Reports registraion in oracle Apps 11i - Language problem

Hello,
I have registered a parametric report in Oracle Applications 11i. It completed successfully but output is in French language not US. What to do with to resolve this issue? I have tried its output with Text type format but problem with this format is logo & formatting of report disappears. I want to report in PDF Format and US Language, Can anyone help plz!
Thanks,
Regards!

Thanks for the reply.
I copied all the files (gnumake.exe, cc.exe, link.exe, which.exe) to windows\system32 folder. Still getting the same problem.
I am aable to run the same commands from cmd prompt and through cygwin but when rapidinstall runs they are not working.
G:\>which cmd
/cygdrive/c/WINDOWS/system32/cmd
G:\>which gnumake
/cygdrive/c/WINDOWS/system32/gnumake
G:\>which cc
/cygdrive/c/WINDOWS/system32/cc
G:\>which link
/cygdrive/c/WINDOWS/system32/link

Similar Messages

Skip report parameter in Oracle Apps 11i

I have 3 parameters for a new report: P1 (constant value, A, B), P2 and P3.
When executing this report in Oracle Apps 11i, how can I have the keyboard cursor skip or jump automatically to parameter P2 after I have selected P1 = 'A' (Grayed out P3) ?
Similarly, the keyboard cursor should skip or jump automatically to parameter P3 after I have selected P1 = 'B' (Grayed out P2) ?
Any idea? All suggestions welcome ....

hi,
I think u hav to create a dummy trigger to skip/jump parameters
Cheers,
veer

Oracle Apps 11i Reports

Hi,
we are working in oracle apps 11i. I have an application report developed by an ex-employee that I would like to add a new parameter to .
I use reports builder 6i . The reports consists of 6 queries and I'm facing the following issues:
1. when running the report from Oracle Reports builder I can use the second parameter. But from the application request form the report generates no data when the very same set of parameters is used. What can be the problem? What do I need to check?
2. Can I outer join the queries in reports builder .If yes, how can I do that? From where?
Regards,

Pl also post this in the Reports forum - Reports
HTH
Srini

Registering oracle forms and reports in oracle apps 11i

Hi all
I am a newbie to oracle apps
could someone please help me with registering oracle forms and reports in oracle apps 11i
thanking in advance
regards
oracle user

Hi,
regarding adding (Add (C:\ABC) to FORMS60_PATH in the registry) could you please explain
compilation is by f60gen @ (is this right?)Correct, the syntax of using f60gen is explained in (Note: 130686.1 - How to Generate Form, Library and Menu for Oracle Applications).
The place where i am working has apps installed in IBM AIX server .. so how do i access Apps
or can i access Apps via TOAD.You will have to access the server using ftp to download the pll files to your local machine. TOAD can be used to access the database objects only (not the physical application files).
Regards,
Hussein

