Reports and Dashboards Concept to Use tools Jasper, Birt and Pentaho to Implement in SAP

Dear Experts,
We would like to Implement/Introduce Reports and Dashboards concept in our SAP Environment Using Tools Jasper, Birt or Pentaho. The End Users in our company has a requirement of Verifiying the Reports which are downloading from SAP Into Graphical Reporting / Reports for Easy Analysis. Please provide me the required Information of connnectivity of Data from SAP, connecting with Data outside sap for Ease or Report Creation, Dashboard concept.
Thanks In advance,
Regards,
Harsha.

Apologies - I've just discovered that there is an e-commerce forum.
I'll try over there.

Similar Messages

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

How do I make one (and only one) device use my Apple ID and iCloud account?

How do I make one (and only one) device use my Apple ID and iCloud account? I currently have an iPad mini, iPhone 5, and MacBook pro attached to my apple accounts, but I want only my iPhone 5 to be assosiated with either one. Whenever I use any of the three devices, I get a notification on the other two telling me that these devices are now using these accounts from these services, etc. and I want these notifications to stop, along with the devices using to them. How do I do this? I completely reset the iPad mini so I don't know how I'm still getting notifications from it, and I deleted and signed of of all of my accounts everywhere I could find on my Mac. So, to restate exactly what I want to do, I want ONLY my iPhone 5 to use ANY of my Apple/iCloud accounts and ONLY it can receive emails, iMessages, and FaceTime calls. Thanks!

If you want to disconect your Mac from iCloud, go to System Preferences>iCloud and click Sign Out. If you only want to stop using iCloud email, just uncheck Mail. To stop iMessage, open the Messages app, go to Messages>Preferences, click the Accounts tab, click your iCoud ID on the left-hand side, then to the right click Sign Out. To stop FaceTime, open the FaceTime app, then click "Apple ID" then click Sign Out.
On your iPad, go to Settings>iCloud and tap Delete Account (or if you only want to stop using iCloud email, turn Mail off). For FaceTime, go to Settings>FaceTime, tap the ID and sign out. For iMessage, go to Settings>Messages>Send & Receive, tap the ID and sign out.

How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

I cannot get my bookmarks and reading lists to sync over my devices. I've checked the iCloud settings on both devices and still nothing. Using a retina iPad and a new mac book pro

I cannot get my bookmarks and reading lists to sync over my devices. I've checked the iCloud settings on both devices and still nothing. Using a retina iPad and a new mac book pro

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

Im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this

im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this?

Go to the game's option settings and change the settings to something more to your liking.

Broadcasting and Dashboard concepts in BI

Hello Experts,
Can any one please explain in detail what exactly the broadcasting and dashboard terms mean w.r.t BI. Which is the authorization object that give access to broadcasting and using dashboard for an user.
Since I am new to BI , I am not much aware of these terms and I would like to know what is the difference among these terms.Thanks in advance.....
Rashmi

Dear Rashmi,
For details on Broadcasting-
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm
For details on Dashboards -
http://help.sap.com/saphelp_nw04/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
Hope these helps you!
-Pradnya

I have screwed up all my side bar settings and I can not use tools because I meesed up the path way. I havent had the app long Can i just rest it all?

can i reset the program or do i just uninstall it ?

Not exactly sure what you mean, but you can try going to Window>Workspace and either clicking on Essentials (Default) or Reset Workspace,
Also, if you have photoshop cc 2014, you can right click on the big tool icon on the far left of the tool options
bar, click on Reset All Tools and that will reset the tools to the default values and also show the default tools.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I accidently loaded my daughter's itunes and apps into my iphone 4. How can I delete all of her information and be able to use my itunes login and password again so that I can access my apps?

I recently purchased an Iphone 4 and was not aware that I had to have separate ITunes account. My daughter and I share a computer and apparently she is using the main account on the computer. I went to download some songs from her ITunes and it not only downloaded all of her songs on my phone but also her apps. I do not want her apps. When I went to use the apps that I had on my phone before downloading her ITunes information, they would not open and only go back to the main screen. When I access her apps, they work. Help!!! How can I restore my settings and just take all of the information that I downloaded from her ITunes out and set my own ITunes on the same computer. Any help would really be appreciated.

