Reports error rep-1223
I am using Developer suite 9i reports. In the running of one report, i am getting the message rep-1223 "Invalid page size". I do not know, how to see help on the error message. Even i have the old Reports developer 2.5, but in that also, i forgot how to see the error message. Could i get help on how to see the menu sequence help to see the error message.
I hope, my quetion is clear. Please help in solving the doubt.
Rgds.
Hi,
Did you set the Layout Model, header/Main/Trailer --> Width/Height and need to check format type, some case run in Character mode or Bitmap Mode.
Regards,
Similar Messages
-
Error:- Rep-1223 Invalid page size
while am trying to run the reports which is having 67 columns , throwing error in Oracle reports 10g i.e Rep-1223 Invalid page size...plz help
As am having 67 columns in a reports like below,
----(1)--,(47),---(2)-----,-----(3)---------,-(4)--,--(5)--,---(6)-------,---(7)------
,--(8)------,--(9)-----,------(10)---------,-(11)-,--(12)---,-(13)-,----(14)------,
----(15)---,---(16)--------,----(17)---------------,-------(18)--------,
--------(18)---------,------(19)------,---(10)-----,-----(21)--------,---(22)------,
----(22)-----,----(23)--------,-(24)-,--(25)----------,----(26)--------,
-------(27)--------,
--(28)--,-----(29)--,-(30)-,--(31)-,
--(32)--,---(33)----,-(34)-,--(35)--,
--(36)--,---(37)----,-(38)-,--(39)--,
--(40)--,---(41)----,-(42)-,--(43)--,
--(44)--,---(45)----,-(46)-,--(47)--,
-------(48)---------,--(49)-,-(50)-,----(51)------,----(52)-----,-----(53)------,
-(54)-,--(55)---,--(56)-,----(57)-----,-(58)-,-(59)-,---(60)----,-----(61)------,
-----(62)--------,---(63)----,-----(64)----,---(65)----,--(66)--,-----(67)----,
thanks,
prasadreddy.Hi,
Did you set the Layout Model, header/Main/Trailer --> Width/Height and need to check format type, some case run in Character mode or Bitmap Mode.
Regards, -
Reports error REP-0069,REP-57054,REP-300
hi,
I am getting below error while running the report.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: Parallel query is not supported on temporary LOBs
SELECT DP.DES ==> CRIPTION AS "DEPARTMENT",
Plz suggest.
Tks,
Shubhen1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Report Errors REP-1051 and REP-1070 when saving
I just created a new report. I'm now getting errors REP-1051 and REP-1070 when I attempt to save the .rdf to my local hard drive (or anywhere else for that matter). Permissions where I try to save it are OK, in fact if I remove the SQL and insert "select * from dual", it saves nicely. Is there a query size limit of which I'm unaware? The SQL runs corrrectly, compiles correctly, etc. I just can't seem to save my work. Thank you in advance.
REP-1051 and REP-1070 What are the messages for these codes?
Which version and OS are you using?
How are you calling your report? -
Report error : REP-771: and ORA-12162:
Hi , i run report and it terminated with error message
The report terminated with error:
REP-771: A fatal PL/SQL error occurred in program unit afterpform.
ORA-12162: TNS:net service name is incorrectly specified
does anyone know how to fix this issue
thxORA-12162: TNS:net service name is incorrectly specified
$ oerr ora 12162
12162, 00000, "TNS:net service name is incorrectly specified"
// *Cause: The connect descriptor corresponding to the net service name in
// TNSNAMES.ORA or in the directory server (Oracle Internet Directory) is
// incorrectly specified.
// *Action: If using local naming make sure there are no syntax errors in
// the corresponding connect descriptor in the TNSNAMES.ORA file. If using
// directory naming check the information provided through the administration
// used for directory naming.
$How do you connect to the database ? Did you try connecting from Sql*Plus using the same connection string ? Result ? -
Reports error REP-0002 Unable to retrieve a string
I am continuing to receive this error in the production database. All I need to do is to recompile the report in the production database and use the new reports runtime.
Does any one know why is this happening and is there any solution for it.
REP-0002: Unable to retrieve a string from the Report Builder message file.
I am using Reports 3.0 and Windows NT.
Thanks in advance for your help.
nullMetalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6> -
Hi,
I face this error when i calling report from form.i am passing from date value in P_FROM_DT parameter in form.
Terminated with error: <br>REP-546: Warning: The value of restricted LOV parameter P_FROM_DT is not among the selectable values.
Please tell me what is the problem of this issue.
Thanks & advance,
MaranThanks for ur reply, i have solved this problem, In user parameters ,from date filed lov properties restricted check box should be unchecked if without values.
-
Reports Error - REP-0110 Rep-1070
Dear All,
When i try to open Report,
REP-0110 Rep-1070
error is showing.
Pl send the solution of open the reports.
