Reports on Statistical WBS

Hello All,
Do we have any report on which we can see the statistical WBS postings? Also is it possible to view along with WBS, the cost centre on which the actual costs are posted?
The only way I could find is run any of standard reports and use dynamic selection criteria for doing a search on Statistical WBS/Project defn. Is there any other way to report it, as the report doent specify anything as statistical and also the costs posted are seen as actuals. This is confusing for end users.
Thanks
Sarang

CJI3- Actual Line Item Report can show you the statistical postings. You can identify them using the value type against each record.
You can also create a variant in report using the dynamic selections (Shift+F4) and use the master data field on the WBS ' Statistical' .
Regards
Sreenivas

Similar Messages

Line item report on Statistical WBS element.

Hi All,
I need to extract Line report on statistical WBS element. I tried CJI3 and end up with the message No costs, revenues or finances were selected.
can some one help me on this.
Thanks and Regards,
Vinod

Hi,
Please check below:
Table PRPS: Select OBJNR and pass to RPSCO and check if any value exists there. Note down the Value type, Year.
While in CJI3, please check if any dynamic Selection is active, remove all.
if mutliple selection shows any exclusions, remove all.
Posting Data: Remove the values. (Or put from 01.01.1900 to 31.12.9999)
Select the standard SAP Layout (Starting with 1SAP)
Value type=11 should be selected by default (Ensure it is checked)
Hope it helps!
Thank you and Regards,
Varshal Kachole

ACTUAL COSTS:REPORT WITH STATISTICAL WBS AND ASSETS ASSIGNED TO THEM

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

An statistical WBS element is an SAP object . Statistical means that you need another object to post the cost or income, let's say,an asset.
Actual costs are the real postings you have in an object, coming from MM, SD, GL ... (just the contrary as budget or planned values).

Report-statistical WBS with assets assigned to them: actual costs

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

You are right: it doesn't exist.
You have to create a custom one, of work with Excel with the aim of merge tha data from FI-AA, PS, and MM.
Ciao
Giorgio

Report: Statistical WBS elements with assets assigned to them - actual cost

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

Hi
There is not a standard report which can cater to your requirements. You need to develop one.
You can take the refernece from CNS41 report for development. Some of the fields you need are PRPS-XSTAT for statistical WBS and will have to use tables ANLA and ANLC to fetch asset master data.
Regards

Report:actual costs:statistical wbs elements and assets assigned to them

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

Thanks for your reply but this is not the question.
The question is:
Example:
I have 100 WBS Elements. Each of them has an average of 5 assets assigned. (what makes 500 assets)
I post lot of invoices in each asset.
I would like a report that tells me at once the total actual amount posted in each ASSET and group those costs by each WBS element.
Thanks and regards,
Miguel

Reports to see cost in statistical WBS elements

Hi,
Is there any standard SAP report available to see cost in statistical WBS element?
Aman

Closing the thread. Got answer.

Project System Cash Management in combination with statistical WBS element

Hi,
within a customer project, we have to solve the following issue:
Customer runs projects and statistical projects in combination with internal orders.
We want to use the PS Cash Management for planned and actual payments.
With statistical projects we have the following problem:
Invoice and actual payments will be processed with the transaction CJFN.
Actual payments are shown only on the internal order (transaction CJIA), but not on the statistical WBS element.
We want the information about the actual payments with in the project system reporting (S_ALR_87013574).
Projects, not flagged as statistical will deliver the expected results.
Many thanks for your ideas, to solve this problem.
Steffen

are u posting to some other cost object also. normally they wud have to be posted to a COPA also with the cost element being 11 category.
the wbs will receive the statistical posting, so there needs to be a real object also.
see whether the real object is getting derived.
the system is nt finding the real object and trying to post with the WBS in real, but since its statistical, the error.
any other calrifications. plz post.
regards
anantha

No costs visible statistical WBS element

Hi,
The followin steps are the setup:
- Project with a statistical WBS element and a network below
- Create a PO with Account category "Fixed Asset"
- Fill in a fixed asset, but also a (statistical) WBS element (put fields 'project' and 'network' optional in customizing)
- execute a MIGO to book costs
Now when I run the cost report for this project using transaction CJI3 then I do NOT get the costs visible on this statistical WBS element.
HOWEVER when I do the same steps, but instead of putting a statistical WBS element I put the network (next to the fixed asset) then I do get the costs visible.
Is this normal or do I have to change something in order to get the costs visible for my statistical WBS element?
kindest regards
bert

