Reports Encounter Problem & Close

HI !
--Mostly i encounter problem in Reports 6i (.rdf & .rpt) bot applications.
-- Often this message appears:
"Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience."
--And in the Report Builder, when i move horizontal/vertical bars fastly, the said problem occur.
I willl be very thanksful for kind suggestions.
Thanks!

It may occur if you use Mouse Wheel button for scrolling in report layout editor. Avoid using mouse wheel to scroll.... use the scroll bars only.

Similar Messages

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

Internet explorer encountered problem and needs to close

Hi
Please resolve my problem
wile i m accessing portal suddenly i m getting the pop-up error saying
"Internet explorer encountered problem and needs to close. we are sorry for the inconvenience"
when i click click here link on that pop-up, again another pop-up displaying with the following details.
AppName: iexplorer.exe AppVersion: 6.0.2900.2810 ModName:mshtml.dll
My collegues suggeted it is due to the problem with IE. But im using IE6.0 SP2 only.
i m not getting this error wile accessing other sites with IE. y with mySAP only this error i m facing.
please resolve and give me the proper solution to work with my SAP portal.
Thanks in Advance.
Venkat.....

Hi venkat.,
Go Tools->Pop-up Blocker->
here u should allow ur pop-up for portal,.. so u should Turn off ur Pop-up Blocker
other wise instal any google tool bar to ur IE it will allow ur popup for portal..
Points are wellcome if useful..
Thanks By.,
Boopalan..

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

"Lightroom has encountered problems reading this photo."

***** UPDATE July 17, 2013 @ 9:16 am Central Time (UTC -06:00)*****
After Creating a fresh catalog I have been able to clarify the issue a bit. This error appears to only show up in Folders exported as Catalogs. Particularly when I try and open that exported catalog.
I suspect there is a problem with the way Lightroom 5 is exporting these catalogs. I didn't have this issue with LR4.4, but it shows up any time I export a folder as a catalog within LR5, regardless of whether or not it is exported from an upgraded catalog or a fressly created catalog.
It looks like fixing the problem is going to be time consuming, but not impossible. So far I have confirmed that these files - reported as throwing this error by Lightroom 5 ("Lightroom has encountered problems reading this photo .... You will not be able to make adjustment to this photo.") - can be imported into a new/existing catalog by multiple methods without carrying over the errors displayed in the exported catalog.
This is frustrating and adds additional steps to my workflow, but isn't undoable. Of course it would be nice if LR5 worked as correctly and exported folders as catalogs without throwing errors when those new catalogs were opened...
Is anyone else seeing this problem when they open catalogs created by "exporting a folder as a catalog"?
***** Original Post *****
I'm really confused. I am consistently getting this message on certain exports, but not others...
When it happens:
1) "Export this Folder as a Catalog" from a specific folder within my Working Catalog
Select the location
Select "Export negative files"
When I open the NEW Catalog - ALL the photos reflect this error message: "Lightroom has encountered problems reading this photo .... You will not be able to make adjustment to this photo."
When I go to the Develop tab it displays "There was an error working with the photo" over the photo, but I can edit it... When I close the catalog and re-open it, the changes don't reflect UNTIL I go back to the Develop tab, then the thumbnail will reflect the change. But the system still insists that it has a problem with the file...
2) The same thing happens when I export the file from my Working Catalog as an image of the same format - be it tif, dng, or psd, or RAW files. Not sure what I was refering to here (can't duplicate today - July 17).
When it doesn't happen:
When I export the file to the auto import folder for my Portfolio catalog (original format). This seems to work...
Why am I so confused? Because all of these catalogs are located on the same drive (which is different than the drive my Working Catalog is on). When they are auto imported to my Portfolio catalog they seem to work, but everything else throws an error sinse I upgraded to LR5!
My System:
Windows 7 Pro SP1 (fully up to date) 64-bit
Intel Core i7 CPU 950 @ 3.07GHz
Installed RAM: 12.0 GB
My Lightroom 5 Working Catalog doesn't seem to be having any problems...
This problem is frustrating enough that I may go back to LR4. I can't have my archived files compromised...

Suggestion to all who encounter problems like this: if you've installed 3rd party memory cards (ram), go back to your original ram, or at least the brand of ram that your computuer came with.
Long story, short:
I had the same error message in LR5. It only happened with several images in a given import. If I deleted all of the images from the import and reimported the images, a different set of images would have the error message. The images that originally had the message would no longer have the problem. I deleted and reimported several times while observing the same behavior.
Not only did lightroom give me issues, but Bridge had problems reading the files, and the previews of the problem images would not show up in Finder (Mac speak). This ruled out, to me at least, that it was a software issue. I went out and purchased a new card reader and had the same problems. I tried a different card with different images and got the same problems.
After I contacted Adobe, they had me upload two files with the error, and they said the files were corrupted due to faulty hardware. I took my mac book pro (13in early 2011 w/ 10.7.5) to the apple store and they ran a diagnostic test amoung other test and we came up with nothing. Everything seemed to be good on the hardware side. After some research the Rep. asked me about my ram (memory cards). I had in the past installed two 3rd party cards to boost my ram from 4GB to 8GB. The rep. suggested that I go home and test the issue with the original ram my computer came with before we go any farther. So far, I haven't had any issues.
I hope this helps,
Josef

How can I report a problem with downloading?

