Reports Failing(Stack Overflow Error) - very urgent

Hi,
I try to run a report on the command line or using reports runtime engine or reports builder in win2000 and i keep on getting this error:
The exception unknown software exception(0xc00000fd STACK OVER FLOW ERROR)occurred in the application at location 0x008c7781.
The report runs fine in other formats(i.e pdf,html,htmlstyle sheet) and preview mode .When i selected delimited format, report fails at the time of writing in to text or excel format .
Please advice me .
Thanks in advance.

Hi,
Try with new desformat delimiteddata which is available with Report 6i patch 11/Reports 9i Patch 1
Thanks
Oracle Reports Team

Similar Messages

Payables Open Interface Pgm fails without any error(Very urgent)

All,
I'm into an integration project where in I'm pushing Invoice doc from a third party appln to Oracle apps (11.5.10.2) thru payables open interface. The integration is smooth till today. We pushed a record today, but the concurrent neither picks up the data but failed with 'completed error' status. When I delete the same record from the interface, the concurrent runs fine. So we are sure there is some issue with the data in my record. Since concurrent is failed without any reason, from where I can get the log to know what is the actual problem with that record? Pls help me with your inputs.
Thanks,
Sen

Sen,
To enable trace, please refer to this document (skip the part about generating TKPROF, just check the concurrent request output file if more details about the error are logged after enabling trace and setting the profile option).
Note: 453527.1 - How To Trace a Concurrent Request And Generate TKPROF File
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453527.1
The database log file can be usually found under $ORACLE_HOME/admin/<SID>_<hostname>/bdump directory (or from SQL*Plus, issue "show parameter background_dump_dest").
Regards,
Hussein

Stack overflow error while creating connection using Oracle10G dirver

Hi,
Our web application built on Servlets runs on the iPlanet web server (In solaris machine). Earlier we used JDK 1.5 update 6 with oracle 9i driver and now got migrated to JDK 1.5 update 10 with same driver. Everything went fine until we started testing the environment with oracle 10G driver. Java 1.5 update 10 with oracle 10G driver throws "Stack overflow error".
Driver version is - 10.2.0.2.0
This occurs only when I access the portal. When I created the single main program and try to run it in the solaris machine it works fine. But wen I try to access the portal keeping this driver under classpath, it fails. Please let me know if anyone have any clues.
When I looked into it, I am able to find that the "stack overflow error" occurs at the point the code line DriverManager.Getconnection("url", "username", "pwd") executes.
Thanks in advance
below the stacktrace of the exception from webserver error log..
06/Mar/2007:04:20:40] failure (10198):
for host 202.54.182.136 trying to POST /wr/servlet/WorkRequest, service-j2ee reports: StandardWrapperValve[WorkRequest]: WEB2769: Allocate exception for servlet WorkRequest
javax.servlet.ServletException: WEB2778: Servlet.init() for servlet WorkRequest threw exception
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:949)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:658)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:244)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
----- Root Cause -----
java.lang.StackOverflowError
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(
[06/Mar/2007:04:22:20] info (10198):
CORE5073: Web server shutdown in progress
[06/Mar/2007:04:22:21] info (14506):
CORE1116: Sun ONE Web Server 6.1SP5 (64-Bit) B12/02/2005 04:37
[06/Mar/2007:04:22:21] warning (14513):
CORE1251: On group ls1, servername pstst42.pedc.sbc.com does not match subject "" of certificate Server-Cert.
[06/Mar/2007:04:22:21] warning (14513):
CORE1250: In secure virtual server https-vts, urlhost does not match subject "" of certificate Server-Cert.
[06/Mar/2007:04:22:21] info (14513):
CORE5076: Using [Java HotSpot(TM) 64-Bit Server VM, Version 1.5.0_06] from [Sun Microsystems Inc.]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [servlet]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [vts/servlet]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [cron/servlet]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [find/servlet]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [cb/servlet]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [wr/servlet]
[06/Mar/2007:04:22:21] info (14513):
WEB0100: Loading web module in virtual server [https-vts] at [search]
[06/Mar/2007:04:22:25] info (14513):
HTTP3072: [LS ls1] ready to accept requests
[06/Mar/2007:04:22:25] info (14513):
CORE3274: successful server startup
Message was edited by:
Nandakumar_s
Message was edited by:
Nandakumar_s

