Reports Background Engine Automatic Shutdown

Hi There!
Is there any command to automatically close the Reports Background Engine when Reports are run from Forms....
Thanks!
Vidu

hello,
if you submit a job to the reports server and the first parameter in the parameterlist is
add_parameter(var,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'Yes');
then the RBE will shut down.
regards,
the oracle reports team

Similar Messages

  • How to close "Reports Background Engine" automatically

    Dear Sir,
    I wanna close "Report Background Engine" automatically after closing the report.
    I tried to add the following parameter to close it in the caller form, but it didn't work:
    add_parameter(p1, 'oracle_shutdown', TEXT_PARAMETER, 'Yes') ;
    Waitting for Help!

    Hi,
    I think the problem might be with oracle_shutdown being in small case letters or you are using a version of forms6 or 6i that this line doesn't work due to a bug via Oracle in the engine ..
    Here is my line to shut down the report background engine.
    Add_Parameter(pl_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'Yes');
    Thanks
    Mary Santry

  • Reports Background Engine - How To Automatically Close?

    I use Developer 6. When I run a Reports, using RUN_PRODUCT built-in from a menu, a REPORTS BACKGROUND ENGINE starts up automatically, and it opens a session with the server, and runs reports. Since it is in another session, I cannot use uncommitted records created in my Forms Runtime session in any of the reports.
    Further, when I exit out of my application, this REPORTS BACKGROUND ENGINE stays put. The user is expected to physically go and close this window, and consequently the Oracle session at the server end.
    I've been unsuccessful in figuring out how to close this window and exit from my Application.
    Could any one enlighten me on how to close this REPORTS BACKGROUND ENGINE while exiting out of my application programatically please?
    Regards,
    Ram

    hello,
    you can use the ORACLE_SHUTDOWN parameter to shutdown the RBE.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                       

  • Automatically close report background engine

    After running a report with a graph in it from Forms using run_product, how can you automatically close the reports background engine and the graphics engine that get left open.
    Thanks!

    Hi,
    If you add another parameter to the parameter list as shown below, it will shutdown the background engine when you close the report.
    ADD_PARAMETER(PL_ID,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
    Hope this helps,
    Haritha

  • Closing the report generating engine automatically

    how can i close the report generating engine after displaying a report automatically ie when closing the report window the report generating engine also need to be closed. now i have to manually close the report background window also and it becomes annoying to users . i am using the rdf files and not rep files.

    There is a parameter ORACLE_SHUTDOWN. Set it to YES.
    When you have large, complex reports, the Reports Background engine sometimes eats lots of memory and leads to GPF. If you have lots of GPF when running a report, you should use this parameter.
    null

  • Report background engine

    hi
    i am using reports6i. every time i run a report, the report background engine appears in my task bar. By closing the report, it still persists in the task bar, and i have to close it manually.
    Is there any way that by closing the report, the report background engine shuts down automatically.
    tofa Mustafa Ghulam
    Lahore, Pakistan.

    You can try to add this parameter to the call of report
    "oracle_shutdown=yes"
    Sorry, but i am not sure of the name of the parameter and i cannot find the reference anywhere. If i find it i will post an update.

  • CAN NO LONGER SHUT DOWN REPORTS BACKGROUND ENGINE

    Hello all...
    We are in the process of upgrading our apps to Developer 6.0.
    Come to find out that the old method of shutting down the Reports
    Background Engine programmatically no longer works. (i.e.
    ORACLE_SHUTDOWN=Yes).
    Any info would be very much appreciated.
    Thanks
    null

    The mDNSResponser error has been reported as a problem with "Back To My Mac" and sometimes with Bonjour. There are probably other causes as well, but that's a place to start. You could make sure those services are disabled and check the logs to see if the errors go away.
    I suppose that activity like this could stall a shutdown also, but I usually see the shutdown problem with devices not behaving and allowing the system to do an orderly shutdown.
    Another test method that could point you directly to the OS or a 3rd party application would be to create another user on your machine and see if that user has the same issues.
    Just because something worked before doesn't mean that a recent update or other change hasn't caused a problem. Are you using a wireless connection or hardwired? If you are wireless then you could also stop or turn off the wireless connection before trying to shutdown to see if it could be part of the problem.
    The trick to begin troubleshooting a problem is to remove the variables, see if something changes, and then decide what to do about it or look for help with that particular system or sub-system.

  • Get rig of Reports Background Engine at the bottom of screen

    The Reports Background Engine is automatically placed at the bottom when a report is called from Form Builder. It remains there even if closing the report or exiting out of the application. Is there a way to close it automatically on exiting the application?
    Any solutions?
    Thanks.
    null

    Hi,
    The answer is to use HOST calls:
    host('runrep user/password ...');
    See the details for the runrep command.
    This should do.

  • How avoid multi reports background engine (D2K6I + patch7  C/S)

    after Developer tools migrate from D2K60 to D2k6i (with patch7), if call multi reports with ASYNCHRONOUS comm mode from forms, these will have multi reports background engine will startup, so need more session will connect to database, this is my need.
    So I need have method to avoid startup multi reports background engine.
    Not suggest me with SYNCHRONOUS comm mode or automatic close report background engine. the above two methods are difficulty to carry through for me.
    Thanks & test regards!

