Reports only showing up in local admin console?

Ok, so I am stuck. I have installed SCCM 2012 without issue and installed the Reporting Services point using the same system as the SRS server. Everyhting at first appeared to be great. Using the local console on the server all the reports show up and run
fine.
However, when I use a console on a remote workstation (same login as server) everything works fine except reports, the reports always show up as "No Items Found." I can use the same credentials and browse to the report server and run reports through IE all
day long, but nothing I have tried can get them to show up in the console on the remote workstation. This client has quite a few people who will need to access reports this way, has anyone else seen anything like this?
Thanks,
Karl Koehler, mcitp, mct
P.S. I teach the MOC SCCM 2012 classes, the reports frequently do not show in the local console and a reboot fixes it. So this one really has me stumped.

Thanks for the replies, to answer your questions:
There is nothing special about the dB or SRS setup, everything is set to the default.
The systems running the remote consoles are in the domain, and have tried it on systems with UAC turned off completely.
I am able to access the reports through the reporting website without issue, but I haven't added the certificate to the clients (they do not have an internal CA and so it's using the self-signed.)
Do we think the console only uses HTTPS? Because that could be the issue. I'll add the cert and see what happnes and post back.

Similar Messages

Custom Single Container not showing up in the Admin console

I developed a custom single container and deployed the java files and xml's successfully.
But the container doesnt show up in the admin console as a container channel.
I am not able to add and delete new channels into this container .Can anyone throw light on this issue..
raj

I'm seeing the same thing as Simon, I changed the iOS device name in both places on an iOS device and the name in the Intune console is still "iPhone" which is really unhelpful as I'm sure you can imagine. Is there some other place
that we should be going to rename devices so they are more easily identifiable in the Intune console?
Thanks!

Computers are not showing up in WSUS admin console

I have just deployed WSUS 3.2 on Server 2012 R2. All my client computers are Server 2012 R2 as well. I configured all the settings via the default domain GPO to point to my WSUS server and when I check the reg settings on any of the clients I see all the
settings I configured in the GPO are being pushed down. But when I go to the All Computers in the WSUS console there are no clients showing up. At first I thought it had to do with the port number not being in the Specify Intranet Microsoft update service
location all I had was the server name. I then changed it to 'servername:8530' and that change got pushed down but still no clients show up in the Computer's section in the WSUS admin console.
Is there something I should check or may be missing here?
Thanks

Thanks for the help. Below is the windowsupdate.log file. I stopped the update service renamed the old log file and let it create a new one.
2015-01-06 13:40:14:038
720 218c
Misc =========== Logging initialized (build: 7.9.9600.17415, tz: -0500) ===========
2015-01-06 13:40:14:038
720 218c
Misc = Process: C:\Windows\system32\svchost.exe
2015-01-06 13:40:14:038
720 218c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-01-06 13:40:14:038
720 218c
Service *************
2015-01-06 13:40:14:038
720 218c
Service ** START ** Service: Service startup
2015-01-06 13:40:14:038
720 218c
Service *********
2015-01-06 13:40:14:069
720 218c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-01-06 13:40:14:069
720 218c
Agent * WU client version 7.9.9600.17415
2015-01-06 13:40:14:069
720 218c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-01-06 13:40:14:069
720 218c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-01-06 13:40:14:069
720 218c
Agent * Access type: No proxy
2015-01-06 13:40:14:069
720 218c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2015-01-06 13:40:14:069
720 218c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2015-01-06 13:40:14:069
720 218c
Agent * Network state: Connected
2015-01-06 13:40:14:085
720 218c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2015-01-06 13:40:14:085
720 218c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2015-01-06 13:40:14:116
720 218c
Agent *********** Agent: Initializing global settings cache ***********
2015-01-06 13:40:14:116
720 218c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-01-06 13:40:14:116
720 218c
Agent * WSUS server: IADWSUS01:8530
2015-01-06 13:40:14:116
720 218c
Agent * WSUS status server: IADWSUS01:8530
2015-01-06 13:40:14:116
720 218c
Agent * Target group: (Unassigned Computers)
2015-01-06 13:40:14:116
720 218c
Agent * Windows Update access disabled: No
2015-01-06 13:40:14:116
720 218c
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-01-06 13:40:14:116
720 218c
WuTask WuTaskManager delay initialize completed successfully..
2015-01-06 13:40:14:116
720 218c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-01-06 23:16:19, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: 143FB093-8AA1-4DBC-A582-8806F8F4C1F7, Expires 2015-01-07 22:13:54, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-01-07 15:10:18, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-01-07 15:10:01, not idle-only, not network-only
2015-01-06 13:40:14:132
720 218c
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-01-06 13:40:14:132
720 218c
Report CWERReporter::Init succeeded
2015-01-06 13:40:14:132
720 218c
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-01-06 13:40:14:132
720 218c
DnldMgr Download manager restoring 0 downloads
2015-01-06 13:40:14:132
720 218c
AU ########### AU: Initializing Automatic Updates ###########
2015-01-06 13:40:14:148
720 218c
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-download notify} added to AU services list
2015-01-06 13:40:14:148
720 218c
AU AIR Mode is disabled
2015-01-06 13:40:14:148
720 218c
AU # Policy Driven Provider: IADWSUS01:8530
2015-01-06 13:40:14:148
720 218c
AU # Detection frequency: 22
2015-01-06 13:40:14:148
720 218c
AU # Approval type: Pre-install notify (Policy)
2015-01-06 13:40:14:148
720 218c
AU # Auto-install minor updates: No (User preference)
2015-01-06 13:40:14:148
720 218c
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-download notify)
2015-01-06 13:40:14:148
720 218c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-01-06 13:40:14:148
720 218c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 1, GetLastError=2250
2015-01-06 13:40:14:148
720 218c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2015-01-06 13:40:14:148
720 218c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-01-06 13:40:14:148
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU AU finished delayed initialization
2015-01-06 13:40:14:163
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU Adding timer:
2015-01-06 13:40:14:163
720 218c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-01-06 23:16:19, not idle-only, not network-only
2015-01-06 13:40:14:163
720 1b9c
DnldMgr Asking handlers to reconcile their sandboxes

