Reports hung on 9ias Rel2 with MissingResourceException

We are getting reports hung on the reports server. In the trace file of the server we get this error. The report does not hang when run in report builder. It also only hangs every now and then not all the time.
[2002/8/5 0:16:26] Warning 50103 (ResourceManager:getString): java.util.MissingResourceException: Can't find resource for bundle oracle.reports.utility.resource.RWGenericBundle, key 7
Does anyone know what is causing this. In the report trace we get this error as well:
[2002/8/5 8:33:50] Error 50103 (C Engine): 08:33:50 ERR REP-0002: Unable to retrieve a string from the Report Builder message file.
[2002/8/5 8:33:50] Error 50103 (C Engine): 08:33:50 APP ... ( Name unknown

We have identified several different hangs in the reports server since going production. You can try our latest patch 9.0.2.0.5 to see if you can still reproduce the hang.
Thanks,
-Shaun

Similar Messages

Problems with Reports web in 9ias

Hi everybody there,
Im having troubles with my reports web in 9ias after the migration of our applications to a new server but with the same OS and same version of DB and Application server.
Every time that we try to execute a report web from aour new server it charges on the browser with values of width and height too bigs (height=2699,width=8807).
This problem doesn´t happen on the original server. Can anybody help me to find the solution pls?
my server has:
Oracle9i Application Server, Version 1.0.2.2.2
Forms and Reports 6
Jinitiator 1.3.1.13
Thanks in advance,

In rwnetwork.conf change
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE discoveryService SYSTEM "file:/home/oas10g/frhome/reports/dtd/rwnetworkconf.dtd">
<discoveryService>

<namingService name="Cos" host="IP of ur Server" port="14021"/>
</discoveryService>
bounce OC4J_BI_Forms
run naming service.sh 14021

Portal9i : Inoperative after 9iAS Rel2 install

After I supposedly installed and patched 9iAS Rel2, I cannot get Portal to work at all. I can't control it via EM nor can I access it via the url http://<host.domain>:7778/pls/portal. I also cannot control Forms, Discover nor Reports via EM But main concern at this time is Portal.
I response to a related EM page problem, I was told by Pavna Jain (9iAS Product Management) that :
In order to use EM to manage Portal, you need to apply the workaround suggested in the Portal release notes.
Forms can be managed only by Oracle Management Server (OMS) that is part of Oracle9iAS Infrastructure.
I've looked and looked by can't find the workaround discussion talked about. And if I could access Portal I wouldn't neccesarily care about the EM-control of it.
Anyone with Portal9i working know what's going on. The user/schema portal exists in the metadata database (on same host).

Gary,
For Portal specific issues, you might have better luck trying the Portal discussion forums. Portal Product Managers monitor those mail lists. Have you tried one of them?
Thanks,
Ashesh Parekh
Oracle9iAS Product Management

Configuring Report Services in 9iAS

Enabling Report Services in 9iAS:
We have installed Oracle 9iAS on Win2000 Server. We have edited the rwservlet.properties file to give our own report server name like �rep9iserevr� by adding a line SERVER = rep9iserver.
Then we made a copy of the rwserver.template file and renamed this file as �rep9iserver�. Our Registry variables are like this:
REPORTS_PATH F:\FORMS
REPORTS_TMP C:\TEMP
FORMS90_PATH F:\FORMS
We are able to work with Forms 9i. But when we use Web.Show_Document for calling reports from Forms 9i using the following command in Internet Explorer
http://hostname:7778/reports/rwservlet?server=rep9iserver&report=9itestrep.rdf&destype=cache&desformat=html&userid=scott/tiger@mydb
Rep-51002 � Binding to the report server rep9iserver failed.
But, if we are accessing the report services without the report file name, etc like
http://10.192.20.14:7778/reports/rwservlet then the browser displays the default page of the report services. Does it mean the report service has already started?
If I call the URL http://10.192.20.14:7778/reports/rwservlet/getserverinfo it displays the following error message:
<?xml version="1.0" encoding="ISO-8859-1" standalone="yes" ?>
- <serverInfo name="rep9iserver">
<error code="51002" component="REP" message="Bind to Reports Server rep9iserver failed" />
</serverInfo>
If I call the URL http://10.192.20.14:7778/reports/rwservlet/getserverinfo?server=rep_<hostname> then
we get the following error:
<?xml version="1.0" encoding="ISO-8859-1" standalone="yes" ?>
- <serverInfo name="REP_CHEFP06">
<error code="51019" component="REP" message="Need system user authentication" />
</serverInfo>
Does it mean, the clients are not having access to the server? Please note that the client machines are having full write access to the FORMS_PATH (F:\FORMS).
Moreover, Oracle Enterprise Manager shows that �Report Services� Status as Down. Similarly, we are not able to select the �Single Sign On Enabling for Forms Services� in the OEM.
If the status is �Down�, then how are we able to access the report services through the URL (though we are unable to run the report).
So, please give us some ideas to make the reports services available from Forms.
Thanks in adv.
Jagadish Babu.

