Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
Please send me the solution on urgent.
Thanks.
Shahzad

Hi Paul,
We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
The command for SQL Server 2012 is:
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
folders>
DTS
SDK
Tools
srkr

Similar Messages

Reports are not run when connect VPN

I have installed Oracle Forms & Report Services (Standalone) on windowXP (SP-3). My problem is:-
1) After restart OS i connect VPN when VPN is properly connected i run my application. Forms run properly but when i want to run report it shows error 'rep-51002: Bind to report server rep_localhost_bs_appsrv failed'.
2) After restart OS i did not connect VPN and then run reports its running properly and not showing any error.
I want the solution of 1st case. Please help me urgent.

You need to put the IP address in the hosts file.
Also verify if your Default Gateway at networking level is configured for the NIC. The Default Gateway information could be displayed executing 'netstat -anr'.
Also check the network through nslookup.
Is http service is running?
How many network adapters are there?
Has IP address changed?
What's your operating system?
Also don't say urgent in your questions, because urgent questions are answered by the paid support.
regards

How to determine if reports are being run/used

I have two Crystal report environments. One being version 7.5 and the other is version 10. Between them, there is a very large number of reports (1000's) that accumulated over the years. I am looking for a way to be able to tell which reports are being run and actually used. By used I mean actually being pulled from the repository. I do not know all the specific details of the environments and not a CR expert so it is hard for me to provide too much more details. Any help or suggestions on how to try to determine which reports are being used is greatly appreciated.

You mention; "Crystal report environments"
and
"pulled from the repository"
Question is; what is the Crystal report environment in your definition? E.g.; what is the actual product? It could be what used to be called Crystal Info (v 7), Crystal Enterprise (v. 10). Or it could be an app written by someone in your organization. Or it could be an app written by a 3rd party.
In any case, getting answers for these products will be difficult as you're looking at products that are close to 10 years out of support (v. 10) and well over 10 years out of support (v. 7).
- Ludek

Reports are not able to run coz of Block Corruption

Hi all,
I have reported some Oracle finance reports are not running.
Once i got the call i looked into the user trace file, there i found the below :
Corrupt block dba: 0x2100f345 file=33. blocknum=62277. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2100f345 file=33. blocknum=62277. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 62277
Corrupt block dba: 0x2100f346 file=33. blocknum=62278. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2100f346 file=33. blocknum=62278. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 62278
Then i try to find out which table is affected by the below queary :
SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 62278 between block_id and block_idblocks -1;+
SEGMENT_TYPE      OWNER
SEGMENT_NAME
TABLE             GL
GL_JE_LINES
So this above table GL_JE_LINES is the affected table is init.
Now what is the action i have to take. In this database there is no archive log enabled and version of this database is 7.
Can any one sugges me what is the action i have to take now.
Regards
Hamid

DB version :
SQL> select * from v$version;
BANNER
Oracle7 Server Release 7.3.4.3.0 - Production
PL/SQL Release 2.3.4.3.0 - Production
CORE Version 3.5.4.0.0 - Production
TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
NLSRTL Version 3.2.4.0.0 - Production
Alert log :
SID>tail -f alert_SID.log
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 15:09:18 2012
create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10                                                                             0m
Tue Sep 25 15:09:27 2012
Completed: create tablespace tbs datafile '/stage/software/AP...
Trace file :
SID>tail -f ora_84426_aprd.trc
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 119654
Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d367 file=33. blocknum=119655. found same corupted
For this above :
SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
SEGMENT_TYPE      OWNER
SEGMENT_NAME
TABLE             GL
GL_JE_LINES
Regards
Hamid

Reports are not called from form in browser plz help

Hi,
I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
from as,
Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
My database is installed in drive E:\8idb_home\ and 9iAS is on
G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
Plz help!
Many thanks!

Hi,
First of all thanks to Vincent Botteman for solving the prob.
Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
Regards!

Is there any way to track what reports are actively running on BOE?