Yes, request goes through connection pool but weird
thing is application throws stack excatly where
DriverManager.getConnection gets executed.
Not weird at all.
This is what I am guessing that you did. You changed the driver and some other stuff, like configuration information.
Then when it blew up you tracked down in your code where you see the stack overflow. That happens to be on the connection line. That is not where the overflow 'occurs' - it merely represents where you saw it.
That line however isn't using the oracle driver. What it is using is a connection pool of some sort. That connection pool is configured somewhere. And that configuration is self-referential (or maybe refers to a another driver which refers back to the original.)
And that causes you stack over flow.

Stack overflow error

Hi..
I have problem with this code.
   class test
       test tt=new test();   //1
       String name1;
    test() {}
    test(String i)
          name1=i;
         //tt=new test();    //2
   public static void main(String arg[]){
              test t1=new test("kj"); //3
} When I use line 2 (nstead of line 1 ) for initializing the ref variable iam not having any problem.
But if i use as in line 1 iam getting stack overflow error..
I thought tht calling a constructor recursivley results in a stack overflow error..
But iam instantiating t1 with a one arg constructor (line 3) for which tt (line 1)is intialized,then where is the recursion happening..
can any one pls clear..
Thnx.
mysha..

please use [code][/code] tags around your code - makes it much easier to read.
I think you have it - consider this code:public class StackOverflower {
    private StackOverflower so = new StackOverflower();
    public static void main(String[] args) {
        StackOverflower mySO = new StackOverflower();
}Running this will overflow the stack since creation of an instance of StackOverflower requires creation of an instance of StackOverflower. This code though:public class NonStackOverflower {
    private NonStackOverflower nso = null;
    public NonStackOverflower() {
    public NonStackOverflower(String s) {
        this.nso = new NonStackOverflower();
    public static void main(String[] args) {
        NonStackOverflower myNSO = new NonStackOverflower();
}Won't, since the creation of a new NonStackOverflower is not required to create a new NonStackOverflower instance.
Did that make sense? I may have gotten confused and failed to illustrate your situation with my code...
Good Luck
Lee

Stack Overflow Error for JNI program with Jdk1.3

I wrote a JNI wrapper for a third party sofware (written in C) to use some exported functions provided. My program runs fine when using Sun JDK1.2.2, but I got the following error when using Jdk1.3 to run the program (It's a runtime error, only the version of runtime virtual machine matters.)
# An EXCEPTION_STACK_OVERFLOW exception has been detected in native code outside
the VM.
# Program counter=0x9073337
A stack overflow was encountered at address 0x09073337.
I tried IBM jdk 1.2.2, it gave me a similar error complaining about the stack overflow error.
The vendor of the third party software denies any wrong doing in their code and I don't have their source code. A test client (simulate the Java client) I wrote in C works perfectly fine and as I mentioned earlier the same java progarm runs OK with jdk 1.2.2, without any change to my system stack size. Does any body know what this is about and the solution for this?
Thanks!
My email: [email protected]

I had the same exception occur in my JNI code and I have some advice on things to look for.
Symptoms: The C++ code runs fine when called in an native executable but when it is wrapped by a JNI call inside a DLL you get the following exception:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_STACK_OVERFLOW occurred at PC=0x100d72e5
Function name=_chkstk
The address will be different of course.
In my tests I isolated the problem to an allocation of a char array like so at the top of one of my wrapped C++ methods:
char buf[650000];
As you see this code is requesting 650000 bytes of stack memory. When run in a native executable there was no problem but when I ran it wrapped in the JNI call it blew up.
Conclusion: There is a much smaller stack space when using JNI OR the added overhead of my JNI wrapper exhausted the available stack space OR this is a stack space issue related to DLLs.
Hope this helps. Anyone with insight on this please put in your 2 cents.

