Reports MB5W / MB5L are not displaying the individual material lines

Hi All,
We are encountering a problem in MB5W/MB5L reports. When we are executing these report with the option checked "Display Indiv. Material Lines", system is not displaying the details material wise.
It is just showing the GL wise value of Material ccy and Stock account ccy. It was running fine when we ran the same reports in Feb for Jan 2014.
Do you have any idea why system is behaving like this please?
Thanks,

Hi Narasimhulu,
In report MB5W/MB5L, click the "Current display variant icon" in the next pop-up screen click the position tab and check whether all the material related fields are added or not. If not, move the fields into display list and then check.
Thanks

Similar Messages

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office

You should probalby post your question on Microsoft's own forums for their Mac software since it's their stuff you're asking about:
http://answers.microsoft.com/en-us/mac

Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

'''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
 
'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (aka Reader X)
**More info about version 10 (aka Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

Crystal Report in InfoView is not displaying the parameter

Cheers All,
We have a Crystal Report which is connected to the BEx query. We also have parameters based on variables in BEx.
When we run the report directly from Crystal, everything is fine.
However, when we run the report from InfoView, when I click on the "..." button beside the parameter to make the selection, everything hangs up.
This (static) parameter is based on a variable which is based on a compounded characteristic 0ASSET_AFAB.
The compunding keys are :1) Company code 2) Asset 3) Sub-asset.
The user is providing the Company code in another parameter, but the user is not providing the Asset, nor the asset sub-number... so all the iterations of asset/sub-asset/depreciation area are displayed - and this works at BEx level, and it works when the report is run directly from the Crystal Reports, however this does not work when the report is run from the InfoView.
What would be the best course of action?
Regards,
Dmitriy

Hi Rajiv,
In OIM 9.1 we are using the stored procedure to get the values for all the fields.In the stored procedure we are using the cursor to store the list of values but in the BI Publisher we are using the SQL queries to retrieve the values for the fields in the report. In sql queries we are unable to handle the list of values for the fileds like User Groups and Resources provisioned/deprovisioned.
Please let me know the process even if we can get list of values for the fields using the SQL queries.

Object Id on the Decision Report List applet does not display the Object Id

The Object Id field of the Decision Report List Applet displays either the entity name of the entity name - Id. We wouldlike to dispay the siebel row Id's in that field respectivey for the parent or the child or grandchild entities.Please help with h to go about it.
If the base entity is declared as global in OPM, then global gets displayed in the Object id. If a siebel entity is declared as an entity in OPM then entityname - Id gets displayed.
Thanks !!

Unfortunately the decision report comes from deep with the engine and there is not much you can do to change it.
However, the Decision report is XML which is then modified by an XSLT for display in Siebel. You could have a look at the style sheet and the original XML and see if there is a way for displaying the XML that might be more suitable for your purpose.
The xslt is decision_report.xslt and can be found in the siebsrvr\XSLT directory.
Cheers
Frank

In Mac OS X Mail some emails are not displaying the correct font size.

I have set my Mail to display email messages (Inbox) to Courier 13 point (easy to read) and most messages are displayed that way, however I often get emails that are displayed in unreadably small and often colored type. I don't understand why this is ... could someone explain how to fix this? Thanx.

The email was probably sent from Outlook as RTF or HTML. You can tell Mail to display those as plain text as well by opening Terminal and typing this command (quit Mail first):
defaults write com.apple.mail PreferPlainText -bool TRUE
See http://www.hawkwings.net/2005/09/27/viewing-html-messages-in-apple-mail/ for more information.

Report Writer not displaying the column heading correctly.

Hi,
We have generated the report writer using the transaction GR55 by logging in EN language.
But when we executed the report, column headings are not displayed properly, instead it is displayed some thing like $ZR07##ZCO-OI# $.
Please help us in solving this issue.
Regards
Shibin

Hi,
Problem solved. We need to generate the report writer in original language only and it will reflect in other languages. Directly if we execute in other language it will display correct headings.
if we generate in other language it will display wrong heading even in original language also.
So generate report writer in original language only
Regards
Shibino.

Some of my emails are not displaying images. When I click within the email, the webpage is the same. How can this be fixed?

