Reports never finish running

Reports in Config Manager when run in the browser often (not always) do not finish when we run them, they just hang on the spinning circle. Searching pointed me to this thread: Report
never finishes, but our net admin said our HTTPS idle timeout is set to a minimum of 4 hours. However, if I log in locally to the reporting services server and run the reports from there, they finish immediately. This confuses me.
If we can open the Reporting Services site locally on our workstation, what could be causing this issue?

Well, I feel ridiculous.
I noticed on the SQL server itself where I ran the report, the browser was still IE8. This made me think to try putting the reporting services site into compatibility mode. Sure enough, the report rendered immediately.
A third computer I tested has IE11 and ran the report OK, but the version number was older (my workstation is most recent, the third computer, a server, has an older build of 11.0.9600.17207).

Similar Messages

ACS Report - User_Usage_Logon - not returing any data and the report never finishes

Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
Sameer

Hi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
    <switches>
      <add name="DefaultTraceSwitch" value="4" />
    </switches>
  </system.diagnostics>
  <RStrace>
    <add name="FileName" value="ReportServerService_" />
    <add name="FileSizeLimitMb" value="32" />
    <add name="KeepFilesForDays" value="14" />
    <add name="Prefix" value="appdomain, tid, time" />
    <add name="TraceListeners" value="file" />
    <add name="TraceFileMode" value="unique" />
    <add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
    <add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
    <add name="Components" value="all:4,reportrendering:4,http:4" />
  </RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

I've tried to run the update 3 times on my MacBook Pro - it never finishes running. Why?

A pop up keeps telling me to update Firefox. Three times I've tried and it just keeps trying to contact the server. Could this be caused my lousy internet service?

When you reopen Mail, immediately click on the Outbox, select the message and delete it. You can also try taking the account offline. If the spinning stops, delete the message.

Hello everyone! I am having issues with my MacBook Pro early 2011 13 in. When I boot up it starts to boot up and never finishes. The screen just continues to have the apple and spinning circle on it. Any recommendations?

When restarting my computer the screen is freezing on the apple and spinning icon. It never finishes booting. Anyone know how to fix this?

Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Having trouble with imports never finishing

I am having trouble with imports that never finished. It is almost like the pictures are stuck on one image. the only way to get out of Iphoto is to force quit. The next time I open, there are a number of images that still need to be imported, but the import never finishes and seems to stop at the same image. When I go to close down I get the message that Photos are being imported to the library.
Anyone have any suggestions.
Thanks

Photo:
Welcome to the Apple Discussions. Check out your iPhoto library and make sure all photos are viewable and there. Force quitting when iPhoto is working can corrupt the database file, Library6.iPhoto. Make a backup copy of it and save in another folder.
First make a backup copy of your iPhoto Library folder. Now download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field. Open iPhoto and see if it will work OK.
If not, launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
Lastly use iPhoto Library Manager to rebuild the library. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: It can take some time to create the new library if you have a lot of photos. One user reported that with a library of about 5,000 images it took about 12 hours so plan ahead.
Do you Twango?

Report won't run in infoview

I have a Crystal Reports 11 report that will run in designer but won't run in infoview. In designer it takes about 20 seconds to run but in infoview it never finishes. I've verifyed the database and it's the same databse, and user as other reports. What else can I check?

Ok,
First check your services and make sure that the crystal report services are up, it sounds like one of them might be down (you will need admin rights for that - or as someone with admin rights).
If they are all up - please make sure that your infoview server version matches crystal reports version - if not - this might be the reason.
Hope I managed to help you out.

SL Server and Time Machine - Backups never finish - help.

I am running Snow Leopard Server (10.6.4) on a Mini. I want to use Time Machine to back it up to an external hard drive. This setup worked forever, until I upgraded to Snow Leopard.
Now, the backups start, but never finish. There is no consistency to this - sometimes it gets far into the backup, and other times if stops early. In other words, there is not one file that is causing this problem. The only consistent thing is, is never finishes.
I’ve tried to use an old sparsebundle, and I’ve erased the HD completely to start over. I’ve excluded files, folders, and groups of folders, and it never completes.
The alert I get usually says, “The backup was not performed because an error occurred while copying files to the backup disk. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.”
Needless to say, I’ve followed these instructions - waited (six months now), used a Time Capsule instead, used another HD instead, repaired the HD, everything. It just doesn’t work.
Anyone else have this problem? Any ideas on how to fix it?
Thanks.

