Reports cannot be created after ip changed

We have ZfD 6.5 SP2 on an NW 6.5 SP3 server.
Before we had to change the ip-adress of this server we were able to
generate several reports with console one (tools, zenworks inventory, report).
After changing the ip adress i will get a message, that there was an error
with chrystal reports.
I changed the ip in the registry key for the sybase odbc entry.
What do I have to do, so that we are able to generate this reports again?

Am Wed, 02 Nov 2005 15:35:08 +0000 schrieb Markus Schimmel:
Hi,
> We have ZfD 6.5 SP2 on an NW 6.5 SP3 server.
>
> Before we had to change the ip-adress of this server we were able to
> generate several reports with console one (tools, zenworks inventory, report).
>
> After changing the ip adress i will get a message, that there was an error
> with chrystal reports.
>
> I changed the ip in the registry key for the sybase odbc entry.
>
> What do I have to do, so that we are able to generate this reports again?
have you changed the IP on the Database - Startup File and the Inventory
Service - Object?
have a look at SYS:\system\mgmtdbs.ncf
Is there the correct IP?
regards
Christian Mies
mailto: [email protected] or [email protected]
have a look at:
www.gne.de / www.etmiesje.de

Similar Messages

  • I cannot send sms after having change my sim card. how do i restore it?

    I cannot send sms after having change my sim card. how do I restore it?

    Contact your carrier and see if your account is provisioned properly.

  • Cannot update iTunes after motherboard change.

    iTunes was on D drive.  After MB change, D drive became E drive.  Updates fails since D drive is now the CD player. 

    Define "update". Do you mean Apple Software Update?
    The iTunes application normally installs components in Program Files and Program Files (x86) on 64-bit machines. Those folders are normally inside the system drive, which is typically the same as the boot drive. The iTunes library is normally created at <User's Music>/iTunes. If all content has been stored inside the default media folder of .../iTunes/iTunes Media then the library should be portable and can be operated from any path. Hold down shift as you launch iTunes to get an option to choose or create a library, click choose, and browse to the iTunes Library.itl file inside your iTunes folder. Playlists are all stored inside the .itl file. The library consists of the .itl file, some supporting files in the same folder and the album artwork folder, and all media that has attached to the library.
    You can't generally save the playlists independently since iTunes records them with absolute paths which may not work if/when you try to reimport. Moving a potable library around as a unit works. See Make a split library portable for background.
    tt2

  • File suddenly "cannot be opened" after no changes

    Hi
    I made this file about two weeks ago, and when I went to go look at it today, it just said "file cannot be opened" without any other information.
    I sent to a friend via Dropbox (the file had a bunch of pictures in it) after I made it and all was well,
    But she just emailed saying she cannot open it because it says she dose not have the newest pages.
    I thought I would just convert the file to Word and then put it through Dropbox, but when I tried to click on it that error message came up.
    I am 90% I have the newest update
    I can't seem to access file anywhere now. I cannot even download it again from Dropbox. I have made no adjustments since the last time I sent it. 
    Is there anyway I can figure out how to get that file again?  It's pretty important and I have spent a lot of time on it!
    I would really appreciate any help!
    Thank you 

    I went back and re-read your original post. I want to assume that you created this document in Pages v5+, but not assuming anything, is there a chance that you could have created it in Pages ’08. That certainly would generate a terse, unable to open dialog. Since your friend could not open it in Pages ’09, I suspect that it is a v5 vintage document, possibly created with a version of Pages v5 before the v5.2 update.
    I have a couple of Pages v5.2 authored documents that sit on my Desktop. They each get opened at least twice daily. Sometimes, Pages v5.2 refuses to open one or the other. It might refuse 2 -3 times, and on the next try, opens normally. Pages v5+ is not Apple's finest effort.
    There are possibilities:
    Try pressing the shift key as you try to open your document.
    If your friend still has the document you e-mailed her, have her send it back to you. See if you can open it.
    Can you open the document with Preview, or Quick Look (click to select, then space bar)?
    Do you have this document on a Time Machine backup?
    Otherwise, thanks to Apple's penchant for proprietary, cryptic document architecture, nothing on earth can resurrect the content.

  • Cannot access mail after password change

    iPhone 3G
    My main e-mail account is BTinternet.com (joined with Yahoo). Recently they updated their mail system, I had to create a new account and change my password. Then my e-mail (accessed on my Mac computer) did not work for a while. When it came on again, I was made to change my password again. I did so. Now I can send and receive mail on my computer again, both directly from the BT/Yahoo mail page and from amail client on my computer.
    I then very carefully changed the server settings on my iPhone and changed the password there (for incoming and outgoing mail) to the latest version. But now I cannot send or receive mail on the iPhone. I have checked and rechecked all settings, but all I can get is a message that my username and/or password are wrong. But they are not wrong. I have repeatedly re-entered the right version. What can I do?
    Thank you for any help anyone can offer.

