Reports not Generated after moving SCCM 2012 SP1 DB on SQL 2012 SP1 cluster

Hi all,
i have moved my SCCM 2012 SP1 DB on SQL 2012 SP1 Failover Cluster,this cluster is a two node cluster.the DB was moved fine and the DB configuration in SCCM Site maintenance was also done successfully.After the migration process,SCCM was working fine created
few collections & packages, then checked the DB on cluster & they were updated successfully.
but when i tried to install report server on my SCCM machine,again there was no instance displayed after entering the cluster name.
I searched this & come across this post :-
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/4479e73e-8a19-4c7e-9418-b36770656b9b/
which says to install report server on the cluster node machine which is currently running the Reporting Service.I tried to install the report server & the instance was detected this time.it was installed successfully.
But when i tried to generate reports I got this error :-
Permissions are fine as i have added SCCMadmin & sccm machine in the local admin of both the nodes.
Please Help.
Thanks,
Pranay.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
If you look at your second screenshot the Remote errors is not enabled. Use this blog to enable them.
http://www.enhansoft.com/blog/enabling-remote-errors-in-sql
If changing the data source on the report fixed it for a single report. It means that your shared Datasource is having problems. Reset the username and password within CM12 console and this should fix it for every report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

  • Report not running after moving to new environment

    I have a Business View designed in a test environment and reports written against that view.
    The view has been exported & imported to a production environment, with other views added to that environment.
    The report has been copied across & pointed to the correct repository.
    On my test environment, the report runs in 2 minutes, in production it takes more than 2 hours when run from any of the Designer, the CMS or Infoview. Volumes of data being read are similar.
    Test environment server has less RAM than Production, Production has CRS installed on one server & databases on another.
    The only event viewer messages are transport error: invalid object reference, but these occur on both servers on running. There is nothing the any of the CRS log files
    What should I be looking for to diagnose the issues? The customer need to run their year end reporting, and is currently unable to do so, as the reports are timing out for their users.

    The method which you used doesn't finds any info about the production database performance.
    Please create a connection directly to production database from test environment and then test it. This confirms prod database performance efficiency.
    Regarding tracing, if you use ODBC connection, we can do the tracing.
    Here is the tracing method for ODBC connection ( in windows) --- Control panel --> Data sources (odbc) --> Tracing --> define the  "Log file path" where the trace log will be stored --> click button "Start Tracing Now".  ... This you could do this in the production BO server environment .
    Please make sure that, you should stop the tracing option again in the same way. Or else it could slow down the performance.
    And I donot know enabling tracing for SQLOLEDB connection.
    Regards
    Gowtham

  • Report not show after submit query in parameter form

    Hi, anubody can help me with this
    report not show after click submit query button in parameter form

    To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
    If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
    If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
    Maybe this will help some.
    James K.

  • Inspection lot not generated after goods reciept?

    Dear SAPIENTS,
    Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
    Regards,
    Kaushal Rai

    Hi Kaushal,
    For Inspection lot from GR, 01 Inspection type is enough.
    - Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
    - Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
    Regards,
    Keerthi.

  • [svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

    Revision: 5489
    Author: [email protected]
    Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
    Log Message:
    i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
    Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-20148
    Reviewer: Deepa
    tests: checkintests, mustella
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20148
    http://bugs.adobe.com/jira/browse/SDK-20148
    Modified Paths:
    flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
    flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

    FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

  • Reports not working after upgrade to SCCM 2012 R2 -

    I am having the same issue described in this post:
    http://social.technet.microsoft.com/Forums/en-US/30f185ac-c34e-44ad-87eb-7d180a0d76b8/after-2012-r2-upgrade-some-sql-queries-wont-run?forum=configmanagergeneral
    When running reports after upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2 I get the following error:
    An
    error has occurred during report processing. (rsProcessingAborted)
    Cannot
    read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow)
    Conversion
    failed when converting the nvarchar value
    'S-1-5-21-1010966800-777871707-395339515-124623' to data type int.
    I have removed the Reporting Services Point and reinstalled it with no effect.  All reports I try get the error listed above.
    Any suggestions?

