Reports Server 6. installation problem on NT
Hi,
I am trying to install Dev2k Reports server on NT4, SP3. I created the Report server service, configured it to start up service as my user account.
The starting up of the service fails. In the ORAHOME/Rerpot60/server/*.log file I keep getting the 'Daemon failed to listen to port.' error message. I simply have not got a clue, what may be the problem.
Any help will be highly appreciated.
Tamas Szecsy
[email protected] or [email protected]
null
hi Akshay!
Is there something in this log that looks fishy?
i'm not a software engineer (kind of an installation nurse/paramedic), so i can't help you there. did you email the log to Gayle?
love, b
Similar Messages
-
Crystal Reports Server 2008 Installation Error
Good day,
My name is Dominic Hung and I work at Business Objects. One of my clients is coming across an installation error on their evaluation of CRS 2008 and is detailed as follows:
They currently have the actual report writer (Crystal Reports 2008) on a desktop PC. It's not installed on the server.
We have the MySQL ODBC loaded on the local desktop as well as the server that is hosting CR2008 Server.
The credentials (userid/password) used in both the desktop and server's ODBC configuration is READ ONLY.
During the installation wizard for CR2008 Server, I key in the userid & password that I use when we create reports, but I receive an error stating that
CMS database error: STU000226
BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "esc:10.127.214.22:3306". Reason: Database access error. Reason access denied for user 'jdcherry'@'% to database 'esc'
This is where everything stops and they can't go further. They are not sure why they are receiving the "access denied" error as shown above. They have no problem connecting to the MySQL database when they create a report using CR2008, the CR2008 SERVER won't accept my credentials during the installation.
QUESTIONS:
The "jdcherry" UserID (which I use) is READ ONLY on the MySQL database that's hosted on the Linux box. Does the userID have to have higher priviledges than just READ ONLY in order to validate the database credentials?
If so, what level of access is required?
Does the installation of CR Server update any of the tables that are stored on the MySQL database?
Do we need to install the Crystal Reports 2008 on the server in order for Crystal Reports 2008 SERVER to work?
What other workarounds can be done for the client? The windows server they have Crystal Reports Server 2008 installed on has web services enabled but are continuing to come across issues. Any insight for the client would be greatly appreciated.Does the userID have to have higher priviledges than just READ ONLY in order to validate the database credentials?
The userID used when installing CRS must have dba previleges (create/drop tables) on the schema.
Does the installation of CR Server update any of the tables that are stored on the MySQL database?
You should create a new schema/DSN for the CMS db. The installation of CRS creates 8 new tables.
Do we need to install the Crystal Reports 2008 on the server in order for Crystal Reports 2008 SERVER to work?
No
All this information is in the BOE XI3.0 Installation Guide. -
Hi everyone,
I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
has window 7 OS , 80 GB freen HD and 6 GB RAM. ) Therefore I download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
But during installation of SQL server I have problem ...it says
the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
The database engine also not installed displaying same error.
I don't know how can i install sql server 2012 to use with visual studio in same computer.
Can somebody please help with SQL installation please ?
It will be great help.
Many thanks in advance
regards
rashHi
my summary file is :
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146232832
Start time: 2015-04-06 11:34:18
End time: 2015-04-06 19:04:46
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for IS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for AS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: RASHA-VAIO
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.1.2531.0 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: RASHA-VAIO\RASHA
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: MAIN
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: RASHA-VAIO\RASHA
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RASHA-VAIO\RASHA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Integration Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Client
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Analysis Services
Component error code: 0x80131600
Error description: The service could not be started. Reason: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
thank you -
Crystal Reports Server XI Installation
We just purchased Crystal Reports Server XI for Crystal Reports Professional and I want to install it minimally as I think we may have "overbought"; that aside, the big question is where do I go from here to put this on our servers w/o impacting current applications?
TOPOLOGY:
- we have a Windows network with Windows 2003 Small Biz Server and a 2nd server with Windows 2003 Standard running Terminal Services.
- goal is to allow 1 main user to create reports from Quickbooks using Crystal Reports while they are on the Terminal Server
This breaks down into the following questions:
1) do I need to install the server portion at all? or can I just install Crystal Reports Pro via the CLIENT installation on the terminal server?
