Reports iview (no link display when using mss id)

Hi experts,
I try to add new reports to MSS Reports Iview
I have configured the reports in SPRO ->Personnel
Management -> Manager's Desktop -> Enhancement of Function Codes ->
Define Function Codes,Define Object Type_Specific Function Codes, and
Define Structure of Function Codes.
After that i can see the report through fpb_launchpad_cust and can
preview in portal (using administrator).
But when i login to portal using the mss id, i cannot see the link in reports iview.
Is there any other configuration i need to do?
Thanks for assistance,
Nanie Arianie

Hi Anil,
The standard mss report iview (com.sap.pct.hcm.rpt_reportselection) is link to page which i created.
For your info, the MSS user is already using the reporting page. I just need to add one new reports under Time Management.
Is there any other configuration besides define function codes in Manager's Desktop?
TQ.
Rgds,
Nanie Arianie

Similar Messages

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Using Slide Tool No two up display when using keyboard shortcuts

I've noticed when using the slide tool using my mouse, I get the two up display in the canvas the way I'm supposed to, where it shows me the new out point on the left frame and the new in point on the right frame. However if I select the clip and then use the left and right brackets to move the clip, I don't get the two up display in the canvas like if I was using the mouse.
Is this normal, and if so, is there a way I can see the two up display when using the keyboard to slide? thanks.

Is this normal?
well the 2-up is activated by the mouse click and when you trim from the keyboard there's no mouse click ... so yes, this is normal
is there a way I can see the two up display when using the keyboard to slide?
good question. am not in front of an FCP station right now but if i were i'd be clicking around trying to find if it was possible some way

If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
will that help?

When you use your GPS does your iPhone get hot enough to shutdown? The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours. My iPhone got hot, but didn't shutdown.

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Linking errors when using ibsta

Hello,
I have been trying to write C code to automate a Keithley 2410 through GPIB. I am using Windows XP 32-bit, and VC++.
I believe I was successful in getting a handle to the gpib-32.dll. However, I am getting a linking error when I try to use ibsta: 1>helloworld.obj : error LNK2001: unresolved external symbol _ibsta
1>C:\Documents and Settings\Prober\My Documents\C Programs\helloworld\Debug\helloworld.exe : fatal error LNK1120: 1 unresolved externals
However, when I look through the ni488.h, I see that ibsta is a global variable. Therefore I am confused as to why I am getting a linking error
I am following this guide: http://na.tm.agilent.com/pna/help/latest/Programming/GPIB_Example_Programs/GPIB_using_Visual_C++.htm
My code is attached
Attachments:
code.c ‏3 KB

Check out the 4882query.c example located on your computer at National Instruments > NI-488.2 > Examples > Standard C > 4882query. The National Instruments folder might be in a sub-folder of Public or Public Documents. Look at the ReadMe.txt file first. It contains a C++ section. Then try compiling the example and see what happens.
Jeff Munn
Applications Engineer
National Instruments

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Custom ContextMenu doesn't display when using hand cursor

I have created a custom ContextMenu, which displays when
right-clicking on the Canvas. If I am showing the hand/pointer
cursor using the code below, and then right-click, the custom
ContextMenu is not displayed. Is this a known issue in Flex 3 or is
there a workaround/fix? Any help is always much appreciated.

"Guddie" <[email protected]> wrote in
message
news:gmcq28$eb$[email protected]..
> Setting buttonMode = false or mouseChildren = true does
not fix the issue,
> and I do need useHandCursor = true.
Make sure you haven't inadvertently set mouseEvents to false.

How to find related User commands when Use MSS PCR scenarios

Hi
We are using MSS PCR Senarios with Web dynpro Business package.
How to know which command is fired when click on buttons PCR web dynpro screens like "Sumbit" "Resubmit" buttons.
is there any document which tells about the all the standard buttons and its corresponding user commands in R/3 to handle in BADI.
I have gone through the ISR cook book but not find much information
Thanks in Advance
Gopal

Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
Best,
Björn

Turn off LCD display when using second monitor WITHOUT closing lid

I am wondering if there is a way to turn off my macbook's LCD monitor when using a secondary display without closing the lid. I end up having to close the lid, wait for it to sleep, moving moues, and then reopening the lid so it doesnt overheat, and that's alot of work when most windows machines just offer a display setting to accomplish the same thing.
Does anyone know of a terminal command that would disable the primary monitor?

Ilya Batikov wrote:
I am wondering if there is a way to turn off my macbook's LCD monitor when using a secondary display without closing the lid. I end up having to close the lid, wait for it to sleep, moving moues, and then reopening the lid so it doesnt overheat,
It is designed to work with the lid closed and it will not overheat. I do it all the time and have not noticed a rise in temperature because the lid is closed.