I'm having the same problem. I can't use Time Machine at all on Snow Leopard Server on an Xserve. There are 2 1TB drives configured as a mirrored RAID set, and a 3rd internal 1TB drive set up to run as a Time Machine backup drive. I have not had any luck after almost a year of trying to get this to work, and I am finding no help on the Internet. I've seen the question asked, but it is never answered. Does ANYBODY out there have an clues as to why this keeps happening? Is it about permissions, since these files are being served from the sharepoint? If I exclude everything but one or two files, the process works, so it's not a hardware error, as far as I can tell. Can't I get TM to bypass any problem files and log them to a report? There are thousands of files. I can't exclude them one by one. I'm already very old.

ColdFusion with IIS URL Rewrite - Page never finishes loading

I am running CF10 on IIS 7.5 with URL Rewrite module installed.
All the rewrite rules work perfectly and ColdFusion is returning the correct pages. In order to get the page displayed in the browser I have to manually set the 'content-length' value in Application.cfc like this:
<cfcomponent>
<cffunction name="onRequestEnd">
<cfheader name="Content-Length" value="#getPageContext().getCFOutput().getBuffer().size()#" />
</cffunction>
</cfcomponent>
Without this code the browser does not display the page. However, even though it is now displaying the page, it is not doing it correctly. The page never finishes loading fully and not all of the HTML content seems to be on the page.
I have tried to add a <cfflush> tag after setting the 'content-length' but it makes no difference. I don't understand why this is happening but I know that it has happened to someone else who was using htaccess: http://forums.devshed.com/coldfusion-development-84/page-not-finishing-loading-coldfusion- and-htaccess-bug-575906.html
Can anyone please help?

Hi guys,
I would like to do url rewriting on our CF app but am worried I'll break something if I try and do it myself - is there anyone who would be interested in a bit of consultancy to help us achieve this?
I want to turn http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
into http://www.allchichesterjobs.com/part-time-jobs
I've tried this using IIS and URL Rewrite, when I browsed to http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
my browser was redirected to http://www.allchichesterjobs.com/part-time-jobs ok - but then I got a 404 error
I'm wondering if I can pay someone to remote view my screen while we talk on skype and tell me what to do?
Hope it's ok to post this sort of request on here
Thanks very much indeed.
Nick

How do you identify when a report has finished?

Hi all,
I've got a big report that is taking a while to run (approx 1min) and the problem I'm having is that my users are getting bored of waiting and starting to click around my web application and re-running the report because they think it has failed. The re-running of the report is causing more load on the system and the reports to run even slower. What I would like to do is stop them re-runnning the report maybe by somehow locking the web page until BI publisher has finished but I don't know how to get a message back from BI publisher.
Currently I'm running the BI publisher report by having a button push which redirects the users web browser to a url such as:
'http://'||:BI_PATH||'/xmlpserver'||:BI_DIRECTORY||'/Custom Reports/'||:p180_report||'/'||:p180_report||'.xdo?_xpf=&_xpt=1&_xdo='||:BI_DIRECTORY||'%2FCustom%20Reports%2F'||:p180_report||'%2F'||:p180_report||'.xdo&_xt='||:p90_template||'&_xf=rtf&_xmode=4'
And then as I'm returning an rtf doc the familiar save, open or cancel popup comes up. The problem is that before the popup appears they can re-click the run report button.
One way round it I've thought of is to have the report generate to a file system and redirect the user to a waiting page that checks periodically for the files existance and then when it does exist forward the user to a page with a view report button. This sounds like a lot of effort, does anybody know of a better way?
I've also wondered if running the report using webservices would be an option, is there a way of getting BI publisher to run a web service when a report has finished? This could then interact with my back end server and the web page could act on that, or am I totally barking up the wrong tree?
Any help would be greatly appreciated!
Thanks,
Darren.

