Reports Menu is not available in Websheet Application

Hi All,
I have installed APEX 4.2 in oracle 11g database 11.2.0.1.0 using Embedded pl/sql gateway method.
But When i am trying to create Reports in Websheet application, there is no menu name like reports.
Please help me to create reports in Websheet application.

In case Ankur Godre 's suggestion does not pan out then please contact SAP Jam support, via the Successfactors support site.
https://support.successfactors.com
Thank you.

Similar Messages

How to include private reports in any page for a websheet application

Hi,
i have created a websheet application, it has n number of data grids.
For some data grids i had created reports, which got classified as private reports by default.
i would like to display these reports in a page of my websheet application, when i create a new page i am unable to select any of the reports created by me. it only lists out primary report which is a public report.
any help towards this would be of great help.
thanks
srinivas p

Hello Ram,
e-recruiting customizing is (in most areas) devided into a sap delivery table and a customer table. When opening the IMG you only find the customer table which is empty as long you have not done any customer configuration yet.
The tables for startpage customizing (BSP) are named T77RCF_SP_*. The ones containing customer customizing contain a C in the name while the tables with the standard delivery are not. Example: customer table for start page groups T77RCF_SP_GROUPC, standard table T77RCF_SP_GROUP. Standard delivery content can be checked in SE11 or SE16.
You should not change the standard table contents. It is better to customize your own startpages based on the sap delivery. I personally recomment not to use the sap standard Ids for customer own links, groups and startpages as they overrule the standard ones and you cannot display them later.
To replace the icons on a standard page you should do the following steps:
- get the groups for the standard startpage from table T77RCF_SP_ASID
- get the links to each group from table T77RCF_SP_ASGRP
- create your customer groups in IMG, use 9XXX ids but copy the information from the standard groups found in table T77RCF_SP_GROUP
- adjust the ICON links
- add the links to your groups (you use the standard links here as you do not change them)
- create a customer startpage in IMG using 9XXX id. you can take the standard settings from table T77RCF_SP_ID
- assign your customer groups to the customer startpage
Best regards
Roman

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Report-Service is not available: REP-110 und REP-1070

Hello,
I get the following errors after new configuration for Froms, Reports and Discoverer (11.1.1.6):
FRM-41214: Unable to run report
Or:
REP-110: File 01RD_MARG_04E. cannot be opened.
REP-1070: An error occurred while opening or saving a document.
The Report-Server is in Running state, but Report-Service is not available.
How can I isolate the error position?
Thanks in advance,
Mohammad

Just out of curiosity, what did you change in opmn.xml?
Oh, I see in the doc now. That the same thing can be inserted in opmn.xml. But I have never seen
that done in any production environment I have encounterd.
I find that document a little bit strange, to be honest. Is that really the way to configure the Reports Service?
It is so very strange that they do not mention the env-id possibility in the rwserver.conf file.
The REPORTS_PATH is gotten from either registry, that is, the default for the host if you so like, or envid in the call to reports service via the URL as a parameter, ie. &envid=test. That envid can also hold
variables like NLS_LANG and such.
I regard the opmn files as do-not-touch and part of the WLS system structure.
I seldom touch the reports.bat-file. But maybe that was necessary in this case. I do not know.
Edited by: Lars Sjöström on May 31, 2012 5:03 PM

The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.

Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

This User Profile Application's connection is currently not available. The Application pool or user profile service may not have been started

Hi, we had installed SharePoint Service Pack 1 (SP1). And now the user profile service application is not available. Getting this
Error "This User Profile Application’s connection is currently not available. The Application pool or user profile service may not have been started".
How to troubleshoot the issue anh help/thoughts will be appreciated

Not sure, if this will help, but in my case all of my services were up and running (including app pools) and also IISRESET did not help. So at that point, looking at the error message, I assumed that there is something wrong with the app pool (or app pool
credentials) and went to CA --> Application Management --> Manage Service Applications and selected UPSA and under properties just created a new app pool to run under farm account (did not want to take any chances).
As soon as the new app pool was provisioned, the service came back.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

Roboto font not available in certain applications and Openbox menu

I have downloaded Roboto TTF font from here and saved it in ~/.fonts.
After downloading it, I ran:
$ fc-cache -vf
After that, I changed the font in lxappearance and obconf and every single application I have tried so far uses it by default now except Openbox menu (window titles seem to work just fine) and Geany.
What can I do to fix this?
I really like the font and pretty much everything runs well except those two.
Note: tried placing those files in /usr/share/fonts/local, but nothing changed.
Last edited by COPE (2013-11-04 07:35:17)

Tried to switch fonts in terminal (rxvt-unicode) and apparently that font is not available there either.
Any ideas?

Cisco Presence Server 8.5 Application - Cisco Jabber menu option not available

                   Dear Support,
                   I am trying to configure cisco jabber with Presence Server 8.5. All the documentation indicate that jabber option in Presence must be configured in the Application -> Cisco Jabber menu, however this menu option is not available in my Presence Server. Anyone know why this is happening? I am using CUCM version 8.6.1. I installed the jabber client for windows in two Windows 7 machines and I have presence and IM funcitonalities but I can not make calls or activate other features like video, desktop sharing and so on.
                    Any help would be really appreciated.
                    Best Regards,
                    Roberto López.