MAC showing up in ARD Admin console with status of unknown

I have one MAC in our fleet that just will not cooperate with ARD, I am running version 3.2.2 of ARD.
I have used the instructions that are posted here (http://support.apple.com/kb/HT2577?viewlocale=en_US) for removing ARD from the client machine. After the removal of ARD I then reboot the client machine and reinstall from the Custom Client Package that I created, this package works flawlessly on all other MAC's in our fleet. This machine however will not cooperate, it shows in the admin console on my machine with an unknown status and a black icon next to it. Dragging it from the Scanner tab into the All Computers tab prompts for the login information, once the login information is provided it works for a minute or so and then adds the machine into the All Computers tab still with an unknown status and black icon. Trying to observe or control this machine fails every single time.
Has anyone else ran into anything like this? If so how can I go about repairing this so that I can successfully manage this machine just like the rest of our machines?
The client machine in question is a MAC Pro, with an Intel Xeon Quad-Core running OSX 10.5.5. I am officially stumped on this one and would greatly appreciate any assistance that can be provided.
Thanks in advance for the help!

Thanks for the ideas, I had checked the firewall back when this issue began and it was off, now I check it this morning and it's on only allowing essential connections. Turned the firewall back off (we have firewalls in place elsewhere) and presto!
Thank you very much, they are all now cooperating!

Multiple instances of jobs showing in Data Services Admin Console

When running jobs, there are multiple instances of the job showing in the admin console and when viewing any of the logs they are not associated with that job. We have had this in the past, and, I believe, it relates to an internal counter in one of the AL_* table which has wrapped to the start and this causes the admin console to see broken/cartesian joins and display multiple instances. However, I now cannot find how to resolve this. Any help would be appreciated.

what is the version of DS/DI ? what is DS/DI Repositroy Database Type
did you manually delete data from AL_HISTORY table ?

Apex report only show 2000 rows

Hi Experts,
I am going to show about 4800 rows in a report and want to show them within a page. In Layout an Pagination, I set 6000 to both 'number of rows' and 'maximum row count' and set 'pagination scheme' to 'not pagination selected'. However, it still only show 2000 row in the page. Is there anything I missed?
Thanks,
Daniel

Daniel Wu wrote:
In Layout an Pagination, I set 6000 to both 'number of rows' and 'maximum row count' and set 'pagination scheme' to 'not pagination selected'. However, it still only show 2000 row in the page. Is there anything I missed?If 2000 was the previous setting then this is likely to be the common problem of pagination settings being cached for a session. Either log out, restart the brower, and log in again, or manually re-request the page from the browser address bar, adding 'RP' in the ClearCache position in the URL.
I am going to show about 4800 rows in a report and want to show them within a page. Are you really sure about this? That's a lot of data to throw at someone in one go, and will have adverse effects on performance, usability and accessibility.