Need menu bar on BOTH displays when using external monitor

How can I have the menu bar on BOTH displays without using the "Mirror Display" mode???
I bought a Thunderbolt and use it with my MBA. It works fine overall but this is still like having one display instead of two. A real downer!!
There are 2 modes:
Mirror Displays: (identical screen: why waste valuable screen realestate?)
"Normal" mode: where it gives you access to the 2 monitors independently (you can move apps. windows and locate them on any screen you want).
In the "Normal" mode, you can move the menu bar from one display to the other but it does not resolve the problem. We need TWO menu bars, which work identical and can be used on whatever display the mouse cursor happens to be.
Currently, let's say I have applications A & B displaying on MBA, applications C & D displaying on TB, and the Menu Bar on TB. It is a nightmare to work!!!! Anytime I want to work on A or B I have to move the mouse side way to get to the MBA, then to use the menu, I can't even move up into the TB all the way to the menu bar: I have to move through the side onto the TB then up to the menu bar, select, down through the TB, side way to the MBA, and on and on and on....
Anybody knows how to duplicate a functional menu bar without Mirror Display?
Anyway of simplifying this nightmare?
Thanks

I asked the same question a few days ago, got some other options then ...
https://discussions.apple.com/message/16953617#16953617
Many many things to try ...

Images not displaying when using Mod_JK

Has anyone had this problem with any success?
platform:
Windows 2000 Professional
Jakarta Tomcat 4.1.3
Apache 2.0.039
Mod_jk connector
My_Sql 4.0.1
I have a successful connection between Tomcat and Apache via the mod_jk module.
All JSP's are displaying with the appropriate data from MySql.
My problem is that no images will display when I connect through Apache, via port 80.
When I connect to Tomcat direct through port 8080, everything displays properly including images.
Currently, I am running my application under Tomcat's webapp subdirectory.
Is there something that I perhaps not did properly configure with Apache's http.conf file or with
server.xml?
Any suggestions or answers would certainly be appreciated.
Thanks,
Lenny Sorey

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

How to get Iview Quick link displayed in a headless window

Hi
I set the quick link for a iview, the iview has the Launch in new windows property set to 'Launch in a separated headless portal window', However when I run this iview's quick link URL, it always open in a portal content area with all the header and navigation bar beside. How can do to have the quick link open in a headerless windows. Thanks.
Cecilia Huang

Hello,
seems this is still not solved, even in 7.4 portal.
Maybe some other Portal Admins out there have an idea?
Everyone can reproduce the issue like this:
Make an URL iview pointing to http://www.google.com
Set Quicklink to google ( so it will be /irj/portal/google )
Set Launch in new window: "Open in separate window".
Add the iView to a role you have.
Test:
Call the iview from the navigation inside portal. Effekt: The browser opens a new window and shows http://www.google.com . So this works as expected.
Call the quicklink <yourportal>/irj/portal/google . The portal tries to launch the http://www.google.com inside the content area. In this case I get the error message that "Content cannot be displayed in a frame"
I think a lot of Portal admins would like to get this working as they could use Quicklinks more heavily.
Question to SAP: Is this intended behaviour ?
Regs
Ulf
By the way:
Does anyone know how to list all quicklinks available in the PCD ? I tried with the PCD Inspector, but did not succeed.
C U @ #teched_2014

Help topics are not displaying when using Windows 8/IE 10

I have a WebHelp system created in RoboHelp 7. When opening that Help from our application using Windows 8 with Internet Explorer 10 and allowing blocked content, the Help topics do not display in the right pane when clicking a topic from the Contents in the left pane. Below are the steps:
1. Open the Help system from the Help menu within the application.
2. The Allow Blocked Content displays and I allow it.
3. The Help opens and if I click a topic from the TOC in the left pane, the topic doesn't display in the right pane.
A workaround we found was to widen the left pane and the topic then displays. Also, if you don't allow blocked content, this issue doesn't happen. However, I need to allow blocked content in order for PDFs within the Help to open properly and also because the Search doesn't display without allowing blocked content.
We also tested this with a Help system that was created using Robohelp 9 and have the same issue. I'm wondering if RoboHelp 10 would solve this problem.
Does anyone know if IE 10 requires Help systems to be created in RoboHelp 10 to work properly, at least when allowing blocked content?

It seems to be time for the old divide and conquer approach.
Zip up the project so you have a copy that cannot accidentally be opened and worked on. That gives you a copy that you can safely revert to later if needed. Save the zip file somewhere safe.
Then create another copy of the project so that you have two copies that can be worked on.
Open Copy 1 and delete half the topics. Ignore any broken links reported. Generate the help from that copy.
Open Copy 2 and delete the other half of the topics. Generate the help from that copy.
It should be the case that one copy is now OK and one still has the problem.
Trash the good copy and then create a second copy of the copy with the problem.
Repeat the process until you have located whatever is causing the problem.
The process takes less time than you might think.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Reports iview (no link display when using mss id)

Similar Messages

Maybe you are looking for