2) if I do have to, I'd rather use MSDE already installed but how should this be set up?
3) what impact will this make on the SBS web server which we are already using for OWA and Remote Web Workplace?
Any tech docs/manuals that you could link me to would be appreciated as well.
Thanks,
DougWe just purchased Crystal Reports Server XI for Crystal Reports Professional and I want to install it minimally as I think we may have "overbought"; that aside, the big question is where do I go from here to put this on our servers w/o impacting current applications?
TOPOLOGY:
we have a Windows network with Windows 2003 Small Biz Server and a 2nd server with Windows 2003 Standard running Terminal Services.
goal is to allow 1 main user to create reports from Quickbooks using Crystal Reports while they are on the Terminal Server
This breaks down into the following questions:
1) do I need to install the server portion at all? or can I just install Crystal Reports Pro via the CLIENT installation on the terminal server?
2) if I do have to, I'd rather use MSDE already installed but how should this be set up?
3) what impact will this make on the SBS web server which we are already using for OWA and Remote Web Workplace?
Any tech docs/manuals that you could link me to would be appreciated as well.
Thanks,
Doug
Hi Doug,
With regards to your questions, they will be answered in the following ways:
1) do I need to install the server portion at all? or can I just install Crystal Reports Pro via the CLIENT installation on the terminal server?
This questions is better by your company's requirements. The Crystal Reports Server (CRS) piece is used by end-users who want to browse reports via the web. The CRS is just a central repository, analogous to a central storage box, which makes reports available over the web. Crystal Reports (CR) is simply the client that is used to report off your database. In this case, your 'database' is Quickbooks.
So in short, you will need to install Crystal Reports Pro for your user to make reports. And if the user needs to view report over the web, then you will need CRS as well. The user will create the report and save it to the CRS if he/she wants to view it over the web.
2) if I do have to, I'd rather use MSDE already installed but how should this be set up?
The question may need further clarification.
However, if you are using MSDE to write reports with (for CR), then you can use an ODBC connection to connect it. You can consult this external page as a guide: http://www.truthsolutions.com/sql/odbc/creating_a_new_odbc_dsn.htm. You will set the connection to your MSDE.
If you are asking about how to configure MSDE to be used as the CMS (Central Management Server) database for the CRS, then you will to consult our "BusinessObjects Enterprise Administration" forum. As a note, the CMS is just a backend security database that authenticate user(s) that sign into the CRS.
Your post is posted in the "Crystal Reports" forum.
3) what impact will this make on the SBS web server which we are already using for OWA and Remote Web Workplace?
If you are asking how CR would impact your web server, it should not have any effect. If you are inquiring about how CRS would affect them, you will also need to consult our "BusinessObjects Enterprise Administration" forum. -
Crystal Reports Server XI License problem
Post Author: Seb
CA Forum: Upgrading and Licensing
Hi all,
I've been trying to install and run the crytal reports server and have had a number of problems. I got around the dreaded cms server can't start issue by deleting and reinstating the databases.
now I have this when trying to login to Infoview
Unable to retrieve system information. Please ensure that the system has a valid license key.
I've been on and registered and try and enter the new license key into the CMC but then get this error
"There was an error while writing data back to the server: Unable to load keycode.dll"
I'm guessing it's probably some sort of permissions/registry issue but don't know where to look next.
Cheers
SebThanks for the information.
Actually we do not find "Central Management Console" in Start/Programme/Crystal Reports Server 2008/Crystal Reports Server 2008/.
We also tried using the http://webserver:8080/CmcApp/ by providing the correct hostname and also with the IP address; but we get a webpage not found error.
Could you please help us. We are not able to find Central Management Console.
Thanks is advance!!!! -
Crystal Report Server 9 - licenses problem
I am using ASP with Crystal Report Server 9 in an inhouse web application which provides many online reportings.
