Reports: Other Than Tables, Format Issue, Content

Hi,
I am using Data Modeler 3.0 which I downloaded the other day. I have used the reports function to generate a document that shows table information. This has worked ok for tables but I had a few questions / suggestions:
1) How do I include triggers, sequences, etc in the report? We are exporting this to document the data model and it is not complete.
2) When I open the exported Microsoft XML document in Word 2007, it reports that the file contains formatting items that are not supported in the current version. I would suggest this be updated or perhaps converted to OpenDocument format to be more standardized.
3) Could the report include a linked table of contents as part of the report?
Thanks,
John

Hi John,
1) How do I include triggers, sequences, etc in the report? We are exporting this to document the data model and it is not complete.
3) Could the report include a linked table of contents as part of the report?Well, at this stage reports are static. You can't change them.
2) When I open the exported Microsoft XML document in Word 2007, it reports that the file contains formatting items that are not supported in the current version. I would suggest this be updated or perhaps converted to OpenDocument format to be more standardized.This suggestion will be considered, although you shouldn't have problems opening files with MSWord 2003 and above. Does Word say exactly what it doesn't like ? That's strange.
Thanks.

Similar Messages

We each have our own device, a laptop and an iPad. when sending imessages recipients cannot tell which of us sent it other than looking at the content. Is there any way to add an identifier to make it clear who is sending the message?

We each have our own device, a laptop and an iPad. when sending imessages recipients cannot tell which of us sent it other than looking at the content. Is there any way to add an identifier to make it clear who is sending the message? I know we can say 'this is mom or this is dad" but when an email is sent it identifies the device that sent it so why not imessages too?

Stop using the same apple id on all your devices. Each person should have their own. You can still share apps via home sharing.

Migration from crystal reports 8 to 11 - Formatting Issue(Criticial)

Post Author: DJ Gaba
CA Forum: General
I have migrated my crystal report version from version 8 to version 11 (evaluation version) but I am seeing some formattiong issue
My entire report data has moved little bit toward right so my rightmost line (table) wraps up in next page and hence leaving every second page blank.
is it that I am using evaluation version that is casuing problme. Report is opening up properly but it's the formatting issues
Or it's something else
Let me know
DJ

Post Author: DJ Gaba
CA Forum: General
Well I will definately try that. Currenlty I am in process of downloading licensed version to observe the behaviour
But just looking at font sizes in both pdf's (version 8 and 11), it seems that font sizes are same in both pdfs. But I will confirm that once I open the crystal report 11 designer
Probably you can send me your e-mail ID so that I can send you both pdf's
I am also planning to compare property/obect values in crystal report 11 designer to see if anything else got changed that needs to be reverted as it was in crystal report 8.
Thanks
DJ

GR blocked stock report(other than MMBE)

Hi friends,
do we have any transaction code to check the stock of GR blocked stock?
i need other than MMBE -this can be used for sinlge material.. i need Gr blocked stock list of all the material of perticular plant.
in MB52, it is giving blocked stock qty but i need GR blocked stock
Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM
Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM

There is no table that hold the GR blocked stock. This blocked stock in MMBE is dynamically calculated.
from OSS note: 23687;
The stock overview (transaction MMBE) displays the GR blocked stock. This stock is calculated from the total of all goods receipts for purchase orders into GR blocked stock of this material (movement types 103 and 106) for which the transfer into the own stock or the return delivery to the vendor (movement types 105 and 104) was not yet entered. In this case, only those order items are considered whose goods receipt to the stock is to be posted to the material master.
Because of this design, reading POs and PO history, it is not available in MB52 as it would create real performance issues.
Thats why I pointed you directly to the purchasing reports.
The stock would not be differ from what you get with the WE104 selection.
An ABAPer can certainly copy the MB52 program and include the calculation logic that is used in MMBE.

