity Reporting..
The Final Word (Hopefully) on the Portal Activity Report
John

Hyp Reports and Analyzer 7.2

Hi
We are using Hyp Reports and Analyzer 7.x , I dont have any info regarding relational repositories.
Can any one tell me how to get the repository information from hyperion reports and analyzer admin window
Thank You for your help

Thank You I got it

Script to know number of users over database and applications.

hi brothers.
kindly i need helpl to know script or command of number of online users over database and application.(i need it for performance issue).
Message was edited by:
user633617

set pages 100
set lines 3000
col machine format a25
col username format a15
col program format a25
break on 1;
set heading off;
select
'Sessions on database '|| d.name ||' having instance name '|| i.instance_name
from v$database d,v$instance i;
set heading on;
compute sum label 'Total Sessions' of sessions on 1
select
1,username,machine,program,count(*) sessions
from v$session
group by username,machine,program
order by username,sessions desc;

Reports and applications WEB ABAP in MSS for BP 1.41

Similar Messages

Maybe you are looking for