Here is my problem : when the number of concurrent reporting request increases, the RAS could not respond. Check from IIS log and found the following error :
[ 2010-08-05 09:52:11 W3SVC1 168.83.0.31 POST /leasing_activities/gen_approval_form.asp |350|80041018|The_maximum_number_of_concurrent_licenses_has_been_exceeded. 80 - 168.81.101.21 500 0 0 ]
The RAS would then keep in a very high utilization and what I have to do is to either restart the RAS service or the RAS server in order to get it operating again.
Sometimes it affects the IIS (my guess) as users' front end program would also hang up. Note that my IIS and RAS resides in different servers.
Questions
Is the problem ( high utilization and non-responsive ) caused by the licenses ?
Whether I need to purchase additional user licenses for the RAS or anything I could do to fix the problem ?
If the projected number of users is about 150, do I need to buy each user a licence ( total 150 lcenses ) ? Is there any server license that could support such population of users ?
Many thanks in advance.Is the problem ( high utilization and non-responsive ) caused by the licenses ?
It is probably a combination of running out of licenses and overwhelming the RAS Server.
Whether I need to purchase additional user licenses for the RAS or anything I could do to fix the problem ?
RAS 9 has been out of support for years now and licenses can no longer be purchased as far as I know.
If the projected number of users is about 150, do I need to buy each user a licence ( total 150 lcenses ) ? Is there any server license that could support such population of users ?
You will have to talk to sales to see about moving to a newer supported platform for that number of users.
Jason -
Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint
Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav KothariHi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen -
Automatic SQL Report Server extension installation
Hi,
I would like to know if there is a good way to automatically install an extension like a delivery extension on a report server.
The reason why I need this is simple: We have integrated the report server into our solution and we want to install our extension alongside our solution. The DLL and its registration is not an issue but adding everything to the configuration files is.
Is there a prepared solution for this or do we have to care about this ourselves?Hi guw,
According to your description, you want to Implement custom Extension in SQL Server Reporting Services, you have integrated the report server into the solution and want to know how to modify the configure file to use new extension.
To use custom extension in SQL Server Reporting Services, please refer to the following steps:
Compile custom code extension.
Copy the Custom extension files to the "PrivateAssemblies" folder.
To use reference in the report, we need to grant the permission for assembly by following steps:
• Go to C:\Program Files (x86)\Microsoft Visual Studio10.0\Common7\IDE\PrivateAssemblies \RSpreviewPolicy.config.
• Give “FullTrust” for Report_Expressions_Default_Permissions.
• C:\Program Files\Microsoft SQL Server\MSSQL\Reporting Services\ReportServer\rssrvpolicy.config
• Give “FullTrust” for Report_Expressions_Default_Permissions.
Modify rsreportserver.config(default location: C:\Program Files\Microsoft SQL Server\ServerInstance\Reporting Services) to accept the new extension.
For detail information, please refer to the following documents:
https://julientheys.wordpress.com/coding/ssrs-custom-delivery-extension/
http://www.codeproject.com/Articles/22946/Implementing-a-Data-Processing-Extension
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Solaris 8 on Intel STL2 server board - installation problem
Hi,
I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
Booting kernel/unix...
SunOS Release 5.8 Version...
then reboots after 2 seconds.
Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
Finally, I found the very strange specification update info of STL2 board, published by Intel:
"13. Sun* Solaris* 8 installation issues
PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
I would appreciate any help. Thanks.
MattThe problem has been resolved.
I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
Matt -
SQL Server 2014 Installation Problem
I run the setup file and hit the New Standalone Installation Of SQL Server.
When i enter the license key and accept the terms of use and pass the Product Updates and Install Setup Files, i see a warning on Microsoft.NET Security ... but i know that's nothing ... i go to Installation Type and choose new installation ...
I choose all features installation and in features selection i choose whole features. and i set the installation directory the default ...I choose default instant in Instant Configuration ... In the Server Configuration i only change SQL server browser i change
it from disabled to automatic . in the Database Engine Configuration I do nothing and i go to Analysis Services Configuration i add current user to Administration permissions for analysis services ... i hit next and go to Reporting Service Configuration and
hit the Install & Configure radio button and hit next ... i add current user again ... in the Distributed Reply Client i pass the controller name & Hit next ... When i hit Install and when installation completes ... i see the an error ... Some of the
features didn't installed successfully and another warning about The specified service has been marked for deletion.