Selection Screen on Web Report only show filter area varieables.

HI ,
I am using WAD 3.5 and web template uses the query developed in 3.5, This report has two selection variables one in filter area and one in Rows section.
We recently did the Ehp 1 upgrade and after that it automatically showing only variable selection for character in Filter area. To show all I have to hit "All".
For Query designer query I was able to change the property in RSRT but for Web report I am not able to change and it is still showing only one selection screen instead of Two .
Have you faced any such issue. Please can you share your thoghts on how to correct it.
Best Regards
Som

Hi,
if you are able to see both variables in rsrt we could say that the variable definition are ok ( option: ready for input in variable definition)
So open the web report on web application designer and in the web template Properties search for "Force Variable Screen display" option and check this option.
Hope it helps,
rp

Reports only shows Servers

I've just installed ZEN Inventory on a server in our test lab. The
server is running Netware 6.5. It's also running ZFD 7.1, ZFS 7.1 and
ZFH 7.1. I've configured everything correctly as far as I can see.
I have one PC (XP SP2) connected and I can see from the console that
the PC has been inventoried. In console 1 If I click on Tools,
Zenworks Inventory and select Reporting, choose Hardware or Software
Inventory, select any catagory, the Scope for the report is greyed out
and has Server chosen as default. Why Can I not choose workstations?
(Same for queries - only Server radio button checked - others greyed
out)
Thanks

Patrick,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Report only showing items from one group

Post Author: webdevguy
CA Forum: General
I have two tables in a Btrieve database: Customer and CustomerType. Customer contains a field called CustType that is mapped to the ID field of the CustomerType table. In my report, I have the results grouped by CustomerType.ID with the group name pulled from CustomerType.Description.This mostly works. However, only results from the last CustomerType in the database are displayed. There are a number of other customers who belong to other groups, but only those with the CustomerType "Residential" are shown. There is no formula or anything in the Select Expert that would cause this.Any ideas?(By the way, I'm a Crystal Reports newbie. Sorry if this is a stupid question.)

Post Author: webdevguy
CA Forum: General
Thank you! Changing the link to Left Outer Join caused the other records to display. However, the "Residential" customer type is the only one with grouped records. All other records are placed under a group with no name, even though those records have different CustType values. Also, there is nothing in the group footer, so I assume it isn't that.

TEM - Business Information Report - only showing 1 instructor instead of 2

Good afternoon folks
We have a number of Business Events, in TEM, which are held by 2 instructors per event. When we run the "Business Event Information" report in PSV3 for these events we only get 1 instructor displayed; however if we run the "Resource List per Business Event" report or the "Instructor Information" report then both instructors are displayed.
Can anybody advise what I need to do so that the Business Event information report matches the Resouce list and instructor information reports.
Many thanks
Dawn

Hi Suman
Thanks for your reply. When I am having both the parts of Query 1 & Query 2, the BEx Report is falling over when executed pointing to Condition.
The second Query will pick the Top 3 Reason Codes for a particular Customer and then the individual Document Count for these 3 Reason Codes is divided by the Overall Result (Document Count) to give the individual Result across each row as %.
Hope this is clear now. I tried Cell Definitions but didn't find it useful in this scenario, or I might be missing something. Can you please explain me in detail of how this can be done in 1 BEx Query using Cell Def?
Please let me know if this can be achieved in Single BEx Query.
Thanks,
Chandu

Reports Visible on SCCM Server but not in the Remote Admin console

Hello All,
I have a little issue with reports not showing up on my admin console. Odd things is that when I log into the sccm server the reports are visible and can be run without issue. How can I get the reports to show up in my admin console. I have included screenshots.

First off can you access the report in the native web interface remotely?
BTW I don't recommend accessing the report via the console too much overhead.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
http://www.enhansoft.com/