I use hotmail and the problem only happens with certain emails, like Homedepot and Redbox. Within the email, it states "Having trouble viewing this email? Click here.", but when I click this, the same problem persists, no images displayed. These are the only two I have noticed that are not displaying the images. Please help. Thanks

Hello riopeltravel, let's solve this mystery! What make & model phone do you have? Also, have you tried deleting the email account off of the phone and re-adding with the username and password? How long have the email accounts stopped working? Keep us posted!
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Ipod nano does not display the picture covers

Hello, I have a 2nd generation nano. I used to "associate" a picture (the album cover) with the song files in itunes and they were displayed in the Nano.
Suddenly the nano stopped to display the pics. I deleted all the songs and put them again and I reseted the nano and now even the old files are not displaying the pictures, although itunes displays them correctly.
I hope I didn't mess too much with the explanation. sorry.
Does anybody know how can I see the covers again?
Thank you.

If you are using iTunes from version 7 onwards, then when you connect the iPod the summary screen should automatically open.
If you click on the 'music' tab, you will see the option to:
"display album artwork on your iPod".
Make sure it's still selected.

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
 I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
 CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
 METHODS:
 display IMPORTING l_table TYPE string
 l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
 CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
 DATA: gr_table TYPE REF TO cl_salv_table.
 DATA: gr_columns TYPE REF TO cl_salv_columns_table,
 gr_column TYPE REF TO cl_salv_column_table,
 ls_fcat TYPE slis_fieldcat_alv.
 DATA: gr_display TYPE REF TO cl_salv_display_settings.
 DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
 l_field TYPE string.
 FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
 <ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
 ASSIGN (l_table) TO <fs_table>.
 ASSIGN (l_fcat) TO <ft_fcat>.
 TRY.
 cl_salv_table=>factory(
 IMPORTING
 r_salv_table = gr_table
 CHANGING
 t_table = <fs_table> ).
 CATCH cx_salv_msg. "#EC NO_HANDLER
 ENDTRY.
Add basic default functionality in the ALV report
Functions
 l_o_functions = gr_table->get_functions( ).
 l_o_functions->set_all( abap_true ).
 gr_columns = gr_table->get_columns( ).
 gr_columns->set_headers_visible( abap_true ).
Display the list
 gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
 get_storecodes USING p_stfile
 CHANGING it_t001w,
fetching mard data
 read_mard_data,
preparing fieldcatalog for Final Data
 create_filedcat USING it_t001w
 it_site
 CHANGING it_fieldcat,
preparing structure & internal table for Final Data
 create_final_table_structure USING it_fieldcat,
prepare output data
 prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
 display_data USING l_table
 l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
 CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 i_line_header = 'X'
 i_tab_raw_data = lt_raw
 i_filename = p_p_stfile
 TABLES
 i_tab_converted_data = p_it_t001w[]
 EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
 LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
 l_index = sy-tabix.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = <fs_t001w>-werks
 IMPORTING
 output = <fs_t001w>-werks.
 MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
 IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
 append site to ranges
 CLEAR rs_site.
 rs_site-sign = 'I'.
 rs_site-option = 'EQ'.
 rs_site-low = <fs_t001w>-werks.
 APPEND rs_site TO rt_site.
 CONTINUE.
 ENDIF.
 ENDLOOP.
 SORT p_it_t001w BY werks.
 SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
 p_it_site LIKE it_site[]
 CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
 'MTBEZ' 'CHAR' '25' ,
 'MATKL' 'CHAR' '6' ,
 'WGBEZ' 'CHAR' '20' ,
 'MATNR' 'CHAR' '18' ,
 'MAKTX' 'CHAR' '30' ,
 l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
 'Divsion Description',
 'MC Code',
 'MC Description',
 'Article',
 'Article Description',
 l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
 READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
 BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
 <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
 CLEAR : l_fieldname, rs_site.
 l_fieldname = <fs_site>-werks.
 prepare fieldcatalog
 PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
 create header for excel
 PERFORM create_excel_header USING l_fieldname .
 CONTINUE.
 ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
 p_datatype TYPE datatype_d
 p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fieldcat
 IMPORTING
 ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
 l_werks LIKE g_werks,
 l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
 l_index = sy-tabix.
 IF l_matnr IS INITIAL.
 l_matnr = <fs_mard>-matnr.
 CLEAR : l_werks.
 l_werks = <fs_mard>-werks.
 UNASSIGN : <fs_value>, <fs_final>.
 Create dynamic work area and assign to FS
 CREATE DATA t_line LIKE LINE OF <ft_final>.
 ASSIGN t_line->* TO <fs_final>.
 ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mard>-matnr.
 ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_value> + <fs_mard>-labst.
 getting Article Type,MC & its Descriptions
 PERFORM get_other_data USING l_matnr
 l_werks.
 ELSEIF l_matnr <> <fs_mard>-matnr.
 APPEND <fs_final> TO <ft_final>.
 CLEAR l_matnr.
 l_matnr = <fs_mard>-matnr.
 CLEAR : l_werks.
 l_werks = <fs_mard>-werks.
 UNASSIGN : <fs_value>, <fs_final>.
 Create dynamic work area and assign to FS
 CREATE DATA t_line LIKE LINE OF <ft_final>.
 ASSIGN t_line->* TO <fs_final>.
 ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mard>-matnr.
 ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_value> + <fs_mard>-labst.
 getting Article Type,MC & its Descriptions
 PERFORM get_other_data USING l_matnr
 l_werks.
 ELSE.
 CLEAR : l_werks.
 l_werks = <fs_mard>-werks.
 ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_value> + <fs_mard>-labst.
 ENDIF.
 IF l_index = g_lines.
 APPEND <fs_final> TO <ft_final>.
 ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
 p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
 <fs_t023t> LIKE LINE OF it_t023t,
 <fs_t134t> LIKE LINE OF it_t134t,
 <fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
 ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mara>-mtart.
 ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mara>-matkl.
 READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
 ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_makt>-maktx.
 ENDIF.
 READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
 ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_t023t>-wgbez.
 ENDIF.
 READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
 ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_t134t>-mtbez.
 ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
 text
FORM display_data USING p_l_table
 p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
 l_fcat = p_l_fcat ).
ENDFORM. " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
 call method set_colname
 EXPORTING iv_tab = alv_tab
 iv_colid = 'xxxx' "fieldname from the table
 iv_stxt = text-t54
 iv_mtxt = text-t55
 iv_ltxt = text-t55.
METHOD set_colname .
data:
 alv_cols type REF TO cl_salv_columns_table,
 alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
 call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
 call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
 IF iv_stxt <> ''.
 CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
 ENDIF.
 IF iv_mtxt <> ''.
 CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
 ENDIF.
 IF iv_ltxt <> ''.
 CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
 ENDIF.
 CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