Query on report display in table format on 7970G

Hi,
I know how to use the xml objects to display data on Cisco IP Phone using Ip Phone services. Now I want to generate report in table format on the phone.But in the xml objects available there is no option display data in table format .
Should I have to use BTXML for that ?
or do I have to diaplay it as an image ?
I want to keep the first row as heading and the rest of rows I should scroll and view.
Please let me know how to do that .Please also provide any sample documents or links.
Thanks,
Peter

I've never really seen btxml in the wild.. it may be used in environments where people use Cisco phones but connected to SIP proxies, and not callmanagers. I don't think this is the place to discuss btxml.. I've never seen a single mention.. you might find people in Asterisk or similar forums though.
Now, your screenshot shows a CiscoIPPhoneImage.. behind it is a simple PNG image, at a resolution of 298x168 and at 24bits (the shot looks like from an IP Communicator). Depending on the phone type, the resolution varies (IP Communicator and 797x phones have the same resolution but different bit depths, the 7965/54 have a lower res and 16bit, the 7921 supports a resolution of 176x140 at 16 bit).
It's probably easier for you if you stick to the CiscoIPPhoneImageFile instead of the CiscoIPPhoneImage because PNG is a standard, whereas with CIP you either write your own library, or you create a GIF in your code then use Cisco's code to convert that to a CIP file.
For your reference, here's the latest IP Phone services developer guide: http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/6_0/english/programming/guide/XSIbook.html. It contains detailed information about every CiscoIPPhone element, including samples.
Creating a PNG file pro grammatically is a bit out of scope of this forum.. you need to figure that one out on your own but there are tons of other boards on the web that deal with that kind stuff. Once you have the PNG, creating the appropriate CiscoIPPhoneImageFile object will be a piece of cake. Once you have your PNG generation in order and still have trouble getting the object to the phone, it would be appropriate to continue here.

Reports exported to Excel - Formatting issues

We have two Business Objects Enterprise servers (boxi r2 and boxi r3.1 sp3) running side by side. We find that reports created using boxi r2 and exported to Excel format look fine. When we run the same report and export to excel using boxi r3.1 sp3, we encounter the following formatting issues:
<ol>
<li>All columns do not fit on pages. The last 2 to 3 columns spill over onto extra pages.</li>
<li>There are some columns where most of the values are blank, but when a row is exported that has a value in that column, all subsequent column positions for that row shift.</li>
<li>All rows do not fit on page. The last two rows flow onto a new page, then there seems to be a page break.</li>
<li>On some reports dates are displayed as ######.</li>
<li>On some reports column headings are not centered.</li>
<li>I would appreciate any input that would help us determine a fix for the formatting issues we are encountering.</li>
</ol>
The report is executed using CrystalDecisions.CrystalReports.Engine.
Here is the code from the application that does the export:
                            ExportOptions exportOptions = new ExportOptions();
                            exportOptions.ExportFormatType = ExportFormatType.Excel;
                            exportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
                            DiskFileDestinationOptions diskOptions = new DiskFileDestinationOptions();
                            diskOptions.DiskFileName = filename + ".xls";;
                            exportOptions.ExportDestinationOptions = diskOptions;
                            ExcelFormatOptions XLOptions = new ExcelFormatOptions();
                            XLOptions.ExportPageBreaksForEachPage = true;
                            XLOptions.ExportPageHeadersAndFooters = ExportPageAreaKind.OnEachPage;
                            exportOptions.ExportFormatOptions = XLOptions;
                            rptDoc.Export(exportOptions);
Please note the following details about our environment:
<h5>Report Designers:</h5>CR Designer version: xi Rel 2
<h5>Developer environment</h5>Has the following installed:
- Business Objects Enterprise XI Release 2
- VS .Net 2008
- Crystal reports Basic for Visual Studio 2008
- Crystal Report 2008 Runtime SP3
- Boxi .Net SDK
- SAP BusinessObjects Enterprise XI 3.1 Client Tools sp3
- .Net Version: 2.0
<h5>Crystal Server environment:</h5>Two clustered Business Objects Enterprise servers with the following installed & configured
- Business Objects Enterprise XI Release 2
- Crystal Reports XI Release 2
- SAP BusinessObjects Enterprise XI 3.1 SP3
- .Net Version: 2.0
<h5>Web Servers:</h5>Two load balanced web servers with the following installed and configured
- Business Objects Enterprise XI Release 2
- Crystal Report 2008 Runtime SP3
- Crystal Reports XI Release 2 .Net 2005 Server
- SAP BusinessObjects Enterprise XI 3.1 SP3
- .Net Version: 2.0

