Reports: REP-0177 & REP-3000 errors :-( (RH 6.2.2 HA 1.0)

Hi Folks, hi Oracle,
we have some serious problems here with Oracle Reports 6i Patch 6 which is running under Red Hat HA (Red Hat 6.2.2 High Aviability Server 1.0, based on Zoot)
Because HA installs without X i have installed all needed X-packes to get a X11 system, and it runs fine.
Then i set up request for a reports from the console i get the following message:
[oracle@webserver1-do bin]$ ./rwcli60 REPORT=xxxx.rdf USERID=xxxxx/xxxxx@xxxx SERVER=xxxxx DESTYPE=SYSOUT DESFORMAT=PDF benu_id=x masszeile=xxx
REP-0177: Error while running in remote server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
If i change the DISPLAY to a faked adress, i become the 111-errors (cant connect to X11-Socket), so i think the repserver connects to X but have some other problems with X.
If i change DISPLAY to an another Linux-Server with fully installed X11 & KDE, the report runs fine.
And all the same if the call the report over apache.
I have read the Bug-Info about Bug 1108326, but i have the same, if i change the format to HTML.
Any suggestions?
H.-C.G|rsoy
null

hello,
be aware, that you have to set the display in the environtment of the server (meaning the startup-script of the server).
regards,
the oracle reports team

Similar Messages

REP-0177 & REP-3000 under Linux (Red Hat 6.2.2 HA 1.0)

Hi Folks, hi Oracle,
we have some serious problems here with Oracle Reports 6i Patch 6 which is running under Red Hat HA (Red Hat 6.2.2 High Aviability Server 1.0, based on Zoot)
Because HA installs without X i have installed all needed X-packes to get a X11 system, and it runs fine.
Then i set up request for a reports from the console i get the following message:
[oracle@webserver1-do bin]$ ./rwcli60 REPORT=xxxx.rdf USERID=xxxxx/xxxxx@xxxx SERVER=xxxxx DESTYPE=SYSOUT DESFORMAT=PDF benu_id=x masszeile=xxx
REP-0177: Error while running in remote server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
If i change the DISPLAY to a faked adress, i become the 111-errors (cant connect to X11-Socket), so i think the repserver connects to X but have some other problems with X.
If i change DISPLAY to an another Linux-Server with fully installed X11 & KDE, the report runs fine.
And all the same if the call the report over apache.
I have read the Bug-Info about Bug 1108326, but i have the same, if i change the format to HTML.
Any suggestions?
H.-C.G|rsoy
null

hello,
be aware, that you have to set the display in the environtment of the server (meaning the startup-script of the server).
regards,
the oracle reports team

REP-0177: An error occurred while running in a remote server.

I am getting the following errors while trying to run a report script. The report was created in Report Builder.
REP-0177: An error occurred while running in a remote server.
Reference parameter OT_RUN_DATE in the distribution list is invalid.
OT_RUN_DATE is a static field converting SYSDATE to a string (TO_CHAR(SYSDATE, 'YYYYMMDD')). Unfortunately, I inherited this report and did not create it. I do not know what purpose it serves but would like more insight into what the reference parameter and distribution list mean.
REP-0177: An error occurred while running in a remote server.
Too many errors pushed on the stack
I assume this is related to the first error but am not certain.
Any help is greatly appreciated...

Michel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

REP-3000 Error Message

I have install Web Reports Server 6i on Solaris 2.8 x_86 platform and i hav configure its above documentation. I can start it under OAS 4.0.7 web listener. Then, if i want to create the test report on the web, i receive an error message:
REP-3000: Internal error starting Oracle Toolkit.
Tell me please, what can i do.

You may be right. But in this case i don't know another plase, there nls-support (*.nlb) files are may be installd. In my $ORACLE_HOME there are no directory, naming like datad2k. I think, that Developer 2k use nls-support files from base nls directory, because i install if after RDBMS, but after installation of Developer 2k in the list of installed products i so, that it content the 8.0.6 NLS-Support Files and Libraris. I in the firm belief that it is not RDBMS files, becouse the version of RDBMS is 8.0.5.
It meens, that the cause of REP-3000 error is other. If you know some more about it, tell me please.
null

REP-3000 Error Urgent!!!

