Reports not showing up in Reports tab

Just downloaded SQL Developer 2.1
I went to the reports tab expecting to see the pre-packaged reports that are mentioned in the tutorial.
Sadly, I see no reports.
No containers.
So I can't even add my own reports.
I'm assuming I missed some step somewhere?
Thanks!

AHA! OK, my laziness bit me in the behind.
Every time I launched SQL Developer, I got one of those "This was downloaded do you want to run it" warnings and I never turned it off.
This appears to not have been an issue when running from the folder itself.
When I pinned the exe to the start menu, I got the warning, said OK, and would actually see the report containers on the reports tab for a moment, and then it would vanish.
I unchecked the "always show this warning" box, and now everything works fine, even from the start menu
thanks much!

Similar Messages

Post OSD deployment advertisment status report not show succeeded. Report show "Will Not Rerun"

Hi,
When deploying image with SCCM 2007 OSD and deployment finish successfully, in report "Status summary of a specific
task sequence advertisement" status for deployed machine is not successfully but show "Will Not Rerun"
I have hundred of machines to deploy and i must click on every machine in report to verify if task was finish successfully.
Please help
Thanks
hrvoje

One more thing. If I remove machine from collection immediately after task start on this machine, status in report show successfully after task was finished. And in console there is no obsolete record for this machine. ?!?!
hrvoje

Service Bus SLA reports not showing up

Hello,
I am triggering an alert on OSB 10.3 with Report destination.
I can see the alert under SLA alert but it does not show up under Report Messages.
Reporting is enabled. I display all messages.
I have an aggregation interval of 3 minutes for monitoring and 3 minutes for the sla rule.
I checked the pointbase db tables they are empty.
OSB is running on the my laptop together with an WLS domain hosting a web service.
I read there can only be one Pointbase DB running, is this true?
Could this be the issue?
Any suggestions, anyone?
thanks,
Barossa

AHA! OK, my laziness bit me in the behind.
Every time I launched SQL Developer, I got one of those "This was downloaded do you want to run it" warnings and I never turned it off.
This appears to not have been an issue when running from the folder itself.
When I pinned the exe to the start menu, I got the warning, said OK, and would actually see the report containers on the reports tab for a moment, and then it would vanish.
I unchecked the "always show this warning" box, and now everything works fine, even from the start menu
thanks much!

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Report not show after submit query in parameter form

Hi, anubody can help me with this
report not show after click submit query button in parameter form

To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
Maybe this will help some.
James K.

Crystal reports 11: Values displayed in crystal report not showing in VB6

Hi!
I updated an existing lower version of crystal report 7 to crystal report 11. Changes are the following:
1. sql query in VB6 to add fields
2. sql query in crystal report to manipulate values and not use formula. crx11 doesn't allow summary/total in formula fields.
3. report orientation
4. additional fields to view
5. font sizes, length, can grow properties, etc.
When I tested it directly in crx 11, all fields/values are displaying correctly. When I integrated it in VB 6 using Crystal ActiveX Report Viewer Library 11.0 and CR Viewer object, the field is blank.
I've tried several checking like field suppressions, conditional suppressions, etc.
By the way, I also have a report using a subrepot with conditional suppressions. Same thing is happening. The subreport data only displays the alloted space but does not show values in VB6.
Thank you in advance for your help.
Edited by: Naga01 on Jun 28, 2011 8:46 AM

Thanks for your response.
Before I read your response, I tried tweaking my reports and was able to resolve the issue.
Steps taken to solve the issue are the following:
a. Value not showing one field of four (4) reports.
Solution: I created new ones and integrate it in VB 6. The values are now showing. Tweaked on the line object properties, got a problem with the extended line but solved it by adjusting the height of the detail section.
b. Value not showing in sub-report.
Solution: My report used a shared variable so I can pass the condition to my sub-report. I used the new reports and just pass a query during runtime. The values in the subreport is still not showing. I added a formula and called the value in it. Values in the subreport is now showing.
I'll try to update the crystal reports version as suggested at a later time.

S_ALR_87013543 report not showing line item correctly

Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
Shiv

Hi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv

Option claims from CRM are not showing in BW report.

Hi All,
We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
Haaris..

Hi,
I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
The infoset has four DSOs and one characteristic as components.
Please let me know if you get any idea?
Haaris.

Safari 6.0.1 not showing in System Report (installations)

I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

Now in Mountain Lion we do not have the update info in Software Update
If you click your Apple menu icon you should see Software Update from the drop down menu.
Clicking Software Update should open the App Store for you.