    The issue has been resolved.  For anyone experiencing a similar issue I will post the fix that worked for us below:
    I ended up opening a PSS case and in this instance the problem was the required SQL management provider was not properly registered in WMI, which ultimately meant the reporting point upgrade/install was not able to complete successfully after the upgrade. 
    As a result the updated reports were not properly being redeployed to the Reporting Service Point.
    To diagnose this on the Reporting Service Point look in the srsrp.log for entries indicating of an
    Invalid Class, as seen in the example below:
    Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
    Could not retrieve the reporting service name for instance 'RPSERVER' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
    Invalid class SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
    Could not stop the reporting service '' SMS_SRS_REPORTING_POINT 11/6/2013 5:47:12 PM 6096 (0x17D0)
    Next security configuration at [11/6/2013 5:52:12 PM] SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Root Folder exists SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Successfully checked that the SRS web service is healthy on server SERVERRP.AD.DOMAIN SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    SRSRP registry key change notification triggered. SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Registry change SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 11/6/2013 5:47:13 PM 6096 (0x17D0)
    Timed Out... SMS_SRS_REPORTING_POINT 11/6/2013 5:48:13 PM 6096 (0x17D0)
    The important part is the lines saying Invalid Class and then it timing out, so the RP installation was not completed.
    As mentioned earlier the WMI class that was missing or corrupt was the SQL management Provider.  To re-register the class we need to compile the MOF file that is available in SQL.  In our instance the command to run was:
    mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
    Once that was done, monitoring the srsrp.log shows that it could properly detect the SSRS service, stop it and start coping the updated reports and such.  After a few minutes the deploy completed, and all the broken reports started working
    correctly.
    Hope that helps someone else.

  • Report Headings are not displaying after moving request to production

    Dear all
              A request has been moved to production server for a new report from quality to production server.
    First we moved the request from development to quality.
    In quality server , the new report is executing successfully, but coming to production,
    after moving the request successfully, the headings of the fields are not coming (displaying the database table fields).
    I am not understanding why it is happening.
    Can anyone suggest me, what to do for executing the report with specified headings for the columns
    Thanks & Regards
    Maheshwar Rao. G

    Dear SIr
                         I imported again with new request, it came ..but why itz happened in last time.
    Thanks & regards
    Maheshwar Rao. G

  • Crystal report not shown after application idle time

    i have a web page which uses around 10 session variables to store values on a button click.and after assign session values Response.Redirect("~/url",false); to a a page which contains crystal report viewer.and report should show those session values.after keeping the application idle for 45 mins i click on the button which assign session values.then it's redirecting to the report page but the report is not shown.it shows a empty page and no errors shown(only happens application is idle for nearly 45 mins other wise works fine)
    i'm using iis 7
    in the web.config i have set sessionState timeout="60" and application pool idle time out to 60 mins.
    any idea why this happens

    Make sure you are on SP 8
    Make sure you are using .Close and .Dispose on your report objects as you get done with them.
    What OS? (2003, 2008, 2012)
    Provide more info on the following:
    The problem is that the Crystal Report Viewer does not load after a few hours.
    What does that mean? Errors? Warnings? Behavior? Symptoms?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Emails not loading after moving from one Inbox to another

    I was having problems with one of my Mail accounts recently (it would randomly not pull in new emails, go offline, not connect to the SMTP server etc.) and on advice create a new one. When this was up and running, I planned on moving the Inbox and Sent Items from the dusfunctional Mail account over to the new account's Inbox and Sent Items folders.
    After dragging the items from the old to the new folders, I deleted the old Mail account. Before deleting the old account, I checked to make sure that the old emails were listing correctly in the new folders which they did, showing the sender's name and subject line. I however neglected to notice that the Preview text was not showing on some of the messages although it was showing on others. I also did not click on any of the messages to see if they would actually open. I just saw them listed and thought the transfer job was done.
    After deleting the old Mail folder, I am now left with all of the old emails listed in my new Inbox and Sent Items folders, but when I try to open them it just says "Loading" and nothing else happens. I assume that message contents had not yet fully moved over into the new location by the time I deleted the old Mail folder....
    Does anybody know if there is any way in which I might still retrieve the fiull content of the old emails? Does deleting the Mail account also delete all of its emails from my hard drive? Or are they still sitting somewhere?
    All suggestions appreciated.

    Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    +Note: there is no importing involved+
    The thumbs appear, but the images are added 2 or 3 times each and the events are all messed up.
    This happens when you import one Library to another, which you've done by drag and drop:
    Creating a black library and over writing the new with the old.
    Your problem is arising because of the Network Share. iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
    Regards
    TD

  • NVision Report not generated with email option in the Run Report page

    Hi ,
    I want to send the nvision reports through email to the users, I tried it by setting the email option in the drop down of the "Type" after giving "Run Report" and then specifying the email ids. The issue is i am getting emails , but the report is not generated which otherwise generates, and hence no attachement is seen on the email .
    Anybody faced this issue ?? Please help
    Regards,
    Kanchana

    Hi again!
    You are absolutely right! I will mark as solved in 5 mins (can't do it now, thread to fresh it seems).
    thanks
    Manfred

