Reports moves to the left from 2nd page?

We have a 6i report when executed, the 1st page shows correctly, but from the 2nd page onwards one repeating frame shifts to the left and this crops the left side information in that repeating frame.
This frame has some columns which are made to display/not display depending on certain conditions.
We tried making the horizontal elasticity of the repeating frame to FIXED but still the same problem exists.
Any help would be grately appreaciated.

hi julia, i placed the anchor in various places to see what works. I placed the anchor center top towards the left and right side within the browser. I also tried upper top outside of the browser center, right and left and it still moves diagonally. Here's what I noticed. On my desktop I use a 25" monitor so the anchor works fine the page moves straight up but whenever I view it on both laptops it moves diagonally. I had my sister test the link on her laptop (she lives in Brazil) and she told me that sometimes it would go straight up and another time it moved diagonally. Here's the link to my website so you can see the problem in action. There's a 'back to top' link on almost every page see for yourself. www.sweetproductionmedia.com
thanks so much for taking the time to help:-)

Similar Messages

How i start printing report from 2nd page

When Press on Print button to print report, then it start from 1 page.
Is it possible that report start printing from the 2nd page....
Plz help if possible...
Thanks alot..

hi dear,
I think wht u do is place a "Form feed" char on the first line of your report
and make sure it has property "print object on" set to "first page"
so as and when u startyour printing it will make a form feed and your first page will
be printed with nothing and print starts from 2nd page....
Enjoy Oracle...

How to make a menu at the top of the page move to the left when scrolling?

I have a menu on the top of the page on a sidebar-sort. I was wondering how you could make it move to the left, not until the scrollbar reaches the end of the page, but when I say so. If i put the key position under the menu, it disappears. If i put it at the top of the page, my only choice is to use the Final motion, but that one moves until the scrollbar ends. So how can I do it?

Hi Raphael,
Please refer to this screen shot - http://prntscr.com/42weie
You need to set the initial motion to zero and specify the key position to the scroll point, where you would like to begin the scrolling from.
- Abhishek Maurya

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
Any ideas?

I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
The problem is dependent on the state of both settings.
The spacebar in Mail "works" if I have either of the following setting combinations:
Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
Other combinations FAIL
Keyboard: smart quotes ON, Mail: Check spelling NEVER
Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
Thanks.
Todd Smithgall

Send report as an email attachment from a page

Hi
I have page which generates a report based on two filters. After the report is generated, 'I want to send that report as an email attachment from that page, when button is clicked "Send Email"
Thanks a lot in advance.'

I accomplished functionality I believe similar to what you are looking for in an application once by querying a report into an html e-mail message. This approach gives you all kinds of flexibility. At least this would be one way of doing it. I am going to include a simplified sample here of what the script looked like. I hope this is at least helpful.
DECLARE
l_body_html CLOB;
BEGIN
l_body_html :=
'<html>
<head>
<style type="text/css">
body{font-family: Arial, Helvetica, sans-serif;
font-size:9pt;
margin:30px;
background-color:#ffffff;}
</style>
</head><body>
' || UTL_TCP.crlf;
l_body_html :=
l_body_html || '<table border="1"><tr bgcolor="#999999">
<th width="75" scope="col">
Department
</th>
<th width="75" scope="col">
Course
</th>
</tr>' || UTL_TCP.crlf;
FOR c1 IN (SELECT some_table.DEPARTMENT, some_table.COURSE FROM some_table)
LOOP
l_body_html :=
l_body_html || '<tr><td>
' || c1.DEPARTMENT || '
</td>' || UTL_TCP.crlf;
l_body_html := l_body_html || '<td>
' || c1.COURSE || '
</td>' || UTL_TCP.crlf;
l_body_html := l_body_html || '</tr>' || UTL_TCP.crlf;
END LOOP;
l_body_html := l_body_html || '</table>' || UTL_TCP.crlf;
apex_mail.send(
p_to => '<some email address>',
p_from => '<desired from address here>',
p_body => NULL,
p_body_html => l_body_html,
p_subj => '<desired subject line here>');
END loop;
apex_mail.push_queue;
END;
Edited by: stbrownOSU on Dec 8, 2009 2:53 PM
I think something must have happened when I copied and pasted the code from TOAD. I have corrected the above code. Please try it again.

