Reports do not render in IE 11

We have several reports built for our site that worked fine for our clients until they installed IE 11. Now most reports appear blank. After hours of researching I can create and fix the problem. The problem is that any report that contains a "line"
object from ssrs tool box will not work. if you take the line out of the report it will run and display just fine. with a line, after you put parameters in and run the report you get a blank page and all the parameters are disabled. we use the line object
for seperating message boxes, to wrap around the title, etc... Will Microsoft please investigate this and send out a fix? has anyone else experienced this? I believe this may have something to do with ajax extensions not loading on the client
side. Also, the print Icon for reporting services does not appear. there is code that we can put in to make it appear but it still doesn't print when you click it. this is all in IE 11!!
HELP!!! Charleyb3

Hi Charleyb3,
Based on the current information, I think the issue can occur due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to
the steps below to troubleshoot the issue:
Click Tools -> Internet options.
Switch to the Security tab, click Local intranet, and then select Default level.
Switch to the Advanced tab, and click Restore advanced settings.
Temporarily disable third party add-ons. For detailed steps, please see the link below:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-11
As to the print icon on the report server, you can refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/70a22cd5-df01-4f44-a83d-41022e3de557/hide-the-print-icon-for-single-report?forum=sqlreportingservices
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Report does not render image when using DoCmd.OutputTo to PDF

Hello All.... and Happy new year !!!
I have a form that has an embedded report and a series of cmd buttons to print the report or export it to file and saves it.
In the report I have an Image object (a logo) that is in the header.
When I print the report to a printer or a PDF printer the image is present.
When I use DoCmd.OutputTo the report is properly exported to PDF and saved but the image is not present.
I've tried playing with the ExportQuality, the "fit to page", etc... but nothing seems to get it working.
here is the vba I use
'Open the report as hidden to filter the data
DoCmd.OpenReport reportToExport, acViewPreview, , filterReportBy, acHidden
'if we show the report
If (booSeeFile) Then
'export to pdf to save and autostart
DoCmd.OutputTo acOutputReport, reportToExport, acFormatPDF, filepath, vbYes
Else
'export to pdf to save
DoCmd.OutputTo acOutputReport, reportToExport, acFormatPDF, filepath
End If
Any help would be great !

given that you've gone 12 hours with no reply; I generally don't have any problem with the logo going from the Report object to the PDF export. When a report is opened on screen - right click - and one of the choices is 'Export To' and one of those
choices is 'PDF or XPS' - - - just try that as a sanity check....
there are 2 kinds of image controls - I can't remember off hand their formal name but one has the image embedded permanently inside the report object and so this one should go to the PDF.....the other type is a file link to the image for which the advantage
is that image can be dynamically changed on the fly. This second type probably will not appear in an export as the file link is probably broken....
hope this helps a little......

Crystal Report Viewer Error: Could not render the page

Hi,
I was facing the same issues whereby i creating my crystal report in VS2005 profesional built in crystal report designer. When preview in VS2005 the graph displayed correctly. However, when export to IIS it shows the error could not render the page.
I am using Windows 2008 server, IIS7.
I tried to install the CRREDIST x86.msi into my server, however it still could not show out the graph (pie chart) in the localhost.
Appreciated anyone know this could kindly advice.
thanks.
ck

Hello,
Crystal Reports 10 is not supported on Windows 2008 Server.
Please view the information [here|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Upgrade the Crystal Reports.
Thanks,
Bhushan.