Sending PO data from Oracle APPS 11i to another Oracle APPS 11i

I am trying to send the XML message (Purchase Order Data) from the Oracle APPS 11i to the other Oracle APPS 11i using XML Gateway and the AQ Adaptors in both outbound and inbound. I have created the Receive Activity for Outbound AQ Adaptor and the Invoke Activity for the Inbound AQ Adaptor and the Assign Activity in the middle to assign the variables for both Receive and Invoke Acvities.
I have created a partner link using AQ adapter to Dequeuing the data from Oracle APPS 11i that generated by XML Gateway and also have created a partner link using AQ adapter to Enqueuing the data.
When I run, it gives me an error on the Enqueuing side with the followings:
[2006/04/04 10:03:57] New instance of BPEL process "XML2APPS" initiated (# "18").
<process>
<sequence>
AQ_Receive
[2006/04/04 10:03:57] Received "Receive_Dequeue_InputVariable" call from partner "PO_IN_QUEUE" More...
<Receive_Dequeue_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ReceiveDocument">
<PROCESS_PO_007>
<CNTROLAREA>
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="PO">PO</NOUN>
<REVISION value="007">007</REVISION>
</BSR>
<SENDER>
<LOGICALID>ORACLE</LOGICALID>
<COMPONENT>PURCHASING</COMPONENT>
<TASK>POISSUE</TASK>
<REFERENCEID>VIS.US.ORACLE.COM:oracle.apps.po.event.xmlpo:32570-148852</REFERENCEID>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>US</LANGUAGE>
<CODEPAGE>UTF8</CODEPAGE>
<AUTHID>APPS</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>02</MINUTE>
<SECOND>29</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
</CNTROLAREA>
<DATAAREA>
<PROCESS_PO>
<POORDERHDR>
<DATETIME qualifier="DOCUMENT" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>00</MINUTE>
<SECOND>45</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="EXTENDED" type="T">
<VALUE>267</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM />
</OPERAMT>
<POID>4484</POID>
<POTYPE>STANDARD</POTYPE>
<ACKREQUEST>N</ACKREQUEST>
<CONTRACTB />
<CONTRACTS />
<DESCRIPTN />
<PORELEASE />
<USERAREA>
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<FOB>
<DESCRIPTN>Vendor's responsibility ceases upon transfer to carrier</DESCRIPTN>
<TERMID>Origin</TERMID>
</FOB>
<TANDC />
<FTTERM>
<DESCRIPTN>No Freight Charge</DESCRIPTN>
<TERMID>NONE</TERMID>
</FTTERM>
<EXCHRATE />
<DATETIME qualifier="EXCHRATEDATE">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="APPREQ" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<CONFIRM>N</CONFIRM>
<SHIPPINGCONTROL />
<DFFPOHEADER>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFPOHEADER>
<PCARDHDR>
<MEMBERNAME />
<PCARDNUM />
<DATETIME qualifier="EXPIRATION">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<PCARDBRAND />
</PCARDHDR>
</USERAREA>
<PARTNER>
<NAME index="1">Nate OD88/VIS2 Supplier TEST</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>20027</PARTNRID>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX>1923</PARTNRIDX>
<TAXID />
<TERMID />
<USERAREA>
<DFFVENDOR>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDOR>
<CUSTOMERNUM />
</USERAREA>
<ADDRESS>
<ADDRLINE index="1">VIS2 address</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN>VIS2/OD88 SITE</DESCRIPTN>
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA>
<DFFVENDORSITE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDORSITE>
</USERAREA>
</ADDRESS>
<CONTACT>
<NAME index="1" />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1">-</TELEPHONE>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>SoldTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TAXID />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1">Ross, Nate</NAME>
<CONTCTTYPE />
<DESCRIPTN />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
<USERAREA />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>BillTo</PARTNRTYPE>
<CURRENCY />
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
</PARTNER>
<PARTNER>
<NAME index="1">UPS</NAME>
<ONETIME>0</ONETIME>
<PARTNRID />
<PARTNRTYPE>Carrier</PARTNRTYPE>
<PARTNRIDX>UPS</PARTNRIDX>
</PARTNER>
<POTERM>
<DESCRIPTN>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</DESCRIPTN>
<TERMID>45 Net (terms date + 45)</TERMID>
<DAYSNUM />
<QUANTITY qualifier="PERCENT">
<VALUE />
<NUMOFDEC />
<SIGN />
<UOM />
</QUANTITY>
<USERAREA />
</POTERM>
</POORDERHDR>
<POORDERLIN>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>89</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM>QT</UOM>
</OPERAMT>
<POLINENUM>1</POLINENUM>
<HAZRDMATL />
<ITEMRV>0</ITEMRV>
<ITEMRVX />
<POLNSTATUS />
<DESCRIPTN>10-40W Car / Truck Motor Oil</DESCRIPTN>
<ITEM>10-40W Oil</ITEM>
<ITEMX />
<USERAREA>
<REQUESTOR />
<CATEGORYID>MISC.MISC</CATEGORYID>
