Reports migration 6i to 10g

Hi,
I am having a report in 6i where i used drilldown report in it. where i was able to run the report from another report. But when i migrated same report to 10g i am unable to do so...
Is there any workaround..
Please help me..
Thanks,

HI
if u wanna run ur Drill down report in 10g then user hyperlink for open Drilldown report
Rizwan

Similar Messages

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Migrate reports from 6i to 10g

Hello friends,
I want to migrate reports created in oracle 6i report builder
to
oracle 10g.
Please give me steps for that.
Arvind2

It happens on all machine. We use browser to launch the application and the report is called from forms (10.1.2). We didn't change any code in report and neither the fonts (Tahoma). In 6i, client server environment, windows can find the font. I guess in 10g web environment, the font is not as default. HP Laserjet 8000N is a network printer which I use to testing my report. everything is fine in 6i but not 10g. Here is my question.
1. How to check printer setup? Should I use the default font from Linux instead of Tahoma?
2. I found a note in metalink, Note:356221.1 which explains the procedures to deploy reports from windows to Linux. I am not sure my problem is related to the font or something else...
Thanks for you reponse.

Migrate report template 6i to 10g

Hi All
I am working on Oracle Report 10g.
but in my company I have one old template which was made in 6i.
i have question that how to Migrate report template 6i to 10g?
i have read in forum that i just have to compile template into 10g report. is that right answer or not i just want to make sure.
Thanks In advanced for your Answer.

The easiest way to find out is to just give it a try. ;-)

How to Migrate Oracle Portal 10g on Linux to Oracle Webcenter Portal 11g (11.1.1.6)

Hello friends,
I am a new on this topic. I want to migrate Oracle portal pages on 10g to Oracle webcenter portal 11g (platform is also different linux to windows)
Action i have already taken--- On new box i have installed Oracle webcenter 11g (Weblogic+Oracle Forms +Oracle Reports). Oracle Forms and Oracle Reports are also customer requirement. Thease stuffs are working fine.
Need to be done-- I need to migrate production portal pages to 11g new environment for testing
Please give me the suggestion, how to procced on this.
Regards,
Vivek

Hello Vinay,
Thanks for the update. Actually my scenario is ---
1) Oracle Portal 10.1.2 is running in prod. (Prod is linux environment and new environment is windows)
2) Customer requirement is they want to run this oracle portal on Portal 11g (Webcenter)
3) Database migration is not required, they will connect to prod database from new new Oracle 11g Portal.
4) They want only migrate the Oracle 10g portal pages to Oracle 11g Portal
As i am new on that, so please suggest me solution, how to do this. How i can put oracle 10g pages to Oracle 11g Portal (As tnsentry will work to connect prod database)
Please suggest me solution step be step if you have.
Thanks in advance
Regards,
Vivek

Massive Report Migration

Environment:
Web Analysis 9.2 on an AIX 5.3 Server
Oracle 10g
Issue:
Currently we have about 500 reports on a Web Analysis server (Development) and we are trying to migrate them to a new server (Production).
We need to make a massive report migration, since there are a lot reports, with a method different than Export / Import option with each report or report folder.(manually)
We wonder if there is any other alternate procedure to migrate the reports massively, such backing up the oracle 10g database or any other different method.
Any help or idea is highly appreciated.

Hi,
you can achieve your target with LCM utility in 9.3.1
LCM utility is available from 9.3.0.x
but it performing well with some enhanced feature added in 9.3.1.X
Thanks
Dhanjit G.

Catalog Migration Problem from 10g to 11g

Hi,
When i am trying to migrate catalog of 10g to 11g. They have some problems
1. In obiee 10g (under root folder) it shows only around 5 dashboards. But actually when i am seeing in the I catalog manager of obiee 10g it shows 12 dashboards and pages.
Can some please help me on this how to see the other dashboards and page in obiee 10g ( under root folder ).
2. When i am trying to migrate the catalog folder in obiee 11g it also shows around 5 dashboards. And other dashboards are not seeing after migration.
Can someone please help me on this how to see the other dashboards and pages in obiee 11g as well.

Hi,
In Webcat, there can be some contents that are inconsistent/invalid. And such contents have 0 byte size. Please check if dashboards files that are not visible and their corresponding .atr files have 0 byte size.
Other possibility can be dashboards are hidden for the user-id you are using for login.
Please mark as helpful/correct if this reply helps.
Thanks,
Vijay
Edited by: user5814724 on Apr 8, 2013 4:58 AM

Query Regarding Updation/Migration of ODI 10g To ODI 11g.

