Reports and Console Show Different Information for Compliance
Hello,
Could someone enlighten me as to why for a specific Software Update deployment group I should see different compliance figures when I look at the deployment status in the console and when I run a Software Updates - A Compliance report?
For example for a recent batch of updates sent out I get the following figures from the Monitoring > Deployments part of the console; Total Assets 4,239, Compliant 2821, In Progress 37, Error 14, Unknown 1367.
If a run a report for the same batch of updates I get; Total Assets 4,238, Compliant 3343, Non-compliant 725, Unknown 170.
I suspect the difference might be due to a change having taken place for the set of updates e.g. Microsoft changed one of the updates to expired etc. and this has caused the clients to have to check their compliance status again.
What changes to an update that is part of a deployed update group would cause clients to have to check their compliance again and why would the report be different to the console?
Thank you for any help / advice.
Stephen
Hello,
I would be interested to know how the two different ways of looking at what should be roughly the same data can show quite different stats. At the moment for one deployment of software updates the Deployment Status pie-chart tells me that 3,006 clients are
compliant but the report tells me that 3,360 are compliant.
What seems to have happened is that an update that is part of the deployment changed its status so that the clients are having to check their compliance status again. This is slowly happening and I can see on the Deployment Status pie-chart the number of
compliant clients is slowly going up but on the report the compliant number seems to have remained high almost as if the need for the clients to re-check their compliance has not been taken into account.
Thanks.
Stephen
Similar Messages
-
Software inventory report and PC show different information
Hi,
The scenario is the following:
SCCM 2012 R2.
Clients with windows 8.
The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
Programs and features screenshot(ordered by name):
Report screenshot (ordered by name):
The question is:
Is the above normal behavior?
if not
How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
Thanks in advance!Take a look at that device in Resource Explorer. Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class. This data comes from the registry, and on a 64-bit operating system there
are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications. This is much easier to report
off of.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful". -
Hi. I just added $25 gift card into the redeem in the app store and purchased four different apps for $4.99 each. I was planning on purchasing one more app at $4.99, but showed that I do not have the $5.00 in my redeem. Instead I have only $4.80?!?!?!?
Is there taxes that's going on here?
I feel jipped!There will indeed be taxes, assuming you are in an area where sales tax is normally charged.
-
[Devices Page] Show more information for the offline devices
Spotify should show more information for the offline devices that are under a user's account. The main reason I ask is because I have noticed on numerous occasuions that multiple devices in the list show the exact same name.
An example in the screenshot below:
It would be great if each device had more information e.g MAC address, last IP access, computer name and so forth.Updated: 2015-07-28
Marked as new idea and edited the title slightly to make it easier to find via search. ;)
You might also want to add your kudos to a similar idea about the ability to name offline devices here. -
[ENVIRONMENT]
Product version - BI4.1 SP03
OS - Windows 2008 R2
CMS Database - Oracle 11g
Java Application Server - Tomcat7
[ISSUE]
Using the Upgrade Management Tool to completely migrate a BOXI3.1 SP3+FP3.6 to BI4.1 SP03. The reporting database from both BOXI3.1 and BI4.1 are the same and so is the database logon credential.
When viewing and refresh a migrated Crystal Report, it throws "The viewer could not process an event. The database logon information for this report is either incomplete or incorrect. [] ---- Error code:0 [CRWEB00000119]" error in both BI Launchpad and "The database logon information for this report is either incomplete or incorrect" in scheduled job.
[STEPS TAKEN]
- Update the Database Configuration with the SAME Oracle database password in CMC and "The database logon information for this report is either incomplete or incorrect" issue goes away.
I search the SAP SMP and SCN forum and found no reference on this UMT and Crystal Report database logon problem. Hope any of you have seen this problem and share if there is an ADAPT for it.
Thank you in advance,
Jin-ChongHi,
The BI4.1 SP03 server and client and Crystal Report 2013 SP03 developer and Crystal Report for Enterprise 4.1 SP03 are all installed onto this Windows 2008 R2 server.