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

Crystal Reports 2010 SP1 on IIS 7.0 - Report is not being displayed

Hi,
Finally, the keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll error is gone, after I installed Crystal Runtime 2010 SP1. Also, I tested Crystal Report 2010 SP1 on my Windows 32 application and I can tell that I do not have this error anymore and report is being displayed properly.
But Crystal Report is not being displayed on ASP.NET page on MS Server 2008 standard edition SP2 with IIS 7.0. Database resides on iSeries remote machine.
The MS Server 2008 is virtual machine.
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
Simply the report is not being displayed at all. No errors are being recorded in the Event Viewer.
Nothing happens; excerpt the page is Loadingu2026 and Waiting for u2018website nameu2019 in the left lower corner of Firefox web browser.
Here is the code behind aspx page with a command button - very simple:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
protected void Button1_Click(object sender, EventArgs e)
ReportDocument crReportDocument;
Database crDatabase;
Tables crTables;
// CrystalDecisions.CrystalReports.Engine.Table crTable;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo crConnectionInfo;
crConnectionInfo = new ConnectionInfo();
//Set server name
crConnectionInfo.ServerName = this._strServerName;
//set database name
crConnectionInfo.DatabaseName = this._strDatabaseName;
crConnectionInfo.UserID = this._strUserID;
crConnectionInfo.Password = this._strUserPassword;
//Set integrated security
crConnectionInfo.IntegratedSecurity = false;
crReportDocument = new ReportDocument();
crReportDocument.Load(Server.MapPath("~/crystal-reports/TransformerLoad/TransLoadMonthlyMax.rpt"));
crDatabase = crReportDocument.Database;
//Set all tables from current report file
crTables = crReportDocument.Database.Tables;
//crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
//Apply schema name to the table's location
foreach (CrystalDecisions.CrystalReports.Engine.Table _crTable in crTables)
crTableLogOnInfo = _crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
_crTable.ApplyLogOnInfo(crTableLogOnInfo);
//Check if database table name starts
if (_crTable.Location.StartsWith("XFMRSMAX", StringComparison.CurrentCulture) ||
_crTable.Location.StartsWith("XFMRSMIN", StringComparison.CurrentCulture))
//_crTable.Location = this._strSchemaName + "." + _crTable.Location.Remove(8) + Convert.ToInt32(Request.QueryString\"ReportYear\");
_crTable.Location = "XFMRSMAX09";
else
_crTable.Location = _crTable.Location;
this.CrystalReportViewer1.ReportSource = crReportDocument;
This code runs on my development machine Win XP SP3
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
This code also runs on another development server - Windows XP SP3 (IIS 5.1)
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
ispnet_client folder has IUSR user and this user has read permissions to this folder. I even tried to change the permissions to Read & Execute.
I am developing my reports using Crystal Reports 2008 SP2.
Any help would be greatly appreciated.
Serghei

Hi Ludek,
Thank you for your response.
I checked the web.config file, all http handlers are there. I think the handlers are required to render the images on crystal report viewer but in my case the report viewer is not being rendered.
I have to questions:
1. What exact folders should be under aspnet_client\system_web?
In my case I have structure like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13
aspnet_client\system_web\4_0_30319\crystalreportviewers13
Should I have folders something like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13_1
aspnet_client\system_web\4_0_30319\crystalreportviewers13_1
after I installed Crystal Reports 2010 SP1
Also, in C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET 4.0\Common\Crystal Reports 2011\ there is no folder named as crystalreportviewers13 but instead crystalreportviewers
a.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13, or
b.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13 and rename this folder to
crystalreportviewers
2. Can you explain how to get a data report?
This is the quote from your previous answer
I'd be interested to see this simplified to a saved data report - no DB logon code - as a test...
Thank you Serghei

"Submit "buttons on forms in various websites do not render in 18.0.1 but render in other browsers.

After 18.0.1 was released forms in our inhouse applications and some external websites "submit" button does not render.
- Buttons render correctly in current versions of other browsers IE,Chrome, Opera.
- Latest release of Java installed.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

CR XI R 2 and CR 2008 does not render Khmer Unicode correctly

Post Author: khmerangkor
CA Forum: General
Having evaluate CR XI R 2 and CR 2008 in Visual Studio 2005 and Visual Studio 2008. The result:When I work with Crystal
Report Application itself is fully supporting the Khmer Unicode. Then
I include it into VS 2005 and 2008, it does not support Khmer Unicode at all. Basically, it does not render at all. Hope Crystal Report Development Team look into this problem and help us to develop report in Khmer Unicode. We belive in your product.Regards,Khmer

Don,
the problem seem to be that Version XI Rel 2 is not only an Upgrade of Version XI (for what I just purchased a license) but a special Version.
So I have the Trial Version XI Rel 2 and my Reg. Key does not comply with it.
I Think SAP ony gives the user the right to use Version XI Rel 2 I you buy a full Version (even if you are Crystal reports Customer for 15 years).
Very diffuse and time wasting the whole thing. I hope my old projects still using Crystal reports will soon run out of use.
Cheers for your efforts
Miko

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Could not render the database. Not enough memory.