Umm, the code you provided has nothing to do with Business Objects Enterprise...(?). So, I'm a bit confused by the mention of BOE and "The report is executed using CrystalDecisions.CrystalReports.Engine" in essentially one paragraph.
Can you pls explain?
- Ludek

Can you add comments to the XML reports other than one Block Comment and one Test Comment?

I know how to use Block Comments and Test Comments but if I need to add more comments to my XML report in a test other than one Test comment, is there a way to do this? In other words, I would like to be able to add say 5 comment lines for a single test. Also, can a Test Comment or Block comment be more than one line in length? If so, how do you do that?

What version of TS do you have? If you have 4.1 or better (might be possible in 4.0 I can't remember) you can just use the additional results. So in the step properties you will see Additional Results. Then just add as many as you want.
Then you will see it show up in the report like you want. I couldn't get multiple lines to work in one comment. I tried \n but that didn't seem to be supported here.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
StepComments.JPG ‏38 KB

CRM reports other than Interactive reports

HI,
In my projects we have lot of custom fields developed in BP, Lead and Opportunity. The client needs a report based on the cutom fields. When we tried to creat new reports through interactive report we can find one reports for lead and opportunity that to only the standard fields are available.
how to create a report for custome fields. I am not able to create the DashBoard reports also. Can any one sent the settings for DashBoard.
With regards,
Selvam T

Hi John,
1) How do I include triggers, sequences, etc in the report? We are exporting this to document the data model and it is not complete.
3) Could the report include a linked table of contents as part of the report?Well, at this stage reports are static. You can't change them.
2) When I open the exported Microsoft XML document in Word 2007, it reports that the file contains formatting items that are not supported in the current version. I would suggest this be updated or perhaps converted to OpenDocument format to be more standardized.This suggestion will be considered, although you shouldn't have problems opening files with MSWord 2003 and above. Does Word say exactly what it doesn't like ? That's strange.
Thanks.

Webi XI report export to excel--- Formatting issue

Post Author: Sougata
CA Forum: WebIntelligence Reporting
We have WEBI report that contains cell with hyperlink. The value of the cell in numeric. Type is string.
When we export this report to excel. In, Excel version is MS-office Excel 2003. In excel it is showing those green with Error --- "NUMBER STORED AS Text".
Any solution?

Hi Steve,
As per my understanding, the issue occurs because Excel Destination gets the data from the source. We can change it, but once it re-validates it will change it back. This makes sense since we cannot change the data type in the actual table. To work around
this issue, I suggest that we can add a data conversion or derived column to explicitly cast the values.
Besides, the suggestion post by Arthur means that we can add IMEX=1 to the value of Extended Properties in the connection string of the Excel connection manager in the Properties window to specify Import Mode. For more details about the settings of IMEX,
please see:
https://support2.microsoft.com/kb/194124?wa=wsignin1.0
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Small Product page table format issues with unused sections

Hello All,
I hope someone can help me to identify what it is I may be doing wrong with my Small Product catalog pages. I have this issue where I have unused sections or blanks where normally product images/detail would be. I think this may be coming from my Product titles which use more than two lines of characters and those products that I have on sale where the listed price is lined through with a new price below(additional row of text) where the product is taking more hieght area than the norm. It seems to be pushing the other products farther over/down to another column/row. I'm sure it is somelthing that I have wrong with the way the table is setup for managing the hight of each product area dynamically, but I am new to this so not sure what to address it in the code.
here is a link to one of the problem pages showing the issue:
http://tigressartscomics.com/cgc-graded-comics
Any help would be greatly appreciated.
Thanks,
Kennedy