<CONTRACTNUM />
<CONTRACTPONUM />
<CONTRACTPOLINENUM />
<VENDORQUOTENUM />
<CONFIGID />
<LISTPRICE>.89</LISTPRICE>
<MARKETPRICE />
<PRICENOTTOEXCEED />
<NEGPRICE>N</NEGPRICE>
<TAXABLE>N</TAXABLE>
<TXNREASONCODE />
<TYPE1099 />
<LINEORDERTYPE>Goods</LINEORDERTYPE>
<HAZRDUNNUM />
<HAZRDUNDESC />
<DFFLINE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFLINE>
<DFFITEM>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10>Y</ATTRIBUTE10>
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFITEM>
<KFFITEM>
<ATTRIBUTE1>MISC</ATTRIBUTE1>
<ATTRIBUTE2>MISC</ATTRIBUTE2>
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
<ATTRIBUTE17 />
<ATTRIBUTE18 />
<ATTRIBUTE19 />
<ATTRIBUTE20 />
</KFFITEM>
<GLOBALCONTRACT />
<GLOBALCONTRACTLIN />
<JOBTITLE />
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
<CONTRACTORFIRSTNAME />
<CONTRACTORLASTNAME />
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
</USERAREA>
<POLINESCHD>
<DATETIME qualifier="NEEDDELV" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<DESCRIPTN />
<PSCLINENUM>1</PSCLINENUM>
<USERAREA>
<DATETIME qualifier="PROMSHIP">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<DATETIME qualifier="APPROVAL">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>08</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>.89</VALUE>
<NUMOFDEC />
<SIGN />
<CURRENCY>USD</CURRENCY>
<UOMVALUE />
<UOMNUMDEC />
<UOM />
</OPERAMT>
<PRICEOVRRD />
<TAXABLE>N</TAXABLE>
<TAXCODE />
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>ShipTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY />
<COUNTRY />
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN />
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1" />
<ONETIME />
<PARTNRID />
<PARTNRTYPE />
<PARTNRIDX />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRTYPE />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<DROPSHIPDETAILS>
<DROPSHIPMENT />
<DROPSHIPCUSTNAME />
<SHIPINSTR />
<PACKINSTR />
<SHIPMETHOD />
<CUSTOMERPONUM />
<CUSTOMERLINENUM />
<CUSTOMERSHIPNUM />
<CUSTOMERDESC />
</DROPSHIPDETAILS>
<CONSIGNEDINV>N</CONSIGNEDINV>
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
</USERAREA>
</POLINESCHD>
</POORDERLIN>
</PROCESS_PO>
</DATAAREA>
</PROCESS_PO_007>
</part>
</Receive_Dequeue_InputVariable>
Assign_Input2Output
[2006/04/04 10:03:57] Updated variable "Invoke_Enqueue_InputVariable" More...
<Invoke_Enqueue_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ReceiveDocument">
<ReceiveDocument xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<CNTROLAREA xmlns="">
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="PO">PO</NOUN>
<REVISION value="007">007</REVISION>
</BSR>
<SENDER>
<LOGICALID>ORACLE</LOGICALID>
<COMPONENT>PURCHASING</COMPONENT>
<TASK>POISSUE</TASK>
<REFERENCEID>VIS.US.ORACLE.COM:oracle.apps.po.event.xmlpo:32570-148852</REFERENCEID>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>US</LANGUAGE>
<CODEPAGE>UTF8</CODEPAGE>
<AUTHID>APPS</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>02</MINUTE>
<SECOND>29</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
<PROCESS_PO>
<POORDERHDR>
<DATETIME qualifier="DOCUMENT" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>00</MINUTE>
<SECOND>45</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="EXTENDED" type="T">
<VALUE>267</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM />
</OPERAMT>
<POID>4484</POID>
<POTYPE>STANDARD</POTYPE>
<ACKREQUEST>N</ACKREQUEST>
<CONTRACTB />
<CONTRACTS />
<DESCRIPTN />
<PORELEASE />
<USERAREA>
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<FOB>
<DESCRIPTN>Vendor's responsibility ceases upon transfer to carrier</DESCRIPTN>
<TERMID>Origin</TERMID>
</FOB>
<TANDC />
<FTTERM>
<DESCRIPTN>No Freight Charge</DESCRIPTN>
<TERMID>NONE</TERMID>
</FTTERM>
<EXCHRATE />
<DATETIME qualifier="EXCHRATEDATE">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="APPREQ" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<CONFIRM>N</CONFIRM>
<SHIPPINGCONTROL />
<DFFPOHEADER>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFPOHEADER>
<PCARDHDR>
<MEMBERNAME />
<PCARDNUM />
<DATETIME qualifier="EXPIRATION">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<PCARDBRAND />
</PCARDHDR>
</USERAREA>
<PARTNER>
<NAME index="1">Nate OD88/VIS2 Supplier TEST</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>20027</PARTNRID>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX>1923</PARTNRIDX>
<TAXID />
<TERMID />
<USERAREA>
<DFFVENDOR>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDOR>
<CUSTOMERNUM />
</USERAREA>
<ADDRESS>
<ADDRLINE index="1">VIS2 address</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN>VIS2/OD88 SITE</DESCRIPTN>