Good Afternoon.
I am looking for a way to track the names of what reports are currently being run on Business Objects. We are on Business Objects Enterprise XI R2 SP3 and from what Iu2019m aware, the servers can show the administrators how many connections and how many jobs are running, and the auditing command can track when a report has completed/failed (from what I understand), but nothing really tells us what reports are actively being run.
The purpose of this is to measure impact for an emergency restart of the server, track down reports that are taking up system resources, and debugging issues involved with the SDK.
Background: We have several reports hosted on Business Objects, both Crystal Reports and Web Intelligence. These reports go to different universes and databases and use several different accounts depending on the project (no central generic accounts to the databases). Sometimes when people are running several large reports (some being upwards of 1 million rows) the users will open one, leave it to run and go to open several others, killing our session limit and resources on the server. In addition, there have been times in development that restarts have been required but there was no way to tell what reports were running, just the number of them, and in several different spots (RAS, Page server, etc.).
Wish list (If my first priority is answered, Iu2019m also looking for the following):
- One to one associations of what reports are being run by what users.
- A centralized location to see what reports are being run by users opening them and what reports are being run by users scheduling them.
- The ability to u201Ckillu201D a report that is taking too long to run by a user.
- Possibly an interactive dashboard showing the number of active reports verses the serveru2019s limit, what reports are set in queue, etc.
- The u201Cstageu201D a report is running in, so if someone is running a report but its stuck at the prompt for a variable stage, querying data from the database, getting data back from the database, producing and processing the data to the screen, etc.
If Iu2019ve missed something in the Business Objects tools or if someone knows of a way to extract this type of data from the Business Objects server (3rd party tool or custom fix) I would appreciate the assistance. Thank you for your time.

Brian,
I don't know if you tried using the Query Builder.
The query below (or some modification of it) may be of some help.
SELECT
SI_SCHEDULEINFO, SI_NAME
FROM
CI_INFOOBJECTS
WHERE
SI_SCHEDULE_STATUS = 1
The SI_SCHEDULEINFO.SI_SUBMITTER property in the query result will give you the BOUSER value of the user that submitted the job.
SI_SCHEDULE_STATUS takes the following values:
0     The job is currently being processed by the job server.
1     The job completed successfully.
3     The job failed. Check error message.
8     The job is paused.
9     The job has not started because dependencies are not satisfied (e.g. Events)
Best,
Srinivas

Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
Edited by: Chaitu on Mar 17, 2013 8:57 AM

Chaitu wrote:
If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
Hi Chaitu,
patchset(10.1.2.3) is applicable for the following releases only:
Oracle Application Server 10g Release 2 (10.1.2.0.0)
Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
Oracle Application Server 10g Release 2 (10.1.2.0.2)
Oracle Application Server Forms and Reports Services (10.1.2.0.2)
Oracle Application Server Portal 10g Release 2 (10.1.4)
Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
Oracle Developer Suite 10g (10.1.2.0.2)
Oracle Business Intelligence 10g Release 2 (10.1.2)
Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
Hope this helps
Hamid
* batter discuss at {forum:id=82} forum.

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

Golden gate extract and replicate process are not running.

All,
I am trying replicate data between two oracle databases using golden gate.
I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
1. I have two databases PROD, UAT both are running on 11.2 oracle home.
2. Created the ggate user both the databases, and enabled supplemental logging.
3. Ran the following scripts in both databases.
SQL> @marker_setup.sql
SQL> @ddl_setup.sql
SQL> @role_setup.sql
SQL> grant GGS_GGSUSER_ROLE to ggate;
SQL> @ddl_enable.sql
4. Connected the source database (PROD) in ggsci prompt
GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
edit params ext1
EXTRACT ext1
USERID ggate@PROD, PASSWORD 123456
RMTHOST home-c07402bbc5, MGRPORT 7840
rmttrail C:\app\Bhanu\Goldengate\lt
ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
TABLE bhanu.*;
5. Connected the target database(UAT) in ggsci prompt
add checkpointtable ggate.checkpoint
edit params ./GLOBALS
GGSCHEMA ggate
CHECKPOINTTABLE ggate.checkpoint
add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
edit params rep1
replicat rep1
ASSUMETARGETDEFS
userid ggate@UAT, password 123456
discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
map bhanu.*, target kiran.*;
After that started the extract, replicat using
start extract ext1, start replicate rep1
Now the status.
GGSCI (home-c07402bbc5) 103> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:11:43
REPLICAT STOPPED REP1 00:00:00 00:21:16
Can you please help me what is wrong in my setup and why extract and replicate process are not running.
Edited by: user12178861 on Nov 19, 2011 11:22 AM