I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
Any other places to report a problem? Or advice onto how to get the missing songs?
Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

Click here and fill out the form for assistance.
(35548)

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

My firefox always opens a crash report when I close it. Even if I have no tabs open and close firefox.

The Crash information is:
AdapterDeviceID: 95c4
AdapterVendorID: 1002
Add-ons: TFToolbarX@torrent-finder:1.2.6,{1de0de3c-0b5c-4f67-90c6-689623894991}:0.3,{9fb7d178-155a-4318-9173-1a8eaaea7fe4}:2.1.11,{B17C1C5A-04B1-11DB-9804-B622A1EF5492}:1.2.1,{c0c9a2c7-2e5c-4447-bc53-97718bc91e1b}:5.4,{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}:1.3.9,{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}:0.9.8,{ef4e370e-d9f0-4e00-b93e-a4f274cfdd5a}:1.4.4,{b9db16a4-6edc-47ec-a1f4-b86292ed211d}:4.9.5,[email protected]:4.0.2,{1E73965B-8B48-48be-9C8D-68B920ABC1C4}:10.0.0.1410,avg@igeared:7.008.031.001,[email protected]:1.3.5
AvailableVirtualMemory: 3804364800
BuildID: 20110902133214
CrashTime: 1316851060
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1315413340
Notes: AdapterVendorID: 1002, AdapterDeviceID: 95c4, AdapterDriverVersion: 8.872.0.0
D2D? D2D+
DWrite? DWrite+
D3D10 Layers? D3D10 Layers+
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 452
StartupTime: 1316850895
SystemMemoryUsePercentage: 78
Theme: LavaFox_V1-Blue
Throttleable: 1
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d2&search=My+firefox+always+opens+a+crash+report+when+I+close+it.+Even+if+I+have+no+tabs+open+and+close+firefox.&showform=1
Vendor: Mozilla
Version: 6.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
This report also contains technical information about the state of the application when it crashed.

Have a read of the rather complicated article
* [[firefox crashes]]
* and for anyone with firefox crashing before you can key in about:crashes see: http://kb.mozillazine.org/Breakpad#Location_of_crash_reports
I note you have found bp-54df2ba6-de52-405d-9ccc-4dd272110924 have you any other recent crash signatures or crash IDs, the one you provide seems rather uncommon [https://crash-stats.mozilla.com/report/list?product=Firefox&query_search=signature&query_type=exact&query=karasx2.dll%400x2535&reason_type=contains&date=09%2F24%2F2011%2001%3A44%3A07&range_value=1&range_unit=weeks&hang_type=any&process_type=any&do_query=1&signature=karasx2.dll%400x2535 [karasx2.dll%400x2535]]
Do you still get the problem in [[safe mode]] and with default themes, and all plugins disabled. Note common causes of crashes are malware, and versions of the software IDvault. (do you use IDvault ? - often provided by Comcast)

Report on Opportunity Close Date Changes

I would like to create a report showing all deals that have had changes made to the Close Date. I am trying to create it from the Pipeline History section of the Analytics, but I am not sure which fields I can use, if any.
Any suggestions?

That is a very creative solution, Dale. I do have a couple of "what ifs" for you.
What if the Close Date is 10/30/2007... I change this to 10/15/2007 - a change of -15 days. Then I realize that I meant to change it to 11/15/2007 and changed it again. Would this create a problem for the report since the change amount would now show a 30-day change when it is really a 15-day change?
Another scenario has the date change twice in one week, between times that the report is run. The original date of 10/30/07 changes to 11/15/07 and then the next day changes to 12/15/07. How does this affect the report?
When we get to the point that the audit trail becomes reportable, this problem is solved. Until then, it is quite the puzzle. I think your solution potentially solves part of the problem, but depending on how much that date field actually changes and how often you run your report and which fields are needed in that report, it could return misleading data as well.
This is a very interesting problem. Dale has come closest to a solution so far. Any other suggestions for DavidG? I am drawing a blank on it so far.

