Reports are note retreieved by the application if opened in Crystal Report

Hi to all.
I am trying to modify one report used by an application I use. The application is made with .NET and, when I launch a preview or a print of this report, the report is not loaded if it is already opened in Crystal Report. To have it loaded, I must close it from Crystal.
Some time ago (july 2011), this was not a problem. I don't know if .NET version is changed or if Crystal is upgraded. I have CR Developer 12.2.0.290 version installed and the application runs under .NET frameworks from 2 to 4. In tehs erver machine are also installed CR Basic Runtime for V.S. 2008 and C.R 11_5 NetSetup.
Does anybody know if I can try previews whit RPT opened in C.R ?
Many Thanks.

You should be able to. I am not aware of this being a problem with CR 2008 (12.x). There was an issue like this with CR2010, but SP2 solved that. Lets' see what SP4 for CR 2008 does for you:
SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
SP4 MSI
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
SP4 MSM
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

SWF movies are not animated when the file's opened directly.

Firstly, although I've been using Flash on and off for years (since CS3) I don't use it very often so I apologise if my issue seems simplistic!
Basically, I used Flash CS3 for a few years to create basic animations for clients, involving simple scrolling text, without any problems. Recently I upgraded to the CS4 Master Suite and then CS5 Master Suite within a couple of days of each other and I now need to use Flash to make a change to an old animation. When I opened the CS3 file it appears as expected and I made the changes to the text (changing a word or two within a line of type).
When I right clicked on the type relevant frames within the timeline I noticed that there is now more than one version of tween available, and that classic tween was already selected (I think I better buy a new teach yourself Flash CS5 book!)
Anyway, that was allI needed to do so I initially pressed return and the text scrolled across the stage as expected. But when I clicked on CONTROL / TEST MOVIE / TEST (or cmd+Return on my Mac) the SWF file that appears is static and the text does not scroll at all. If I publish the movie using Actionscript 3 or 2 the resulting SWF file is also totally static. But if I drop the SWF file into the relevant website folder and view it through Dreamweaver's browser view facility it works perfectly and scrolls just as expected. Equally, opening it using the Opera browser works too.
I've tried altering the CS3 file and testing the movie in Flash CS4 and Flash CS5 but the same thing happens. It's a bit time wasting and inefficient wanting to test an animation as a SWF file by double clicking on it and only being shown a static image. Is this a well known problem as I couldn't find any mention of it during my search?
Thanks for reading and I'd really appreciate help resolving this issue.

Update:
I downloaded the newest Flash Player and double clicked the problematic swf file again. I was a bit surprised to see Flash CS5 start up and display the floating test window with the problematic static animation as before. I closed Flash CS5, right clicked on the swf file and chose "Open With Flash Player". The animation opened in the new Flash Player and was working fine.
So it appears that only Flash CS5 and CS4 are having the issue playing the test movie that was created in the very same program?

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Crystal Report: irregular error not handled by the application component

Hi all,
The error message u201Cirregular error not handled by the application componentu201D comes up when I run any of the Crystal Report in the SAP Business One.
But this error happens only in the client Machines, from the Server I can run the report normally.
Thanks and Regards,
Alberto Franç

Hi,
It seems installation and registration problem, have you tried to other client computers? Try to reinstall the Crystal Report in client.
Regards,
Clint

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Why it is popular applications are not included in the official repo?

Why it is very popular applications like yaourt (GPL), pacman-color (GPL) and many other free programs are not included in the official repositories?
Why not create an official "non-free" repository for popular non-free software?

There will never be an AUR helper in the official repositories because it runs counter to the AUR policy - which is: it's unsupported, so we're not facilitating its use. You need to be aware about the potential drawbacks of its usage, which involves getting you, the user, to make that call to install an AUR helper - which involves more than just calling pacman. Can't comment on pacman-colour, but apart from colour, it doesn't really add any functionality afaik .

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g!

Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g! I just want to know.

Once I find the game i will truly screenshot that it states "not compatible for these models". I just find it RIDICULOUS that my iPod touch is in good condition and some of the applications that I want download sometimes are not compatible with my iPod touch 4g. I am not going to buy an ipod 5th generation if my 4g is still going strong since the year of 2010.