(This warning occurred when i deleted the database engine file from the previous installation folder that the new SQL is going to install in it .)
Reporting Services , Database Engine Services ,
SQL Server Replication , Quality Services and Full-Text and Semantic Extractions for Search features are
not able to install ... why ?
My Operating system is Win 7 SP1 and i have Visual Studio 2013 on my PC.
CPU : Intel Pentium Dual CoreCan you please post output of summary file it would be located at.
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log
You can use
This Link to Locate Log files
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Content Server 10gR3 installation problem on Windows 7
Hi,
I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
Thank you
RamaHi Srinath,
Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
Thanks again
Rama -
Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2
Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
LogA few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running. -
Report Server Performance related problem
Hi all,
We have a report which generates the output in PDF format. Our Report generates report of 2134 pages with some particular parameters.
If a user runs a 2134 long page report over the Web, is there a way to look at some of the pages rather than send all 2134 back to the browser? The output
should be in pdf format only. I have seen the parameter PAGESTREAM=TRUE, which works only with HTMLCSS,HTML output format only. Is there any work around for the pdf?
Thanks in advance..
regards,
srinivas.MI can't access my server now but i have searched httpd.conf file under all my oracle directory
and i only changed the one under apache folder
the_machine_name with ip
I didn't ping myservername but it only helped me to change the url under submit query button.
It was directed to http://<machine_name>/reports/rwservlet? ...
after this
it is directed to to http://<machine_IP>/reports/rwservlet? ... -
SAP Crystal Server 2011 installation problems on VM Ware
Hello,
I have download Crystal Server 2011 and I want to install on an VM Ware with:
- Windows Server 2008 R2 64Bit
- I am the administrator
- 2 Core
- 6 GB RAM
- MS Visualk C++ 2005 and 2008 is installed
The VM-Ware ist started with Version 4.0.2 Player
I Start the setup an then come the error:
Micrsosoft Visual C++ Run time Libary
Runtime Error
This apllication has request the runtime to terminate it in an unusual way.
Please contact ...
Can anybody help me. I need this testinstallation on Monday..its very urgent.
Many than ks for your helpHello,
many thanks for your help. I have uninstalled 2005 and 2008. After that I started the Installation of Server 2011. But its the same misstake
Other suggestion?
Tobias -
Portal Server 7 installation problem?
Firstly I have installed JES 2005Q4, after that I want to upgrade portal server 6 to the portal server 7. and when I try it, it gave these errors. What I have to do?
1. Install
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}?
Java Enterprise System
|-1%--------------25%---java.io.IOException: java.io.IOException: /opt/sun/portal/bin/psconfig: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:464)
at com.sun.orion.installer.common.config.OrionConfigurator.executeCmdWithArgs(Unknown Source)
at com.sun.orion.installer.portalserv.config.PortalServerConfigurator.unconfigure(Unknown Source)
at com.sun.orion.installer.common.config.OrionConfigurator.performUnconfiguration(Unknown Source)
at com.sun.orion.installer.common.config.ConfigLeaf.uninstall(Unknown Source)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1637)
at com.sun.install.products.InstallNode.finishUninstall(InstallNode.java:1270)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1642)
at com.sun.install.products.InstallNode.finishUninstall(InstallNode.java:1270)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1642)
at com.sun.install.products.Product.performUninstallation(Product.java:223)
at com.sun.install.products.InstallNode.CheckCancelledAndWriteToLog(InstallNode.java:965)
at com.sun.install.products.InstallNode.startInstall(InstallNode.java:1090)
at com.sun.install.products.InstallComponent.performInstallation(InstallComponent.java:1457)
at com.sun.install.products.Product.performInstallation(Product.java:651)
at com.sun.install.tasks.ProductTask.perform(ProductTask.java:153)
at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
at java.lang.Thread.run(Thread.java:595)
Error in executing command : /opt/sun/portal/bin/psconfig unconfig /tmp/psunconfig_devserver.efes-yazilim.com_114287575411016186.xml ------------50%-----------------75%--------------100%|
Installation Failed
No software was installed.
