Reports in PS--- very urgent

Hi folks
i just wanted to know that whr can i pull up the SAP Standard report for any Project in PS, in whichi can fined actual/budget/variance value in US$ and CAND together.
pla show the menu path or give T-Code for that.
Thanks

CJI3 would be usefull

Similar Messages

OTN TEAM Please respond-matrix reports row limitation(very urgent)

Hi ,
using with matrix reports for delimited reports what's the maxmimum row limitation for text and excel?
thanks in advance.
please advice asap.
thx in advance.

See response in OTN TEAM Please respond-matrix reports row limitation(very urgent)

Report painter problem very urgent

Hi to ALL,
I have prepared two reports of cost centre through report painter. The format is proper is both the reports. The set is also correct and values in set(i.e cost centres) are also properly
but when we execute the report one report is being executed properly while other shows zero values. only when i doubleclick on zero amt and go to plan line items then it shows me values for that particular row in report.
Why is it so? what is solution to it? can it be possible that my tables are not correct. Ia m using CCSS table.
Pls this is very urgent
Thanks in advance
Tanuja

Hi
Can you check one thing...after selecting the zero you are getting the line item...chekc the total of that items...if it is coming zero..then no problem.
If not you can check in the no.format of that report. If you select the lacs format and your amount is below ten thousand...you will get the zero value only
VVR

VERY URGENT!! How to Pass a "% " symbol from form to Report

Hi
I am using oracle 10g and passing a symbol "%" as a parameter to the report from a form. But it shows error as follows:
REP-52006: Failed to decode the specified URL PARAMETER1=%.
But it is working when it runs in the Report directly.
Then Why we can't pass the symbol "%" to the report from form.
Please reply me as soon as possible. IT IS VERY URGENT !!

Hi,
Try using a lexical parameter(&parm_1) for a string of values or a bind parameter(:parm_1) for a single value
Thanks,
Kimosabe

How to enable RFC and how to use it in Report..please tell its very urgent

Dear Techie's,
Please tell its very urgent..
How to enable RFC and how to use it in Report. ??
Virendra

hi,
pls chk any of these links.
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
rgds
Anver

Very urgent --pls help Report Painter Problem,

Hi to all,
I have created 5 operating expenses report by cost centres through report painter. some for full period , some for actual and sone for budget.
Under one set of that cost centre reports I have many subsets under which there are cost centre groups and then the cost centres.
I want to add one more set to existing set. I have added the set and set contains one cost centre group and their are also cost centres under it.
The table which i am using for cost centre grous is GLT1 and field is RCNTR and for cost centres it is CCSS and KOSTL respectively.
In the above procedure I have two queries.
1)even after adding the set and when i try to execute the report from T- code SERP it doesnot show my created set in variation.
2)Also even if it was showing the set earlier but report was showing zero values. When i clicked on zero amount a pop up arises for plan and actual values and when i clicked on plan values it had value of Rs 255000(for cost centres). then outside why this amount doesnot appears.
PLS THIS IS VERY VERY URGENT
Regards
TANUJA

I've just read this thread three times and I have absolutely no idea what you are doing, in what version, and what you are asking for help with.
Do you want to change the message type? If you do you MUST drop the queue and start over again from the beginning.
Do you want to enqueue messages?
Post your DDL and other relevant information or you are on your own. We can not guess at your issue.

Report Writer - '-ve' for a particular column - VERY URGENT

Hi
I have developed a report painter report which has 4 columns. Out of 4 columns, I have 2 columns which are based on formulae. Irrespective of the result, I need to display these 2 column values either "+ve" or "-ve".
Can anybody pls help me out in this regards.
IT'S VERY URGENT.

Murali,
Thanks for your response. I think i could not explain my problem clearly. Let me explain now.
Here is the sample output of my report painter report.
PLAN (P)     ACTUAL (A)    VARIANCE (C = A - B)      VARIACE % ( C/A *100 )
254              245                           9                              3.67
245              254                          -9                             -3.54
-245              254                       -499                          -196.45
245             -254                        499                          -196.45
If you see the output for 3rd and 4th columns, some values are +ve and some values are -ve. But i want output as follows:
PLAN (P)     ACTUAL (A)    VARIANCE (C = A - B)      VARIACE % ( C/A *100 )
254              245                           9                              3.67
245              254                           9                              3.54
-245              254                        499                           196.45
245             -254                        499                           196.45
Pls help me out.