Hi, When I running report on Oracle 9iAs Rel2, I Receive REP-3000 error.
My Platform Info. : Linux Advanced server 2.1
I can run xclock on my linux box;
I Set NLS_Lang="SIMLIFIED CHINESE_CHINA.ZHS16GBK" in reports.sh
when I comment the NLS_LANG=.... in my reports.sh, I have not receive this error msg, But I can not see any chinese character, I only can see "????"
How to solve this problem?
Thank you very much !

My Platform Info. : Linux Advanced server 2.1I assume you mean Red Hat Linux Advance Server 2.1. There are too many Linuxes out there, so it's hard to tell without the vendor name.
I can run xclock on my linux box;Why does running xclock successfully always have to be the test? :-))
(Don't take me seriously, for I have no better suggestions)
I Set NLS_Lang="SIMLIFIED CHINESE_CHINA.ZHS16GBK" in
reports.sh
when I comment the NLS_LANG=.... in my reports.sh, I
have not receive this error msg, But I can not see
any chinese character, I only can see "????"I've noticed a few problems with NLS_LANG and rwservlet. Can you explain how you're running the report. What is the input, and whether you're using rwclient, rwservlet, rwrun, etc.? Also, if you could post the relevant portion of the server and engine trace files (<server></server>.trc and <server></server>-rwEng-0.trc).
-Manish

R25desm gives rep-3000 error

Hi,
I am trying to start reports2.5 in UNIX and I am using r25desm to start the report. It gives me rep-3000 error. Can anyone help on this?
Thanks
null

You might want to check if NLS_LANG and DISPLAY environment variables are set before
you start the designer session.
Mine is set as follows:
NLS_LANG=American_America.WE8ISO8859P1
DISPLAY=my_ip_address:0
Hope this helps.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by dron:
Hi,
I am trying to start reports2.5 in UNIX and I am using r25desm to start the report. It gives me rep-3000 error. Can anyone help on this?
Thanks<HR></BLOCKQUOTE>
null

Error Running Reports (REP-0081 & REP-0124)

Please help.
I am having the following error when running a report on the web:
(from the Reports Queue Manager)
Terminated with Error :
REP-0081: Error during file I/O operation. REP-0124: Unable to
write to the temporary file. scafa 3
thanks for a reply
regards
Yogeeraj

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Reports Error - REP-0110 Rep-1070

Dear All,
When i try to open Report,
REP-0110 Rep-1070
error is showing.
Pl send the solution of open the reports.
Thanks
Regards,
Raghavan

1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA

I am getting report error rep-0736&rep-1247 from concurrent

Hi,
I am running inventory report from concurrent is giving error as rep-0736&rep-1247.That report is giving result in report builder.
Can anybody please tell me.It's urgent.
Thank You,

These two errors are just saying that there is uncompiled PL/SQL in the report:
REP-0736: There exist uncompiled program unit(s)
REP-1247: Report contains uncompiled PL/SQL
When you are running your report in Reports Builder are you using the same database connection as when the report is run from the concurrent manager (ie are you logged on as APPS in Reports Builder)?
If not, I would guess that the user you are connected to in Reports Builder has access to a database object you are referencing in PL/SQL that the APPS user does not have access to or refers to by a different name.
If you are connected as APPS, then I would suggest that you do a full recompile in Reports Builder (Program -> Compile -> All) and see if that identifies any errors.

Error message: rep-4232, rep-4204 while running report

hi
if possible pl. reply me at: [email protected]
i want to email my report by using report6i. i have given following parameters as per
oracle note : 106549.1;
destype: mail
desformat: pdf
desname: [email protected]
i am running this application on window nt .
in my system i am able to send emails using netscape browser. i am getting rep-4232, rep-4204 while running report when i run my report.
pl. suggest.
bye
navdeep
null

i got one reply:
This bug is fixed in version 6.0.8.12.0
Please go through this bug document REP-4204 / REP-4232 WHEN EMAIL REPORT TO VALID EMAIL ADDRESS NOT IN ADDRESS BOOK for explanation.
but problem is that i have 6.0.8.8.3
how to resolve problem in this version

REP-9: A fatal error occured: in the toolkit.

Ok, so I just installed a fresh install of Forms and Reports 11.1.2.0.0 and applied the most recent patch for it like I've been doing to the other servers in my environments. This one is the only one that gives me errors when I try to run a report. Here's what I'm looking at:
REP-9: A fatal error occured: in the toolkit.
UI-9: This function call is out of context.
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-0009:
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at..
I'd type out the rest but I can't paste in the new forum for some reason... Anyone seen this before?