TS1702 Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situat

Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situation for all practical purposes. How do I get out of this situation?

Try a reset:
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
4. Ignore the red slider

Portal Forms are not displayed in the new migrated environment.

Hi All,
We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and access the componets. Recently we have done a migration.The Database along the Portal Repository in system2 was migrated to a new server. For this we have edited the DAD and made the necessary changes. But after the migration, the Forms residing in migrated portal repository(System2) are not getting dispayed.The rest of the things(Reports, Pages, Links,LOVs etc..) are working fine. The forms are not getting displayed in the pages where it's added. When forms are run from RUN link in Develop Tab it's showing ERROR but not the cause of the error. Will anyone tell what changes I have to do to make the Forms work?
Thanks in Advance,
Tom

Hi DIAdemUser1,
This feature was indeed removed. R&D felt like it caused more confusion than benefit, and I agree. I do apologize to you and others who liked the feature that has now disappeared. When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity. I often miss that feature, but it's for the greater good.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Leading zeros are not displaying in the excel

Hi Experts,
Leading zeros are not displaying in the excel
Here is the situation:
I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
Normally our material numbers will start with zeros.
But when I check the email excel file , leading zeros are not displaying.
Even I checked the application server (AL11) file, zeros are there.
I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
Could you please advise, how to display leading zeros to the material number in excel file.
Thanks in advance
Raghu

Application server file showing zeros infront of the material number.
1200# 0012401387# XXXXXXXX
Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
I checked custom FUNCTION MODULE . No mistakes in that.
===
Sudhir,
As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
Application server file showing like below
1200# '0012401387# XXXXXXXX
===
Could you please advise anyone how can we acheive this.
Thanks

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Icons are not visible when the form is run