This seems to be a big bug in Fireworks CS4. I am building a 10 page website. I only had the opportunity to insert about 10 high quality images into the project, and then tried saving the project as a Fireworks PNG. It appeared to Save successfully, however from that point on, any object I would click on, any layer I would select a message would appear.
"Could not render the database. Not enough memory."
Has anyone seen this before? How can I fix this?
I tried doing a workaround. I tried opening the saved file from Fireworks CS3. Before opening, it displays a message about insufficient permission in the registry. I click OK, and it opens in CS3. I can finally edit the project and make changes, and save it without problems. However, even after saving in CS3, I cannot open it in CS4 without getting the error message. It is not only on my machine. I send my project to others to see if they can open it via CS4, and they can't either. They get the same message.
I attached the PNG file, this is for a school project.
Any help is most appreciated.

I'm relieved to hear that. So I trust that your images are all nice and small, file-size-wise.
Okay! I trust you have already defragged your hard drive and turned off all those nasty TSRs that eat up your RAM. Fileswapping is usually what slows my computer down.
Check for scripts that might be running wild in the background. Can't think what they might be, but if something is looping and shouldn't be, you'll end up with less free RAM to move around in.
I haven't noticed the problem with lots of layers, but I haven't been watching, either. Have you experimented with turning off the layers that you are not actually exporting? I understand the convenience in keeping all those layers in there...it's a big timesaver in editing throughout a project. If all the layers are not needed in the image export, however, turn them off temporarily. That might save some elbow room.
It sounds as if your system fits the basics, but you might check:
Windows
1GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Mac OS
PowerPC® G5 or multicore Intel® processor
Mac OS X v10.4.11–10.5.4
512MB of RAM (1GB recommended)
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024x768 display (1,280x800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Rather than jumping to think it's a bug, try a test with 9 layers, or 8 layers. If only 10 layers and up provide problems, file a bug/feature report or contact someone in support.
As this is a user forum, we (other users) neither speak for Adobe nor know everything about the applications from a support viewpoint, so while we're always willing to offer opinions and frequently solutions, real bugs are not in our bailiwick.
Perhaps someone with a multi-layer difficulty can chime in here.
Beth

Report is not getting displayed in ESS (ITS version)

Hi ,
I often create reports in ABAP HR and display them in ESS (ITS) .
But this time , report is not displaying the contents of internal table .I have first time used BAPIs to pass the values to internal table .
Is it the reason ??
Please help me in ths regard how can I make my report displayed in ESS.

Please make your transaction code as easy web transaction form SE93 and then try.

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Report is not getting filtered

i created a date between prompt , and filters and selected as filter is prompted but while i selecting the date range in dashboard its report is not geting filtered.

Hi Saket,
check whether the particular column is prompted in the report....
Refer : http://obieeone.com/2010/03/04/lessons-in-filters-and-the-is-prompted-operator/
Thanks
Aravind

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Web Analytics reports and not showing data

Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
reasons: (1) Web Analytics has not been enabled long enough to generate data;
(2) There is insufficient data to generate this report; (3) Data logging
required for this report might not be enabled; (4) Data aggregation might not be
enabled at the level required for this report."
I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
rani

Hi Rani,
The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
Please enable this timer job and run the timer job to see how it works.
More reference about this error:
https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

AP Account Analysis Report USD not converting to Functional Currency

When I am running AccountAnalysis Report , USD not converting to SGD\
08-JUN-09 3D NETWORKS SINGAPORE PTE TI10050729 Invoice Nonrecoverable GST Yes
USD 8,395.36 8,395.36 530000844
Regards,
Ajit
Edited by: Ajit Raut on Jul 27, 2009 8:10 PM

Resolved,
==============================================
Please find below notes;
Not all reports are appropriate to run under MRC responsibility.
The reports that do not have set of books as parameter cannot show thedata in reporting currency as
sob is not supplied. So all such reportsnot having set of books parameter cannot be expected to show
the outputin reporting currency.
Refr to the document "Multiple Reporting Currencies in Oracle Applications"
Appendix A: MRC Reporting Responsibilities:
Section Request Groups (page A-8)
Extract from the document:
The predefined MRC request groups allow you to access only those reports
and programs that are "appropriate" to run when using a reporting responsibility.
Pre–defined MRC request groups are in the format MRC Programs <product code>.
Payables
=======
The following reports are available in the MRC Programs AP request group:
• Accounts Payable Trial Balance Report
• Posted Invoice Register
• Posted Payment Register
• Posting Hold Report
• Transaction Reconciliation Report
• Journal with GL Details Report

Reports do not render in IE 11

Similar Messages

Maybe you are looking for