Reports are not drilled down.

Hi All,
I am working on CRM webclient reporting. I have the issue in Production system. In production system I am able to see alll the reports. Ex;- I want to see the Accounts all accounts I am able to see. But when I choose any account by clicking on that it is not displaying means I am not able to drilled down.
But in the same time I am able to drill down reports in DEV and QAS. Any suggestion----
Thanx
Chinmaya

Hi Rupesh,
Thanks for your reply. I have given every dam authorization to that user and user is assigned to org model also as manager.
Thanx
Chinmaya

Similar Messages

  • BexGetData over data elements that are not drilled down

    Hi,
    I create a query in the query designer open the same in the analyzer. I perform navigations on the same and convert the worksheet to formula.
    Now the BexGetData formula contains references only to the items that have been drilled down in the rows or columns. Is it possible to reference the data elements in the free characteristics section (which have not been drilled down in the workbook before i convert to formula).
    Basically I am trying to avoid having to retrieve a large amount of information if I need to build a formula based on many data elements.
    Thanks
    Shailesh
    Message was edited by:
            Shailesh Unny

    Well you cannot as the BexGetData  works with the Analysis grid and its cells which are displayed in the result areas (rows and columns) and doesnt refer to Free chars
    PS-
    To avoid formula errors being displayed when you open the workbook in formula mode, configure the data provider for the analysis grid such that the results are displayed offline. This allows you to display the data in your result set without the need to connect to the server.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/015369f54f4a0ca19b28c1b45acf00/content.htm
    Hope it Helps
    Chetan
    @CP..

  • Web Analysis does not drill down (Essbase datasource)

    Hi!
    I have a web analysis document which does not drill down to next level when double clicking on a parent level. In my report I have children of Area dimension selected individually and their parent on rows ( this means I have not used selection where I select only top member and its children; this is because one of the children should not be in the report). This is not an security issue, because I have admin rights to the essbase cube.
    Usually when double-clicking on a member in report it should drill down to next level. This report does not drill down.
    The strange thing is that if I select "Keep Only" for the top member of that dimension and then double-click it then drills down nicely???
    When using a excel add-in and retrieving data there the same kind of report drills down without problems. Any ideas why this drill down does not work properly in Workspace (and also in Web Analysis Stuidio) ?
    kind regards,
    user637777

    Hi!
    I checked out the dimension in question. It seems to have implied shares (parent having only one child). There seems to be implied shares in almost all child hierarchies which might explain the web analysis behaviour.
    We are using V11. The application is an aggregate storage application.
    Edited by: user637777 on 4.6.2010 3:06

  • Reg: Calling Report in KPI Drill Down

    Dear Friends
    Is it possible to call report in KPI Drill Down. (This facility is available in Hyperion). So my client is expecting the same & what is solution
    in this scenario. The report has different measure. For Example calculation of ROCE.
    The report consists of PBT, Capital Employed details and want to see once press ROCE KPI.
    Rgds
    SriG

    Les and Sri,
    In version 7.5 there was a 'Mark this page' link in Reports and Dashboards in SSM but this disappeared in 10.0 and has not reappeared in 10.1. If this was there then you could create the report in SSM easily get the URL and use the Associated Link to link back to it.
    I've had an enhancement request in the Ideas Place 'Mark this page in Reports SSM 10' D4651 for a long time and all votes would help to get this back!
    Regards
    Colin

  • Reports are not called from form in browser plz help

    Hi,
    I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
    from as,
    Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
    Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
    My database is installed in drive E:\8idb_home\ and 9iAS is on
    G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
    Plz help!
    Many thanks!

    Hi,
    First of all thanks to Vincent Botteman for solving the prob.
    Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
    Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
    Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
    Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
    Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
    Regards!

  • Reports are not posting with report repository webserver configured for Sin

    Hi Everyone,
    We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
    Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
    Report Node Definition
    Node Name: uadb1
    URL: https://dv001.test.com:8450/psreports/uadb1
    Connection Information
    https
    URI Port: 8450
    URI Host: dv001.test.com
    URI Resource: SchedulerTransfer/uadb1
    Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

    Duplicated thread : Reports not posting if using Single Signon webserver as report repo
    Nicolas.

