Reports engine doesnt start automatically

Hello,
I install weblogic 10.3.3 with forms&reports 11.1.1.3 and I have the following issue.
When the weblogic starts, the reports engine (RWENG) doesn't star automatically to print the reports. To be able to print the first report I need to manually open the "/reports/rwservlet/showjobs?jobname" site or press the "start in-process button".
I already tried to define the" minEngine=1, initEngine=1 and maxEngine=5" but the issue persists.
Can anyone help me out? How can I start the reports engine automatically, so I dont need to open the URL or press the button every time the weblogic starts?
Thank you.

MrWeatherbee wrote:
x-tra wrote:i cant believe that i forgot t select gnome session from the gdm screen that is i couldnt see any gnome!!!!:lol:
Yea. Based on your first post:
x-tra wrote:Although i am able to login at gdm, what i am getting next is an x-session with 3 terminal windows.
it seemed to me that you were successfully getting to GDM login but just were not getting to your gnome session, so that's why I didn't go into great detail about setting up GDM and just suggested using a different init file (~/.gnomerc in this case).
But, basically, you were choosing the wrong session at GDM, and once you selected Gnome, you were good to go, is that correct?
Anyway, back to dbus-launch ... any background on why you chose this methodology over putting dbus in the rc.conf daemons? I'm not criticizing, I've just not seen it done this way, so I thought you could provide some insight into your choice.
it doesnt make any difference its just another way to load dbus and having some options for the gnome-session.
Your solution is much easier so i stick with that.

Similar Messages

SQL Server Reporting Services not starting automatically

Hi,
I have Reporting Services configured on my SharePoint 2010 Foundation server and the service is set to start automatically under a domain account. However, the service does not in fact start automatically and requires me to manually start it otherwise when
I try to use SharePoint to read some Reports, it doesn't work. Once I start the service, it works.
Is this normal behaviour? The service will remain started until the server is restarted (Windows Updates for example). I would like the service to start automatically when needed i.e. requesting to read a Report on SharePoint site.
Many thanks

Service should start automatic then, are you using some third party firewall that could block service?
And if you are using domain account for service, make sure it has log on as a service rights on local machine.
What is your event viewer saying?
In our domain environment we had similar problem with SQL and SSRS service, when I changed form of account for starting service from
domain\account to account@domain, problem was solved. I still don't really know how this helped.

Oracle Report Server 11g Start Automatically

Dear All
IF you want to start the report server in oracle forms 11g , you must go to this link :
https://localhopst:Port No/reports/rwservlet/startserver
I want to start the report server automatically as windows service without that step .
Thanks in advanced

The following can be used to start the managed server (i.e. WLS_REPORTS). Although this will not start the Reports inProc server, it will get the managed server started. A stand-alone rep server can be monitored by opmn and started automatically. See MyOracleSupport note 1126019.1
Refer to the product documentation for more info about Windows Services and working with WLS Managed Servers.
<blockquote>http://docs.oracle.com/cd/E23943_01/web.1111/e13708/winservice.htm</blockquote>
Also be aware of the following MyOracleSupport note:
<blockquote>1060058.1 - How to Install MS Windows Services For FMW 11g WebLogic Domain Admin and Managed Servers</blockquote>
Finally, you can use this search:
<blockquote>http://www.oracle.com/pls/as111160/search?word=windows+service</blockquote>
Edited by: Michael Ferrante (Oracle) on Dec 28, 2012 4:13 PM

Cluster and ASM services doesnt start automatically

Hi,
I have configured a 2 node 10g RAC environment (rac, rac2) in RHEL 4 through vmware.
However the cluster services and ASM services do not come up automatically after server reboot. I have to manually bring it up using ./srvctl command.
[root@rac2 bin]# ./crs_stat -t
Name          Type     Target     State     Host
ora....SM1.asm     application     ONLINE     UNKNOWN     rac
ora....AC.lsnr     application     ONLINE     UNKNOWN     rac
ora.rac.gsd     application     ONLINE     UNKNOWN     rac
ora.rac.ons     application     ONLINE     UNKNOWN     rac
ora.rac.vip     application     ONLINE     ONLINE     rac
[email protected]     application     ONLINE     UNKNOWN rac2
ora....C2.lsnr     application     ONLINE     UNKNOWN     rac2
ora.rac2.gsd     application     ONLINE     UNKNOWN     rac2
ora.rac2.ons     application     ONLINE     UNKNOWN     rac2
ora.rac2.vip     application     ONLINE     ONLINE     rac2
Could someone please guide me as to how these services can be brought up automatically upon every reboot?