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA>
<DFFVENDORSITE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDORSITE>
</USERAREA>
</ADDRESS>
<CONTACT>
<NAME index="1" />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1">-</TELEPHONE>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>SoldTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TAXID />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1">Ross, Nate</NAME>
<CONTCTTYPE />
<DESCRIPTN />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
<USERAREA />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>BillTo</PARTNRTYPE>
<CURRENCY />
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
</PARTNER>
<PARTNER>
<NAME index="1">UPS</NAME>
<ONETIME>0</ONETIME>
<PARTNRID />
<PARTNRTYPE>Carrier</PARTNRTYPE>
<PARTNRIDX>UPS</PARTNRIDX>
</PARTNER>
<POTERM>
<DESCRIPTN>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</DESCRIPTN>
<TERMID>45 Net (terms date + 45)</TERMID>
<DAYSNUM />
<QUANTITY qualifier="PERCENT">
<VALUE />
<NUMOFDEC />
<SIGN />
<UOM />
</QUANTITY>
<USERAREA />
</POTERM>
</POORDERHDR>
<POORDERLIN>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>89</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM>QT</UOM>
</OPERAMT>
<POLINENUM>1</POLINENUM>
<HAZRDMATL />
<ITEMRV>0</ITEMRV>
<ITEMRVX />
<POLNSTATUS />
<DESCRIPTN>10-40W Car / Truck Motor Oil</DESCRIPTN>
<ITEM>10-40W Oil</ITEM>
<ITEMX />
<USERAREA>
<REQUESTOR />
<CATEGORYID>MISC.MISC</CATEGORYID>
<CONTRACTNUM />
<CONTRACTPONUM />
<CONTRACTPOLINENUM />
<VENDORQUOTENUM />
<CONFIGID />
<LISTPRICE>.89</LISTPRICE>
<MARKETPRICE />
<PRICENOTTOEXCEED />
<NEGPRICE>N</NEGPRICE>
<TAXABLE>N</TAXABLE>
<TXNREASONCODE />
<TYPE1099 />
<LINEORDERTYPE>Goods</LINEORDERTYPE>
<HAZRDUNNUM />
<HAZRDUNDESC />
<DFFLINE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFLINE>
<DFFITEM>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10>Y</ATTRIBUTE10>
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFITEM>
<KFFITEM>
<ATTRIBUTE1>MISC</ATTRIBUTE1>
<ATTRIBUTE2>MISC</ATTRIBUTE2>
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
<ATTRIBUTE17 />
<ATTRIBUTE18 />
<ATTRIBUTE19 />
<ATTRIBUTE20 />
</KFFITEM>
<GLOBALCONTRACT />
<GLOBALCONTRACTLIN />
<JOBTITLE />
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
<CONTRACTORFIRSTNAME />
<CONTRACTORLASTNAME />
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
</USERAREA>
<POLINESCHD>
<DATETIME qualifier="NEEDDELV" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<DESCRIPTN />
<PSCLINENUM>1</PSCLINENUM>
<USERAREA>
<DATETIME qualifier="PROMSHIP">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<DATETIME qualifier="APPROVAL">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>08</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>.89</VALUE>
<NUMOFDEC />
<SIGN />
<CURRENCY>USD</CURRENCY>
<UOMVALUE />
<UOMNUMDEC />
<UOM />
</OPERAMT>
<PRICEOVRRD />
<TAXABLE>N</TAXABLE>
<TAXCODE />
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>ShipTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY />
<COUNTRY />
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN />
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1" />
<ONETIME />
<PARTNRID />
<PARTNRTYPE />
<PARTNRIDX />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRTYPE />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<DROPSHIPDETAILS>
<DROPSHIPMENT />
<DROPSHIPCUSTNAME />
<SHIPINSTR />
<PACKINSTR />
<SHIPMETHOD />
<CUSTOMERPONUM />
<CUSTOMERLINENUM />
<CUSTOMERSHIPNUM />
<CUSTOMERDESC />
</DROPSHIPDETAILS>
<CONSIGNEDINV>N</CONSIGNEDINV>
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
</USERAREA>
</POLINESCHD>
</POORDERLIN>
</PROCESS_PO>
</DATAAREA>
</ReceiveDocument>
</part>
</Invoke_Enqueue_InputVariable>
Invoke_QUEUE (faulted)
[2006/04/04 10:03:59] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/d01/oraAS/integration/orabpel/domains/default/tmp/.bpel_XML2APPS_1.0.jar/CreatePO.wsdl [ Enqueue_ptt::Enqueue(ReceiveDocument) ] - WSIF JCA Execute of operation 'Enqueue' failed due to: Enqueue failed. Enqueue failed. ; nested exception is: ORABPEL-11947 Enqueue failed. Enqueue failed. Please examine the log file to determine the problem.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</remoteFault>
WS-T Complete
WS-T Close
WS-T Fault
WS-T Cancel
WS-T Compensate
</sequence>
[2006/04/04 10:03:59] "BPELFault" has not been caught by a catch block.
[2006/04/04 10:03:59] BPEL process instance "18" cancelled
WS-T Complete
WS-T Close
WS-T Fault
WS-T Cancel
WS-T Compensate
</process>
Does anyone know where I can get help on an error message ORABPEL-11947? I looked everywhere but no success.
Can someone help me on this?
Thanks in advance,
Sook