Hi All,
Currently I am using ODI 10g Version & Repositories ( Work & Master) have been installed on Oracle database version "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi"
We are thinking to migrate from ODI 10g to ODI 11g Version 11.1.1.5 & i have some queries which are metioned below.
1. Can we install ODI 11g Version 11.1.1.5 version with Repositories ( Work & Master) on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi" or do i need to upgrade my database version to 11G?.
2. If yes then, Can i upgrade or use exting Repositoires ( 10g one) for ODI 11g OR i have to create new Repositoires & move/migrate the objects of 10G repositories as mentioned in the Oracle installation doc.
3. Currently I am using OBIEE 10g for reposrting purpose & if i switch to ODI 11g , Do i need to use OBIEE 11g?
ODI gurus, I need your reponse ASAP & i have to share it on urgent basis.
Thanks
Edited by: neeraj_singh on May 15, 2013 9:58 PM

neeraj_singh wrote:
Hi All,
Currently I am using ODI 10g Version & Repositories ( Work & Master) have been installed on Oracle database version "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi"
We are thinking to migrate from ODI 10g to ODI 11g Version 11.1.1.5 & i have some queries which are metioned below.
1. Can we install ODI 11g Version 11.1.1.5 version with Repositories ( Work & Master) on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi" or do i need to upgrade my database version to 11G?.You can install ODI 11.1.1.5 but you have to upgrade your repositories using upgrade assistant
refer http://docs.oracle.com/cd/E23943_01/upgrade.1111/e12642/tasklist.htm#CIHGIDFG
2. If yes then, Can i upgrade or use exting Repositoires ( 10g one) for ODI 11g OR i have to create new Repositoires & move/migrate the objects of 10G repositories as mentioned in the Oracle installation doc.No need to create new repositories. You just upgrade them. But you need to takecare of certain things as you are a 10g user. Refer below link for the prerequisite
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e12642/prevusers.htm
3. Currently I am using OBIEE 10g for reposrting purpose & if i switch to ODI 11g , Do i need to use OBIEE 11g?Not clear about the question ?
>
ODI gurus, I need your reponse ASAP & i have to share it on urgent basis.
Thanks
Edited by: neeraj_singh on May 15, 2013 9:58 PM

Oracle report from 6i to 10g

hi all,
We try to move oracle report from 6i to 10g. however we found that the report's record ordering is different.
The case is that, the record in report is ordered according to the attribute "break order".
There is no "order by" in sql".
It runs without problems in 6i, but in 10g , the ordering of the record has no ordering.
Please help to solve the problems or give some advice. Thanks.

Break order property only works for ordering in break groups. For other groups (like the lowest level group) you have to use order by in your SQL.
That was also the case in 6i, so you may just have been lucky that it worked at all.
This is from the Help:
The Break Order property is the order in which to display the column's values. This property applies only to columns that identify distinct values of user-created groups (i.e., break groups ). The order of column values in a default group is determined by the ORDER BY clause of the query for SQL queries

Migrating portal from 10g to 11g

Hi,
We are in the process of upgrading oracle mid tier from 10gAS to OFMW 11g and also migrating it from Solaris to Linux.
With regard the portal migration from OAS 10g to OFMW 11g
1) Is it possible to migrate portal objects from 10g (solaris) to a new install of OFMW portal 11g(linux) directly OR do we have to upgrade the existing OAS 10g to OFMW portal 11g (on Solaris) and then migrate the portal objects to OFMW Portal 11g (on Linux)
I am new to portal migration. Any suggestions and additional details would be appreciated.
Thanks
RB

Migration + upgrade in one shot is do-able, because upgrade will require a sequence of processes but they will be mostly based on repository upgrade, and hence will be transparent to the OS you are using.
However, in practice, the standard rule-of-thumb is that you avoid dealing with multiple layers of complications in a single shot. That means, you break complications in such steps where you could recognize the sources of any later errors/problems you encounter.
hope that helps!
AMN

Urgent: Calling Reports from Oracle Forms 10g (10.1.2.0.2) fails

Problem displaying a report from within Oracle 10g forms.
After a lot of work, we are able to access and actually display a report directly from Internet explorer and view the report from the report server as well.
The successful url was:
http://york.vrc.virginia.gov:7778/reports/rwservlet
?report=/u01/app/oracle/produ ct/vrcmidtier/reports/vrc/pmw41051.rdf
&userid=vrcpr/vrcpr@vrctest&destype=cache&desformat=HTML
The form displays correctly back to the screen
When executing from within the form, however, the report runs but does not display back to the screen.
Forms Steps so far:
created a report object called pmw41050
static parameters are:
file name: /u01/app/oracle/product/vrcmidtier/reports/vrc/pmw41051.rdfination format
execution mode: batch
communication mode: synchronous
destination name; null
destination format: HTML
reportserver:: vrc_york_midtier
Built a when button pressed trigger as follows:
declare
l_report_file varchar2(200);
l_report_id REPORT_OBJECT;
l_report_status varchar2(200);
begin
-- capture the report
l_report_file := 'pmw41051';
l_report_id := find_report_object(l_report_file);
-- set the parameters for this output
set_report_object_property(l_report_id, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property(l_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(l_report_id, REPORT_DESTYPE, CACHE);
set_report_object_property(l_report_id, REPORT_DESFORMAT, 'PDF');
set_report_object_property(l_report_id, REPORT_SERVER, 'rep_york_vrcmidtier');
set_report_object_property(l_report_id, REPORT_OTHER, 'PARAMFORM=NO');
set_report_object_property(l_report_id, REPORT_DESNAME, 'DESNAME');
-- and run the report
l_report_status := run_report_object(l_report_id);
-- monitor progress
while l_report_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
l_report_status := report_object_status(l_report_status);
end loop;
message('back from the report'); -- test message for return
end;
The report executes without error (as indicated by the message on the last line) but does NOT display back to the screen
checking the rwservlet/showjobs verifies the report completed and the reportcan be displayed from there.
So, bottom line: how to make a 10g form call report and display it on the screen?