I am able to open the migrated report from CMS repository in Crystal Report 2013 SP03 developer and am able to refresh it with database logon password provided. After save it back to the Enterprise, the database logon password field for this report in CMC becomes empty so that I have to enter the database password and choose "Use same database logon as when report is run" when viewing and scheduling report.
What is interesting to me is that the UMT seems to migrate the report along the database logon password because I can see the encrypted password in the report database logon property in CMC. The workaround is to reenter the database logon password in the report database logon property in CMC.
With this said, there are hundreds of the Crystal reports and the workaround would consume lots of manual work by update each report's database logon password in CMC.
For other customers who have more crystal reports, I wonder if there is an automated way to update the crystal report's database logon password on BI4.1 or if this is an isolated incident on my new BI4.1 SP03 environment.
I run UMT in command line to perform livetolive migration, and my steps are listed below
cd "E:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\apps\upgradeManagementTool\jars\"
"E:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\bin\javaw.exe" -Xmx56g -Djava.library.path="..\..\..\..\win64_x64" -jar upgrademanagementtool.jar -internal_use_only_noversioncheck -responsefile LIVETOLIVEResponseFile.txt
LIVETOLIVEResponseFile.txt:
mode=livetolive
source=edhc01nwapp65:6400
sourceusername=Administrator
sourcepassword=xxxxxxxxxx
destination=WAPP246N:6400
destinationusername=Administrator
destinationpassword=xxxxxxxxxx
logfile=E:\temp\livetolive.csv
configparam:base_url=https://boprod.bsc.bscal.com/dswsbobje
locale=en_US
Regards,
Jin-Chong -
I bought the entire season 6 of Breaking Bad and it shows I paid for all, but I have not been able to see more than the first episode. Where are the others?
Hi Mizmichele,
Welcome to the Support Communities!
The following information should help you understand how Season passes work:
Click on the links below for more details and screenshots:
iTunes Store: Download options when purchasing TV seasons, Season Passes, Multi-Passes, movie bundles, music box sets, or individual movies or TV episodes
http://support.apple.com/kb/HT5731
iTunes 11 or later
Season Passes and completed TV seasons
When you purchase a TV season or Season Pass, you'll be presented with three options:
Clicking the Later button will not download any episodes. You'll be able to download your episodes at any time from iTunes in the Cloud.
Clicking the Download All button will download all available episodes.
Clicking the Download button will download the earliest unseen episode of the season.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
TV Shows
Make sure you're signed in with the same Apple ID you used for the original purchase.
Tap the Videos app.
Tap TV Shows, at the bottom of the page.
Find and tap the show and season you want to download.
Tap the download icon next to the episode you want to download.
The TV show will begin downloading.
Cheers,
Judy -
Keychain showing different character for the password
Hi just wanted to ask why my keychain is showing different character for my password in my AIM and Yahoo account? When i mark the show password its show plenty of letters but not the one i am really using. How can i show the right one?
Hi Irvin,
If you see a crazy corrupt password, I'd delete that item, ythen login yo AIM or Yahoo again to create a new one, unless you don't remember your PW, then try Keychain First Aid under the Window Menu item, then either check the Password under that item, change it, or delete it and start over.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
In Cover Flow, a compilation album shows different covers for each song. How do I make it show one cover for the whole album?
Also in the first page of Get Info for all tracks set the Album Artist to be Various Artists.
If you select all the tracks and right click to get info then you can do all the tracks in one go -
i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?
Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525) -
How do I place an image and insert a different photo for the "mouse down" state?
I have placed an image within an accordian widget and when I select the "mouse down" area in the states dialog box, i click "fill" in the toolbar and insert the photo i want to display when the image is clicked but this image is "covered up" by the originally placed image and is not seen in my states dialog box.
I have done this before when i made rectangles and placed images in rectangles. But i soon realized that you cannot add alternative text to images in rectangles for some frustrating reason.