You can view the installation summary and log by using the choices below.
Summary and log files are available in /var/sadm/install/logs/.
You can refer to the Troubleshooting chapter of the Java Enterprise System
Installation Guide to resolve the installation issues.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 2
Installation Log
Installing Java Enterprise System
Log file: /var/opt/sun/install/logs/Java_Enterprise_System_install.
B03201923
Installed: /var/sadm/prod/sun-ps7_0-
entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class
Uninstaller is at: /var/sadm/prod/sun-ps7_0-
entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class
OrionUninstallersun-ps7_0-entsys
Installing RPM: sun-ps7_0-entsys
RPM sun-ps7_0-entsys successfully installed.
Installing RPM: sun-ps7_0-entsys-l10n
RPM sun-ps7_0-entsys-l10n successfully installed.
Mobile Access Component
Skipping component sun-mobileaccess because it is already installed.
Skipping component sun-mobileaccess-config because it is already installed.
Portal Server Administrator
Installing RPM: sun-portal-admin
file /opt/sun/portal/lib/config.jar from install of sun-portal-admin-7.0-1
conflicts with file from package sun-portal-configurator-6.3-25.12.2
file /opt/sun/portal/lib/PSversion.properties from install of sun-portal-admin-
7.0-1 conflicts with file from package sun-portal-core-6.3-25.12.2
file /opt/sun/portal/lib/jdom.jar from install of sun-portal-admin-7.0-1
conflicts with file from package sun-portal-portlet-6.3-25.12.2
Error: RPM sun-portal-admin install failed}.
Install complete. Package: sun-portal-admin
<--[64%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
rpm: Skipping rpm remove of sun-portal-admin, not installed.
rpm: Skipping rpm remove of sun-portal-search, not installed.
rpm: Skipping rpm remove of sun-portal-portlets, not installed.
rpm: Skipping rpm remove of sun-portal-base, not installed.
rpm: Skipping rpm remove of sun-portal-admin, not installed.
Installing RPM: sun-mobileaccess-config
RPM sun-mobileaccess-config successfully installed.
Installing RPM: sun-mobileaccess
RPM sun-mobileaccess successfully installed.
rpm: Skipping rpm remove of sun-mobileaccess-config, not installed.
rpm: Skipping rpm remove of sun-mobileaccess, not installed.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits}After a successful install the Directory, AM servers are down. You will have to start them after the install.
Stop start the process below in the order:
Stop/Start Directory Server instance:
Stop/Start Webcontainer instance running AM Server and Portal Server
Restart Cacao /opt/SUNWcacao/bin/cacaoadm restart
If the above does not fix it, take a look at the /var/opt/SUNWportal/portals/portal1/logs/<portal-instance>/*.logs
and the webcontainer logs for more details
Maybe you are looking for
-
Varience calculation for period 03 / 2008
dear All , I am carrying out KKS1 FOR FISCAL PERIOD 03 / 2008 so the system should consider only the orders having TECO or PDLV / DLV status for the same. Why the system is considering Orders having status CLSD and showing errors that" ord status CLS
-
Video changes when moving project over to CC (2014.2)
I have just moved across a project from Premiere Pro CC to Premiere Pro CC (2014.2). A notice popped up to say that the file had to be converted, after doing so, alot of the footage and sub clips are not actually what i have edited, it is from differ
-
ok so on my online account You can go back and see all calls and text for the past year. I want that deleted or taken off my account. How can this be done? Mainly the text messaging part I want taken off
-
Unable to 'Sign In' to Facebook App
I am unable to sign into the Facebook app for my Palm Pre. I have NEVER been able since first downloading it... and I would really like to try it instead of having to go to the web. When I input my login information (which I'm sure it works because I
-
IMac 27" -Photoshop CS3/CS4 redraw issues- anyone else?
Hello Forum, I am a pro photographer. I do have the new 27", 3.06Gh, with 10.6.2.1 When I start up CS3 or CS4, open a picture at 100%, and scroll within it, the borders show the "chess" pattern, and I have redraw issues. Any help would be appreciated