I think I may have found the problem. The path in my account profile was wrong... I'm going to re-install everything with the correct path and see if that helps.

REP-1437: Run time error in the PL/SQL development environment (DE).

I have a report that has always worked. Now I get the following error
REP-0003: Warning: Unable to open global preference file.
Starting report STCONF6 [Mon Nov 10 21:38:59 2008] ...
REP-1437: Run time error in the PL/SQL development environment (DE).
PDE-PSD001 Could not resolve reference to <Unknown Program Unit> while loading <Unknown> <Unknown>.
End report STCONF6 [Mon Nov 10 21:39:10 2008].
What is it? I DON'T know.
Regards SILVIA

I recall my report from a form, I get the parameter form with my parameters, then click on the traffic light to run and the error appears here
Silvia

Concurrent req failed with Rep-0069,Rep-57054

Hi All,
Please suggest on this error.
I have submitted active user concurrent req.
Failed with the below error
REP-0069: Internal error
REP-57054: In-process job terminated:Finished successfully but output is voided
Ny clues on this.
Regards,
Nag.

Please post the details of the application release, database version and OS.
Was this working before? If yes, any changes have been done recently?
What is the type of this concurrent program? Is it Text (which is by default) or it was changed to something else?
Can you reproduce the issue with other concurrent programs?
Please see if these docs help.
All Concurrent Reports Are Failing With Error REP-0004,REP-0082 and REP-0104 [ID 844976.1]
Intermittent Oracle Reports REP-0069: REP-57054: Error [ID 1237834.1]
After Upgarde to R 12.1.2 Running Any PDF Reports: Get: REP-3000,REP-0069 and REP-57054 [ID 1204553.1]
REP-1924, REP-0069, REP-57054, REP-1924 - Errors When Generate Reprts By PDF Style [ID 1053091.1
Reports Fail With REP-0004 REP-3000 REP-0069 REP-57054 On a Cloned R12 (12.0.4) Instance [ID 742122.1]
Reports Cache Directory in Oracle E-Business R12 is Growing Rapidly [ID 859255.1]
Thanks,
Hussein

REP-1070/REP-1051

Hi,
I have a javascript that works independently and when I put that inside ora-rep, I get this error:
REP-1051 unable to save report
REP-1070 Error while opening or saving a document. non-specific error occurred.
help!
thanks!

Hi,
thanks, I'm using rpt6i, oracle 8.1.7.2. still can't figure out why it doesnt work =(, but I since that still restricts my validations, I've trying to write an html/javascript page that will call my oracle report. I've used an oracle pl/sql package where in it I'm calling my oracle report:
<form name="UndelvrdShipForm" onSubmit="return show_alert(this)" method=post
action="http://xxx.xxx.com/dev60cgi/rwcgi60?xuserid&xpwd=/web/app/ors/orsd/opt/reports/xyz.rdf&desformat=html">
but I'm getting this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
but if I ran the http://... separately it works fine, any ideas?
THANKS!

Custom reports do not run with error message: Routine FDPREP cannot read ..

Hi
Can anybody help me with this issue pls?
The dev system is cloned from production a few days ago. After running the post clone procedure, the dev is working fine except when we are trying to run custom reports, it errorred out with error message - Routine FDPREP cannot read the file /fmis/11.5.0/reports/US/POXPRPO1.rep. I have checked the env files, and they seem ok. $CUSTOM_TOP is set to the correct value. Other standard Oracle reports are running properly. The custom report file extension is in low case (.rdf). I've even tried to compile the report manually by using rwcon60.sh, the rep file was created under that folder but concurrent manager is still giving the same error message. So I am suspecting whther it is the path issue, as from the error message we can see up there, it is not showing the absolute path. Can anyone pls shed some lights on this for me?
Thanks!
Liang

Hi hsawwan,
Echo $FMIS_TOP(Custom Top) returns /global/app/fdev/home/fdevapp/findevappl/fmis/11.5.0, which is the correct path.
Interesting thing is I checked the custom forms and they are working properly , our current configuration is form server and web server are sitting on one node, and CM, admin and database are sitting on the other node. So it seems it is the CM node settings caused the problem. However, I've just compared the APPSORA.env, customfindev_XXXXXX.env $FMIS_TOP (Custom Top) on the two nodes, and nothing seems out of ordinary.
Thanks,
Liang

Reports: REP-0177 & REP-3000 errors :-( (RH 6.2.2 HA 1.0)

Similar Messages

Maybe you are looking for