Normally all services will start automatically, I am not sure how you installed and configured your RAC.
Here i am giving all options.
Option1:-
Re: CRS auto-start
Option2:-
See the below links.
http://jaffardba.blogspot.com/2009/03/how-to-startup-rac-database-services.html
http://www.dannorris.com/2009/03/12/start-database-services-automatically-after-instance-startup/
Option3:-
if you simply want to start the service upon server reboot, put srvctl
command in rc.local script under /etc directory.
Hope this solves your issue.
Regards
Click here to [createdisk, deletedisk and querydisk in ASM|http://www.oracleracexpert.com/2009/09/createdisk-deletedisk-and-querydisk-in.html]
Click here to see [ RAC database Instance hang/restart due to node eviction and Solution.|http://www.oracleracexpert.com/2009/09/ora-29740-evicted-by-member-0-group.html]
Click here for [Cross platform Transportable tablespace using RMAN|http://www.oracleracexpert.com/2009/10/cross-platform-transportable-tablespace.html]
http://www.oracleracexpert.com

Oracle doesnt start automatic

Hi to all,
we have a database in Oracle 8.1.7, some times the service comes up automatic, some times it doesnt come , we need to mount/open it thorugh Oracle DBA Studio manually then it is coming. the system has got enough memory like 512 MB. what could be the reason..
Thanks in advance.

Hi friends,
But i think Oracle service should/can start evenwe dont login to OS. i want to make it available just after putting on the server, some times i dont want to logon to the OS user, let the OS user /password dialog box comes and stays there. before it used to happen automatic, now its not happening, we have to open DBA studio and make it happen.
Thanks for your reply.. and advance thanks for this.

Gnome doesnt start automatically

Hi,
I ve followed all the steps that described in the beginners guide, but still cannot make it to have gnome at once.
Although i am able to login at gdm, what i am getting next is an x-session with 3 terminal windows.
If i want to have gnome i have to write exec gnome-session.
Is there any way to have gnome desktop without the need to write all the time exec gnome-session.
P.S I ve copied the /skel/.xinitrc to my /home directory and added exec dbus-launch gnome-session to it.
I still can not figure out what i am doing wrong.....
Please give me a hint cause if i cannot start the desktop i will be dissapointed.

MrWeatherbee wrote:
x-tra wrote:i cant believe that i forgot t select gnome session from the gdm screen that is i couldnt see any gnome!!!!:lol:
Yea. Based on your first post:
x-tra wrote:Although i am able to login at gdm, what i am getting next is an x-session with 3 terminal windows.
it seemed to me that you were successfully getting to GDM login but just were not getting to your gnome session, so that's why I didn't go into great detail about setting up GDM and just suggested using a different init file (~/.gnomerc in this case).
But, basically, you were choosing the wrong session at GDM, and once you selected Gnome, you were good to go, is that correct?
Anyway, back to dbus-launch ... any background on why you chose this methodology over putting dbus in the rc.conf daemons? I'm not criticizing, I've just not seen it done this way, so I thought you could provide some insight into your choice.
it doesnt make any difference its just another way to load dbus and having some options for the gnome-session.
Your solution is much easier so i stick with that.

Km Index does not Start Automatically

Hi:
I created an Index with one data source ( FSDB Repository ). In the TREX Monitor I edit the Queue Parameters:
Schedule type: Both
Schedule Time: All-0:01 ( Every minute ).
I have added documents manually to the repository and the index started autimatically each minute. Everything was working fine, but now the Index doesnt Start automatically, I have to flush it or do an incremental update if I want the documents quickly visible in the search. I haven´t make any changes in the queue parameters.
Please help,
Thanks,
Luciana

I have to same problem: Bought Elgato Sat 3 years ago. Now I decided to install it in the living room and bought a new i5 Mac mini. EyeTV works fine but does not wake up Mountain Lion 10.8.2 sometimes.
When I program wake up events manually via System Preferences or pmset command in the terminal, all works fine and my Mac wakes up. I tried everything, from clean reinstall to debugging AutoWake.plist and such.
Annoying!

Oracle Reports server 10g shutting down and starting automatically

Hi ,
My 10g Reports server runs on Redhat v4.0 .
From few days reports server log show that Reports Server is shut down and starts up automatically.
------- log -------
*** 2007/8/28 7:26:21:353 -- Shutting down engine rwEng-0
*** 2007/8/28 7:26:21:353 -- Reports Server shut down engine rwEng-0
*** 2007/8/29 9:21:51:688 -- Reports Server started up engine rwEng-0
*** 2007/8/29 9:53:10:650 -- Shutting down engine rwEng-0
*** 2007/8/29 9:53:10:651 -- Reports Server shut down engine rwEng-0
*** 2007/8/29 1:46:18:389 -- Reports Server started up engine rwEng-0
what might be reason for above issue ?
Thanks ...
Raju

The reports server is not shutting down but rather engines used by the reports server are being stopped and started. A reports engine requests data from the data source, formats the report, sends the output to cache, and notifies the Reports Server that the job is complete. These engines are cycled like connections in a connection pool. You can configure them in the ORACLE_HOME\reports\conf\rwservlet.properties file. Look here for details:
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1006129

"Reporting services" service does not start automatically

I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?

i have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why
when i reviewed the Event Viewer :
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 8/22/2010
Time: 12:05:26 PM
User: N/A
Computer: SERVICE-CENTER
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
   at Microsoft.ReportingServices.Diagnostics.R...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any body can help with this ,, because i didn't find anything helpful till now !!!
dear all
i installed SQL Server 2005 SP2 and it solved my problem
wish you all luck

When Starting OC4J, why the report server doesn't start automatically? !!