You have to integrate apps with BPEL using apps adapter and then from BPEL pass the message to Oracle B2B 11g -
Oracle B2B 11g <---> Oracle BPEL 11g <--- Oracle Apps Adapter --> Oracle Apps
As BPEL and B2B both are part of SOA suite 11g hence there is no additional cost and performance remain better.
Preffered mode of integration would be through XML gateway.
I could see that 856 outbound EDI map is available from Oracle but not the XML gateway map. If i have to use XML gateway then how i can create the XML gateway map.You may raise your question in apps forum -
http://forums.oracle.com/forums/category.jspa?categoryID=108
If you don't get any help there, raise a case with support.
Regards,
Anuj
Edited by: Anuj Dwivedi on Oct 12, 2010 11:58 AM

Concurrent Manager Issue in Oracle Apps 11i on MS Windows 2003

Hi,
We have Oracle Apps 11i (11.5.10) on Windows 2003 running Oracle Financilas and Supply Chain.
From this morning onwards, concurrent requests are not getting completed. All requests are showing Running Normally. I checked the server (Single Node 4 GB Memory) and CPU usage is more than 90%. Task Manager is showing 50% CPU usage for SYSTEM (Image Name). Once the CPU usage for SYSTEM(image name) goes beyond 40% then the server is becoming slow and the problem starts.
When I stop the Concurrent Manager it does not stop and I have to End Process the FNDLIBR process manually.
I have recreated the concurrent manager using CCMSETUP and also ran cmclean.sql. Nothing is helping.
System is Live since 2006 and the issue started only today.
Please suggest any solutions as this is happening in our Production system.
Thanks.
Thiru

Thiru,
Which concurrent manager consumes the CPU usage? Are you able to identify it?
Any errors in the CM log file? Did you try to start the CM with diag=y and see if any errors are reported in the log files?
What happen to the CPU usage when you stop the CM?
I assume that you are running Purge Concurrent Manager/Requests on regular basis, so this should not be an issue here.
Please review the following notes, and see if it helps.
Note: 114380.1 - Concurrent Manager Processes Taking Lots of CPU
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=114380.1
Note: 264752.1 - FNDLIBR Consuming Memory Causing CPU Utilization To Increase Daily
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=264752.1
System is Live since 2006 and the issue started only today.I assume no changes have been done recently, correct?
Regards,
Hussein

Installation of Oracle Apps 11i

I have purchased Oracle Apps 11i(One month license) around two months back. Will it be a problem if I install after 30 days of purchase?(I have back dated the host by two months.
The Host Name is Ciber.
I tried to load Vision demo on WIN NT6.0 SP6 by giving DNS Domain name by
right click Network Neighbourhood/Protocols/Double Click on TCP/IP Protocal and giving DNS Domain Name as 'applic'.
and it was pinging when I give 'ping ciber.applic'
While installing Vision Demo the system allotted web port as 8002. No errors reported while installing Oracle Apps.
If I give the following command at the browser
http://ciber.applic:8002 it says error 430 unable to resolve host name ciber.applic
however the application home page was coming if I give the host IP address at the browser as http://192.168.245.200:8002.
But if I click on any of the links it is going to ciber.applic and error 430 is coming.
Then I have loaded Windows 2000 Professional and tried the following.
Right click on Mynetwork places/Properities then Right Click on Local Area Connection Double Click on Internet Protocol(TCP/IP)and I gave the the same value '192.168.245.200'for IP Address and preferred DNS server.
Click on 'Advanced' click on DNS I have added 192.168.245.200 as DNS server addresses in order of use. I gave DNS suffix for this connection as 'applic' and Installed Vision demo. No errors reported while installing Oracle Apps.
If I give the following command at the browser
http://ciber.applic:8002 it says error 430 unable to resolve host name ciber.applic
however the application home page was coming if I give the host IP address at the browser as http://192.168.245.200:8002.
But if I click on any of the links it is going to ciber.applic and error 430 is coming.
I am not able to understand where I am doing mistake.
Can any one help me out to sort out the problem?
Thanks in advance
P.Ratna Prasad

Ratna,
You can write the IP and the hostname in the hosts file in the "C:\WINNT\System32\Drivers\etc\" directory. For e.g. if your IP address is 192.168.1.1 and your hostname is "RatnaPC" then you should write like this on a new line in the "hosts" file:
192.168.1.1 RatnaPC
Don't forget to hit the return key at the end of the line to bring it to the next line!!!
This for sure will help in resolving the hostname.
Best Regards,
Srinivas Aekbote

Error while clonning Oracle app 11i

Hi all Once again, a new day a new error :)
i am having Error while clonning Oracle app 11i on windows 2003 sp1 32 bit db 9.2.0.6.0
when running adcfgclone.pl dbTier it successfully runs uptill 70% at this stage it throws the below error
================================================================================================
Beginning database tier Apply - Wed Mar 7 01:49:19 2012
Log file located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
=================================================================================================
when i check the ApplyDBTier_03070149.log
i found this below
==============================================================================================================================================================================================================================
Skipping Profile Phase
Skipping Apply Phase
Executing StartDbLsnr...
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
     "d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process NPRO ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCNPRO))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=hassan.com)(Port=1534))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
NL-00280: error creating log stream d:\oracle\neproddb\9.2.0\network\log\npro.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
.end std out.
.end err out.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
     "d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt"
ECHO is off.
ECHO is off.
Creating the control file for NPRO database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd exiting with status 1
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:474)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
     at java.lang.reflect.Constructor.newInstance(Native Method)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
     at java.lang.Thread.run(Unknown Source)
==============================================================================================================================================================================================================================
please help me out with your advices
Thanks
Hassan