Create your own user account on your computer, open iTunes, log into your iTunes account on the iTunes Store then sync your iPhone.
http://support.apple.com/kb/HT1495

Im trying to listen to a book and it keeps telling me I need to enter my audible account username and password. I used my apple id and it is not working anyone know what to do?

Im trying to listen to a book we downloaded from amazon. When we click on it it says we need to enter out audible username and password. I used my apple id username and password and it says it is not correct. I reset this and used it again and it still does not work. Any ideas?

Launch iTunes. From the menu bar click Store / View My Account then click Edit Payment Information.
Make sure the Security Code for you credit card is available and the expiration date is correct, then click Done.

IMovie 11 and Canon XF Codec used in Canon XF300 and 305

Does anyone know if iMovie11 will support the new video codec Canon is using their just-released professional camcorders, the XF200 and 305?
Canon's description states:
"Canon's adaptation of MPEG-2 for the XF305 Professional Camcorder, named the Canon XF Codec, ensures the widest compatibility with existing industry infrastructure and non-linear editing (NLE) systems. And by using an MXF file wrapper, video and audio can be wrapped in a single file along with important metadata. The codec's 50Mbps constant bit rate provides the bandwidth needed to capture the XF305's superior resolution and color in spectacular detail."
Thank you.

No, it will not work in iMovie.
This is a bit of a mismatch. A $7500 camera with a $20 editing app.
You can edit with this camera using Final Cut Pro and ProRes422 intermediate codec.
See these threads, for example...
[http://discussions.apple.com/thread.jspa?messageID=12247532&#12247532|http://di scussions.apple.com/thread.jspa?messageID=12247532&#12247532]
[http://discussions.apple.com/thread.jspa?messageID=12253057&#12253057|http://di scussions.apple.com/thread.jspa?messageID=12253057&#12253057]
[http://discussions.apple.com/thread.jspa?messageID=12130886&#12130886|http://di scussions.apple.com/thread.jspa?messageID=12130886&#12130886]
Having said that, if you have Final Cut Pro installed on, say, a Mac Pro with a fast eSata drive array, it might be worth trying in iMovie, just to see. But you would need FCP just to get the codec.
Message was edited by: AppleMan1958
Message was edited by: AppleMan1958

SQL Server 2008 R2 - Report Builder 3.0 - timeout using shared data source and stored procedure

I select the shared datasource from the data source propeties dialog, test the connection and everything is good.
I add a dataset by selecting "use a dataset embedded in my report" option within the Dataset properties dialog.
I select the newly added data source, click the "Stored procedure" query type and drop down the list box and select my intended stored procedure.
the timeout for the dataset is "0" seconds.
I click the "OK" button and I'm presented with the parameters to the stored procedure.
I enter valid data for the parameters and click the "OK" button.
I then get the following error message after 30 seconds:
The problem is, all of the timeouts, that I'm aware of, have values of zero (no timeout) or high enough values that 30 seconds isn't even close to the timeout.
I think the smallest timeout we have is 120 seconds.
I have searched this site and many others and the solutions all involve altering the stored procedure to get the fields into report builder and then revert the stored procedure back to its original form.
To me, this is NOT a solution.
I have too many stored procedures that need to be brought into Report Builder.
I need a real solution.
Thank you for you time, Tim Caldwell.
Timothy E Caldwell