Dear All,
I have DS 10g on my system and I start the OC4J when I have to run either forms or reports.
But when I attend to start the do the following command from the form:
WEB.SHOWDOCUMENT(..../getjobid<jobid>?server=<servername>...), I have an error: FRM-41213: Unable to connect to the report server <servername>.
I noticed that if I run the following URL:http://<server>:.../reports/rwservlet, it gives me a list of command, but the server still not running..But if I add any command to the above URL like for example "getserverinfo" or "showjobs" then the server is started. Now, and after the command, if we return back and we run the report from the form, the report will run successfully.
The question WHY??
Regards,
Joe
Message was edited by: Joe
Joe Farah

Hello,
That's the way it works ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm
2.1.3.1 Starting the In-process Server (Windows and UNIX)
If you are using Reports Server as an in-process server (the default configuration), sending a run report request starts the in-process server; however, if you are sending a request through a command line, the servlet must be invoked first using either the run report URL or the Web command URL. When you have successfully started the servlet, this also means you have successfully started the in-process server.
If you use "Oracle Application Server", the "in-process" reports server will be started automatically by opmn ...
Regards

Automate the database and forms / reports services to start on windows 2008 server R2 startup

Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:

Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH

After restart Oracle Report Server some reports start automatically to run.

When our report server is restarted always a number of reports are started automatically.
I don't know why these are started automatically?
Is there a avoid starting these reports?

Hello,
If you are storing the jobs on the database then please check:
Using the Reports Server Queue PL/SQL Table and API - RW_SERVER_JOB_QUEUE (Doc ID 72531.1)
otherwise just rename the report server .dat files
1- Go to $ORACLE_HOME/reports/server directory
2- Rename Reports Server dat file.
Unix example :
mv reports_server_name.dat reports_server_name.dat.old
3- Try again to start Reports Server
Possible causes of the issue are:
1.scheduled jobs
or
2.restart of report server while some jobs were waiting in the queue
Regards,
Alex
If someone's answer is correct or helpful please mark it accordingly.
Edited by: AlexDiniasi on 02.08.2012 18:49

My phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help

my phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help

These are usually the features of a faulty battery. Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution. If no Coverage, still make Genius reservation and take iPhone to Apple Store for free quick (minutes time) battery diagnostic testing.

Help Required...Web Service does not start automatically...

I have a web service created with a EJB, everything is fine now.
After restarting the Server, web service doesn't get start automatically.
I have done the changes for the EJB - .ear project - application-j2ee-engine.xml file with the below.
<start-up mode="always"/>
But it still doesnt start. any help is appreciated.
This is the document i have referred.
http://help.sap.com/saphelp_nw04s/helpdata/en/25/0c08f3981343609d4045f8acaa0a76/frameset.htm
Thanks,
Sridhar
Edited by: Sridhar k on Jan 5, 2009 9:11 AM

Hai,
Just a tought...:-|
Check the value in your file, is it typing mistake or you have entered the same in your file.
<start-up mode="always"/> it should be <start-up mode="always">.
Regards,
Yoganand.V

Computer doesnt start up properly ?

Any help out there ?.
Had to unplug computer the other day ,as it was blocked and couldnt close down any other way . And since then doesnt start up properly,either takes a long time to start up or just remains with progress bar ,say looking for local discs .
I have it set to turn on automatically at 6.30am and this doesnt work anymore .
Any genius out there ??
Thank you.

Hello martin,
The first thing to try would be to reset the PRAM.
Resetting the PRAM and NVRAM.
If that does not improve things then run Repair Disk from your Install CD.
To do this: Insert the Install Disk 1 into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.
This will take you to the installation software, but you do not want to install.
Select your language, then go up to the top menu bar to Installer and navigate to the Disk Utility application.
Select the start up drive, then go to the First Aid pane where you can click on Repair Disk.
If it finds errors, repeat the process until it reports no errors.
After these repairs, quit the application, and restart normally.
Once restarted normally run Repair Permissions from the Disk Utility application found on your hard drive in Application/Utilities.
regards roam

Reports engine doesnt start automatically

Similar Messages

Maybe you are looking for