  • AWR snapsohots not generating after restart of the instance

    oracle : 10.2.0.3
    OS : Linux 64-bit
    Issue : AWR snapshots are being generated after restart of the instance.
    I restarted the instance at 31.01.2010 8 AM CST.
    SQL> select STARTUP_TIME from  v$instance;
    STARTUP_T
    31-JAN-10
    SQL> select max(begin_interval_time)   from DBA_HIST_SNAPSHOT
      2  /
    MAX(BEGIN_INTERVAL_TIME)
    31-JAN-10 08.00.04.996 AMto my surprise the AWR reports are not being generated from 8 AM till now 8PM.
    What could be the reason ? Do I need to do any thing manual initiation ?
    Edited by: [email protected] on Feb 1, 2010 8:41 AM

    SELECT STARTUP_TIME     FROM DBA_HIST_SNAPSHOT WHERE STARTUP_TIME > TRUNC(SYSDATE);
    post results from SQL above

  • Web Crystal Report not working after period of time

    Hi
    I have had a problem for a long time now on one of our web servers, it's becoming more of an issue lately due to a web site using Crystal more. The problem is that the Crystal Report Viewer does not load after a few hours. If I re ship the main DLL into the Bin folder for the site, then something gets 'reset', and hey presto, Crystal starts working again.
    The problem would even arise with a basic CR, with just one Textfield on it (i.e. not show)
    Web server is 32 bit Windows Server Web Edition SP 2. Asp.Net project built in VS 2012 against .Net 4.0.
    Anyone have any ideas?
    Many thanks,
    Julian

    Make sure you are on SP 8
    Make sure you are using .Close and .Dispose on your report objects as you get done with them.
    What OS? (2003, 2008, 2012)
    Provide more info on the following:
    The problem is that the Crystal Report Viewer does not load after a few hours.
    What does that mean? Errors? Warnings? Behavior? Symptoms?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • XML publisher report not generating output for huge XML files

    Changed Depreciation Projections Report output type to XML.
    Defined a Data Definition and a new Data Template (RTF) for this report.
    Ran the Depreciation Projection Report to generate the XML output.
    Ran the XML Report Publisher report to generate teh PDF/Excel output of the above report.
    Output generated for smaller XML files. When XML size is big, the program is running for hours without generating the output.
    Teh RTF template is basically a matrix report in which the number of columns in the report is based on the number of periods the report is run for.
    The same is not working in the Desktop version also. The system is hanging when i try to view the preview pdf.
    The XML file size is approximately 33 MB.
    Please let me know if there is any way we can increase the memory size to see the output.
    Thanks,
    Ram.

    for publisher use Category: E-Business Suite

  • Parameter issue - report not generating any pdf files

    Hi All,
    I'm trying to run a report which generates pdf files. Is there any limitation on the parameter string size? For one of the parameter values - '11F EA Accept nonhonor ASnSOMnSON_20091201090150846' the report is not generating any pdf files. I assumed the reason is of the keyword 'AS' in it and created another parameter value - '11F EA Accept nonhonor AnS-SOM-SON_20091202074331997', but it is also not generating any pdf files. I get this message from Adobe Reader " There was an error opening this document. This file cannot be opened because it has no pages. " The report is working normally when i hardcode the same parameter values into the logic. Any suggestions on this?
    Thanks.
    Edited by: user1049091 on Dec 2, 2009 9:17 AM
    Edited by: user1049091 on Dec 2, 2009 12:37 PM

    Tim,
    That report is working normally for all the parameter values, except this one. It is not working only if i pass the value - ''11F EA Accept nonhonor ASnSOMnSON_20091201090150846' as a parameter. It is generating the pdf files when i hardcode the same value into sql query logic in the data template, instead of passing it as a parameter. Please advise.
    Thanks.

  • Accounting Document not generated after Post goods issue in delivery order.

    Dear Experts
    Greeting of the daays,
    Need your help on below issue.
    After making the post goods issue ,the system is not making the accounting document.
    The error given by the system is as follows:
    Material document 12365 does not include an accounting document
    Diagnosis
    The system cannot find an accounting document for the material document 12365.
    Possible reasons for this are:
    The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
    The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
    The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
    __Solution what I tried to solve this issue ,but not successful.__
    __Solution 1- maintain OMS2__
    __Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
    __Solution 3 - price maintain is material master.__
    __Solution 4 - OBYC - BSX - 7920 - GLA/c  and GBB- VAX and VAY - 7920 GLA/c.__
    __Pls let me know if there is any confirgation is missing.__

    Hi
    Do this checks:
    In tcode OBYC check if you have the proper entries.
    Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
    To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for