Very Urgent! SAP Access via HCM Reports in Enterprise Portal 6.0

Hi SAP Experts,
it is very urgent.
When our Users execute Reports via HCM Reports in Enterprise Portal 6.0 and exit them via the Menu Button (Menu->List->Exit) in the Report result they can access SAP Backend via Easy Access.
My Question: Could we find out which Users and at what time they had accessed the SAP Backend via this gap?
Best Regards,
Nadin
I will reward Points!
Edited by: Nadin Schaa on Feb 12, 2008 9:48 AM
Edited by: Nadin Schaa on Feb 12, 2008 9:49 AM

Try these may be helpfull
U can find list of users in backend and also trancations codes they r accessing
SM04 -- u can find list of users
Regards
Krishna.

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Very Urgent..How to create a report Using SQ01 and Sq02.

Hi Friends,
It's very urgent.pl help me in generating a report using SQ01 and SQ02.
Help is appreciated.
thanks In advance.
Regards,
Nanditha.

Check out these links...
http://www.insightcp.com/res_15.htm
http://www.ams.utoronto.ca/Assets/output/assets/adhoc_2990830.pdf.pdf
Also, do basic search in this forum...you will find a lot of threads related to this.
SKR

The URL to run a Report stored in the Server-VERY URGENT

Hi ,
I wanna to know the url to run the report stored in 9iDS.
e.g. in earlier version we need to use the CGI scripts to do the work e.g. http://hostname:port/srwcgi60/rwcgi.exe?report=test.rep ..somethin like this ..but in 9iDS i m not able to get the url..when i do http://hostname:port/reports/ the home page of reports come thats it ...but how to run it ...
please its VERY URGENT..
thanx a lot..
Bhavna

hello bhavana,
how ru.
web.show_document('http://servername:port/dev60cgi/rwcgi60.exe?report=reportname&userid=username/password@databasename&server=reportservername&destype=cache&desformat=HTML');
put the above coding to a when-button-pressed trigger.
it will work.
http:\\servername:portname\dev60html\runrep.htm
this will give u the reports home page.
in that enter the report name and username and password.
this also will work.
looking forward to hear from u.
bye. take care.
natesh

Report -very urgent

Hi gurus,
Can any one check the code .Iam not getting the output correctly .some garbage values it is taking .Kindly check and reply me it is very urgent for me.
REPORT Z_MARPOSS.
TABLES : EKPO ,
         EKET.
DATA : BEGIN OF ITAB OCCURS 2,
       EBELN LIKE EKET-EBELN,
       END OF ITAB .
DATA : BEGIN OF ITAB1 OCCURS 2,
       MATNR LIKE EKPO-MATNR,
       TXZ01 LIKE EKPO-TXZ01,
       MENGE LIKE EKET-MENGE,
       WEMNG LIKE EKET-WEMNG,
       MOBMNG LIKE EKET-MENGE,
       END OF ITAB1.
   SELECT-OPTIONS MEINDT FOR EKET-EINDT.
   SELECT EBELN INTO TABLE ITAB FROM EKET WHERE EINDT IN MEINDT.
   LOOP AT ITAB.
   clear itab1-matnr.
   clear itab1-txz01.
SELECT MATNR TXZ01 INTO CORRESPONDING FIELDS OF ITAB1 FROM EKPO WHERE EBELN = ITAB-EBELN.
   APPEND ITAB1.
   ENDSELECT.
   ENDLOOP.
   LOOP AT ITAB.
   CLEAR ITAB1-MENGE .
   CLEAR ITAB1-WEMNG .
   SELECT MENGE WEMNG INTO CORRESPONDING FIELDS OF ITAB1 FROM EKET WHERE EBELN = ITAB-EBELN.
   APPEND ITAB1.
   ENDSELECT.
   ENDLOOP.
top-of-page .
write : 50 'REPORT FOR STOCK OF PURCHASING MATERIALS' .
uline .
write : /2 'MATERIAL.' , 13 sy-vline , 14 'DESCRIPTION', 60 sy-vline , 61 'TOTAL QUANTITY' , 78 SY-VLINE , 79 'DEL QTY' , 95 SY-VLINE , 96 'REM QTY'.
uline .
END-OF-SELECTION.
LOOP AT ITAB1.
ITAB1-MOBMNG = ITAB1-MENGE - ITAB1-WEMNG.
MODIFY ITAB1. "Update the Record
WRITE : / ITAB1-MATNR UNDER 'MATERIAL' ,
          ITAB1-TXZ01 UNDER 'DESCRIPTION' ,
          ITAB1-MENGE UNDER 'TOTAL QUANTITY' ,
          ITAB1-WEMNG UNDER 'DEL QTY' ,
          ITAB1-MOBMNG UNDER 'REM QTY'.
ENDLOOP.
thx & Regards,
sunder