I don't mean to be rude, but really, check to see if the stored procedure can return data rows???
Maybe I'm not being clear enough.
The stored procedure runs perfectly fine.
it runs perfectly fine in the production environment and the test environment.
I can access the stored procedure in several ways and have it return correct data.
I can even trick report builder into creating a dataset with parameters and run the stored procedure that way.
What I cannot do, is to get report builder to not timeout after 30 seconds on the initial creation of a dataset with a Query type of stored procedure.
I have seen this issues posted again and again and again on may different sites and the "solution" is to simplifiy the stored procedure by creating a stored procedure that has a create table and a select in the stored procedure and that's it. After
report builder creates the dataset the developer then has to replace the simplified stored procedure with the actual stored procedure and everything works fine after that.
HOWEVER, having to go through this process for 70 or more stored procedures is ridiculous.
It would appear that there is something within report builder itself that is causing this issue.
The SQL Script included is an example of a stored procedure that will not create fields create a dataset with fields and parameters in Report Builder 3.0:
USE [CRUM_IT]
GO
/****** Object: StoredProcedure [dbo].[COGNOS_Level5ScriptSP] Script Date: 11/17/2014 08:02:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[COGNOS_Level5ScriptSP]
@CompanyCode varchar(8) = null,
@GetSiblings varchar(1) = 'N'
as
Begin
-- get emergency contact info
select *
into #tmp_Contacts
from
(select
ConEEID,
con.connamelast as [Emer Contact Last Name],
con.connamefirst as [Emer Contact First Name],
con.connamemiddle as [Emer Contact Middle Initial/Name]--,
,ROW_NUMBER() over (Partition by ConEEID order by ConNameLast)as rn
,ISNULL(
case when con.conphonepreferred = 'H'
then '(' + substring(con.conphonehomenumber, 1, 3) + ')' + substring(con.conphonehomenumber, 4, 3) + '-' + substring(con.conphonehomenumber, 7, 4)
else '(' + substring(con.conphoneothernumber , 1, 3) + ')' + substring(con.conphoneothernumber , 4, 3) + '-' + substring(con.conphoneothernumber , 7, 4)
end,
) as [Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.Contacts con
where con.ConIsEmergencyContact='y'
and con.ConIsActive='y'
) A
where A.rn = 1
CREATE TABLE #tmp_CompanyCodes (CompanyCode varchar(8))
If @GetSiblings = 'Y'
Begin
INSERT INTO #tmp_CompanyCodes (CompanyCode)
EXEC [z_GetClientNumbers_For_ParentOrg_By_ClientNumber] @CompanyCode
End
INSERT INTO #tmp_CompanyCodes
values (@CompanyCode)
select *
into #tmp_Company
from [ultiprosqlprod1].[ultipro_crum].dbo.Company
where cmpcompanycode in (select CompanyCode from #tmp_CompanyCodes)
select distinct
cmpcompanycode as [Client ID],
CmpCompanyDBAName as [Client Name],
eec.eecEmplStatus AS [Employment Status],
eec.eecEmpNo AS [Employee Num],
rtrim(eep.eepNameLast) AS [Last Name],
rtrim(eep.eepNameFirst) AS [First Name],
isnull(rtrim(ltrim(eep.eepNameMiddle)), '') AS [Middle Initial/Name],
rtrim(eep.eepAddressLine1) AS [Address Line 1],
isnull(rtrim(eep.eepAddressLine2), '') AS [Address Line 2],
eep.eepAddressCity AS [City],
eep.eepAddressState AS [State],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 1, 5)
ELSE rtrim(eep.eepAddressZipCode)
END AS [Zip code],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 6, 4)
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) > 0
THEN substring(eep.eepAddressZipCode, charindex(eep.eepAddressZipCode, '-', 1) + 1, 4)
WHEN len(eep.eepAddressZipCode) <= 5
THEN ''
END AS [ZIP + 4],
substring(eep.eepSSN, 1, 3) + '-' + substring(eep.eepSSN, 4, 2) + '-' + substring(eep.eepSSN, 6, 4) AS [SSN],
isnull(convert(VARCHAR(10), eep.eepDateOfBirth, 101), '') AS [Date Of Birth],
eetFED.TAXCODE AS [FED Tax Code],
eetFED.FILINGSTATUS AS [Fed Filing Status],
eetFED.EXEMPTIONS AS [Fed Exemption Allowance],
eetFED.ADDITIONAL AS [Additional Fed Withholding],
eetSIT.TAXCODE AS [SIT Tax Code],
eetSIT.FILINGSTATUS AS [State Filing Status],
eetSIT.EXEMPTIONS AS [State Exemption Allowance],
eetSIT.ADDITIONAL AS [Additional State Withholding],
isnull('(' + substring(eep.eepPhoneHomeNumber, 1, 3) + ')' + substring(eep.eepPhoneHomeNumber, 4, 3) + '-' + substring(eep.eepPhoneHomeNumber, 7, 4), '') AS [Home Phone],
isnull((SELECT cod.codDesc
FROM [ultiprosqlprod1].[ultipro_crum].dbo.Codes cod WITH (NOLOCK)
WHERE cod.codCode = eep.eepEthnicID
AND cod.codDosTable = 'ETHNICCODE'), '') AS [Race-Origin], --eep.eepEthnicID AS [Race-Origin],
eep.eepGender AS [Gender],
isnull(convert(VARCHAR(10), eec.eecDateOfOriginalHire, 101), '') AS [Original Hire Date],