    Before developer tools migration, When run a set of reports with ASYNCHRONOUS comm mode, only one reports background engine startup, and all report as queue requests in the reports background engine, this is my need. I don't want any change because developer tools migration
    Please give me your idea, Thanks again.

  • Reports Background Engine fails

    Hello,
    sometimes happens that Reports Background Engine fail and Form application stop responding. Only way is shutdown Form application. This problem occur randomly, but on some computers it happens frequently with the same report.
    Where is the bug?
    Thanx

    pls contact oracle support services for further investigation of your problem. this requires detailed investigation of your environment that goes beyond what can be done here in the forum.
    thanks,
    ph.

  • Closing Reports Background Engine from VB

    I have a Visual Basic 6 application that runs Reports 6 reports with the ActiveX control Rwsxa60.ocx. When you close the application, the Reports background engine is still open. Is there a way to close the engine through VB? Thanks in advance for any suggestions.

    you can not close the RBE from reports as it would require a report to be executed ... i guess you get the problem.
    the only way to close the RBE is from forms.
    thanks,
    ph.

  • Close Reports Background Engine from reports

    Hi,
    I have a report that calls another report via SRW.run_report. Qhen the other report is called, Reports Background Engine opens and stays open, even after closing the called report.
    How to programmatically close Reports Background Engine when closing the report. I have read on the forum some procedure to close it from "Forms", but not from report.
    Thank you,
    J

    you can not close the RBE from reports as it would require a report to be executed ... i guess you get the problem.
    the only way to close the RBE is from forms.
    thanks,
    ph.

  • Report Background Engine Taking long time to open

    I am seeing this problem. When I run a report (in forms 6i), I get a "FRM-41211: Integration error: SSL failure running another product". The Report background engine doesn't come up right away... looking at the system process the RBE starts using almost 50% of the CPU and takes about 10 min to come up. If I run it on my local machine, just running the executable (c:\oracle6i\bin\RWRBE60.EXE) it comes up right away... on this users it doesn't. We think it may be something blocking it... anyon ehave any suggestions?
    Thanks,
    Scott

    Hello
    I recently had that same problem with FRM-41211 error. It turned out eventually that the culprit was newly installed HP Deskjet printer on that employees computer. When I removed the printer and uninstalled its driver reports started to work normally. Hope that helps.

  • Report background engine not generated

    Hi Friends,
    I have installed Developer 6i -Forms and Reports.
    When I try to run a report in an aplication after giving parameters in the paraform it gives an error illegal operation for rwbe60 it doesn't generate the background engine and so the report in not run.
    If i run the same report through report builder it runs but no report background engine is generated.
    Pls give a solution uf anyone can.
    Thanks in advance
    Manoj

    Hi,
    Add the following:
    add_parameter(pl_id, 'ORACLE_SHUTDOWN', TEXT_PARAMETER, 'Yes');
    Note, the 'Yes' is case sensitive. The 'y' must be upper case followed by lower case 'es'.
    run_product(REPORTS, '<repname>', SYNCHRONUS, RUNTIME, FILESYSTEM, pl_id);
    Best Regards,
    Arun Malhotra,
    Oracle Support Services

  • Report Background Engine Memory Increasing on Reports 6i

    Hi... we recently upgraded our ERP system from Developer 2000 to 6i. Some of our functions require many reports to print at once (labels, invoices, pick tickets, etc).. What we've noticed is that when we do this, the report background engine increases in memory significantly and does not release the memory when finished.... and can cripple the work station.
    We know we can issue the Oracle_shutdown parameter to close the RBE after each report, but are there any other options as we feel this may slow down our printing?
    Thanks,
    Scott

    If you use "dynamic" ref cursor, your package specification must have "dynamic" ref cursor type for (dynamic) query
    (from 9i we can use predefined SYS_REFCURSOR built-in data type) and "static" ref cursor type for Report Layout.
    SELECT statement in "dynamic" ref cursor must have the same number and type of columns as "static" ref cursor type.
    And, of course, your package must be stored (=database) package, because PL/SQL engine in Reports 6i is v.8.0
    but "dynamic" ref cursor is a new feature of PL/SQL v.8.1.
    See
    re:re:re:Can we create report based on stored procedure
    Regards,
    Zlatko

Maybe you are looking for

  • Ipod touch no longer connecting to wifi/internet

    Have had my ipod touch for over a year. Just yesterday it stopped connecting to the internet/our wifi router. We have a 1TB time capsule that it has been connecting to fine but not anymore. Our mac mini and laptop still connect to it, but not the ipo

  • Problem in Schemas import from one database to another

    Hi, I have to import the schemas from one database (10g release 1) to another database (10g release 1). But the problem is that through simple import (imp) the system privileges, object privileges & other things are not importing to import file. Ther

  • *Syncing New Facebook contacts to be added to phone contacts ?

    My facebook contacts are synced with my phonebook. But when I add new friends to my facebook, then are not added to my phone. How do i do this ??? I've been trying for days! On my facebook when i click settings there is no option to sync contacts. So

  • Lightroom 4.2 Mac OS 10.8 CPU Performance

    I am trying to start a discussion to MAKE Adobe move on fixing this issue of SLOW workflow and horrible hogging of the CPU.  If this doesn't get resolved, my iMac (along with yours) is at rick of being damaged from maxing out CPU ALL THE TIME.  I can

  • Adobe Application Manager removed my creative suite

    I accidentally updated Adobe Application Manager and all my creative suite is gone from my computer.    What to do?