Dear Hussein / helios ,
it worked finally i gave a high number 76 and it worked with out any problem also this time i gave loop back adapter an ip address i just remember now that i was not giving an ip to my loop back adapter i gave as below
ip : 10.10.10.10
subnet : 255.255.255.0
and made my host file look like as
127.0.0.1 localhost
10.10.10.10 hassan.com hassan
then i tested the ping by pinging hassan.com and the reply came from 10.10.10.10
and also i disabled my wireless network card before running adcfgclone
and it worked ALLHAMDOLLILAH :)
Thanks to the great masters Hussein & Helios :)
Now its time for appsTier cloning hope that it goes smooth :)
Regards,Re: Error while clonning Oracle app 11i
Hassan

Registering Forms in Oracle Apps 11i

Hi hussein,
This is the docs for registering an Oracle Form in Oracle Apps 11i.
To Register a custom form in Oracle Applications, take the following steps.
(As practice, copy the form FNDRSRUN.fmx under the $FND_TOP/forms to a file
called RUNRPT.fmx. The form RUNRPT.fmx will now be used in the following steps.)
1.Log into the Applications Developer responsibility
2.Navigate to Application > Form
3.Enter the form name under the "Form" column
     RUNRPT
4.Enter the Application under the "Application" column using the list of value
button, or the "List of Values" function under the "Edit" menu option.
     Application Object Library
5.Enter a name for the form under the "User Form Name" column
     My Report Run Form
6.Enter a description for the form under the "Description" column
     Custom Report Run Form
7.Save
[\code]
My question is, how do I run the form in the Oracle Apps? After registering it.
And this is also another doc:Rgistering form will takes following steps
1) Create custom form
2) place it in CUSTOM_TOP in unix box
3) compile form with f60 gen and check whether compiled form .fmx is generated.
4) register your from
Registering a Form
Navigation – Application Developer -> Application->Form
5) Register Form Functions
Navigation – Application Developer -> Application->Function
6) attach it to menu.
7) menu must be submenu to menu or attached as to responsibility from which you are going to run form.
For report we are attaching concurrent program to responsibility but here form function must be attached to Menu.
My question is, how do I know if a form has a function that needs to be registered?
Thanks a lot
msk

Hi,
My question is, how do I run the form in the Oracle Apps? After registering it.You already have the steps in your post, just add the form to the menu and attach it to the responsibility.
My question is, how do I know if a form has a function that needs to be registered?Sorry, I cannot be of much help here, but you may check the Developer Guide and see if it helps.
Oracle Applications Developer's Guide
http://download.oracle.com/docs/cd/B25284_01/current/acrobat/115devg.pdf
Regards,
Hussein