TROUBLESHOOTING A STACK OVERFLOW ERROR

제품 : ORACLE SERVER
작성날짜 : 1997-02-04
==========================================
TROUBLESHOOTING A STACK OVERFLOW ERROR
==========================================
OVERVIEW
A stack is a temporary storage space for programs. All programs have a
stack. MS-DOS switches stacks for hardware interrupts to prevent stack
overflows. Some programs such as EMM386.EXE, SMARTDRV.EXE, mouse drivers
and TSR's will hook these hardware interrupts. When a hardware interrupt
hook requires more stack space than is available, a stack overflow error
occurs.
SYNTAX
The STACKS= command in your CONFIG.SYS specifies two parameters; the
number of stack frames and the size of those frames.
STACKS=x,y where x = number of stack frames
minimum value is 8
maximum value is 64
y = bytes of each stack frame
minimum value is 32
maximum value is 512
For most PC's the default is STACKS=9,128.
TROUBLESHOOTING
Perform the following troubleshooting steps prior to changing the STACKS=
command:
o If you are using a third party video driver reconfigure the pc to use the
generic Windows VGA drivers.
o Be sure you have 512K conventional RAM free before you load Windows.
You can check the free memory by using the MEM /C command. The value
for "Largest executable program size" should be 512k (524,288 bytes).
o Personal Oracle7 requires 8MB RAM. An additional 8MB RAM is required
when PL/SQL is also installed. The trial product requires PL/SQL and
therefore automatically installs it.
o Add the /X switch to the SMARTDRV.EXE driver in AUTOEXEC.BAT. This
switch disables the write-behind caching.
o Exclude the video graphics area from the memory manager.
i.e. DEVICE = C:\WINDOWS\EMM386.EXE X=A000-C7FF
The video driver's manufacturer can provide you with the appropriate
range to exclude..
o Boot clean.
CONFIG.SYS AUTOEXEC.BAT
========== ============
FILES=45 PROMPT$P$G
BUFFERS=20 PATH=C:\WINDOWS;C:\DOS;\C:\
DEVICE=C:\<dir>HIMEM.SYS SET TEMP=C:\<valid path>
STACKS=9,256
SHELL=C:\<valid path>\COMMAND.COM /E:1024 /P
!!!CAUTION: Your system may have third-party drivers that must be
loaded! Such drivers include hard disk drivers, disk
partitioning disk compression utilities.
Removing such drivers can render your hard drive
inaccessible and/or damage your data.
DO NOT REMOVE ANY DRIVER(S) THAT YOU CANNOT IDENTIFY ITS
PURPOSE!
o Add STACKS=9,256 to CONFIG.SYS. If you already have this statement
then increase the stack frames to 16.
The Microsoft Knowledge Base (http://www.microsoft.com/support/)provided
technical resources for this bulletin. .............................

The same issue seemed to be solved for me after I installed
the ColdFusion 8 beta plug-ins for Eclipse
http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_adobecf8_beta

CIN stack overflow error

Im using an recursiv c++ function in my VI.
After severall calls the VI crashes, printing an
stack overflow error.
I already increased in Visual Studio 6.0 the Link
setting: allocate stack. But nothing changed.
I need help fix this problem!!
My prg. looks like this:
recursiv (....) {
int array[..][..][..];
recursiv (..);
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

> Im using an recursiv c++ function in my VI.
> After severall calls the VI crashes, printing an
> stack overflow error.
> I already increased in Visual Studio 6.0 the Link
> setting: allocate stack. But nothing changed.
> I need help fix this problem!!
>
> My prg. looks like this:
>
> recursiv (....) {
> int array[..][..][..];
> ....
> recursiv (..);
> }
If you are truly allocating a three D array of ints
on the stack, then it makes sense that you will run
out of stack space sooner or later. I can't help
you with increasing the stack size, but if you move
your array into a memory block and store the pointer
on the stack, then you will use less stack space and
avoid the problem.
In otherwords:
recursive() {
int *array;
array= DSNewPtr()
array[][][]= ...
recursive();
DSDisposePtr();
Greg McKaskle

Stack overflow error while trying to run expense management activity on oracle BPM studio 10.3 on windows8 machine