Thanks for your quick reply.
I have done few changes but extract, replicate process not running.
couple of points I would like to share with you regarding my setup.
1. I am using single golden date instance to replicate the data between PROD and UAT databases.
2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:23:29
REPLICAT STOPPED REP1 00:00:00 01:33:02
GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 4> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 6> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:24:10
REPLICAT STOPPED REP1 00:00:00 01:33:44
Target :
GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
ERROR: REPLICAT REP1 already exists.
GGSCI (home-c07402bbc5) 6> delete replicat rep1
Deleted REPLICAT REP1.
GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
REPLICAT added.
GGSCI (home-c07402bbc5) 8> edit params rep1
GGSCI (home-c07402bbc5) 9> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 10> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:29:46
REPLICAT STOPPED REP1 00:00:00 00:00:48
3. Is mandatory that I need two golden gate instances running each side ?
Thanks for spending your time on this problem.

Trying to capture what reports are being run and by what users

Hi all,
A few months ago, we upgraded to Discoverer 11g. One of the fixes I was hoping for was the updating of the query statistics table to see what reports are being run and who was running them.
The problem is that most users are running Discoverer Plus but they are not "gracefully" closing Discoverer Plus via File -> Exit. They simply hit ths "X" to close the window. Oracle says that when users do this, their statistics are not written to the query statistics tables. I am finding that the EUL workbooks that we have installed are pretty useless due to this and really the only reason I have left the query statistics logging to be enabled. I am now seriously considering disabling this as it is very inconsistent (we do trim the query statistics table on a rolling 180 days of history via concurrent program that deletes stats older than 180 days).
I am wondering if anyone here has done any logging of what workbooks are being run through some trigger? I see there is a EUL trigger function that we have in place, called post save documents, it records the workbook name, sql, etc. But it does not record the date that it was run. Has anyone modified this trigger so that every time a report is run it logs the report, sql, user and when it was being run to the table?
I have an Oracle SR open, I've asked this in a couple different ways but they keep coming back to a canned answer of "if the user does not do File -> Exit, it will not log their session to the statistics table... blah blah blah".
I hope I am making sense in what I am asking for.
Thank you.
Regards,
Jerry

Hi,
I have never found the Discoverer stats to be very useful for some of the reasons you have given.
I don't see that an EUL trigger will do what you want as unfortunately there is no open document trigger. So to get any information you have to rely on the user saving the workbook.
One option you could explore is to use a DBMS_FGA (fine grained access) policy to audit some of the Discoverer query statements. For example, you can add a FGA policy to the EUL5_DOCUMENTS table that records all SELECTs on the table. That will show you which users are opening the workbooks you have in the EUL. Or you could add a policy to the views/tables used in the Discoverer workbooks and then audit the selects with an audit condition to audit only Discoverer sessions.
How you do it depends on exactly what you want to audit.
Rod West

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

Reports are not matching

Hi,
There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
Your suggestions/inputs will be highly appreciated.
Regards,
Bala

Hi,
Thanks for your inputs. I have 2 queries here...
1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
2. How can I check the Balance amount still remaining in the project? Is there any report?
Thanks & regards,
Bala

Please i need help the forms are not running

the forms are not running by internet exp and i am trying all of things , then i am working now with Firefox and the problem still running and the error is additional plugins are required to display all the media in this page
what can i do to running forms correct
Message was edited by:
user616145

i could not understand ur prob. clearly. U run form from application server or just using oracle oc4J of oracle 10gDS in ur local machine? When u run ur form what kind of error u see?
- tkarim

Oracle 9iAS R2 - reports are not working - JSP Error

dear All
We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
==============
500 Internal Server Error
OracleJSP:
JSP Error:
Request URI:/repdemo/examples/Tools/test.jsp
Exception:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
     at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
     at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
     at oracle.reports.definition.RWReport.done(RWReport.java:1087)
     at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
     at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
     at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
     at examples.tools._test._jspService(_test.java:292)
     [SRC:/examples/Tools/test.jsp]
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
-=================
please help to resolve this issue.
thanks in advance.
regards

Dear All
Just to share the solution of the problem.
We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
regards

Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

Similar Messages

Maybe you are looking for