How do I place and image and have a different image for the mouse down state?Hello,
This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin -
i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help
Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
Otherwise surf google you mite have to edit you host file in windows , system32
Let me know if it works -
How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.
It does so by default... what's the issue?
-
i published my app and it shows us (waiting for review) and how much time it will take to (Ready for sale) ?
5-10 days or longer.
-
User_lobs and user_segments view shows different tablespace for lob segment
Hi,
I am trying to move lob in different tablespace for partitioned table.
I used
alter table <table_name> move partition <partition_name> lob(lob_column) store as (tablespace <tablespace_name>);
alter index <index_name> rebuild partition <partition_name> tablespace <tablespace_name>
ALTER TABLE <table_name> MODIFY DEFAULT ATTRIBUTES TABLESPACE <tablespace_name>
ALTER INDEX <index_name> modify default ATTRIBUTES TABLESPACE <tablespace_name>
Database - 10.2.0.5
OS- HP Itanium 11.31
I can see in user_lob_partitions, user_segments and user_part_tables shows me new tablespace information
whereas user_lobs and user_part_indexes shows me different information regarding tablespace.
I checked some documents in metalink but didnt help me.
I think that I am missing something or doing some step wrong.
Please help.
SQL> select partition_name, lob_partition_name, tablespace_name from user_lob_partitions where table_name in ('TRB1_PUB_LOG','TRB1_SUB_ERRS','TRB1_PUB_LOG') ;
PARTITION_NAME LOB_PARTITION_NAME TABLESPACE_NAME
S2000 SYS_LOB_P8585 USAGE_REORG_TBS
S2001 SYS_LOB_P8587 USAGE_REORG_TBS
S2003 SYS_LOB_P8589 USAGE_REORG_TBS
S2004 SYS_LOB_P8591 USAGE_REORG_TBS
S2005 SYS_LOB_P8593 USAGE_REORG_TBS
S2006 SYS_LOB_P8595 USAGE_REORG_TBS
S2007 SYS_LOB_P8597 USAGE_REORG_TBS
S2008 SYS_LOB_P8599 USAGE_REORG_TBS
S2010 SYS_LOB_P8601 USAGE_REORG_TBS
S2011 SYS_LOB_P8603 USAGE_REORG_TBS
S2012 SYS_LOB_P8605 USAGE_REORG_TBS
S2013 SYS_LOB_P8607 USAGE_REORG_TBS
S2014 SYS_LOB_P8609 USAGE_REORG_TBS
S2015 SYS_LOB_P8611 USAGE_REORG_TBS
S2888 SYS_LOB_P8613 USAGE_REORG_TBS
S2999 SYS_LOB_P8615 USAGE_REORG_TBS
S3000 SYS_LOB_P8617 USAGE_REORG_TBS
S3001 SYS_LOB_P8619 USAGE_REORG_TBS
S3004 SYS_LOB_P8621 USAGE_REORG_TBS
S3005 SYS_LOB_P8623 USAGE_REORG_TBS
S3006 SYS_LOB_P8625 USAGE_REORG_TBS
S3007 SYS_LOB_P8627 USAGE_REORG_TBS
S3008 SYS_LOB_P8629 USAGE_REORG_TBS
S3009 SYS_LOB_P8631 USAGE_REORG_TBS
S3010 SYS_LOB_P8633 USAGE_REORG_TBS
S3011 SYS_LOB_P8635 USAGE_REORG_TBS
S3012 SYS_LOB_P8637 USAGE_REORG_TBS
S3013 SYS_LOB_P8639 USAGE_REORG_TBS
S3014 SYS_LOB_P8641 USAGE_REORG_TBS
S3015 SYS_LOB_P8643 USAGE_REORG_TBS
S3050 SYS_LOB_P8645 USAGE_REORG_TBS
SMAXVALUE SYS_LOB_P8647 USAGE_REORG_TBS
32 rows selected.