    AAN2, you're a genius. Only a genius would think of something so simple. Thank you very much — and especially for being so astonishingly quick off the mark.

  • Crystal Report can't export after OS change from 32 to 64 bit

    Hello,
    Now we have lots of reports develop under WINXP (32 bit), we use crystal report 9.2.xx.x and VS2008. But we need to apply all of these to production server which use WIN SERVER 2003 64 bit.
    I have read some documents but some points still not clear.
    1. Do we need to upgrade all of these reports to use 64 bit ODBC driver? is it possible to use 32 bit ODBC driver to export in WIN SERVER 2003 64 bit? the target DB is oracle client 10g 64 bit.
    2. Do we need to amend the program code to fit the 64 bit OS. (I have tried to run our program in this server, but failed at the method of reportdocument.export), we use VB.NET 2008.
    Many thanks.

    You need to create a 32 bit ODBC datasource. See [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note and [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] for more details.
    Of course, you need to have a 32 bit client.
    You should be able to create 64 bit apps using the Crystal Reports that bundles with .NET 2008 (Crystal Reports Basic for Visual Studio 2008). This version of CR and CR 10.2 (bundles with .NET 2005) are the only 64 bit versions of CR.
    If you want to pursue the error on reportdocument.export, please create a new thread.
    For more information re. Crystal Reports and 64 bit support see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
    Ludek

  • [HELP]i Cannot start emct after i change my hostname in linux ...

    hi..
    I clone my Oracle Enterprise Linux 5 in VMware,and then i change the hostname. that clone already installed Oracle database 10g release 2 enterprise edition. i can create a database, however i cant start emctl it said
    +[oracle@ocp10g_mirror bin]$ ./emctl start dbconsole+
    TZ set to Asia/Jakarta
    OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_ocp10g_mirror.drcjah.com_ocp10g_mirror not found.
    thx...

    Hi,
    Edite the /etc/hosts and give the new hostname there and also give the new hostname in
    [root@teng ~]# more /etc/sysconfig/network
    NETWORKING=yes
    HOSTNAME=teng.domain.com
    check the ping to hostname and hostname.domain.co is pinging.
    Regards
    Kaunain

  • Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

    Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

    You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
    If you can find the problem page you would only have to rebuild it rather than the whole site.
    The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

  • Webi Reports - Object with id ... cannot be created because it has no name

    I'm trying to launch a Webi report from our application using openDocument method. When the report is launched it fails with following error -
    30567: Unable to save the document to the repository due to the following error: The object with id number '27731' cannot be created because it has no name. (Error: WIS 30567)
    Before scheduling the report I'm calling setName method to set the name of the report but still it does not work. Any help would be greatly appreciated.
    Thanks
    Manas

    Hi John,
    I will try to give you some more background about this problem.
    From our application we are not directly launching the report. We schedule it to run immediately and then view the instance created (using the instance id returned by the schedule call).
    For scheduling we use the web services API (BIPlatform) and before scheduling we fetch all the prompts (again using a webservice API). The call is something like this -
    WebiProcessingInfo wProcessingInfo = boWebIReport_.getWebiProcessingInfo();
    After that we populate all the prompts with their corresponding values in application and schedule it. However the scheduling fails with the error I mentioned in the start of this thread and when we try to view it we are presented with a screen to enter prompts again.
    From the scheduling error it looks like its failing because the name could not be set but I really doubt if thats the case. We use same calls to schedule and view Crystal reports also and they work perfectly. Only Webi is giving this error.
    Thanks for looking into this.
    Manas
    Edited by: Manas Mandlekar on Sep 10, 2008 7:14 AM

  • Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.

    Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
    == This happened ==
    Every time Firefox opened
    == A week or two ago. Not sure if result of most recent update.

    Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
    == This happened ==
    Every time Firefox opened
    == A week or two ago. Not sure if result of most recent update.

  • Cannot load the report on PDF format after running report

    Hi,
    I try to use Web.show_document to run the report thru form. After that, the PDF file cannot be shown on browser (IE5.0) but the PDF file is generated successful and if use Acrobat to open it, it work.
    An error as 'An error occurred trying to load this document'. (The Acrobat reader is loaded)
    Thanks for your help in advance.
    null

    Hello,
    I have found a similar problem, I think the problem my be with your acrobat settings.
    On Acrobat 5. open an existing pdf file. Then on the menu go to Edit\Preferences\General. => A new screen should pop-up, click on 'Options' on the left hand side, and then check out your WEB OPTIONS. I tend to untick the 'Display PDF in Browser' and leave the others ticked.
    I hope this helps.