Weblogic 10, WLST and Admin Console Classpath Exceptions

I've been deploying an application to Weblogic 10 (not 10.3 from Oracle, the last version under the BEA logo) for a few weeks now without a problem. We're going to upgrade to 10.3 from Oracle in our development environment and play around with that hopefully today but I can't imagine a dot-version being much different so I figured I'd post the issue anyway.
Recently, we've been having some issues with the WLST script we use to deploy/redeploy the application. It seems to have just started happening randomly which is odd because the script has not been modified since the get-go. What's happening is the application is compiled, staged and then the WLST script kicks off, log into the application server, looks to see if the app is already deployed, if it is, it redploys it with the latest code and then starts it up and then exits. Every now and again, the next time we go to deploy the application, the WLST fails saying that someone currently has a lock on the admin console. When we log in to the admin console, we see that the user the WLST script uses to log into the admin console currently has a lock on the console and we have the option to take the lock from this user.
When we click the button to take the lock, we get a HUGE exception in the lefthand panel where the Lock & Edit button typically is that says something along the lines of:
Error opening ...
The source of this error is javax.servlet.ServletException: javax.xml.transform.TransformerFactoryConfigurationError: Provider net.sf.saxon.TransformerFactoryImpl not found at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:324) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:119) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:551) at ...
If I click on the 'Home' button along the upper righthand corner to go back to the home page of the admin console, the error goes away, the 'Activate Changes' button reappears, and then I click that and the Lock & Edit button reappears, then if I go back to my WLST script and run it, it runs successfully. If I log back into the admin console, everything appears normally. This happens intermittently and I'm not sure why it's happening some times and not others. If my WLST script is incorrect I would assume it would behave this way EVERY time.
I also don't get why the xml transformer factory SOMETIMES throws the exception and sometimes it doesn't. It also happens when I try to click on a JDBC data source. Same exact exception is thrown on the default configuration tab, if I click on any of the other tabs available after clicking on my JDBC data source, those all appear fine, just the initial default Configuration > General tab shows this huge exception. If I stop and restart the application server, these exceptions magically go away...the odd thing is this exception being thrown seems to be referencing libraries made available by my deployed application (the whole net.sf.saxon.TransformerFactoryImpl class is in a library we deploy with our application). These jar files containing these libraries should ONLY be available to the deployed application, I'm not putting these files on the classpath of the application server, so why the application server's admin console have any knowledge of these libraries? Could these be mucking with the overall functionality of the admin server's behavior?
Here is my WLST script I use the deploy the application. If you see something wrong with it, any feedback would be greatly appreciated. Any thoughts on the whole classpath of my application being used by the Weblogic Admin console would be helpful too.
WLST Script:
connect("merlin", "merlin595")
# check to see if the apb data source exists and if so, make sure it's targeting the AdminServer
try:
     # Either deploy or redeploy application
     try:
          print 'Checking for the existence of the APB application.'
          cd('/AppDeployments/apbEar')
          print 'The APB application will be redeployed.'
          progress=redeploy('apbEar')
          print 'Status of redeployment: ' + progress.getState()
     except WLSTException:
          print 'The APB application has not yet been deployed to this server, so application will be deployed for the first time now.'
          progress=deploy(appName='apbEar', path='/opt/weblogic/merlinpb/merlinpbEar/apbEar', targets='AdminServer')
          print 'Status of initial deployment: ' + progress.getState()
     # Start application
     try:
          print 'Starting APB application'
          startApplication(appName='apbEar')
     except WLSTException:
          pass
     disconnect()
     print 'End of script, exiting WLST...'
     exit()
except WLSTException:
     print 'Could not deploy apb. Please log into the admin console and attempt the deployment manually.'
Oh, one final thing I've noticed when I use this script. The last thing the script says WHEN it actually runs successfully is:
<Nov 13, 2008 10:57:13 AM EST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
Why does it say that? What does that mean? Is my script mot structure correctly above?
Any help is greatly appreciated. Thanks again!
Rob

Hey Mike,
The problem I was experiencing was that we had code that was applying an XSL stylesheet against XML we are getting from the database. In order for this stylesheet to work, we had to set code that does the following:
System.setProperty("javax.xml.transform.TransformerFactory", "net.sf.saxon.TransformerFactoryImpl");
Now the first time this code was called, and someone subsequently went to the Weblogic admin console, the screens would be completely unreachable...we were experiencing loads of compilation errors. So I did some digging and tried various other ways to set the TransformerFactory class that wouldn't affect the system as a whole. I found, by sheer luck, the fact that you can set this parameter in the weblogic-application.xml file located in the META-INF directory of your root EAR folder. The very first element in the XML of my weblogic-application.xml file is now:
<wls:xml>
     <wls:parser-factory>
          <wls:transformer-factory>net.sf.saxon.TransformerFactoryImpl</wls:transformer-factory>
     </wls:parser-factory>
</wls:xml>
I now deploy the application with this and my reports are transformed properly and the admin console and command-line WLST scripts are all working uninterrupted as well without any adverse side-effects. Hope that helps. Just an aside, in preparation for the upgrade to WLS10, I restructured our application to a split development directory structure...this structure in combination with Workshop 10 really has made development and deployment much easier.
Best of luck. Cheers!
Rob

How to administer custom Desktop Channel Attributes via Admin Console?