Crystal reports not show in my browser

i am using vs 2013 sap sp9 reports show in tools crystal reports but i am run in browser reports not show in browser

Hi,
I am afraid that this issue is related to third-party, and it is not supported in these forums.
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

POP LOV in classic Report not in a interactive Report

My oracle version Oracle Express Aplication 11g
Dear Forum
We need a CLASSIC report where i can define what information my report will show.
For example:
My Report contain
ID NAME DATE
In Drag and Drop layout I create two data pickers cause I need to choose information between Date_picker_1 and Datepicker_2. both of them correspond to DATE
In my region source in classic report I write something like this:
Select id, name where DATE between :Date_picker_1 and :Datepicker_2 then Ichoose the months but nothing happen.
I know that in the report interactive you can do that, but my boss doesnt' like interactive report (I dont know why) so my problem is in the Classic report.
Danny Lima
Ecuador
PD: I'm not speak english very well

>
Please update your forum profile with a real handle instead of "897381".
Also the subject of this thread—POP LOV in classic Report not in a interactive Report—doesn't appear to be relevant the question asked. There's no mention of a Pop-up LOV here?
My oracle version Oracle Express Aplication 11gAlways state full version numbers, and include
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
as well.
We need a CLASSIC report where i can define what information my report will show.
For example:
My Report contain
ID NAME DATE
In Drag and Drop layout I create two data pickers cause I need to choose information between Date_picker_1 and Datepicker_2. both of them correspond to DATE
In my region source in classic report I write something like this:
Select id, name where DATE between :Date_picker_1 and :Datepicker_2then Ichoose the months but nothing happen.Always post code wrapped in <tt>\...\</tt> tags. And always post the actual code or a realistic reduced test case: that query is not valid SQL.
I know that in the report interactive you can do that, but my boss doesnt' like interactive report (I dont know why) so my problem is in the Classic report.Nothing to do with the report type. It's because all APEX items are actually VARCHAR2s. For proper comparison semantics with NUMBERs or DATEs in SQL explicit conversion is required:
select id, name
from foo
where bar between to_date(:date_picker_1, 'DD/MM/YYYY') and to_date(:date_picker_1, 'DD/MM/YYYY')Where 'DD/MM/YYYY' is the format mask used in the datepicker items.

AGPM and security security filtering: gpos not showing up in uncontrolled tab

Why Does a gpo not show up in uncontrolled tab? The only thing that is removed is "authenticated users" from security filtering of said gpo. Once I add authenticated users back, bang! its back visible in uncontrolled tab.
Adding specific groups and removing authenticated users from security filtering is a standard practice to apply group policy. Can this not be used with AGPM?
version 4.2

Hi,
For AGPM questions, in order to get accurate help, it's recommended that we ask for advice in the following dedicated AGPM forum.
Microsoft Advanced Group Policy Management (AGPM)
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdopagpm
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Bill To Address contents is not showing in invoice logistics tab

Hi All,
Bill To Address contents is not showing in invoice logistics tab though i have defined the Bill To Addresses for Business Partners.
Same is happening with my Ship To addresses.
Please Suggest.
Regards.
ShriX.

I encountered the same issue, please do the following to make the Bill to address in the documents work.
In the Administration -> Setup -> Business Partners -> Countries
Look for the Code where your business partners country are set.
Then in the Address Format, choose your format. In my case I choose our company format. Hope this help.
Regards,
Cyrous

TS3697 My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.

My new iTunes does not show me a PHOTOS tab when syncing my iPad 3. It only shows Music, Films and Apps tabs on the top left menu.
What am I going to do?

The Photos tab doesn't appear there. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos e.g. :
If you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Plus sign not showing up next to tabs (to enable opening of new tab).

Plus sign not showing up next to tabs (to enable opening of new tab).
Can I toggle a setting in about:config?
Have turned off all add-ons, and re-started but plus sign did not show up. I am using FF4.0.1.

Hi.
I have fixed the problem.
I was asked to "Restore Defualt Set" originally.
After doing that, I wanted to "customize" the sidebar as there were a few toolbar items I wanted displayed.
I found that the "Plus sign" is a "toolbar item".
So I simply dragged it next to the right of the tab/s (up top) and dropped it. Now everything is back to normal, and I can open new tabs with the "Plus sign".
Thankyou for all your help.
I hope this answer can also help others at some time.
All The Best.
Michael Lindsay.
Melbourne, Australia.

Reports not showing up in Reports tab

Similar Messages

Maybe you are looking for