I am getting stack overflow error. While trying to bring expense creation screen on windows 8.
I trying couple of settings in eclipse.ini file to increase the size but nothing helped. Can someone please advice?
Below is eclipse.ini file
-showsplash
fuego.eclipse.studio
--launcher.XXMaxPermSize
--256m
-vmargs
-Xms600m
-Xmx600m
-Xss500m
-Dfuego.fstudio=true
-DprodMode=preProduction
-Dbea.home=C:\OraBPMStudioHome\..
-Djava.endorsed.dirs=""
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dfuego.studio.engine.java.options=-Dsun.lang.ClassLoader.allowArraySyntax=true
-XX:PermSize=512M
-XX:MaxPermSize=1024M
-Xbootclasspath/a:C:\OraBPMStudioHome\eclipse\jre\lib\ext\tools.jar

It looks like you are trying to run OSX on a Windows PC with VMware Workstation...
This is NOT supported by VMware and doing so will break Apples EULA, you need Apple hardware to run OSX.
No one here will be able to help you and you should investigate other legal and supported alternatives.
// Linjo

Stack Overflow Error - URGENT

Problem Scenario :
We have a J2EE application, which has a front end developed in Java Swing with usage of heavy graphics & managed by the weblogic server. There are several application details in the Hash-Maps containing with nested Hash-Maps & Hash maps contains the Serializable Java Value Objects. These serializable Java Objects contains values which are Java Primitive Types as well as Other Java Value Objects. When the client launches the application & tries to read these Hash-Maps from the server, the Stack Over Flow Exception as given below occurs. This has started occurring from a few days only.
Stack Trace :
java.lang.StackOverflowError
at java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:1812)
at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:480)
at java.util.HashMap.writeObject(HashMap.java:798)
at java.lang.reflect.Method.invoke(Native Method)
at java.io.ObjectOutputStream.invokeObjectWriter(ObjectOutputStream.java:1864)
at java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1210)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:1827)
at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:480)
at java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1214)
Can you suggest something in this regard? This is VERY URGENT !!
Regards
Tanmay Agarwal
[email protected]

This works fine, writing the object to the stderr:
import java.io.*;
public class a implements Serializable
Object        other;
public static void main( String args[] ) throws IOException
    a   w1 = new a();
    a   w2 = new a();
    w1.other = w2;
    w2.other = w1;
    ObjectOutputStream o = new ObjectOutputStream( System.err );
    o.writeObject( w1 );
    o.flush();
    System.out.println( "let us call it a day" );
}

Stack overflow error with production release

Hi,
I am using Flex 4.5.1 and I am getting a weird error upon exporting a production release. Here is the stack trace:
VerifyError: Error #1023: Stack overflow occurred.
          at spark.components.gridClasses::GridLayout/intializeGridVisualElement()
          at spark.components.gridClasses::GridLayout/layoutIndicator()
          at spark.components.gridClasses::GridLayout/layoutCaretIndicator()
          at spark.components.gridClasses::GridLayout/updateDisplayList()
          at spark.components.supportClasses::GroupBase/updateDisplayList()
          at spark.components::Group/updateDisplayList()
          at spark.components::Grid/updateDisplayList()
          at mx.core::UIComponent/validateDisplayList()
          at spark.components::Group/validateDisplayList()
          at mx.managers::LayoutManager/validateDisplayList()
          at mx.managers::LayoutManager/doPhasedInstantiation()
          at mx.managers::LayoutManager/doPhasedInstantiationCallback()
As you can see there is no trace of our own classes anywhere. I don't get this error if I use the normal debug version. We are very close to going live and we can't use the debug version files as they are bulky and are increasing the initial load time of the application.
Please help!
Thanks.
Manoj

Hey I get this suddenly in an app that's been running and working fine. We just updated with a release build for some other updates and I get this error. Here's the context:
I am using Flex 4.6, have a component that extends the Flex 3 AdvancedDataGrid for some lightweight customization of how column resising work. The component is used in several of our apps. But, for some reason, and with no code updates to this particular component in a while, when I click on a row in the grid, I get this stack overflow exception too. The exact same stack trace as the one mentioned by the original poster.
Anyone have a clue why I would be seeing "spark.components.gridClasses::..." in my stack trace to begin with when the component that is being clicked on is a Flex 3 AdvDataGrid component? I've seen some mention of the compiler error that somehow bashes the stack under the perfect circumstances. But, in our case, we've eliminated all of our own event handlers (click/etc) from the grid and we still get this error and only in the release build. So, there's no way to change any of our code to fix it b/c none of our code is executing when the error occurs.
This is very very odd stuff. Any ideas???