The Forms are not displaying correctly

the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge. Or open IECompatData.xml to see if you should have Compatibility View enabling Microsoft's list. Or report your problem symptom and
desired override here:
http://www.modern.ie/report-compat-problem
Ref:
http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
Robert Aldwinckle

Leading zeros are not displaying in the excel

Hi Experts,
Leading zeros are not displaying in the excel
Here is the situation:
I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
Normally our material numbers will start with zeros.
But when I check the email excel file , leading zeros are not displaying.
Even I checked the application server (AL11) file, zeros are there.
I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
Could you please advise, how to display leading zeros to the material number in excel file.
Thanks in advance
Raghu

Application server file showing zeros infront of the material number.
1200# 0012401387# XXXXXXXX
Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
I checked custom FUNCTION MODULE . No mistakes in that.
===
Sudhir,
As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
Application server file showing like below
1200# '0012401387# XXXXXXXX
===
Could you please advise anyone how can we acheive this.
Thanks

Chinese characters are not displayed in the Firefox bookmarks

Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.

No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

How can I restore my playlist folders in itunes? They are there but the individual song titles aren't listed. They are only listed by album. This makes it very difficult to find songs in my playlist. Also,when I click on music, it will not list options.

My itunes account is messed up. How can I restore my playlist folders in itunes? The list's are there but the individual song titles aren't. They are only listed by album. I can only see the song titles as they are played at the top of my itunes. This makes it very difficult to find songs in my playlist. Also when in the itunes store, I am not able to see music genre choices, or search for a song or group.
Thank you

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

Reports MB5W / MB5L are not displaying the individual material lines

Similar Messages

Maybe you are looking for