  • Reports are not able to run coz of Block Corruption

    Hi all,
    I have reported some Oracle finance reports are not running.
    Once i got the call i looked into the user trace file, there i found the below :
    Corrupt block dba: 0x2100f345 file=33. blocknum=62277. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f345 file=33. blocknum=62277. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62277
    Corrupt block dba: 0x2100f346 file=33. blocknum=62278. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f346 file=33. blocknum=62278. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62278
    Then i try to find out which table is affected by the below queary :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 62278 between block_id and block_idblocks -1;+
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    So this above table GL_JE_LINES is the affected table is init.
    Now what is the action i have to take. In this database there is no archive log enabled and version of this database is 7.
    Can any one sugges me what is the action i have to take now.
    Regards
    Hamid

    DB version :
    SQL> select * from v$version;
    BANNER
    Oracle7 Server Release 7.3.4.3.0 - Production
    PL/SQL Release 2.3.4.3.0 - Production
    CORE Version 3.5.4.0.0 - Production
    TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
    NLSRTL Version 3.2.4.0.0 - Production
    Alert log :
    SID>tail -f alert_SID.log
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 15:09:18 2012
    create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10                                                                             0m
    Tue Sep 25 15:09:27 2012
    Completed: create tablespace tbs datafile '/stage/software/AP...
    Trace file :
    SID>tail -f ora_84426_aprd.trc
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 119654
    Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d367 file=33. blocknum=119655. found same corupted
    For this above :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    Regards
    Hamid

  • Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

    My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
    But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
    Please send me the solution on urgent.
    Thanks.
    Shahzad

    Hi Paul,
    We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
    Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
    The command for SQL Server 2012 is:
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
    I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
    folders>
    DTS
    SDK
    Tools
    srkr

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • Business Objects 3.1 reports are not working with IE 10.

    Hi,
    Recently I upgraded my internet explorer to IE10.. Since then business objects 3.1 reports are not opening in IE10.0
    Getting error message "webpage can't be found".
    I am not sure whether BO 3.1 reports work with IE 10.0 or not.
    Please advise
    Thanks
    Sat

    Did you try with other browsers ?
    IE 10 (Compatibility View display mode) with Oracle Java 6 / Oracle Java 7 is supported for BOXI3.1 SP6.
    Please check the PAM for details of your SP level.

  • Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

    We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
    Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
    But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
    Edited by: Chaitu on Mar 17, 2013 8:57 AM

    Chaitu wrote:
    If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
    Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
    Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
    I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
    For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
    Hi Chaitu,
    patchset(10.1.2.3) is applicable for the following releases only:
    Oracle Application Server 10g Release 2 (10.1.2.0.0)
    Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    Oracle Application Server Forms and Reports Services (10.1.2.0.2)
    Oracle Application Server Portal 10g Release 2 (10.1.4)
    Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
    Oracle Developer Suite 10g (10.1.2.0.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
    OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
    OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
    Hope this helps
    Hamid
    * batter discuss at {forum:id=82} forum.

  • Oracle 9iAS R2 - reports are not working  - JSP Error

    dear All
    We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
    ==============
    500 Internal Server Error
    OracleJSP:
    JSP Error:
    Request URI:/repdemo/examples/Tools/test.jsp
    Exception:
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
         at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
         at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
         at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
         at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
         at oracle.reports.definition.RWReport.done(RWReport.java:1087)
         at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
         at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
         at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
         at examples.tools._test._jspService(_test.java:292)
         [SRC:/examples/Tools/test.jsp]
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    -=================
    please help to resolve this issue.
    thanks in advance.
    regards

    Dear All
    Just to share the solution of the problem.
    We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
    regards

  • Report painter  and drill down reports

    Hi SAP gurus,
                   Can any froward configuration of  report painter  and drill down reports.
       iassign points

    Hiii Sai Krishna,
    can u forward the same documentation to me..plsss
    my mail id - [email protected]
    thanks in advance
    regards
    ramki

  • Transporting reports are not overwritten

    Hi,
    Problem related to Transportation:
    I transported some reports from DEV to QA. After that I made some changes on the transported reports and again I transported with another request, but those reports are not overwritten.
    can you please post some points how can I solve this..
    Regards
    Rajesh

    Hi rajesh,
    Have you released the early transport request.
    After doing changes in reports have you activated all  and saved in request.check it.
    Try to collect all in Transport connection in one request once again and transport the same to QA.
    Let us know status....
    Reg
    Pra

  • Expense reports are not processing for future date?

    hi folks,
    in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
    can anybody assist me to come out of this issue.
    thanks in advance,
    regards
    bhanu

    HI,
               Could you please share how to go  Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
    ********INSERT IT0032 FOR CANDIDATE ID *************
    P0001-PERSG<>'5' - True
    P0000-MASSN='01'/X
    P0000-MASSN='H1'/X
    P0000-MASSN<>'84'/X
    P0000-MASSN<>'86'/X
    P0000-MASSN<>'99'/X
    GET_PNALT(ZHR_CREATEP0032)
    RP50D-FIELDS <> ''
    INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
    P0032-PNALT=RP50D-FIELD1
    P0032-ZZ_COMPID='05' _ True
                  Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the  subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
    Do you have any Idea about how to debug the  program.  used in dynamic action
    Regards,
    Madhu

Maybe you are looking for