It is normal

PM Budget - Statistical WBS element

Hello,
My intention is monitoring the PM budget for a plant by linking every PM order to a statistical WBS element.
After posting on the PM order and performing costplanning via CJ40 i get a overview in transaction: S_ALR_87013543 - Actual/Plan/Variance Absolute/Variance %.
However. Not every PM order shows up in the report. I thought it had something to do with the moment you assign the WBS element to the PM order but this didn't prove to be a valid statement (before or after actual postings on PM order).
I can probably find out by extensive testing, but i was wondering if anybody knows if there are specific rules regaring the usage of statistical WBS elements in PM orders? More specificaly, when the assignment will NOT work and the actual costs will not show up in S_ALR_87013543.
Kind regards,
Peter Hageman

Settling was done towards a Costcenter. The WBS element used is a statistical WBS element, that only can be used for reporting purpose. how the settlement rule is set up doesn't matter in this case.
Issue no longer exists.
Solution was evident. WBS element in the order was stored on the location tab, and in order to use CJI3, you have to link it on the additional data tab...

No costs visible for statistical WBS element

Hi,
The followin steps are the setup:
- Project with a statistical WBS element and a network below
- Create a PO with Account category "Fixed Asset"
- Fill in a fixed asset, but also a (statistical) WBS element (put field 'project' optional in customizing)
- execute a MIGO to book costs
Now when I run the cost report for this project using transaction CJI3 then I do NOT get the costs visible on this statistical WBS element.
HOWEVER when I do the same steps, but instead of putting a statistical WBS element I put the network (next to the fixed asset) then I do get the costs visible.
Is this normal or do I have to change something in order to get the costs visible for my statistical WBS element?
kindest regards
bert

Is this necessary?
Because in the end I want to book these costs as actual costs on my fixed asset...

We want to post actual cost through statistical WBS elements.

when we do the posting on Costcenter assigned to a Statistical WBS element (2nd level), I was in the opinion that, the actual cost posted on the Costcenter of statistical WBS (2nd level) will reflect to the top WBS element (which is non-statistical in 1st level).
But, I cannot able to see the actual cost in the 1st level WBS which also a Billing element (with this, finally we want to do the Resource Related Billing).
So expalin me how to bring actual cost posted on the costcenter of a Statistical WBS, to top WBS element which is non-statistical.

U can book the actual cost from Procurement Cycle or by direct Invoice posting using FI transaction.
Procurement Cycle:
When you create PR or PO user Account Assignment Q or P and maintain WBS element. When u do GR or service entry actual cost is captured on the Project (WBS element).
Using FI Transaction:
When there is no PO and to book the cost u can use F-43 to post actual cost (via Invoice) and mention WBS element.
U can check the Actual Cost using Line item report CJI3 or S_ALR_87013532.
Venkat

Cost center & statistical wbs -ECC 6.0

Hi,
We are using statistical wbs with real postings to cost center. Need to know what report or which table we should use that gives both the cost center & WBS no at line item level in ECC 6.0.
Thanks in advance!
Regards,
Vipin

Hi,
I tried using these reports but not able to see the wbs element with cost center Is any specific settings that we need to maintain to view this like layout ot any config.
Thanks
Vipin

Statistical WBS & WBS with Planning element in summarization

Can statistical WBS and WBS with planning element are included in summarization?
Thx

Hi,
Summarisation reports output are same as the equivalent standard reports but they vary only in the hierarchical display of values. The hierarchy of the report depends on the fields you are using to create a summarisation hierarchy.
Regards,
Arul.

Statistical WBS Concept

Dear Expert's ;
Please Explain the Statistical WBS Concept and Definition , Where it is Useful in PS Concept. Give the detail Description.

Hi
Statistical WBS is for reporting purpose and we cant settel them to AUC or Final ASSETS. As previous post Cost Center and Statistical WBS are there only Cost center we can settle further and WBS we cant settle further since it is statistical
Reg
Vishnu

Reports on Statistical WBS

Similar Messages

Maybe you are looking for