Report on Opportunity Close date forecast Quarters

Hi,
we have created a custom report with fields from the Forecast section in Reporting including the Opportunity close date, and under the 'Close Date' we have put the Fiscal Quarter. However it is coming out wrong in some cases, so i added the 'Date' under the Close date section and not the opportunity section and it is different to the Close date on the opportunity. Can someone tell me what this 'Date' refers to?
Thank you

That is a very creative solution, Dale. I do have a couple of "what ifs" for you.
What if the Close Date is 10/30/2007... I change this to 10/15/2007 - a change of -15 days. Then I realize that I meant to change it to 11/15/2007 and changed it again. Would this create a problem for the report since the change amount would now show a 30-day change when it is really a 15-day change?
Another scenario has the date change twice in one week, between times that the report is run. The original date of 10/30/07 changes to 11/15/07 and then the next day changes to 12/15/07. How does this affect the report?
When we get to the point that the audit trail becomes reportable, this problem is solved. Until then, it is quite the puzzle. I think your solution potentially solves part of the problem, but depending on how much that date field actually changes and how often you run your report and which fields are needed in that report, it could return misleading data as well.
This is a very interesting problem. Dale has come closest to a solution so far. Any other suggestions for DavidG? I am drawing a blank on it so far.

Why in the world is it that everytime I attempt to report a problem with The TV Show "The Walking Dead Season 2 episode 1" I tunes redirects me to their main page..***.. I just want to watch this show. I'm deployed

Why in the world is it that everytime I attempt to report a problem with The TV Show "The Walking Dead Season 2 episode 1" Itunes redirects me to their main page..**

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Tracing report execution Problem

I am trying to trace report execution which gives me some problems!!!
First i tried to use report builder (via tools --> trace option) to add tracing options and then when i executed the report using View--> Runtime Priview it does not produce the trace file. This works if i am using Live Previewer instead of Runtime Preview.
But what i need is the trace file of runtime Previewer as it is giving me some problem.
If i programatically do it using report triggers using SRW built-in packages then the report builder itself closes and says RWBLD60 has generated an Error. Since my report is very complex i need the help of report tracing to confirm the flow and execution. Please can somebody shed some light into this problem....
It will be great if anyone tell me how to do it!!!!!.
i am using Windows 2000 & Reports 6i (6.0.8.11.3). IS THIS A BUG IN REPORTS 6i????
Thanks
Mahesh Mathew

The first thing I would do if I were you would be to upgrade to the latest patch version (we're up to about 6.0.8.23 now).
If you're still having problems with tracing you could contact support, or workaround by testing the report with rwrun60 and adding the tracing options on the command line.
Regards,
Danny

Encountered Problem in Microsoft Word

Dear all,
I would like to seek for your advice regarding the following issue.
I have encountered problem in Microsoft Word when I used/clicked on bullet point; or even if I opened files that contain bullet point. The error message is, " Microsoft Word has encountered a problem and needs to close. We are sorry for the inconvenience."
I am using OS Mavericks. Please kindly assist me as I need to do my projects, which are due in a month time.
Thanks.
Sincerely

You haven't typed a return at the end of each line.
Paragraph styling unsurprisingly applies to the entire paragraph.
Peter

Error message: Installation encountered problems, please try redownloading.

Hi,
just tried to update the Flash Player to the newest version. However, the installers provided at this site (http://get.adobe.com/de/flashplayer) seem to work improperly. On my 64-bit Win 7 Pro system all works fine, but on my laptop (32-bit Win 7 Pro) it keeps saying "Installation encountered problems. An error occured. Close this window and start download again." This happens with both the Firefox and IE installer.
I managed to update FP with the offline installers, but I'm interested in the reason anyway. Is it a broken installer, is it a configuration problem of my laptop, or is it another problem? Would be very happy if anyone knows about this issue!
Thanks

Usually, it's a firewall problem with the "downloader/installer". I always use the offline installers to avoid any bundled software.

EVDRE error "encountered problem when retrieving data from webserver"

Hi,
in a EVDRE we always get the error "encountered problem when retrieving data from webserver"
When analysing this further we noticed this is always generated when a base member is selected in the CV and the expansion on the row for this dimension is has one of the following expansion settings:
DEP
ALL
NOEXPAND
if we select SELF, the error disappears again and the EVDRE works fine again ... is this normal behavior?
there is no problem with application nor dimension.
D
solved it

Note that the keyword "ALL" does not include the member itself. This may cause some confusion, but as Harish implies, when you select a base member it finds no matches if your memberset is "ALL".
If you want to design a report to handle the user moving back and forth between base and non-base members in their CV, you either need to include SELF,ALL or SELF,DEP, or something similar....
OR you need to get a little fancier, and use EVPRO to look and see if the CV member is base -- evpro(app,member,"CALC") -- and then use some conditional logic in Excel to choose the correct expansion options. If Calc=N, use Self, otherwise use SELF,DEP or whatever you choose. This can be a bit tricky if you then want the user to be able to drill down in the report (especially if you want the workbook option to insert add'l rows on the expansion, rather than replace), but it's all possible.

Reports Encounter Problem & Close

Similar Messages

Maybe you are looking for