Hi Darren
couple of ideas
1. Rather than 'run' the report, get it to run through the scheduler immediately. Once its running through the scheduler you could then poll the scheduler tables to see when it completes. You could either redirect the users to a wait page or show an egg timer until the document has been created. this would require the document to be delivered to somewhere for you to poll as the URL will not return a job id.
2. Bit more involved but probably better is to hook into BIPs web services. So rather than the button issue an http request it calls a servlet to issue a web service call to BIP to schedule a report. The WS will return the job id to the caller, you can then poll the scheduler via a ws to check the progress of the job. Once complete you can then retrieve the result form the scheduler tables via another call.
Food for thought I hope
Tim

Time machine never finishes a backup on macbook air

Hello
After setting up my Goflex NAS couple of days ago ,my macbookair and macbook pro both showed goflex external for time machine option and asked me if i want to do my time machine backup on that external drive which i answered yes and they both started to do the time machine backup on that drive.As for the macbook pro 15 which is on osx lion ,everything went fine and the backups did as smooth as possible on the schuduale.for macbook air was totally different .it is running on osx lion also .but it will not ever finish up any backups .the only time that it did finish the backup was the first time ,but even for that one ,when i open the time machine window from system pref. it shows the oldest backup none and the latest backup none. i just left it on automatic backup .it will automatically start the backup but never finishes the backup process and i have to shut down the computer in order to stop the bad process.does anybody has a solution for this.
thanks in advance.
mike

In addition to jochen2d you can try this, albeit, requiring much more effort.
Live partition your external HD and make a 2nd partition of about 10-12 GB, call it installer. Then eject the hard drive.
Plug in your DVD drive, put in the installation disc. Fire up Disk Utility and make a new image with the DVD as your source material. Once this is done you'll have a disk image on your Desktop (or wherever you decided to save it). You'll then to scan the image for restore.
Once this is done, eject the disc and then unplug the external drive.
Plug the USB drive back in, and open up Disk Utility again (if you closed it).
Select the install partition you created and then click on the restore tab. Your source is the .dmg of the installation disc you created and your target is the install partition you created.
When this is done you can now run the installer partition and have an exact replica of the DVD installation media with your backup accessible.
Or as jochen2d recommended, you could go out and buy a $29 powered USB hub.

Report on Costing Run

We have a requirement for a report. We run the standard costing run every period for all finished and semi-finished materials. Is there a standard report available from the system for reporting the standard cost (cost component items) for the materials costed ?

Hi Nikitha ,
There is one report CK80_99 .. which is a standard SAP report which gives you Cost Estimate by Cost Components ..
But the drawback is that you cannot have multiple materials in selection parameters and if you have lot of materials .. then its very time consuming to analyze .
What i did for a client is that i created a new ABAP report similar to CK80_99 which has multiple materails as selections . I took the selection date as cost estimate creation date and derived values from KEPH and KEKO tables and its working for my client perfectly..
Only drawback , is that the selection date is to be creation date.. not the validity date .. as validity date will pick up mutiple lines from KEPH/KEKO tables if multiple lines exists..
Discuss the same with you client and ABAP and revert back for any further questions..
Regards
Sarada

Never finishes

I'm trying to make a DVD of my daugther (which i've done successfully in the past with iDVD 4 & 5 but never with 6 - on an older mac I no longer have). Everything seems fine until the end when the disc is kicked out but it never finished the burn and never asks if I want more copies made. I have to force quit iDVD and the DVD won't play on anything, including the mac. I'm using a MacBook Pro and have a buge stack of failed attempts of various projects. Any suggestions or ideas? Thanks!