Hi all , I have a query hope can be answered from here ,
I have installed 9IAS appllication server and 9i Database on a windows 2000 server , which was working fine until now, two days back i had shut down the services of both IAs and Infra in the sequence and shut down the machine.
After restarting the machine the Reports services of IAS are not starting i tried to start manually but still its the same problem. I have checked the log which is pasted here
*** 2005/1/6 10:39:17 -- Reports Server is starting up
*** 2005/1/6 10:39:21 -- Reports Server started up engine rwURLEng-0
*** 2005/1/6 10:39:23 -- Reports Server started up engine rwEng-0
*** 2005/1/6 10:39:28 -- Shutting down engine rwEng-0
*** 2005/1/6 10:39:28 -- Shutting down engine rwURLEng-0
*** 2005/1/6 10:39:28 -- Server is shuting down
by which im not able to work for Reports and
please reply as soon as possible

As configuring the services like for example that of Forms and reports in Oracle 9iAs

Como configurar los servicios como por ejemplo el de Forms y reports en Oracle 9iAs para sistema operativo Solaris. Para que los reports y forms sean vistos en la WEB.

Jenny, for Forms and Reports configuration issues, you might try posting to the Oracle9i Forms forum:
Forms: http://forums.oracle.com/forums/forum.jsp?id=345390
Reports: http://forums.oracle.com/forums/forum.jsp?id=338539
These are actively monitored by product managers from those groups. If your question covers Web services with Forms and Reports, check out the viewlets showing how to make those aspects of Forms and Reports work at:
http://otn.oracle.com/tech/webservices/sample.html
We are planning on rolling out some new content and how to's specific to Oracle Reports and Web services probably the last week of July. The content is just been written, reviewed and recorded this week based on the examples you see in those viewlets.
Mike.

Has anyone installed CM SDK into 9iAS rel2 90201 middle tier?

Hi all,
I have to install CM SDK into 9iAS rel2 90201 on solaris. We have a functioning environment (middle tier and infrastructure on the same machine). Has anyone done this? Any problems? Gotchas?
Thanks in advance!
Tracie

Installed CM SDK into 9iAS 2 and Oracle 9i on the same machine (not using Infrastructure). Had problems with CM SDk configuration. Finally setup the server, but cannot figure out how to login as a regular user. Looked all over for the user guide and found none existing.

IFS-20010 when running in 9ias Rel2

We have a web-application built using JSP/Java and IFS. Running as a web-app under 9iAS Rel2, LibraryService.startService always fail with IFS-20010. The same code runs nicely outside the web container.
Looking at file activity on the computer, we see some peculiarities:
1) While running under 9iAS the process tries to find the file c:\oracle\AppServer\javacache\cachedobjects\classes\oracle\ifs\server\properties\IfsDefault.properties. When this file does not exist, it looks no further.
2) Running outside 9iAS, the process looks in the classpath (as expected).
Does anybody know anything about this?

Here's what one of our developers has to say:
You can try putting the file in the web app's WEB-INF/classes directory.
It depends on where they put the ifs jars, because they may be loaded by a classloader that can't look in WEB-INF/classes. I assume they have the jars in WEB-INF/lib. If they put them somewhere higher up then it won't work.
I need more info, it's all about class loaders. There are other techniques to add different directories to the classpath of different class loaders, but again it matters where ifs.jar is.
They can add the IfsDefault.properties to the ifs.jar file, but of course that's one ugly solution, but it'd work all the time.

Odisrvmgr problems : 9iAS Rel2 install / patch

Trying to run through the hundred of steps listed in 9iAS Rel2 Interoperability patch (for infrastructure instance). An OiD patch says I need to
> oidmon start
> oidctl server=oidldapd instance=1 start
> odisrvreg -h <host> -p <oid_port> -D "cn=orcladmin" -w superuser_pswd
For the odisrvreg stuff, I entered
> odisrvreg -h host.domain -p 4032 -D "cn=orcladmin" -w welcome
after spending an hour looking for superuser pswd and finding post in this forum that says it is welcome.
All I get is a message saying LDAP Connection Failed.
- Is welcome the real default pswd for oid superuser (which why didn't it specify password in install docs)
- Is 4032 the correct default port. portlist file say that it is for Non-SSL. If I specify 4031 then command just never returns control at all.
- what is this doing and supposed to do
Thanks for any help.