  • How do you update apps that where purchased using different iTunes accounts?  I get a cannot connect to iTunes message and it won't accept the password even after you change it.

    Both my iPad and iPhone have the same problem.  I have purchased apps with three different accounts. I understand I will need to use the original acct to do the update but every time it asks for the password I put it in and get a message that I cannot connect to iTunes store. I have even had the password reset and it still will not connect on the upgrade.  But I can sign in with that account and purchase new apps i am loading a free one now just to make sure. So what is that about?  Please do not tell me I have to also use the original password!  We have reset them so many times that there is no way to remember the original one used at time of purchase a year and 1/2 ago.  Please help. I have also upgraded to the iCloud thinking this would solve the problem but it still exists.

    I use only one Apple ID and only one ID. I did have to change the password at one point but I had no issues at all with updating apps after I changed the password.
    If you can download new apps with the ID that you changed the password for, I would think that you will be able to update apps associated with that ID as well.
    Did you try restarting the iPad after signing out of the one account and then sign in to the other account/accounts?

  • Crystal Report (RDC) doesn't print correctly, after Printer change ?

    There are problems with the page format and the color settings for the new printer !
    It should be resolved with ADAPT01104291 FixPack3.8
    Description: Crystal reports may not print properly after users change printers by using the SelectPrinter command from the Report Designer Component (RDC). The cause of the problem is that the incorrect DEVMODE structure size is allocated to the print job.
    We are using CRXI_R2_SP5_Upgrade: ProductID=11.5.11.1470.2.26.Patch
    but we still have the problems !

    Hello Don, thank you for your extensive answer. The PCL printer of HP is not the trouble maker. The problem is obviously replicable with any other Printer Driver (Espon/Sharp/Kycocera a. s. o.)  I only installed this PCL Printer Driver of course you mentioned it in your example before.
    Okay, let's talk about the Devcap-Program and there Information about the paper source of a printer. Even in Visual Basic it's possible to get those Information by Win-API-Call's. Here they are:
    PrinterID: , AusgabeName: , TreiberName: , Port: LPT1:, TrackDefault: , PaperSize:
    Papier-Schächte:
    Automatisch auswählen, Nr: 15
    Automatische Druckeraus, Nr: 262
    Schacht 1, Nr: 261
    Schacht 2, Nr: 260
    Schacht 3, Nr: 259
    Schacht 4 (2000-Blatt), Nr: 258
    Manueller Einzug (Schac, Nr: 257
    Papier-Formate:
    Letter, Nr: 1
    Legal, Nr: 5
    Statement, Nr: 6
    Executive, Nr: 7
    A3, Nr: 8
    A4, Nr: 9
    A5, Nr: 11
    B4 (JIS), Nr: 12
    B5 (JIS), Nr: 13
    11x17, Nr: 17
    Umschlag 10, Nr: 20
    Umschlag DL, Nr: 27
    Umschlag C5, Nr: 28
    Umschlag B5, Nr: 34
    Umschlag Monarch, Nr: 37
    Jap. Doppelpostkarte gedreht, Nr: 82
    12x18, Nr: 131
    9x12, Nr: 132
    C4, Nr: 133
    Maximum 11,7 x 17,7, Nr: 134
    and even set those Information for the RDC-Sturcture, so there is a solution for the setting of the paper size.
    But there is not solution for the setting of the color nor the further page settings (Printing onesided or bothsided a.s.o.)
    I can change the default windows printer settings but that has no effect on the RDC-Print !  So I think, there must be a solution by the Crystal-Report-Design-printing-DLL (craxdrt.dll) !
    Greetings V. Hölscher

  • I downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?

    i downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?

    First make sure you are searching the name correctly.
    If the app is no longer in the App Store it is no longer available for download. This happens when Apple has found the app violates the agreement with the developer or when the developer no longer wants the app listed in the App Store.
    If the app is truly no longer in the App Store your only option is to copy it from iTunes on the computer you normall sync with.

  • Cannot open PDF after I created it in my program under PRINT

    cannot open PDF after I created it in my program under PRINT
    Tried uninstalling and re-installing
    I have Reader X to open it with but all that comes through is this message-
    ERROR: undefined
    OFFENDING COMMAND: VM?
    STACK:
    105000

    Thank you for your response...
    I am creating a file in Adobe PageMaker and wanting to make it a PDF for others to view who may not have that program.
    I am operat ing under Windows 7 if that helps any.
    The content of what I am sending shouldn't matter- just JPG's and text.
    Should I uninstall my PDF reader and Cute PDF and re-load them back in?
    Sincerely,
    Leanne

Maybe you are looking for