Reports do not run properly

Hello,
I am using Report Builder 3.5, the problem is this that i have to compile reports very often although there are no changes in reports but report dont run. Same report runs after compiling it. If anyone of you can help me out Plz mail me or reply to this message.
Thanks

Hi,
Actually the system is final and running on client site, the client says that after compiling the report, it runs fine in morning and then after some time same report dont run. There are no changes in database neither the report as the system in installed and its final. I am unable to find the reason, the only solution is to recompile it.
Bye
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by sudhir humnabadkar ([email protected]):
Hi
Are you using any other sql statements in any formula columns / triggers , in which case they will be marked as uncompiled when you open the report without connecting to database . If you dont want this error , first connect to database and then open the report ... you should not get this error
if this is not what you are looking for , can you explain in more detail
bye
sudhir<HR></BLOCKQUOTE>
null

Similar Messages

FOR ALL ENTRIES stmnt. in SELECT query is not running properly

Hello experts,
          In my report program, I write one query on table BSIS.
         Internal table declaration -
       DATA : BEGIN OF DLC_BSIS OCCURS 0,
                        BUKRS LIKE BSIS-BUKRS,
                        GJAHR LIKE BSIS-GJAHR,
                        BELNR LIKE BSIS-BELNR,
                        SHKZG LIKE BSIS-SHKZG,
                        BSCHL LIKE BSIS-BSCHL,
                        AUFNR LIKE BSIS-AUFNR,
                        HKONT LIKE BSIS-HKONT,
                        QSSKZ LIKE BSIS-QSSKZ,
                        DMBTR LIKE BSIS-DMBTR,
                   END OF DLC_BSIS.
Query as follows --
         SELECT BUKRS
                       GJAHR
                       BELNR
                       AHKZG
                       BSCHL
                       AUFNR
                       HKONT
                       QSSKZ
                        DMBTR FROM BSIS
                                  INTO TABLE DLC_BSIS
                                 FOR ALL ENTRIES IN IT_BKPF2
                                 WHERE BELNR = IT_BKPF2-BELNR
                                              AND BUKRS = IT_BKPF2-BUKRS
                                              AND GJAHR = IT_BKPF2-GJAHR.
IT_BKPF2 internal table having -- BUKRS - LT01
                                                     BELNR - 6400000061
                                                     GJAHR - 2009.
And in BSIS database table -- 3 entries are there for the above documnet.
But, in my internal only one entry has come for the same above document.
I think For all entries stmnt. is not running properly. But Why it's not running properly.??
What would be the reason..??
Thanks in advance....!!
Regards,
Poonam.

>
Poonam Patil wrote:
> Hello experts,
>           In my report program, I write one query on table BSIS.
>
>          Internal table declaration -
>
>        DATA : BEGIN OF DLC_BSIS OCCURS 0,
>                         BUKRS LIKE BSIS-BUKRS,
>                         GJAHR LIKE BSIS-GJAHR,
>                         BELNR LIKE BSIS-BELNR,
>                         SHKZG LIKE BSIS-SHKZG,
>                         BSCHL LIKE BSIS-BSCHL,
>                         AUFNR LIKE BSIS-AUFNR,
>                         HKONT LIKE BSIS-HKONT,
>                         QSSKZ LIKE BSIS-QSSKZ,
>                         DMBTR LIKE BSIS-DMBTR,
>                    END OF DLC_BSIS.
>
>          Query as follows --
>
>          SELECT BUKRS
>                        GJAHR
>                        BELNR
>                        AHKZG
>                        BSCHL
>                        AUFNR
>                        HKONT
>                        QSSKZ
>                         DMBTR FROM BSIS
>                                   INTO TABLE DLC_BSIS
>                                  FOR ALL ENTRIES IN IT_BKPF2
>                                  WHERE BELNR = IT_BKPF2-BELNR
>                                               AND BUKRS = IT_BKPF2-BUKRS
>                                               AND GJAHR = IT_BKPF2-GJAHR.
>
> IT_BKPF2 internal table having -- BUKRS - LT01
>                                                      BELNR - 6400000061
>                                                      GJAHR - 2009.
>
> And in BSIS database table -- 3 entries are there for the above documnet.
>
> But, in my internal only one entry has come for the same above document.
>
> I think For all entries stmnt. is not running properly. But Why it's not running properly.??
> What would be the reason..??
>
>
> Thanks in advance....!!
>
> Regards,
> Poonam.
include the buzei field in selection criteria i have faced the same situation earlier.
always select all the key fields.
varun

Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
Please send me the solution on urgent.
Thanks.
Shahzad