Hi Mike,
Actually I just realized that by adding that height code to my css the Stock qty and add to cart button are no longer visible. I even tried increasing the height to a ridiculous amount to see if the value was just not large enough to show it, but still no stock and add to cart button...just a lot of blank space under the items.
Any idea what may be causing that?
Thanks,
Kennedy

Can we capture changes made to the objects other than tables using streams

Hello All,
I have setup a schema level streams replication using local capture process. I can capture all the DML changes on tables but have some issues capturing DDL. Even though streams are used for sharing data at different or within a database I was wondering if we can replicate the changes made to the objects like views, procedures, functions and triggers at the source database. I am not able to replicate the changes made to the views in my setup.
Also, when I do a "select source_database,source_object_type,instantiation_scn from dba_apply_instantiated_objects" under the column 'object_type' I just see the TABLE in all the rows selected.
Thanks,
Sunny boy

Hello
This could be a problem with your rules configured with capture,propagation or apply. Or might be a problem with your instantiation.
You can replicate Functions, Views, Procedure, Triggers etc using Streams Schema level replication or by configuring the rules.
Please note that the objects like Functions, Views, Procedure, Triggers etc will not appear in the DBA_APPLY_INSTANTIATED_OBJECTS view. The reason is because you do a schema level instantiation only the INSTANTIATION_SCN in DBA_APPLY_INSTANTIATED_SCHEMAS is accounted for these objects. At the same time tables would get recursively instantiated and you would see an entry in DBA_APPLY_INSTANTIATED_OBJECTS.
It works fine for me. Please see the below from my database (database is 10.2.0.3):
on capture site_
SQL> connect strmadmin/strmadmin
Connected.
SQL> select capture_name,rule_set_name,status from dba_capture;
CAPTURE_NAME RULE_SET_NAME STATUS
STREAMS_CAPTURE RULESET$_33 ENABLED
SQL> select rule_name from dba_rule_set_rules where rule_set_name='RULESET$_33';
RULE_NAME
TEST41
TEST40
SQL> set long 100000
SQL> select rule_condition from dba_rules where rule_name='TEST41';
RULE_CONDITION
((:ddl.get_object_owner() = 'TEST' or :ddl.get_base_table_owner() = 'TEST') and
:ddl.is_null_tag() = 'Y' and :ddl.get_source_database_name() = 'SOURCE.WORLD')
SQL> select rule_condition from dba_rules where rule_name='TEST40';
RULE_CONDITION
((:dml.get_object_owner() = 'TEST') and :dml.is_null_tag() = 'Y' and :dml.get_so
urce_database_name() = 'SOURCE.WORLD')
SQL> select * from global_name;
GLOBAL_NAME
SOURCE.WORLD
SQL> conn test/test
Connected.
SQL> select object_name,object_type,status from user_objects;
OBJECT_NAME OBJECT_TYPE STATUS
TEST_NEW_TABLE TABLE VALID
TEST_VIEW VIEW VALID
PRC1 PROCEDURE VALID
TRG1 TRIGGER VALID
FUN1 FUNCTION VALID
5 rows selected.
on apply site_
SQL> connect strmadmin/strmadmin
Connected.
SQL> col SOURCE_DATABASE for a22
SQL> select source_database,source_object_owner,source_object_name,source_object_type,instantiation_scn
2 from dba_apply_instantiated_objects;
SOURCE_DATABASE SOURCE_OBJ SOURCE_OBJECT_NAME SOURCE_OBJE INSTANTIATION_SCN
SOURCE.WORLD TEST TEST_NEW_TABLE TABLE 9886497863438
SQL> select SOURCE_DATABASE,SOURCE_SCHEMA,INSTANTIATION_SCN from
2 dba_apply_instantiated_schemas;
SOURCE_DATABASE SOURCE_SCHEMA INSTANTIATION_SCN
SOURCE.WORLD TEST 9886497863438
SQL> select * from global_name;
GLOBAL_NAME
TARGET.WORLD
SQL> conn test/test
Connected.
SQL> select object_name,object_type,status from user_objects;
OBJECT_NAME OBJECT_TYPE STATUS
TEST_VIEW VIEW VALID
PRC1 PROCEDURE VALID
TRG1 TRIGGER VALID
FUN1 FUNCTION VALID
TEST_NEW_TABLE TABLE VALID
5 rows selected.
These Functions, Views, Procedure, Trigger are created on the source and got replicated automatically to the target site TARGET.WORLD. And note that none of these objects are appearing in DBA_APPLY_INSTANTIATED_OBJECTS view.
I have used the above given rules for capture. For propagation I dont have a ruleset itself and for apply I have same rules as of the capture rules.
Please verify your environment and let me know if you need further help.
Thanks,
Rijesh