Thanks
Regards,
Raghavan1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Report error rep-1070 with oracle reports
Hi,
I encountered a problem. I got rep-1070 error when I tried to open a oracle report using developer 2000 (2.5). Please let me know if you could help. thanks so muchHi Diana,
This error means Reports can't understand the file. One way this happens is if you transfer the file from one platform to another (e.g., UNIX to Windows) using FTP without putting it in binary mode. Another way you might get this error is opening a v1.1 report in 2.5 that wasn't migrated properly.
regards,
Stewart -
I am getting report error rep-0736&rep-1247 from concurrent
Hi,
I am running inventory report from concurrent is giving error as rep-0736&rep-1247.That report is giving result in report builder.
Can anybody please tell me.It's urgent.
Thank You,These two errors are just saying that there is uncompiled PL/SQL in the report:
REP-0736: There exist uncompiled program unit(s)
REP-1247: Report contains uncompiled PL/SQL
When you are running your report in Reports Builder are you using the same database connection as when the report is run from the concurrent manager (ie are you logged on as APPS in Reports Builder)?
If not, I would guess that the user you are connected to in Reports Builder has access to a database object you are referencing in PL/SQL that the APPS user does not have access to or refers to by a different name.
If you are connected as APPS, then I would suggest that you do a full recompile in Reports Builder (Program -> Compile -> All) and see if that identifies any errors. -
Rep - 1223 (Invalid Page Size)/Urgent
Hi,
I has developed a report in character mode.Then i save the report.In order to have a precise alignment i then changed the design in character units property to Yes.After some time,while running the report it gave an error Rep - 1223 (Invalid Page Size).
On seeing the property inspector for Paper layout for the Main Section,i saw that the width and height property increased to some very high level.On trying to reducing the width and height size ,it gave a message that unable to reduce it since the layout is not large enough to accomodate layout items.
Even when i do not save the report the next time,the error somehow persists.
This kind of error comes very occasionally when try to design character mode reports using design in character units property set to Yes.
Kindly help me out.
Regards
DeepakHi Deepak
I suggest you apply the latest patch set and check if issue still exist. There are no known issues like this currently.
Thanks
Rohit -
Hi Team,
I'm trying to run Invoice Aging report. When I'm running this it's erroring out. Here I'm posting log file
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXRAXINV_SEL_SE module: XXXXX Invoice Print Selected Invoices OBA
Current system time is 20-JUL-2012 11:05:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_cust_trx_class='INV'
p_cust_trx_type_id='1'
p_trx_number_low='10040'
p_trx_number_high='10040'
p_customer_id='10041'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749: There is no remit to address defined for country IT and state .
REP-1419: '': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749
Report Builder: Release 10.1.2.3.0 - Production on Fri Jul 20 11:05:30 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Environment
Application: 12.1.3(OBA)
OS: Linux 5 - 64 bit
Please do the needful.
Thanks
Rk
Edited by: user11157039 on Jul 20, 2012 12:47 PMMSG-43749: There is no remit to address defined for country IT and state .Troubleshooting Remit To Address in Oracle Receivables [ID 1101855.1]
Transactions Workbench: Field Defaulting Logic [ID 1413565.1]
REP-0069: Internal errorARXAGE Aging 4 Bucket Report Errors REP-0069 Internal Error [ID 1321276.1]
Invoice Aging Report Errors With Rep-1419 Rep-57054 Rep-0069 [ID 1340456.1]
'Aging - 7 Buckets Report' ARXAGSW Fails with ORA-01722 [ID 1061714.1]
R12: Some Payables Reports Not Working. Same Errors In Log File: REP-1419, REP-0069, REP-57054 [ID 818320.1]
Thanks,
Hussein -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Error REP-0300: ORACLE error occurred while running Custom Report
Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein -
Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error
I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS.
Maybe you are looking for
-
Not able to see the open items in f-53
Dear All, One user has posted some vendor invoices by using the fb60 in 2010 december month.when the user is trying to do the payment by using "f-53" transaction code, the open items are not appearing here. the items are not set blocked. We are able
-
Crystal Reports Image box does not display images.
Post Author: xbhavesh CA Forum: .NET i have CR report which has a Imagebox to display images from db table. i am storing the images in a table as path. in my dev machine when i load the .aspx page with the crystal report it shows the image in the box
-
Problem in assigning characteristics values to characters against material
Hello Gurus,, I am doing a wrapper RFC to populate characteristic values to characters and finally that needs to be visible in material classfication view. The following is my code let me know if any thing needs to be corrected on this *"*"Local Inte
-
Which API to update supplier site VAT registration number?
I am using the AP_VENDOR_PUB_PKG.Create_Vendor_SITE API call to populate the VAT_REGISTRATION_NUM field, whcih then appears as the "Default Reporting Registration Number" under the Tax Details page of the supplier screens. Unfortunately the call to A
-
Cannot open attachment on onenote posted on Sharepoint
Dear All. I've created OneNote with some PDF, Excel files attached. The problem is user can't open the attachment by double click or cant even see those attached file in SharePoint. Is there a way to let them open it with double click in SharePoint w