Hi Paul,
We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
The command for SQL Server 2012 is:
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
folders>
DTS
SDK
Tools
srkr

Gimp will not run properly

I just purchased a 24 inch Imac and Gimp will not run properly. I have the latest system updates and firmware. Gimp starts X11 and appears to load, but the only item visible is the Gimp menu, none of the tools. It shows as running in the dock.
If I try to open a graphic with Gimp, it loads but the graphic is not visible and only the Gimp menu is visible in the menu bar. It shows up as running in the dock.
It works fine on a G4 quicksilver. I have the latest version 2.2.11
Thanks,
Fran
IMAG INTEL Mac OS X (10.4)

Hello Francis,
Did Gimp ever load properly? On first load, it should have gone through an installer within X11. Also, I've noticed that my image windows start up hidden. There also may be a bug in which clicking on the Gimp app icon in the dock itself won't bring the windows forward, so you have to use the X11 icon instead. Try using Expose to show all windows in all applications to see if they've opened but sort of "off-screen."
It could be a bad installation, or it could be that somehow the toolbars and palettes, etc. in Gimp just never appeared. Check to make sure X11 is up to date as well. I'm currently running 1.1.3 with XFree86 4.4.0.

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just g

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?

Use the download version:
Download CS3 products
Mylenium

Captivate project not running properly on iPad

Hello,
I built a project using Captivate 7.0. When I published the project, I checked both the SWF and HTML5 boxes so the tutorial would run on an iPad. However, when I view the tutorial on the iPad, the tutorial does not run properly. The pages do not advance (even though, in Captivate, I have the slides advancing automatically - not on mouse clicks), all of the bullets on a slide do not appear, and the narration stops in the middle of a slide and does not resume.
Do you have any suggestions?
Thank you,
Sarah

Hi Joel,
I removed all bullet animations and re-published the project (I checked the "Force re-publish all the slides"). My tutorial runs on an iPad, without the slides hanging up. It appears removing the bullet annimations solved that issue. Thanks for the suggestion.
However, neither my music introduction on the first slide nor my narration on subsequent slides comes in. I confirmed I do not have "mute" on and that my volume is up. Also, I confirmed the sound works by running the tutorial on my desktop.
Do you have any ideas?
Thanks,
Sarah

Vz protect not running properly

I have the latest version, but it is not running properly (just keeps scanning).
How can I fix this? Should I uninstall and then reinstall? Is there a charge to do that?

hello lhill123, maybe that's an issue with hardware acceleration - first please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.

I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.

YOU CAN'T.
If you upgrade your phone you can only upgrade to iOS 7 and that is it. You can only ever update to the lastest available software, which in this case is iOS 7. You either upgrade to this or not at all because you can't upgrade to anything else.

I defined custom action but it is not running properly.

Hi,
I defined custom action but it is not running properly.
I deployed in MII (System Management --> Custom Actions)
When i use it as an action in a transaction error below generated.
Errors
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
Custom action code is below.
package com.wipro.action;
import com.sap.xmii.xacute.actions.ActionReflectionBase;
import com.sap.xmii.xacute.core.ILog;
import com.sap.xmii.xacute.core.Transaction;
@author cemil.bozlagan
public class CustomAction extends ActionReflectionBase {
    private String strFirstInput;
    private String strSecondInput;
    private String strOutString;
    public CustomAction() {
        strFirstInput = "";
        strSecondInput = "";
        strOutString = "";
    @Override
    public String GetIconPath() {
        return "/com/wipro/action/resources/icons/CustomAction.png";
    @Override
    public void Invoke(Transaction trx, ILog ilog) {
        try {
            strOutString = strFirstInput + strSecondInput;
            // This varaible is defined in ActionReflectionBase class
            _success = true;
        } catch (Exception e) {
            _success = false;
    public String getFirstInput() {
        return strFirstInput;
    public void setFirstInput(String strFirstInput) {
        this.strFirstInput = strFirstInput;
    public String getSecondInput() {
        return strSecondInput;
    public void setSecondInput(String strSecondInput) {
        this.strSecondInput = strSecondInput;
    public String getOutString() {
        return strOutString;
    @Override
    public boolean isConfigurable() {
        return false;
How can i solve this problem?
Thanks.

Hi Cemil,
Pls check document, I hv sent to your mail.
May be it helps.
Regards
Padma

Javascript does not run properly in Firefox

Firefox does not run javascript properly.
For example:
http://vk.com/app2622342_40916334#NEW/comp1427
Comment form does not run at all in Firefox ( the last version = 20.0.1)
but runs OK in Opera.
WHY?
Mozilla still is HALF-DONE SOFTWARE!!!!!!!
WHEN YOU DO IT IN A GOOD WAY?