I have also had this problem ever since I upgraded in Panther. I upgraded to Tiger 10.6 hoping it would have been resolved still having problem.
I have burned many many DVD's successfully ( slideshows of scanned .tiff files)
Suddenly after panther upgrade to date, it says "Image Incomplete" Cleaning up.
It will stay there forever. I do a force quit and open IDVD project and hit burn to begin again. This adds hours to the projects as it has to encode everything again!
One gentleman said to have under Project: the item Best Performance clicked on and not "Best Quaility" and it should work. I did this, it did work one time and then it went back to the same problem.
I am running Tiger 10.6 On PowerMac G4 and same problem on G4 Tower Quicksilver. Both have same problem.
I am burning onto DVD-R Maxell 8X Disks. By the way, the projects are complete and the DVD's have been burned successfully and playback on all DVD's - it's just the encoding and reburning that is messed up.
I think this is a bug, there are a lot of people complaining about this.

Fetching but never finishing while trying to rebuild

have tried to tried to rebuild my mailbox (mailbox was getting populated with multiple duplicate emails), but now, as I run "activity" it's fetching my mail--some 14000 messages, but it's getting hung up around half way through.
and then just starting over.
consequently, there are now NO emails in my inbox. help! how do I make sure the emails I'm trying to recover aren;t lost?
and why the incessant loop of fetching, never finishing, and then repeating the cycle?
mail-less in Dallas

Audrey:
Welcome to the Apple Discussions. You can useiPhoto Library Manager to easily open both of the two libraries on your HD to see if there is duplication or if there are some photos that are not in your primary (located in the Pictures folder) library. If there are some you need to get into the primary library the paid version of iPLM will let you copy rolls or albums between the two libraries and maintain the keywords and comments as shown here.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IPhone5 and iPad3(iTunes 11.1.2) after syncing never finish syncing continuo stay in finishing syncing need help.

iPhone5 and iPad3(iTunes 11.1.2) after syncing never finish syncing continuo stay in finishing syncing need help.

Same issue here iTunes stuck on "Finishing Sync"
Tried to leave it for 10 hours without any changes "Finishing Sync" still shows in iTunes
The Setup:
itunes 11.1.2.32 - install on Windows 7 Enterprise 32bit - Service Pack 1 + all updates from windows update
iPhone 4S - running IOS 7.03(11B511)
Additional information
During the update to from IOS 7.02 to 7.03 the update process stopped and asked to restore the iPhone
The restore deleted all data on my phone. Yes restore means delete all data including your photos.
My backup did not work so now running IOS 7.03 with the "Finishing Sync" issue on iTunes
Please let me know how to solve this issue

Backup exchange 2010 done, unloading medium... but never finish

Hi all,
I'm using Data Protector 07.00 to backup exchange 2010 (with DAG), everything was fine but then exchange full backup has done DP unloading medium then never finish, other jobs will be backed up normal except the exchange will be failed on next start. I can't also abort/cancel the device after the DP unloading medium.
please help me to solve.
thanks,

Hi,
Apologies for digging up this relatively old post but I am getting the same error message as the OP, however the solution is irrelevant / doesn't work and I can't fathom it out.
We have six Help Desk operatives - members of "Help Desk" and "View Only" RBAC. All Help Desk operatives connect to a terminal server (2008 R2) where EMC and EMS is
installed. The EMC works fine for all HD operatives, apart from one. When this operator clicks on anything under "Recipient Configuration" he gets the error described herein. It was fuly working until around early January 2014.
We don't see any event log errors on the Terminal Server or on Exchange 2010 pertaining to this fault.
Although he connectes to a terminal server, it is a one-off used for Exchange management only. It only uses local profiles. I have completely wiped his profile and seen the system build a new
profile for him. As a test,
I added him to "Organisation Management" RBAC group and the issue went away - he was able to enumerate all users, when removed from "Organisation Management" and the problem returns.
When clicking on Recipient Configuration --> Mailbox, I see the PS cmdlet run is:
Get-Recipient -PropertySet ConsoleLargeSet -ResultSize '1000' -SortBy DisplayName -RecipientType 'UserMailbox'
He can connect to EMS and run this cmdlet without issue.
I am at a loss as to where to go from here. Every Google results in checking the paths mentioned in KB2027063 (which are correct) or installing / reinstalling WinRM Extensions for IIS, which
are fine, otherwise the issue would affect all users.
Any help would be gratefully received
Many thanks
W.

Reports never finish running

Similar Messages

Maybe you are looking for