Satellite C series Touchpad scrolls/moves when the left button is depressed

Hi,
Seem to be having a problem with my touchpad.
After about 2 weeks of normal operation, it now only scrolls/moves when the left button is depressed.
Have had a look in settings but cannot seem to get anywhere.
Any ides?
Thanks,
K

It is not easy to say what is wrong there. Maybe such behaviour is result of defective hardware.
I recommend you to reinstall operating system using HDD recovery option and check functionality again with factory settings. If the same will happen again from the first moment it must be hardware malfunction and in such case you should contact nearest Toshiba service provider.
They can check it, repair if necessary and all costs will be covered by warranty.

HT202879 Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas reducing?

Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas re fixing this? Problem remains even when I open an earlier version on the previous version of Pages

It has always been that the upgrade tries to be the "master" over the older version.
Anyway in Pages 09 you have probably the Comments field showing, making all contetn to move to the right.
Go to View menu > Hide Comments.

How do I move all the photos from the i-photo library on one account to the i-photo library on another account?

I have recently bought a new mac mini running Lion, and yesterday I migrated an account off an older machine running Tiger.
I want to delete the older account from this machine as it is causing some problems with i-cloud, but I want to transfer the photos first and add them to a different account on the new computer.
So my question is How do I move all the photos from the i-photo library on one account to the i-photo library on another account?

Copy the iPhoto library from the old Mac to the Desktop of the new one. Then download the paid version of iPhoto Library Manager, which is now compatible with Mt. Lion, and use it to merge the two libraries into a new, third library. This will preserve the two libraries in case the merged library isn't to your liking.
Here are screenshots of iPLM's coping and merging preferences:
When you're satisfied that the new, merged libraray is complete and working OK you can delete the two earlier libraries.
OT

How can i move all the song from my iPod to my new mac pro laptop?

how can i move all the song from my ipod touch to my new macbook pro?

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

How can we export the data from OAF Page to Excel instead of .csv or .txt

Hello,
How can we export the data from OAF Page to Excel instead of .csv or .txt
When i click on the export button it is exporting to txt file, But i need to export the data into Excel by default
Please help me
Thanks in advance
Thanks,
Raju
We have changed the below profile option to get the data in excel by default
Profile Name Export MIME type
Profile Code FND_EXPORT_MIME_TYPE+
Existing Value: text/tab-separated-values+
Change as: Excel
Thank you,
Raju
Edited by: 1006649 on May 21, 2013 10:55 AM

We have changed the below profile option to get the data in excel by default
Profile Name Export MIME type
Profile Code FND_EXPORT_MIME_TYPE+
Existing Value: text/tab-separated-values+
Change as: Excel
Thank you,
Raju

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

How do I send a purchased movie to the iCloud from my Windows pc please?

I have been trying without success to send purchased movies in my iTunes account to the iCloud to free up space on my laptop.
Every time I try the movie is deleted, literally gone.
What am I doing wrong please and how do I move a movie to the iCloud from my pc and vice versa?
I am in the UK if that is relevant.

Movie rental FAQ
http://support.apple.com/kb/HT1657
Purchased movies FAQ
http://support.apple.com/kb/HT1906

My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why? Removing the image from that page bright RGB colors are back.. hmm

My RGB colors are turning to cmyk while bringing image from illustrator or photoshop. Why?
Removing the image from that page bright RGB colors are back.. hmm

Edit > Transparency Blend Space > Document RGB

Why, when I click on watch list, does the print shrink and move to the left of the screen, and when scroll down, a load of jargon follow the watch list?

Hi, does anyone know how to rectify this problem?
It only happens on eBay, when I click on "watch list". It starts of normal but by the time it completes, the print has got tiny and moves to the left of the scree. I can use the fingers to enlarge it, but shouldn't have to do that and it reverts to small when I try to use it again! VERY annoying - it's only started happening recently, I've had this iPad 2 for 6 months, and it NEVER happened with my iPad 1!
HELP please!

It's likely an oddity with the eBay site - they may have introduced the issue with a site update. I'm not certain, just sugesting.
Having said that, I don't see this behaviour on my iPad 3. Try restarting the iPad and see if that fixes it.
I use the eBay apps on both iPhone and iPad - I find them much easier than the website - might be worth a look

Reports moves to the left from 2nd page?

Similar Messages

Maybe you are looking for