Thanks a lot for pointing me to the right direction.
Just one more question. After installing jabber for windows on a couple of laptops and signing in, the call option (right click on contact or telephone icon located right to the contact) is not available right away meaning that I have to wait a long time for it to appear or if I start a call from the "search or enter number to call" field then all call button and options are enabled. Do you have any idea why this could be happening?
Best Regards,
Roberto.

"Always Available off line" menu item not available for user on computer where another does see it. This is on Active Directory Computer

I have a lap top that I want to add files via Always available off line.
When I logon and right click on a folder share I can see the menu item all was available offline. When the user logs on this option is not available. I have turned the feature on and off, rebooted, I have deleted the cache folder but I cannot
see how to get this menu item to show up. It's odd that it shows up for one user but not another on the same computer. I have searched the web and tried the above things and others but cannot seem to resolve this problem. It seems pretty
common and their. This computer is on a domain.
thanks.

Hi,
So as we edited the group policy settings in the default domain policy, the menu item is now available?
And as we are in a domain environment and the settings is configured under the default domain policy, how the domain users behave different from each other? Which someone could see and the other not？
Could we please generate a
GPO report to take a check?
And regarding group policy issue, it is recommended to seek help in the group policy forum, experts there may share some insights:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
Best regards
Michael Shao
TechNet Community Support

Crystal Report: irregular error not handled by the application component

Hi all,
The error message u201Cirregular error not handled by the application componentu201D comes up when I run any of the Crystal Report in the SAP Business One.
But this error happens only in the client Machines, from the Server I can run the report normally.
Thanks and Regards,
Alberto Franç

Hi,
It seems installation and registration problem, have you tried to other client computers? Try to reinstall the Crystal Report in client.
Regards,
Clint

Crystal Report menu-item not visible on SAP menu of client

SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay Audich

Hi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks.

Menu option not available in SAP GUI transaction in Portal

Hi all,
When accessing SAP Transaction iview via the portal 7.31 the drop down menu option is not available in the first session.
It is available in the second session and when accessing SAP Traansaction directly from the SAPLOGON pad, the option allows users to open other sessions and stop transactions.
How can we enable the menu option in Transaction iview in Portal?
Plz find the attaches screen shot of error.

Hi Chandra,
Can you try the same senario with broswer compatible mode?
Because these function will be over ride the style sheet.
Thanks
Patrick

"Application not available" for every application ...

I'm hoping this is an easy one...
I have a Lumia 710 with the latest software. I reinstalled the OS on my laptop, and reinstalled Zune. I connected my Lumia and change the sync partnership type from Guest and everything looked OK.
Since then, when I connect to the App Marketplace and irrespective of what application I select, I get the message "Application not available. This might be because your phone software needs to be updated..." message.
Any ideas on how to fix this?
Thanks a lot for your help,
Iain

If you go to Microsoft store on your PC and you sign in with your Microsoft account you should be able to select apps and install them to the phone without the need of Zune. If this works and you can also install apps directly on your phone I'd contact Microsoft Store Support for further assistance.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Menu bar not appears in some applications.

Hi, all!
I have a strange problem and really need help:
top menu bar not appears, when i start some applications.
For example, Numbers, keynote, quicktime and, in the end, Finder!
Problem solves when i replace the .app file of the application with the file from another computer, but it appears again with another application. No errors, no messages, just no menu bar in the top.
I don't know why it happens and don't know how to diagnose this problem.

Sometimes something as simple as restarting the computer will resolve system quirks. If that does not work, boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

Data entered by ITS application partly not available at BSP application

Environment:
We have an old ITS application to enter absences and presences to SAP HR.
And we have a new BSP application to delete absences and presences.
Both applications are available for the employee in an employee self service, that has an navigation developed with BSP.
Problem:
All data entered with the ITS application, could not be deleted in the BSP application, if the user does not log off. Or until he deletes one dataset, that he did not entered after the current login. If he deleted one old dataset, all new datasets can also be deleted.
The ITS application stores the data with the function HR_MAINTAIN_MASTERDATA.
The BSP application deletes the data also with the HR_MAINTAIN_MASTERDATA function.
But its strange, that I can read the newly entered data with select from the Database or the function HR_READ_INFOTYPE. But when the users selects this dataset, the BSP class currently read, the HR_MAINTAIN_MASTERDATA cant delete, because of the message "no data in timeperiod". Even the function 'BAPI_ABSENCE_GETDETAIL' reads the data.
Seems to be some kind of buffer problem. Reading the data is possible, but trying to modify/delete does not work.
Also this did not help:
*using more commit works.
*Try to initialize buffers with the functions "HR_INITIALIZE_BUFFER", 'HR_PSBUFFER_INITIALIZE', "HRPAD00_FREE_PLOG_TAB" or "HR_PSA_CLEAR_BUFFER"
Trying to delete the absences with the function 'BAPI_ABSENCE_DELETE' instead of the HR_MAINTAIN_MASTERDATA function (without DESTINATION and with DESTINATION 'NONE').
Does anybody has an idea, why my BSP application works fine with all datasets, entered before the current login, but can not delete datasets I newly entered (but I can read them, I only cant delete them!). And what is more strange: after I delete on old dataset, then I can delete also the new datasets!

Is your provisioning profile for Development or Ad-Hoc distribution?
Also, it would help if you posted a screenshot of you target settings as well as your Info.plist file.

Reports Menu is not available in Websheet Application

Similar Messages

Maybe you are looking for