isnull(convert(VARCHAR(10), eec.eecDateOfSeniority, 101), '') AS [Seniority Date],
isnull(convert(VARCHAR(10), eec.eecDateOfTermination, 101), '') AS [Termination Date],
isnull(eecTermType,'') as [Termination Type],
isnull(TchDesc, '') as [Termination Reason],
rtrim(eec.eecJobCode) AS [WC Code],
isnull(eec.eecJobTitle, '') AS [Job Title],
pgr.pgrPayFrequency AS [Pay Frequency],
eec.eecFullTimeOrPartTime AS [Full/Part Time],
eec.eecSalaryOrHourly AS [Pay Type],
isnull(convert(MONEY, eec.eecHourlyPayRate), 0.00) AS [Hourly Rate],
isnull(eec.eecAnnSalary, 0.00) AS [Annual Salary],
[YTD Hours],
isnull(eep.eepNameFormer, '') AS [Maiden Name],
eec.eecLocation AS [Location ID],
rtrim(eec.eecOrgLvl1) AS [Department ID],
eec.eecorglvl2 AS [Cost Item],
eec.eecorglvl3 as [Client Project],
eec.eecPayGroup as [Pay Group],
isnull(eepAddressEMail,' ') as [Email Address],
isNull(BankName1,' ') as PrimaryBank,
isNull(BankRoute1,' ') as PrimaryRouteNum,
isNull(Account1,' ') as PrimaryAccount,
isNull(AcctType1,' ') as PrimaryAcctType,
isNull(DepositRule1,' ') as PrimaryDepositRule,
isNull(BankName2,' ') as SecondaryBank,
isNull(BankRoute2,' ') as SecondaryRouteNum,
isNull(Account2,' ') as SecondaryAccount,
isNull(AcctType2,' ') as SecondaryAcctType,
isNull(DepositRule2,' ') as SecondaryDepositRule,
isNull(
CASE
WHEN DepositRule2 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct2 AS decimal(10,2)))
WHEN DepositRule2 = 'P'
THEN convert(varchar, cast((EddAmtOrPct2*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as SecondaryDepositAmount,
isNull(BankName3,' ') as ThirdBank,
isNull(BankRoute3,' ') as ThirdRouteNum,
isNull(Account3,' ') as ThirdAccount,
isNull(AcctType3,' ') as ThirdAcctType,
isNull(DepositRule3,' ') as ThirdDepositRule,
isNull(
CASE
WHEN DepositRule3 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct3 AS decimal(10,2)))
WHEN DepositRule3 = 'P'
THEN convert(varchar, cast((EddAmtOrPct3*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as ThirdDepositAmount,
Supervisor,
eec.eecEEID AS [Employee EEID],
eec.EecJobCode As [Job Code],
isnull(eec.EecTimeclockID,' ') As [Time Clock ID],
con.[Emer Contact Last Name],
con.[Emer Contact First Name],
con.[Emer Contact Middle Initial/Name],
con.[Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.empPers eep WITH (NOLOCK)
inner join [ultiprosqlprod1].[ultipro_crum].dbo.empComp eec WITH (NOLOCK)
ON eep.eepEEID = eec.eecEEID
inner join #tmp_Company cmp WITH (NOLOCK)
ON eec.eecCOID = cmp.cmpCOID
inner join [ultiprosqlprod1].[ultipro_crum].dbo.PayGroup pgr WITH (NOLOCK)
ON eec.eecPayGroup = pgr.pgrPayGroup
left outer join [ultiprosqlprod1].[ultipro_crum].dbo.TrmReasn
on tchCode = eecTermReason
left join (select CAST(sum(isnull(eee.eeeYTDHrs,0.00))AS DECIMAL(18,2)) as [YTD Hours],
eeeEEID,
eeeCOID
from [ultiprosqlprod1].[ultipro_crum].dbo.EmpEarn eee with (NOLOCK)
group by eeeCOID,eeeEEID)eee
on eec.eecEEID = eee.eeeEEID
and eec.eecCOID = eee.eeeCOID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode = 'USFIT'
)eetFED
ON eec.eecCOID = eetFED.COID
and eec.eecEEID = eetFED.EEID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode like '%SIT'
AND eetIsWorkInTaxCode = 'Y'
)eetSIT
ON eec.eecCOID = eetSIT.COID
and eec.eecEEID = eetSIT.EEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName1,
eddEEBankRoute BankRoute1,
eddAcct Account1,
EddAcctType AcctType1,
EddDepositRule DepositRule1,
EddAmtOrPct EddAmtOrPct1
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '99')edd
ON eec.eecCOID = edd.eddCOID
and eec.eecEEID = edd.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName2,
eddEEBankRoute BankRoute2,
eddAcct Account2,
EddAcctType AcctType2,
EddDepositRule DepositRule2,
EddAmtOrPct EddAmtOrPct2
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '01')edd2
ON eec.eecCOID = edd2.eddCOID
and eec.eecEEID = edd2.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName3,
eddEEBankRoute BankRoute3,
eddAcct Account3,
EddAcctType AcctType3,
EddDepositRule DepositRule3,
EddAmtOrPct EddAmtOrPct3
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '02')edd3
ON eec.eecCOID = edd3.eddCOID
and eec.eecEEID = edd3.eddEEID
left outer join (SELECT eecCOID,
eecEEID,
rtrim(eepNameLast) + ', ' +
rtrim(eepNameFirst) + ' ' +
isnull(rtrim(ltrim(eepNameMiddle)), '') AS [Supervisor]
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpComp WITH (NOLOCK)
join [ultiprosqlprod1].[ultipro_crum].dbo.EmpPers with (NoLock)
on eeceeid = eepeeid)eec2
ON eec.eecSupervisorID = eec2.eecEEID
left outer join #tmp_Contacts con
on eep.eepEEID = con.ConEEID
order by [Client ID],
[Last Name],
[First Name]
drop table #tmp_Contacts
END
Timothy E Caldwell