I have a desktop channel (JSPProvider) that requires some global settings (database connect info, etc.) to be made by an administrator after deployment and before use. Is it possible to make the custom attributes show up in the administration console (Manage Domains --> myDomain --> Applications --> Desktop --> Domain Attributes --> myChannel --> Edit Channel)? Is there a HTML-Template that I can edit?
What would be the preferred way to enter such settings?

this is a little more difficult when you are using JSPProvider rather than a direct custom channel. Basically what you need to do is go into /etc/opt/SUNWips/xml and find something like iwtUserInfoProvider.xml
Copy and edit this file for you own channel and then using ipsadmin -import bring the new channel attributes and privs into the profile service. These will then show up in the admin console. If you want to be doing this sort of stuff then I would recommend write a whole new channel provider rather than use JSPProvider

Admin Console consolidation

I have a client that has 4 physical machines. Using Windows BEA 9.2 MP3...They installed an application in domain X (managed server ms1) Each box is
exactly the same. (except different machine IPs). Each machine has a Node Manager and Admin Console configured on port 5555/7001 respectively.
This requires a separate console session to manage each app.(4 authentications, etc...)
Q: Is it possible (without re-install) to elevate 1 of the admin consoles to have all the other node managers connect to it and then turn down the local admin consoles
running on each server. In essence re-configure the plumbing. (giving me a single pane of glass to manage each app)
The app is not cluster aware and the customer has chosen to use external load balancers to distribute the load to the (4) servers. (i.e ip addresses)
So this request is just to make an admins life easier. I am being told that an un-install and re-install is required.
Cross my fingers.
TIA
DJ

So you are saying that I need to
1.) create 3 NEW servers entries in one of the physical servers domains.(they are the same named name (i.e domain X) )the paths I will check, but i suspect they are the same.
Physical server ABC: domain X = ABC.X
server MS1 (existing)
add MS2, MS3, MS4
2.) pack each servers domains managed servers (MS1) from Physical server
Physical server 123: domain X = 123.X
pack MS1
Physical server 456: domain X = 456.X
pack MS1
Physical server 789: domain X = 789.X
pack MS1
3.) unpack servers???. (will the fact that the domain ABC.X already has a MS1 instance be a problem)?
how do you associate the unpacked MS1 entries from old physical servers to their NEW MS(X) placeholder entries on ABC.X?
Key ( Physical Server.Domain(ManagedServer) )
Aren't the existing managed servers :
123.X(MS1) and
456.X(MS1) and
789.X(MS1)
Already enrolled in the node managers on each of the physical servers(123, 456 and 789)???
Any help would be appreciated..
TIA
-DJ

Netlet and Admin Console

Hello,
I am using Secure Remote Access Portal Server 6.0
I did the instalation of Portal Server and Secure Remote Access support on on machine.
In another machine I did the installation of the gateway service.
In a thir machine I did the installation of the Netlet Proxy.
Now I would like to configure and test the Netlet component, but didn't see any reference to it in the Admin Console, under SRAP configuration.
Any ideas,
Sergio

Hey Mike,
The problem I was experiencing was that we had code that was applying an XSL stylesheet against XML we are getting from the database. In order for this stylesheet to work, we had to set code that does the following:
System.setProperty("javax.xml.transform.TransformerFactory", "net.sf.saxon.TransformerFactoryImpl");
Now the first time this code was called, and someone subsequently went to the Weblogic admin console, the screens would be completely unreachable...we were experiencing loads of compilation errors. So I did some digging and tried various other ways to set the TransformerFactory class that wouldn't affect the system as a whole. I found, by sheer luck, the fact that you can set this parameter in the weblogic-application.xml file located in the META-INF directory of your root EAR folder. The very first element in the XML of my weblogic-application.xml file is now:
<wls:xml>
     <wls:parser-factory>
          <wls:transformer-factory>net.sf.saxon.TransformerFactoryImpl</wls:transformer-factory>
     </wls:parser-factory>
</wls:xml>
I now deploy the application with this and my reports are transformed properly and the admin console and command-line WLST scripts are all working uninterrupted as well without any adverse side-effects. Hope that helps. Just an aside, in preparation for the upgrade to WLS10, I restructured our application to a split development directory structure...this structure in combination with Workshop 10 really has made development and deployment much easier.
Best of luck. Cheers!
Rob

Reports only showing up in local admin console?

Similar Messages

Maybe you are looking for