Reports running slow with attributes
Im building financial reports against a small Planning app but there are twenty attribute dims attached to one of my custom dims (employee). I can retrieve within the Essbase addin fine but reports are crashing or taking a long time. I believe the memory values have been max to 1024. Anybody have any suggestions as to what else I can do for the reports performance? EPM 11.1.1.3
Thx
Hi,
For the query in BEx we can see the changes done to query but what are the changes made by another user. That i need to know for this query.
I think some changes might be done by another user.
Kindly suggest me.
Thanks..
Similar Messages
-
Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.
If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins. -
Mac running slow with Yosemite
Mac Running slow with Yosemite install.
report is below. Now what do I do? Thanks Stu
Problem description:
Mac running very slow after Yosemite install. Wheel turns almost all the time
EtreCheck version: 2.0.11 (98)
Report generated November 7, 2014 at 10:14:41 AM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 14:53:8
Disk Information: ℹ️
Hitachi HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (343.70 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.coreservices.uiagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.SafariNotificationAgent.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.syncdefaultsd.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.cache_delete.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.smbd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.sonos.smbbump.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 155.18 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 3.00 TB
Total number of backups: 106
Oldest backup: 2012-07-30 21:42:20 +0000
Last backup: 2014-11-07 07:42:37 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
12% mds
6% WindowServer
0% Dropbox
0% AppleSpell
0% fontd
Top Processes by Memory: ℹ️
90 MB Safari
34 MB WindowServer
26 MB mds
26 MB cloudd
21 MB soagent
Virtual Memory Information: ℹ️
64 MB Free RAM
766 MB Active RAM
721 MB Inactive RAM
1.13 GB Wired RAM
18.26 GB Page-ins
120 MB Page-outsmy mac is also running very slowly with that spinning beach ball constantly making its unwanted presence felt. i've tried the following so far:
- safe boot
- cleared items from Users / Groups | Login
- checked Activity Monitor to remove any processes in red
- run disk verify
- reinstalled the OS X
here is the output from my EtreCheck ...
Problem description:
mac running very slowly with yosemite
EtreCheck version: 2.1.8 (121)
Report generated 8 March 2015 1:41:06 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Late 2012) (Technical Specifications)
iMac - model: iMac13,2
1 2.9 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GTX 660M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:8:1
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (737.74 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apogee Duet USB
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. MacBook Air SuperDrive
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/AirParrot.app
[not loaded] com.squirrels.airparrot.framebuffer (3 - SDK 10.7) [Click for support]
[not loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) [Click for support]
/Library/Extensions
[not loaded] com.apogeedigital.kext.ApogeeUSBDuetAudio (1.0.0a1 - SDK 10.9) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
[not loaded] com.pctools.iantivirus.kfs (1.0.1) [Click for support]
Launch Agents: ℹ️
[running] com.ApogeePopup.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.DuetUSBDaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.facebook.videochat.[redacted].plist [Click for support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
"Duplicate Tab" Button
Exposer
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 261.60 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 53
Oldest backup: 2014-05-24 09:36:55 +0000
Last backup: 2015-03-07 02:24:42 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 261.60 GB X 3)
Top Processes by CPU: ℹ️
9% cloudd
2% WindowServer
0% backupd
0% cloudpaird
Top Processes by Memory: ℹ️
258 MB Living Earth Desktop
180 MB cloudd
86 MB Finder
69 MB ocspd
52 MB Preview
Virtual Memory Information: ℹ️
16 MB Free RAM
1.67 GB Active RAM
6.19 GB Inactive RAM
710 MB Wired RAM
77.72 GB Page-ins
7 MB Page-outs
Diagnostics Information: ℹ️
Mar 8, 2015, 01:25:39 PM Self test - passed
Mar 7, 2015, 03:24:57 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Pages_2015-03-07-152457_[redac ted].crash
Mar 5, 2015, 10:20:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-05-222058_[reda cted].crash
Mar 5, 2015, 10:14:51 PM /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-05-221451_[reda cted].crash
Mar 5, 2015, 10:14:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-05-221442_[reda cted].crash -
My Macbook Air is running slow with Yosemite.
My Macbook Air is running slow with Yosemite.
I checked out most of the blogs and everything and have removed widgets from the notification center, but everything seems to run kinda slowly.