Oracle 10g AS pacth for Oracle Apps 11i

Hi everyone,
I have installed Oracle 10g AS (10.1.2.0.2) for Oracle Business Intelligence on Sun Solaris 10 (64 bit) and integrated it with Oracle Apps 11i (11.5.10.2).
Everything seems fine but i am facing problems like
1) Toolbars not appearing correctly sometimes like it is disabled and enables by itself.
2)sometimes clients come accross "Connection with Server lost..." error while taking export (very few).
3) Its giving the error (mentioned at the end) only on one client machine while taking export to Excel.
I have tried installing Oracle 10g AS patch set 2 10.1.2.2 for Solaris but the problem persisits. Is patch set 2 compatible or certified with Oracle Apps 11i? if not then is there any other work around or do i have to wait for some new patch.
Thanx for your inputs.
Najeeb
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\ASHIBEL
Proxy Configuration: Manual Configuration
Proxy: http=EMRPXY1:80,https=EMRPXY1:80,ftp=EMRPXY1:80,gopher=EMRPXY1:80
Proxy Overrides: emrpxy1:80,<local>
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Installed custom security manager
Could not assertPermission PermissionID.SYSTEM for IE
This can cause "Warning : Applet Window" to be displayed when running with IE
attempt 1: adding Protocol.protocol -> rmi
attempt 1: adding default Protocol.timeoutsecs -> 40
attempt 1: adding RMIProtocol.transport -> http
attempt 1: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 1: adding RMIProtocol.hijacksessionid -> 1
attempt 1: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 1: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
attempt 2: adding Protocol.protocol -> rmi
attempt 2: adding default Protocol.timeoutsecs -> 40
attempt 2: adding RMIProtocol.transport -> https
attempt 2: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 2: adding RMIProtocol.hijacksessionid -> 1
attempt 2: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 2: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
Discoverer Model - 10.1.2.48.18
New LOOKUP
Lookup Requested
Performing lookup RMI lookup: http://discoverer.emaar.ae:7777//discoverer/plus
Reading bytes from input stream
Unmarshalling response
Session ID:2007061817102717616
BI Beans Graph version [3.2.2.0.24]
BI Beans Graph version [3.2.2.0.24]
The export/print operation failed
Worker oracle.disco.publish.PublishData@6ffeb, command=ExportData failed with DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0 wrapping exception oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
Error: DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
     at oracle.disco.remote.corba.RMIToCorba.convertRemoteException(Unknown Source)
     at oracle.disco.model.corbaserver.ModelInterface._handleGenericExceptions(Unknown Source)
     at oracle.disco.model.corbaserver.ModelInterface.getBinaryData(Unknown Source)
     at oracle.disco.model.corbaserver.ModelInterface.GetBinaryData(Unknown Source)
     at oracle.disco.model.corbaserver.serverrequest.DsrBinaryExport.xmlUpdateServer(Unknown Source)
     at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(Unknown Source)
     at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
     at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
     at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
     at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
     at oracle.disco.model.corbaserver.export.ExportInputStream._readBuffer(Unknown Source)
     at oracle.disco.model.corbaserver.export.ExportInputStream.read(Unknown Source)
     at java.io.InputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at oracle.disco.publish.PublishData._writeBinaryData(Unknown Source)
     at oracle.disco.publish.PublishData._exportSheets(Unknown Source)
     at oracle.disco.publish.PublishData.runDiscoWorker(Unknown Source)
     at oracle.disco.worker.DiscoWorker.runWorker(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorker.run(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue._runWorker(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue.access$100(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._run(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._runMaybeBlocked(Unknown Source)
     at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext.run(Unknown Source)
     at oracle.bali.ewt.worker.ThreadWorkerQueue$TaskAdapter.runTask(Unknown Source)
     at oracle.bali.share.thread.TaskScheduler.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.processTask(Unknown Source)
     at oracle.bali.share.thread.TaskScheduler$TaskQueue.run(Unknown Source)
     at oracle.bali.share.thread.Timer.doRun(Unknown Source)
     at oracle.bali.share.thread.Timer.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi
The last I heard is that 10.1.2.2 is not yet certified for use against E-Business Suite unless your operating system is Linux. Please take a look at this posting on Steven Chan's blog: http://blogs.oracle.com/schan/2007/04/23
The issues you are encountering, particularly the one with the toolbars disappearing, were fixed in patch 5345528 as described on my blog here: http://learndiscoverer.blogspot.com/2006/08/more-to-toolbar-icons-graying-out.html
I would advise you to go for this patch first until Oracle certify 10.1.2.2. for Sun.
Best wishes
Michael

Can't we update the mesages after ceated messages in oracle apps 11i

Hi All,
i have created message and ran the concurent programme of generate message in 11i, after that i have called that message name into jdeveloper. message is displaying correctly. i am trying to update the message which i have created and again ran the concurent programme. but updated message is not reflected. its shwing old message.
Can't we update the mesages after ceated messages in oracle apps 11i? if so what is the process.
can any one know the process.
Thanks and Regards,
krishna

Kindly check in AOL and confirm that the message is changed. Also make sure the Jdeveloper code refers to the message code and the language for which the message text is set correctly. Thereafter delete the myclasses file and run the code again. Updated message should be shown.
Regards
Sumit

Installation of Oracle Apps 11i Realese 5 with 11.5.6 Family Pack

I am having problem starting the installation of this program.......Oracle Apps 11i Realese 5. I have Windows 2000 and would like to do CD installation rather than Stage installation.
I have downloaded and ran the JDK-1_1_8_009-Win. Here are the steps taken: I inserted the Red CD "Start Here" in my CD-ROM, opened the DOS prompt, and changed the C:> prompt to E:> prompt which is my CD-ROM drive, I then typed E:>cd rapidwiz....Enter, this opens E:\rapidwiz>, I then typed rapidwiz.cmd which was supposed to open my Oracle Universal Installer, butI got: E:\rapidwiz>start.\bin\launch.exe.RapidWiz.cL
E:\rapidwiz>
What do I do from here, do I insert the Disk 1 or what, because I have 14 CD's to be installed.

Hi Timi,
Nice to see that you're involved in the setup of Oracle Applications 11.5.5. I see that you've run into a few roadblocks and while I am sure that I have a solution to the problem you're facing, it's a tad too long to get into on this forum.
If you could get in touch with me via E-Mail ([email protected]) or call me at 732 423 8023 (I'm available after 8pm EST), I'd be glad to help you out. Forgive me for saying so but the installation process is rather long and I have no desire to outline the entire process here.
Just curious, are you professionally associated with Oracle Applications or does it stem from a personal interest ?
I look forward to hearing from you.
Best Wishes,
Rajesh Aialavajjala

Oracle Apps 11i Profile Option

Hello All,
I Have install oracle apps 11i Vision Demo ,
I have Problem of Profile Option ,
When i m Enter in Payable Module and click on invoice Batches
it Gives me Error Contact System Administrator to Enable the
Invoice Batach form in Profile Option .
How to Enable Form in Oracle Apps 11i
Thanks
Please Help Me.