I have javazcript-enabled = TRUE in my about:config. So your comment did not solve my problem. I noticed that javascript does not run properly in some websites (forms in vk.com) but those forms run OK in OPERA - how can you explain this!?
And I have no errors in the Web Console (Firefox/Tools > Web Developer).
I wrote you a link to the page where javascript does not work.
( you need to login to vk.com to see that page
http://vk.com/app2622342_40916334#NEW/comp1427
)

'Mail" not running properly

After updating to Lion (10.7.2), "Mail" will not run properly. For each of my accounts, either the incoming or outgoing servers go offline, and while I can access incoming mail (sometimes), outgoing is impossible. I have deleted and reinstalled all of my accounts. Doesn't help.
Anyone else having issues?

WHOA!!!!! meant to say "After installing LION...."!!!
Sorry.....

[svn:bz-trunk] 13744: Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)

Revision: 13744
Revision: 13744
Author:   [email protected]
Date:     2010-01-25 01:14:09 -0800 (Mon, 25 Jan 2010)
Log Message:
Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)
QA: No
Doc: No
Checkintests: Pass
Details:
-Don't start the server before unit task, unit task already checks if the server is not running and starts the server.
-Don't stop the server after FlexUnit tests, JUnit tests need the server running, and they will stop the server after they are done.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-481
Modified Paths:
    blazeds/trunk/build.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml

Tony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Reports are not run when connect VPN

I have installed Oracle Forms & Report Services (Standalone) on windowXP (SP-3). My problem is:-
1) After restart OS i connect VPN when VPN is properly connected i run my application. Forms run properly but when i want to run report it shows error 'rep-51002: Bind to report server rep_localhost_bs_appsrv failed'.
2) After restart OS i did not connect VPN and then run reports its running properly and not showing any error.
I want the solution of 1st case. Please help me urgent.

You need to put the IP address in the hosts file.
Also verify if your Default Gateway at networking level is configured for the NIC. The Default Gateway information could be displayed executing 'netstat -anr'.
Also check the network through nslookup.
Is http service is running?
How many network adapters are there?
Has IP address changed?
What's your operating system?
Also don't say urgent in your questions, because urgent questions are answered by the paid support.
regards

SCCM Reports Will Not Run - SQL Connection Issue

We have SCCM 2012 R2 CU2 and SQL 2012 SP1 CU6. We used to build our SCCM suites with SQL on the site server and have never had this problem that we now have on a new suite but this time we hosted SQL on its own server (SQ01) separate from the site server.
SCCM made the SQL server a component server (makes sense) and forced us to put Reporting Services on the SQL server (when trying to put it on the site server it would not find the instance-CM01, as that one has SSRS on it). The site server is ABC01. We've
already fixed a couple errors in regards to this issue.
The Reporting Services installed on SQ01 fine. When you go to reports in admin console it loads the 419 default SCCM reports just fine. But none of them will run properly. They open up but a popup appears with this error in the error details popup:
"An error has occurred during report processing....AbortedException: An error has occurred during report processing...ReportProcessingException: Cannot create a connection to data source AutoGen__(many numbers). System exception..."
If you go to SQ01, open Reporting Services Config Mgr, connect to instance SC01, click the URL under Report Manager URL, it prompts you for a logon (but should not do so) and you can log in with the service account selected when the Reporting services were
installed in SCCM Admin Console, drill down into ConfigMgr_ABC, click on the default created data source named {bunch of numbers}, and herein there are two more problems....1) it doesn't save the pwd for the service account, when clicking test connection we
often have to reenter it, and 2) the ConnectionString has this entry for Source="ABC01.fqdn/CM01" but it will never connect with that. If we change it to just "CM01" and it is currently holding the pwd, it will test connect successfully
but after just a few minutes it won't because something has reset the connection to "ABC01.fqdn/CM01" and forgotten the pwd. It is apparent that something is overwriting the settings in a way SQL currently doesn't like.
Also, we have an alias within SQL in this format "SQ01.fqn/CM01" when SQL already has a "CM01" alias. This seems to be a problem too.
Any input appreciated.
Ben JohnsonWY

OK, I'm duly web-embarrassed. Apparently due to some firewall blockage, my Admin Console on my workstation (which is in a different VLAN from these servers), could not save the changed Reporting Services configs to SQL. When we made the changes using the
Admin Console on ABC01, it all started working.
Ben JohnsonWY

Reports do not run properly

Similar Messages

Maybe you are looking for