Sure, i have the base model 2014 macbook air but that 4 gb ram should run a freakin finder just fine. I had Mavericks installed before, and with that, i could do everything. I even made cool music in GarageBand and nothing was lagging for me. Now i installed Yosemite... Everything is lagging. Scrolling seems like it happens around 10 FPS. That aint good man. Memory cleaner says around 1gb ram free when only the finder is running in the background (before it did around 2). I just uninstalled Memory Cleaner o I'm not looking at that little amount of memory. I don't know what to do now? I would appreciate it, if someone would help me. Otherwise, ill just wait for a new update.Since it's new I would take it back for repair or exchange under your warranty before bothering to read further.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Hi Gurus,
We are using Report 10g on 10g Application server and solaris. we created a report on a table which has 10,000 rows. The report has 25 columns. when we run this query in Toad it took 12 sec for fetching all these 10,000 rows
But when we run the report with Destype = 'FILE' and Desformat = 'DELIMITEDDDATA', it is taking 5 to 8 minutes
to open in excel ( we concatenated mimetype=vnd-msexcel at the end of the url if the Destype=FILE). We removed the layout in the report as it is taking 10 to 15 mins to run to Screen with Desformat=HTML/PDF(formating pages taking more time). We are wondering why DELIMITEDDATA format is taking long time as it runs only query.
Does RWSERVLET take more time of writing the data to the Physical file in the cache dir? Our cache size is 1 GB. we have 2 report servers clustered. Tracing is off.
Please advise me if there are any report server settings to boost the performance.
Thanks alot,
Ram.Duplicate of Strange problem... Query runs faster, but report runs slow... in the Reports forum.
[Thread closed] -
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?
yankeecat wrote:
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book.
There is no such Trojan or other malware known today that will do that using OS X nor has there ever been one. The most probable explanation is that somebody hacked into your e-mail account on the server, so you should change that password to something stronger right away. If it had come from your Mac then there would almost certainly be copies of those messages in your Sent Mail mailbox. -
HT4623 iphone4 runs slow with ios7
Why does my iphone 4 run slow with ios 7.04 and can I get ios 6 back?
you cannot. there is no way to downgrade the ios. you might just have a buggy version of the software. i, personally would do a restore. i and to do that with my 4s
-
Did macbook air mid 2009 running slow with mountain lion?
did macbook air mid 2009 running slow with mountain lion?
Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook). -
my macpro runs slow with or without internet on..... How can I find out if something is running in the background?
Please boot in safe mode and test. Still slow? If you connect to a wireless network, you may have to connect with Ethernet in safe mode.
After testing, reboot as usual (not in safe mode.)
Mac OS X: Starting up in Safe Mode -
My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
SSRS reports running slow while fetching data from SQL server DB
We are currently facing issues with lots of our SSRS reports running very slow. Approx they are taking around 15-20 minutes compared to earlier which was 2-3 minutes.
Also, the SSRS reports which fetch their data from a Database is acting as Subscriber for a reporting server. That is we have an OLTP DB server whose Database say 'A' is getting replicated onto the server where say Database 'B'. On this B we have our SSRS
reports fetching the required data and are reported to be running very slow.
As a start I have checked for Index and stats to be properly updated and yes they are.
I am not sure now, from where to start analysing the issue.
I believe replication, not to be the issue as earlier also we had replication set up and never saw the slowness.
IS memory or IO causing a problem, please help as i am not sure on how to find a fix for this?
Thanks in advance!Hi,
You need to first find out what all are slow? Is it that the whole instance is slow? How about other queries /replication etc against those databases? Are they slow?
Check the reports which are slow, try to find the slowest reports and then start looking at execution plans. Check if there is any kind of blocking happening during the time the reports run. Also try running the reports manually and see if there is a difference
in execution time. Take a look at the waitstats during the time the reports are running.
Read this to get more better understanding -
https://technet.microsoft.com/en-us/library/ms177500%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Oracle 10g Reports running slow
On one server we have an issue with some reports of 2pages taking 2 minutes or more to run, but on another server with the same data transferred across the same report runs in about 3-5 seconds.
The reports we are having issues with contain graphs.
The server spec is better on the slower running report server than the other report server.
How can I fix this?Hi,
did you any exceptions you in the logs of report server??