To use batches in AP, you need to enable a profile option.
Can not remember the exact name.
Log into system administrator responsibility and find for profiles starting with
AP% you should be able to determine what is related to enabling batches.
Set the profile to Yes

Oracle Apps 11i - Pasta Setup for Barcode print in rdf file

Hi All,
Since last some days i am trying to setup Oracle Apps 11i to print barcode reports (RDF files) from concurrent manager.
If anybody have any idea about how to configure pasta to print post script files which support barcode, please suggest.
I have already read many documents but not able to do that. In one of pasta document i found that, pasta support two type of TrueType font. One can be used for regular text and second can be used (bold) for barcode printing. But it shows barcode font as a regular font.
-Thanks.
Arun.

Please refer following notes:
Dynamically Switching Printer Trays [ID 66402.1]
How to Specify a Printer Paper Tray With Pasta [ID 241086.1]
thanks

Tuning Oracle APPS 11i Start with

Hi Hussain/Helios,
I am new to Oracle APPS, and am working oracle apps 11i 11.5.10.2 with 10.2.5.0, the database and application was upgraded by previous dba. which left almost 3-4 months before.
now my question is i want to have a performance tuning for Oracle apps environment, can you please suggest some key points for starting with and some good links for future usage.
Other thing is i have used find command on my linux box and found many log files which are greater than 1000K on apps tier (forms/reports/web), and similiarly db tier (db/admin/concurrent).
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.
APPS Tier folder locations.
****podappl/admin/PROD/log
****prodora/iAS/Apache/Apache/logs/sec_audit.log
****prodora/iAS/Apache/Jserv/logs/mod_jserv.log
****prodora/iAS/Apache/Jserv/logs/jserv.log
****prodcomn/admin/scripts/PROD_****/sqlnet.log
****prodcomn/admin/log/PROD_****/
****prodcomn/_pages/
****prodcomn/rgf/PROD_****/
****prodcomn/rgf/PROD_****/oam/
DB Tier files folder locations.
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/em-application.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_*****_PROD/log/http-web-access.log
****oracle/proddb/10.2.0/oc4j/j2ee/OC4J_DBConsole_****_PROD.upgrade/log/http-web-access.log
****oracle/proddb/10.2.0/appsutil/log/PROD_****/StageDBTier_10161830.log
****oracle/proddb/10.2.0/*****_PROD/sysman/log/emoms.log
****oracle/proddb/10.2.0/*****_PROD.upgrade/sysman/emd/sqlnet.log
****oracle/proddb/10.2.0/******_PROD.upgrade/sysman/log/
****oracle/prodappl/admin/PROD/log/For Performance Tuning, right now i have following points with me.
1). Compile APPS Schema in maintenace which i will take.
2). I have checked some Gather Stats/Purge jobs are already scheduled for maintenance.
Please tell me what other Jobs i can schedule using OAM for weekend for All tiers in APPS.
I have been also asked to apply latest patches on PROD APPS/DB/* system, I can check using sql, which patches are applied, but how can i know which patches are required, (don't know about the licensed products with never ask policy here).
Thanks,
RAJ
Edited by: 870344 on Jul 5, 2011 6:36 AM

can you please suggest some key points for starting with and some good links for future usage.Please check below MOS doc:-
A Holistic Approach to Performance Tuning Oracle Applications Systems [ID 69565.1]
Configuring various JVM tuning parameters for Oracle E-Business suite 11i and R12 [ID 567551.1]
Tuning is something that require more analysis less action, first you need to answer:-
1) Why do you need tuning? is it proactive or some incident happend?
2) Where are you facing issues? i.e. which module, form, report or whole application.
3) Number of users facing issues? i.e. is it single user, user at one location or all users.
4) Has something changed in past that might have triggered this need?
Theri are various components involved in tuning that start from :-
1) user machine
2) network
3) Application tier.
4) Database tier.
Application tier can be further divided into:-
1) Apache server(JVM, modplsql, jserv etc etc
2) Form Server
3) Concurrent processing server
4) Discovered if using,
5) XML publisher..
and like wise other component using.
If you are looking to tune then i believe start from application tier first, pick one by one componets, like if your users are facing issues with login then use note that i have provided, if users are not satisifed with time taken to complete concurrent request then you might have to tune it and likewise.
can i just remove all these logfiles using os (rm) command and is it feasible with production environment on running mode or is it not feasible and i should use some other ways/etc.Do not rm files because it might be in use by some process and ti might then not be able to release space, its better to trim the file. do cat file >
Log file you have mentioned can be removed depedning upon your company policy if any.
Thanks,
JD

Reports registraion in oracle Apps 11i - Language problem

Similar Messages

Maybe you are looking for