I don't know anything about 9iAS interoperability with ldap, but I can tell you a few things about the LDAP server:
try specifying connect=<net_service_name> in your oid commands, with <net_service_name> being the service name of your database.
Sth like:
oidmon connect=mydb start(this should return a message that the monitor actually started, on some platforms that doesn't happen if you don't specify the connect parameter)
oidctl connect=mydb server=oidldapd instance=1 start If you didn't change anything about your ldap configuration, this starts an ldap server instance at port 389. You could verify this by using netstat (netstat -ln on linux). Maybe you should also check if there's no other ldap service listening at that port before you enter the oidctl command. If that would be the case, maybe you should shut down the other ldap temporarily.
Since the default port is 389, this means you should use the following:
odisrvreg -h host.domain -p 389 -D "cn=orcladmin" -w welcome The default superuser username/passwords are indeed correct.

Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1

Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinath

Check out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful.

Need a GR/IR report similar to MB5S but with dates

Hello MM Gurus,
Is there a GR/IR report similar to MB5S but with dates?
Is there an S_ALR report?
Thanks
George

ME80FN with document date field, select purchase order history. Both GR and IR documents displayed here. Also use LIS reports like MCE3, MCE1 and othere but with period selection.
If it helps, kindly give points.
Regards,
RM

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Issue filtering a report (based on narrative view) with a dashboard prompt.

I used HTML and java-script codes in narrative view to solve the issue of "linking different reports on selecting values from a drop-down". A new issue has cropped up due to that implementation. The issue is that i can't attach a dashboard prompt to such a report. This means, when i put this report on a dashboard page with a dashboard prompt to help filter the report, the report does not gets filtered (it does not seems to be connected to the dashboard prompt).
Has anyone faced this issue before? If yes, please let me know how to tackle it at the earliest.
Regards,
Ramil

Hi,
sorry , i could not solve the problem. the below case statement i put in the formula of a date column but i got some syntax error.One more thing is case statement is appearing in the select query not in where condition. Do u mean to say if i will put the same column as is prompted then it will come in where condition.
Could u plz help me where i am doing wrong .
case when '@{Period}'='Weekly' then Alerts."Creation Date and Time" between '@{PStartDate -7}' and '@{PStartDate}' end
[nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <between>: Syntax error [nQSError: 26012] . (HY000)
SQL Issued: SELECT Alerts."Business Domain(s)", Alerts."Closing Action Type", Alerts.Closer, case when ''='Weekly' then Alerts."Creation Date and Time" between '' and '' end FROM "Common Productivity Reports for Alerts"

How to configure oracle 6i report server run time component with application server

we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).

You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Thank you. The old one will stay reported?

Download alv report output to excel format with out header line

Hi experts,
i want to download a alv report output into excel formatt with out the header line but it has to download including field description. as this output will fed into another transaction, the downloaded excel file should be with out header line.
fro eg:
Report   : Zabc                      ABAP Development          Page :     1
Run Date : 12/14/06                                                     System: UD400
Run Time : 08:45:37
this header details should not be downloaded into the excel file.
could somebody help me please.
thanks
deepu

hi jayanti,
thanks for your response.
i have delclared all the field types as character but still it is not downloading and it 's sy-subrc is 4... the code is as below.
*field names
lt_fieldnames-value = 'Material Number'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Plant'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Group'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Description'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'UOM'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Price Unit'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Material Type'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'X-Plant Status'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Valuation Class'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_avmng.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_avntp.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Latest PO Qty'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Latest PO Cost'.
APPEND lt_fieldnames.
lt_fieldnames-value = 'PO Creation Date'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_fcaqt.
APPEND lt_fieldnames.
lt_fieldnames-value = 'Prev. Yr. Std. Cost'.
APPEND lt_fieldnames.
lt_fieldnames-value = lw_stcst.
APPEND lt_fieldnames.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
    EXPORTING
      file_name                       = 'XLSHEET'
    CREATE_PIVOT                    = 0
    DATA_SHEET_NAME                 = ' '
    PIVOT_SHEET_NAME                = ' '
    PASSWORD                        = ' '
    PASSWORD_OPTION                 = 0
    TABLES
    PIVOT_FIELD_TAB                 =
      data_tab                        = t_output1
      fieldnames                      = lt_fieldnames
    EXCEPTIONS
      file_not_exist                  = 1
      filename_expected               = 2
      communication_error             = 3
      ole_object_method_error         = 4
      ole_object_property_error       = 5
      invalid_pivot_fields            = 6
      download_problem                = 7
      OTHERS                          = 8
IF sy-subrc <> 0.
    MESSAGE e001 WITH 'Data could not be downloaded'.
ENDIF.
ENDFORM.                               " z_dwn_xl
thanks
deepu

Reports hung on 9ias Rel2 with MissingResourceException

Similar Messages

Maybe you are looking for