Can you export slideshows other than .mov format?

I created a slideshow and would like to play it on my PS3, on the higest resolution possible. PS3 does not recognize quicktime movies, so I am trying to save it as an MP4. The option seems to be there when I save the file, even in custom export. There is a field that says "export movie to/as MP4". When the export is done, the file is still a quicktime movie! Anyhelp is greatly appreciated.

In the export drop down there is a Custom option and you can explore the many, many options under that heading.
There is no right answer that anyone can give you from here as there are far too many variables: The quality of the original photos, the quality of the playback engine on your PS3, the screen you are displaying on etc etc.
Regards
TD

Table formats

Hi All,
I have a report in vertical tab format.
There are 2 users and they want to see the same report in 2 different formats like
user1 wants to see the same report in Horizontal Table format
user2 wants to see the same report in any other format but not in vertical tab..
Please help .

In the same report, create two tabs name it vertical and horizantal
one tab for Vertical format and the other for Horizantal tab format.
So users depends on their requirement, they can view the right one.

Table of Contents Section Formatting Issues

Anyone have any ideas as to why this is happening in the Table of Contents? It seems that if I have more than 10 sections in a chapter that it pushes the info to the right side of the text box.
In section 10.10 all my text (for the title) is formatted to the left, and I can't figure out why the TOC is displaying it like this... pretty annoying...
Any help would be much appreciated.
Andrew

First off, thanks for the book K T, it's a great edition to my learning how to use iBooks Author, but it was no help. After playing around and becoming quite frustrated I started digging around in the the TOC I've figured out how to format the TOC a cross the entire book - getting rid of the formatting issue awonacott is experiencing. I too am (was) experiencing that TOC formatting issue. Here's what I did to rectify it:
1: Go into your TOC.
2. Go into any Section heading list and double click, then change the TOC to TOC Heading 1, 2, or 3.
For some reason the default TOC gets all wonky when you try to insert a section into an already created chapter. I was having this funny formatting happen to all sections of the iBook I'm creating, not just beyond the 10th section.
I refused to just deal with this crazy formatting, as I believe you should be able to add as many sections as you please without having to trim it down to fit within a 10 sections.
Anyways I hope this helps.
Semper Fidelis,
Tomas

How to insert a table or object image other than at bottom or report

Please excuse my HTML ignorance. Is there a way to use a previously added tag to go back and insert a FP object at the tag location in an HTML report. The only way I can figure out how to do it would be to append the object using the report generation vis, then search the HTML document for the originally added tag, and replace this tag with the appended code.
I append teat results as they are generated but once all tests are complete, I want to put the summary table at the top (after the header though).
Thanks, Rick

Hi Rick,
There is no built-in way with the Report Generation VIs to append something to your report anywhere other than the very bottom. I have attached a VI that shows the best way I can think of to accomplish this...it involves using an internal Report Generation VI called "Generate Report Get Data.vi" that gets the actual string that contains all your HTML from the internal data structure of the Report Generation VIs...once you have this string, you can manipulate it with the normal String functions in LabVIEW...then once you've got it manipulated the way you want, you can stick it back into your report.
I hope this gets you started in the right direction...I saved the VI in LabVIEW 8.0 format. Let me know if you have any other questions.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Custom_HTML_Report_Append.vi ‏31 KB

Reports: Other Than Tables, Format Issue, Content

Similar Messages

Maybe you are looking for