Thanks MIke for your feedback...
Will this surfice?
Procedure Test_Report Is
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

SSRS Reports migration from 2005 to 2008R2

Hi ..
I have couple of questions.. looking for answers
Am new to report migration. We have 1000+ of reports in 2005 which we need to migrate to 2008R2. After googling theweb i got to know that we have an third party utility RSScripter which is used to move the reports from 2005 to 2008.
Question 1:
By using the above tool i was able to migrate the reports from 2005 to 2008. However, i am not able to redeploy the reports to sub folder in 2008..
Example i have some reports in 2005 at Dev_reports\Reports\.. when i want to copy these reports to Dev_reports\Reports folder they are not moved to sub folder Reports on destination server, but rather they are copied to root folder. Is there any why
that i can copy the reports to particular folder in destination server.
Question 2:
When moved the reports from 2005 to 2008 are all the reports are automatically upgraded and copied to new server(2008)? or we need to explicitly open each and every report in 2008 and deploy to the new report server(2008)?
And my third requirement is to create couple(2) solution for the above said reports and check in them to TFS as a reporting project.
one report project with all the reports from 2005 and another with all reports from 2008.
Appreciate your responses at the earliest. As this is on top priority.. Thanks in Advance
Sri

Hi Sri,
Per my understanding that you are using the RSScripter to move the reports from SSRS 2005 from SSRS 2008 R2, now your first problem is you don't know how to move the reports from the sub folder of 2005 to an specify folder on SSRS 2008 R2, right?
I have tested on my locak enviroment and can reproduce the issue, by default, when you execute the .cmd file the report will move to the new server's root folder, for example, you have an rdl report in SSRS 2005 which path is "/Test/report1.rdl"
, when you move to the SSRS 2008 R2 using the tool it will move to the path "home/Test/report1.rdl".
If you want to move this rdl to the specify folder "home/Test0323/Test/Report1.rdl" you should do the action as below:
Create the specify folder on the SSRS 2005 but not SSRS 2008 R2, move the subfolder and the rdl in it "/Test/report1.rdl" to the specify folder
find and check the "/Test0323/Test/Report1.rdl" in the RSScripter:
the Output will have the path like "Test0323/Test/Report1.rdl",after move to the SSRS 2008 R2, it will also create the path like "/Test0323/Test/Report1.rdl"
More details information about using the RSScripter tool:
Migrating SQL Reporting Services to a new server
For the second question, Generally, reports are not upgraded when you upload a report definition file directly to the report server or SharePoint site. The report is automatically upgraded the first time it is viewed, but the stored report definition file
remains unchanged. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
Similar thread:
If I upload RDL 2005 template on SQL Server
2014 then will SQL Server 2014 render it without migrating it to 2014 ?
Details information about upgrade and migration in the below articles for your reference：
Upgrading Reports
Upgrade and Migrate Reporting Services
For the third question please reference to below article:
TFS Reports using SSRS
Using TFS2010 with Visual Studio / BIDS 2008 and SQL Server Management Studio
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

How to call Reports in oracle forms 10g

Dear All,
How to call Reports in oracle forms 10g.
I am using Oracle Forms 10g Reports 10g and Database 10 and and Operating system Windows XP.
Please give me the Solution.
Thanks and Regards,
Faziludeen

Hi Omkar,
Please check the following code.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:POLICY.POLICY_NO));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('POL_REP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||'LENOVO-428E9E41'||'8889'||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=prod_report_server&P_parameter='||:POLICY.POLICY_NO||
'&paramform=no');
END;
I am used to Start the Report sever   'Rwserver Server=prod_Report_Server Start'
OracleAS Report Services
Version :-   10.1.2.0.2
Name    :-   prod_report_server
Status :-   Server is Shutting down
Jobs in Queue 0
Active Engines 0
I got the Following Error when I trying to run the Report
FRM-41211: Integration error:SSL failure running another product
Thanks and Regards,
Faziludeen

Reports migration 6i to 10g

Similar Messages

Maybe you are looking for