Citrix engineer report PB app memory issue using XenApp 6.5 and PB 12.5.1

I opened an Incident with SAP as this could be a big issue for our PB 12.5.1 application recently migrated from PB 9.02 deployment. We are in the process of piloting our PB 12.5.1 application. We are using Pcode for a rather large application. Each end user makes a connection to Oracle 10g using the o10 DLL. The PB 9.02 version of the application, which the bulk of our users are still using, is running on an older version of the Citrix software. Our new pilot version is running under Citrix XenApp 6.5, Windows 7 and PB 12.5.1. I noticed another thread in this discussion group in which another PB user noticed a similar issue running a PB 12.5.1 Pcode application running under Windows 7. One of our Citrix Engineers just relayed the following observation to us.
"I have been watching the new NIS servers, and it would appear that the 12.5 version is using 2-3x more memory than the 9 version.
I would expect it to be the opposite. Where this is going to be challenging is, that it will take us from 13 servers to an estimated 40+.
If you are working with vendors, or other technical resources, maybe they have some recommendations.
I have taken our data to the VM team, and they are seeing similar on their side. So it doesnt look like its anything other than the
behavior of the application. A lot of page faults, and memory writes which is common for powerbuilder...almost uses no CPU, but memory.
I have seen 90-105 users on the old systems (prior version of Citrix server and PB 9.02 Pcode). With 25 users on the new (XenApp 6.5 - PB 12.5.1) server, we are at 90% memory use. I thought it was something not configured optimally on the hardware side, but after checking with VM team, it would appear that its just the behavior of the application. There is a significant difference in memory usage."

What kind of database were you connecting to with your PB 10 application running under Citrix?
Oracle. Most likely 10g at the time.
Did you get to compare it with a prior PB version?
Actually, it was likely 9 when we first deployed it. It's been 10 years since they did that deploy and 10 hadn't been released yet. They upgraded to 10 some time later when I did some work for them again.

Reports and Dashboards Concept to Use tools Jasper, Birt and Pentaho to Implement in SAP

Similar Messages

Maybe you are looking for