How to enable RFC and how to use it in Report..please tell its very urgent

Dear Techie's,
Please tell its very urgent..
How to enable RFC and how to use it in Report. ??
Virendra

hi,
pls chk any of these links.
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
rgds
Anver

Financial Reporting Studio has overflow error when opening any report

Hello everyone!
I faced with problem in FR Studio. When I try open any report is appears an error "Overflow". In others machines this error is not appears.
Version of FR Studio: 11.1.2.757
Many thanks for your advices!

Uninstall CRVS2010 that you currently have installed.
To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325 - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
Reinstall CRVS2010 SP1 from here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
- Ludek

The URL to run a Report stored in the Server-VERY URGENT

Hi ,
I wanna to know the url to run the report stored in 9iDS.
e.g. in earlier version we need to use the CGI scripts to do the work e.g. http://hostname:port/srwcgi60/rwcgi.exe?report=test.rep ..somethin like this ..but in 9iDS i m not able to get the url..when i do http://hostname:port/reports/ the home page of reports come thats it ...but how to run it ...
please its VERY URGENT..
thanx a lot..
Bhavna

hello bhavana,
how ru.
web.show_document('http://servername:port/dev60cgi/rwcgi60.exe?report=reportname&userid=username/password@databasename&server=reportservername&destype=cache&desformat=HTML');
put the above coding to a when-button-pressed trigger.
it will work.
http:\\servername:portname\dev60html\runrep.htm
this will give u the reports home page.
in that enter the report name and username and password.
this also will work.
looking forward to hear from u.
bye. take care.
natesh

FRM-99999 Network Error(Very Urgent)

I have installed Oracle 8.0 & Forms 5.0 on NT 4.0 & also WAS
3.0 on the same Machine. But the problem, I am facing is that
the forms show up, but we get FRM-99999 Network Error at any
arbitary point of time .
Please help
Very urgent.
Regards
Sachin.
null

Hi gyus,
I got a similar error while having images included on the form.
After cutting the images out it worked fine.
When this is the problem, check your directory mapping in the web
server.
Regrads.
gang lee (guest) wrote:
: Sachin Borikar (guest) wrote:
: : I have installed Oracle 8.0 & Forms 5.0 on NT 4.0 & also WAS
: : 3.0 on the same Machine. But the problem, I am facing is that
: : the forms show up, but we get FRM-99999 Network Error at any
: : arbitary point of time .
: : Please help
: : Very urgent.
: : Regards
: : Sachin.
: gang lee reply:
: I also encounter such error,at the same time ,I got the other
: error: f50web32 error.I had found that my fmx file contain the
: simplfied chinese,but in the registry, NLS_LANG is set to
: 'AMERICAN_AMERICA.US7ASCII',I changed the NLS_LANG into
: 'simplified chinese',the error disappear!by the way,I had also
: found that the application containing multi_documents may
: encounter such the error. I hope the experience is helpful for
: solving your error!
null

Stack overflow error with Sun JVM

We have an application that was running on MSJVM. Recently we migrated to SUN JVM. After the migration, we get the error message - "Stack overflow at line 0 " at random, while loading applets.
Any solutions to this problem will be greatly appreciated.
Thanks
Nabeel

Where do you see the error message (Java console, ...?)
Googling for "stack overflow at line 0" hints that the problem may be related to JavaScript. Is there JS on the web pages that elicit the error? The JVM upgrade might be a coincidence.

Reports Failing(Stack Overflow Error) - very urgent

Similar Messages

Maybe you are looking for