SQL> select TABLE_NAME,COLUMN_NAME,SEGMENT_NAME,TABLESPACE_NAME,INDEX_NAME,PARTITIONED from user_lobs where TABLE_NAME in ('TRB1_PUB_LOG','TRB1_SUB_ERRS','TRB1_SUB_LOG') ;
TABLE_NAME COLUMN_NAME SEGMENT_NAME TABLESPACE_NAME INDEX_NAME PAR
TRB1_SUB_ERRS GENERAL_DATA_C SYS_LOB0006703055C00017$$ TRBDBUS1LNN1 SYS_IL0006703055C00017$$ YES
TRB1_SUB_LOG GENERAL_DATA_C SYS_LOB0006703157C00017$$ TRBDBUS1LNN1 SYS_IL0006703157C00017$$ YES
TRB1_PUB_LOG GENERAL_DATA_C SYS_LOB0006702987C00014$$ TRBDBUS1LNN1 SYS_IL0006702987C00014$$ YES
SQL> SQL> select unique segment_name ,tablespace_name from user_Segments where segment_name in (select SEGMENT_NAME from user_lobs where TABLE_NAME in('TRB1_PUB_LOG','TRB1_SUB_ERRS','TRB1_SUB_LOG') );
SEGMENT_NAME TABLESPACE_NAME
SYS_LOB0006702987C00014$$ USAGE_REORG_TBS
SYS_LOB0006703055C00017$$ USAGE_REORG_TBS
SYS_LOB0006703157C00017$$ USAGE_REORG_TBS
SQL> select unique segment_name ,tablespace_name from user_Segments where segment_name in (select INDEX_NAME from user_lobs where TABLE_NAME in('TRB1_PUB_LOG','TRB1_SUB_ERRS','TRB1_SUB_LOG') );
SEGMENT_NAME TABLESPACE_NAME
SYS_IL0006702987C00014$$ USAGE_REORG_TBS
SYS_IL0006703055C00017$$ USAGE_REORG_TBS
SYS_IL0006703157C00017$$ USAGE_REORG_TBS
SQL> select unique index_name,def_tablespace_name from user_part_indexes where table_name in ('TRB1_PUB_LOG','TRB1_SUB_ERRS','TRB1_SUB_LOG');
INDEX_NAME DEF_TABLESPACE_NAME
SYS_IL0006702987C00014$$ TRBDBUS1LNN1
SYS_IL0006703055C00017$$ TRBDBUS1LNN1
SYS_IL0006703157C00017$$ TRBDBUS1LNN1
TRB1_PUB_LOG_PK USAGE_REORG_IX_TBS
TRB1_SUB_ERRS_1IX USAGE_REORG_IX_TBS
TRB1_SUB_ERRS_1UQ USAGE_REORG_IX_TBS
TRB1_SUB_ERRS_2IX USAGE_REORG_IX_TBS
TRB1_SUB_LOG_1IX USAGE_REORG_IX_TBS
TRB1_SUB_LOG_PK USAGE_REORG_IX_TBS
SQL> select unique def_tablespace_name from user_part_tables where table_name in ('TRB1_PUB_LOG','TRB1_SUB_ERRS','TRB1_SUB_LOG');
DEF_TABLESPACE_NAME
USAGE_REORG_TBS
Please let me know if some more details required.>whereas user_lobs and user_part_indexes shows me different information regarding tablespace.
do you see different results after starting a new session after the ALTER statements were issued? -
LR2 and PS Eelements8 show different RGB for the same color - Please, HELP
LR2, Elements 8, Color Chart 24 (CC24),
Please help. I may need to reset LR2 to factory default or to something else.
For the following RAW adjustments the tone curve set to Linear, Contrast and Brightness to 0
I have photographed a CC24 in RAW. Opened image in Elements 8 and adjusted Exposure to 243 for the White patch #19
Then with with WB tool clicked on the 50% Gray and then readjusted exposure for the CC24 listed 243 for #19.