Location:
$ORACLE_HOME/reports/logs/ <report_server> / .
Remove a trace,when your executing the graphical report.
It would help you to finding why the report is taking so much time
please follow the below link for tracing the reports in OAS 10g
http://docs.oracle.com/cd/B2501608/doc/dl/bi/B14048_02/B14048_02.pdf_
Regards
Fabian -
Hi All,
I am struggling with this issue that reports are running slow & it is taking few minutes to execute.
In BEx Analyzer it is running slow.
Please tell me reason why this can happen & possible solution.
Thanks.Hi,
For the query in BEx we can see the changes done to query but what are the changes made by another user. That i need to know for this query.
I think some changes might be done by another user.
Kindly suggest me.
Thanks.. -
Financial Reporting batch reports run slow at random
FR reports version: 11.1.2.1
This is a summary of our environment:
-Linux server where Hyperion batch reports run
-Linux (SLES-11) server where Essbase resides
-Windows 2008 server where Hyperion Print Service and GhostScript reside
This is what we observed this morning:
Batch reports are executed serially by a master shell script.
One of these reports takes 30+ minutes to complete. The exact same report usually completes in less than 3 minutes.
This problem occurs 3 to 5 times each morning, and not necessarily on the same report.
While the report shows ‘Running’ in the Hyperion Batch Scheduler, there is no process present on reports server. There is no active session on Essbase. There is no active print process on the print server.
Eventually, the report completes successfully and the pdf file is present on reports server.
We haven’t been able to determine where the process is during the period that it appears to be stuck. The best we can do is to look at the status on the Batch Scheduler. It is not a practical option for us to schedule everything using the Batch Scheduler on a daily basis.(this is what Oracle is suggesting, by the way).
Has anybody experienced similar FR batch reports slowness?
Thanks.IT parsed the HTML into csv so that another program could compare a Trial Balance from HFM with a Trial Balance from the source GL system to ensure all data got imported to HFM.
-
Hi,
We have reports build on one multicube and its is running very slow ..after entering selction paarameters it keeps running for long time even when i am running for one cal year/month but earlier it was running fine
we have compressed req of cubes which are in this MP
and moreover we have other reports also based on same MP they are running ok only problem with 1 report
can anyone pls tell what to check for ?also i tried executing in web same report there also it took lot of time
any quick helpa pprecaited
thanks
nileshI faced a similar issue once. Upon investigating the execution plan, i found that the query was reading 0VENDOR Text multiple times because we had 4 or 5 different vendor partners displaying text. We moved those vendor partners into free characteristics and asked the users to drill down by those partners as needed instead of having it in the initial report view.
We also had an issue with reading UOM conversion tables and currency conversion tables at query run time. One query which did not use those conversion tables ran fine but one query which used those conversion tables on the same info provider was running real slow. We then moved the calculation in the transformations and then the report ran much faster.
These are couple of things i have noticed on my reports that were running slow.
You can run RSRT in debug mode. Select Query execution plan and Query Statistics. Both of these will give you wonderful insights into what really is happening when the query is executed.
The query statistics will tell you how many fact table records were actually read. The Query execution plan will tell you each table that is being accessed by your query.
Good Luck.
MP.
Maybe you are looking for
-
Warning sign in display window
I have a 20 gb 4th gen ipod, Today it has just stopped working. When you turn it on you first get the apple logo and then a picture of an ipod with a sad face on it with a warning triangle with an exclamation mark in the middle of it and the apple we
-
Copying selection criteria in XLR advance report builder
Can anyone tell me if it is possible to copy columns, rows or cells in the XL Reporter advance designer and copy the selection criteria as well? Thanks
-
Hi Experts, I've done the steps in Integrating BI and Portals. I've come across an issue where i initially setup a system as the BI mastersystem and then deleted the system and reassigned it to another system. I have alias SAP_BW on this new system a
-
I have found a very annoying problem on my N70. If you receive a text from someone not in your phonebook - and you then add the senders number into your contacts - their name is still not displayed in list of messages in the inbox, just their number.
-
Two finger scroll not working in Microsoft Word for Mac
Just finished installing Yosemite today and haven't had any real issues...however, I've noticed that two-finger scrolling doesn't work in Microsoft Word for mac. It works fine in many other applications (including other Microsoft apps--Excel & PowerP