Hi,
In your code you are appending new lines at two places and at the end you are trying to display all the four values:
SELECT MATNR TXZ01 ITO CORRESPONDING FIELDS OF ITAB1 FROM EKPO WHERE EBELN = ITAB-EBELN.
APPEND ITAB1.
SELECT MENGE WEMNG INTO CORRESPONDING FIELDS OF ITAB1 FROM EKET WHERE EBELN = ITAB-EBELN.
APPEND ITAB1.
For the above two Append Statement , Relate the four fields using modify statement in the second append using correct index values.
Regards,
Baburaj

Cannot display the Crystal Report from BW..very Urgent

Hello Friends,
We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
Service cannot be Reached
What has happened?
URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
Note
The termination occurred in system I12 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
I'm getting the above error could plz help me .. its very urgent task for us..
Thanks in advance for your valuable time...
Sreedhar G.

Hi Dinesh,
I started all the services and i checked the Test service of ICF its giving the same above error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
Any help...
Message was edited by: sreedhar Gunda

Very urgent-Report

hi,
i have a product and i am saving like that in my ods. and then it goes state wise
ODS
exp. mumbai
PRODUCT----
total
pepsi -
10 botel
coke----
20 botel
fanta----
30 botel
now i want to show in the report like that
pepsi--cokefanta-market share pepsi-----coke and so on
10--2030--
16% -
32% and so on
its very urgent kindly do help me

The way that appears in my head is make RKF for each product. A total one and then make CKF with percent of calculations. This would be hard if you dont' know all the products and be a lot to maintain. This is unless you have it the way you listed where you have pepsi, fanta, coke, etc and have limited products. Beyond that I think you would have to do it outside the report.

Logic for Refreshing the ALV Report (Very Urgent)

Hi Experts,
My ALV report needs a refresh button on the output.
The Refresh button should be available to allow user to keep this report on screen and refresh regularly rather than going back and running it again.
I am using Function modules and not OOPS Concept here.............As i am unaware of OOPS Please provide me solution in FM's Only.
Kindly send me sample logic for this, Very urgent if ur reply is helpfull.... u will be rewarded heavily.......................
THanks in advance.
Rajesh Kumar

Hi,
This mean to say that if you have a 'refresh' push button in your gui status, every time you press the button, the list should get refreshed.
In ALV, to refresh the table you have to call the method "refresh_table_display".
It has the syntax very similar to creating the table.
It has two parameters. In the first one, you can mention if you want to refresh only the data (the icons are not refreshed)
or
if you want to refresh only the icons around the grid (the data is not refreshed - this option is mostly not used in day to day applications).
the synatx is :-
call method grid (name of grid )->refresh_table_display
exporting
IS_STABLE = <STRUCT OF TYPE LVC_S_STBL> (THIS IS FOR DATA REFRESHING)
I_SOFT_REFRESH = <VARIABLE OF CHAR 01> (THIS IS FOR ICON REFRESHING).
Regards,
Bhaskar

Reports in PS--- very urgent

Similar Messages

Maybe you are looking for