Now all Gray patches #19 through #24 as listed in the table or very close R=G=B (243, 200, 160, 122, 85, 52)
The RGB numbers for Red Patch #15 are R=169, G=58, B=63
The CC24 listed RGB for Red patch #15 are R=175, G=54, B=60
Also saved the adjusted image as JPG
Then opened the image in LR2 and adjusted exposure and WB as described above for Elements 8.
The Gray patches #19 through #24 show RGB numbers as listed in the table or very close.
The RGB numbers for the Red patch #15 are R=138, G=84, B=64.
However the CC24 RGB for Red patch #15 are R=175, G=54, B=60
Exported the image as JPG
Then opened the two saved JPG images in Elements. these two images read almost identical RGB numbers for each patch.
How can I fix LR2 RGB reading. Recently I have saved as defaults the tone curve set to Linear, Contrast and Brightness to 0 and probably did it wrong. My be I need to reset LR2 to the factory defaults to restore its correct reading or something else.
Please help.
LeonidQ1. Is that means that when LR2 Exported RAW to JPG the correct numbers resulted from conversion?
You should be careful with the term RGB numbers. Such numbers are only useful when you know the working space. For example, sRGB, adobeRGB, prophotoRGB, melissaRGB, etc. The numbers I calculated are simply the reference numbers (find them here: http://www.brucelindbloom.com/index.html?ColorCheckerRGB.html ). I recalculated the values in the display space used in Lightroom from Bruce Lindbloom's values in normal prophotoRGB which is a simple arithmetic excercise. When Lightroom exports a jpeg, you can set the color space in the export panel and it will do the conversion for you meaning that it will translate between its internal colorspace and the desired export color space. In an external program, you will usually be working in sRGB, adobeRGB, or prophotoRGB, which are the three main spaces that Lightroom exports to. As you can see from Bruce's tables in the link above the RGB values for these patches in all these spaces are different.
For example RGB for MacBeth CC24 Red patch (#15) was shown as 203, 0, 0 and x-rite RGB is 174, 54, 60.
They are actually the exact same chart. As I say above the values are meaningless if you don't know the colorspace. The first RGB triplet you quote makes no sense at all. It does not correspond to any colorspace listed for the MacBeth chart. The zeros indicate that the color is far outside of the gamut of the used color space, so the value is basically useless. The second is sort of close to the sRGB value.
Q.2 Would it mean that your shown table should not be applied to (used with) x-rite CC24 but to MacBeth only?
They should be pretty good for both as the chart is supposed to be the same.
Q3. Have you created your posted LR table or it was provided by Adobe?
I created it myself. Since you have a colorchecker, you should look into creating a camera profile using it. This can be done with X-rite's excellent passport utility (free download from their website), or with Adobe's free DNG profile Editor. Simply shoot a chart in the right light conditions and run the raw/dng file through this utility and a profile is created that will allow you to get very good color rendering from your camera if you shoot raw.
Maybe you are looking for
-
CLIENT_TEXT_IO not fully exported
Hi everyone, I am using CLIENT_TEXT_IO to export data into a excel file, but the data is not fully written and terminated and also gives this error: "File Creation was interrupted. Error 302000: non-Oracle exception". any idea.... Thanks ®ards Sek
-
Why can't I access the Store from my iTunes
Why can't I access the Store from my iTunes on my PC?
-
Customer receivables aging report
Hi, How do i interpret this report(image attached)? Why do credit values appear? Aging date: 11th june 2014 Thanks, Regards. Aziz
-
Safari 5.1 update crashes as soon as i open Safari... help...
I just updatd to Safari 5.1, i'm using MAC OS X Snow Leopard 10.6.8, Safari worked extremely fine before the update that i wish i could downgrade back and never update, but anyway here's the error reports...... Please Hlep: Process: Safari [5
-
How to use html template on a php script, if possible..
Hello, I buy it smartjobboard script which is made in php ( ''SmartJobBoard software design and layout is based on 'Templates' system. Templates used in the software are built on html and Smarty. '') . This is advanced job board script with user regi