I develop a form with only a push button. I developed form using oracle 10DS. I have saved my form in application server. To see an icon in my button, i did the following things:
1. In application server i made a jar named test.jar. It consists of just two gif images.
2. I copied this jar in application server's \forms90\java directory
3. I configured formsweb.cfg file as the following.
4. my \form90\java\oracle\forms\registry\registry.dat is as the following.
whenever i run form i can not see icon but in client's oracle jar cache jar is downloaded.
-------------------------------formsweb.cfg -------------------------------------------
=========================
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
#baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime
processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array%
obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record%
tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=codeBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow
_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar,classes12.jar,test.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer,
etc)
archive=f90all.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0017-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,17
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.17
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version
=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7
# Single Sign-On OID configuration parameter
oracle_home=E:\Oracle_SHLAS
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group,
orclApplicationCommonName=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7,
cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle
JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
[test]
form=E:\ict\ITSUPPORT\test.fmx usesdi=yes
userid=support/s00001@dshl
width=100%
height=100%
colorscheme=blue
pageTitle=ICT Support :: Just in Time
imagebase=codebase
archive_jini=f90all_jinit.jar,rolloverbutton.jar,getclientinfo.jar,infobutton.jar,test.jar
webUtilArchive=frmwebutil.jar,jacob.jar
baseHTMLjinitiator=webutiljini.htm
#lookAndFeel=Oracle
splashscreen=ash.gif
logo=none
separateFrame=false
******************************************** registry.dat
---=========================
# This is the Registry file.
# This file contains the logical [Java] Class name and an associated
# [numerical] identifier that will be used to refer to objects of the
# class in order to reduce the amount of information that needs to be
# repeatedly transmitted to the client.
# This file is of the Form understood by java.util.Properties (for now)
# The System Level sound file is relative to the CODEBASE
oracle.classById.1=oracle.forms.engine.Runform
oracle.classById.4=oracle.forms.handler.FormWindow
oracle.classById.5=oracle.forms.handler.AlertDialog
oracle.classById.6=oracle.forms.handler.DisplayList
oracle.classById.7=oracle.forms.handler.LogonDialog
oracle.classById.8=oracle.forms.handler.DisplayErrorDialog
oracle.classById.9=oracle.forms.handler.ListValuesDialog
oracle.classById.10=oracle.forms.handler.EditorDialog
oracle.classById.11=oracle.forms.handler.HelpDialog
oracle.classById.12=oracle.forms.handler.FormStatusBar
oracle.classById.13=oracle.forms.handler.MenuInfo
# oracle.classById.14=UNUSED
oracle.classById.15=oracle.forms.handler.ApplicationTimer
oracle.classById.16=oracle.forms.handler.MenuParametersDialog
oracle.classById.17=oracle.forms.handler.PromptListItem
oracle.classById.18=oracle.forms.handler.CancelQueryDialog
oracle.classById.257=oracle.forms.handler.TextFieldItem
oracle.classById.258=oracle.forms.handler.TextAreaItem
oracle.classById.259=oracle.forms.handler.FormCanvas
oracle.classById.261=oracle.forms.handler.ButtonItem
oracle.classById.262=oracle.forms.handler.CheckboxItem
oracle.classById.263=oracle.forms.handler.PopListItem
oracle.classById.264=oracle.forms.handler.TListItem
oracle.classById.265=oracle.forms.handler.CfmVBX
oracle.classById.266=oracle.forms.handler.CfmOLE
oracle.classById.267=oracle.forms.handler.RadioButtonItem
oracle.classById.268=oracle.forms.handler.ImageItem
oracle.classById.269=oracle.forms.handler.IconicButtonItem
oracle.classById.270=oracle.forms.handler.BlockScroller
oracle.classById.271=oracle.forms.handler.JavaContainer
oracle.classById.272=oracle.forms.handler.TabControl
oracle.classById.273=oracle.forms.handler.ComboBoxItem
oracle.classById.274=oracle.forms.handler.TreeItem
oracle.classById.281=oracle.forms.handler.PopupHelpItem
# Defaults for the Font details, all names are Java Font names. Each of
# these parameters represents the default property to use when none is
# specified.
# defaultFontname represents the default Java fontName.
# defaultSize represents the default fontSize. Note that the size is
# multiplied by 100 (e.g. a 10pt font has a size of 1000).
# defaultStyle represents the default fontStyle, PLAIN or ITALIC.
# defaultWeight represents the default fontWeight, PLAIN or BOLD.
default.fontMap.defaultFontname=Dialog
default.fontMap.defaultSize=900
default.fontMap.defaultStyle=PLAIN
default.fontMap.defaultWeight=PLAIN
# Default Font Face mapping.
# appFontname represents a comma delimited list of Application Font Names.
# javaFontname represents a comma delimited list of Java Font Names.
# The number of entries in the appFontname list should match the number in
# the javaFontname list. The elements of the list are comma separated and
# all characters are taken literally, leading and trailing spaces are
# stripped from Face names.
# Note that this file uses the Java 1.1 Font names in order to be able to
# handle the NLS Plane (BUG #431051)
default.fontMap.appFontnames=Courier New,Courier,courier,System,Terminal,Fixed,Fixedsys,Times,Times New Roman,MS Sans Serif,Arial, Kunstler Script
default.fontMap.javaFontnames=MonoSpaced,MonoSpaced,MonoSpaced,Dialog,MonoSpaced,Dialog,Dialog,Serif,Serif,Dialog,SansSerif, Kunstler Script
# The Application Level icon files are relative to the DOCUMENTBASE
# example: icons/
# or an absolute URL.
# example: http://www.forms.net/~luser/d2k_project/
default.icons.iconpath=
default.icons.iconextension=gif
# Application level settings to control UI features
app.ui.lovButtons=true
app.ui.requiredFieldVA=false
# The background color is specified as an RGB triple.
app.ui.requiredFieldVABGColor=255,0,0
---====================================
I tried many times. But could not be successful. Then I just kept my icons in
\forms90\java directory without making jar. In my form, icon file name is the icon name without extension. Here, i can see my icon in button. but if i replace an icon
without changing the name of the icon, then i always see the old icon. The new icon, i can not see.
Please, help me with only Oracle 10g AS how i can see icon in button. Let's assume, there is not oracle 10g DS (any development tool) in the machine where the form is run.
Please, guide me clearly step by step so that i might be successful.
Thanks.
TKARIM

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

Reports are note retreieved by the application if opened in Crystal Report

Similar Messages

Maybe you are looking for