Reports Server and Reinstalling Oracle9i Application Server - URGENT!! Please Help

I have been experiencing problems while trying to reinstall ORACLE 9i AS - Unlike the first time I installed it, I was not prompted to enter configuration details for the origin database (host, port etc.) and portal settings!!!! etc. It doesn't even appear to install the products either. (I have uninstalled the previous installation prior to attempting reinstallation.
- If anybody has any ideas please explain in detail what to do.
Thank you in anticipation!!!!!
Charlie
[email protected]

Oh NO! I was too busy answering a post which was SUPER URGENT!!!!!! (It had 6 exclamation points and yours only has 5, plus it said SUPER). MAN, I hope you didn't DIE or something...

Similar Messages

Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.V

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

Oracle8i and Oas 4081 - PLSQL TOOLKIT - Urgent Please help.

Hi ,
I installed Oracle 8i and Oas4081 on different ORACLE_HOME on the Linux 6.1 . When I tried to install the PLSQL toolkit it giving me an Oracle Database error 63744.
But I am enabled the sql_trace and I found OAS is successfully connecting to Oralce8i database, but it failing for some reason.
Do we need to do anything special on Oracle 8i side to install the PLSQL toolkit ..??
.Please help ...
Thanks in advance ..
kkumar

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

SUDDENLY, FIREFOX "WILL NOT OPEN"-(ALWAYS USING XP PRO)-HAVE UNINSTALLED AND REINSTALLED! NOTHING!! PLEASE HELP!!!

It is just as I have said. Nothing like this has ever happened before; 2-1/2 months ago, latest version of Firefox recommended to me by 2nd Level Technician from AT&T U-VERSE; as yoou are well aware, IE-8 may react differently from day to day! AT&T U-Verse said off the record to me that sometimes IE-8 gives them Fits" I do nopt kno0w where to turn; U-Verse Techs only solve specific U-Verse problems! All of this suddenly occurred today;it's bizarre????
George M Olivier
[email protected]
I have almost given up!

I will be using IE9 until this is fixed. Perhaps for good!!

Oracle9i Application Server Release 2

Oracle9i Application Server Release 2, which includes Oracle9iAS
Portal Release 3.1, is planned for the final calendar quarter of
2001.
What are the new features of 9iAS Release 2 and Portal Release
3.1?
Thank you.

The 9iAS R2 was desupported a few years ago and the link for software download has also been removed from the Oracle site.

How to utilise forms installed in Oracle9i Application Server from client

Dear Friends,
I have installed Oracle 9i Application Server and Forms 5.0 Reports 3.0 in the application server. How to make use of application server so that forms installed in it available to end users, the client. What are the steps i need to do. Please explain.

Forms 5 & Reports 3 in Developer 2.1 have been desupported for a number of years now. If you haven't already figured out how to get it working on the web, download the Forms & Reports Services Standalone version of the 10g Application Server. It has Forms & Reports properly configured after the instalaltion. Just look under the Demonstrations tab of the home page and click to run either Forms or Reports on the web. You can customize your setup afterwards for your application. Of course you'll need to upgrade your application.
You can find this download at:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
under "Forms & Reports Services Standalone"
It is a 1 CD download.
Cordially,
Steve

Broken link in "Oracle9i Application Server Portal Error Messages"

Hi,
the following link to "Troubleshooting Issues in Oracle9iAS Portal Architecture and Performance"
http://portalstudio.oracle.com/servlet/page_pageid=478&_dad=ops&_schema=OPSTUDIO&
is bad in the document "Oracle9i Application Server Portal Error Messages" which can be found at http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/ERRORMESSAGESHTML/CH_902.HTM
Rgds
Sol

After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
The log file:
mod_jserv.log
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: can not connect to host 127.0.0.1:8007
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
[24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
Please help me.Any help appreciated!

Oracle9i Application Server Release 2 version

Hi i have Oracle9i Application Server Release 2 on IBM-AIX
I found this:
http://www.oracle.com/technology/documentation/ias.html
How i can check what is my exact version?

ansver is here
http://rnyb2.blogspot.com/2007/06/checking-oracle-application-server.html
Version of Oracle application server

How to handle the error in Oracle9i Application Server?

After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
The log file:
mod_jserv.log
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
[24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
Please help me.Any help appreciated!

After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
The log file:
mod_jserv.log
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: can not connect to host 127.0.0.1:8007
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
[24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
Please help me.Any help appreciated!

How to set the keepalive timeout and nativepoll in application server 8.2

Hi,
I would like to know how to set "keepalive timeout" and "nativepoll" on application server 8.2.
Thanks,

These parameters were set in Application server 7 as per the following documentation:
http://docs.sun.com/source/817-2180-10/pt_chap4.html
However I am not able to find any documentation with regards to application server 8.2
Please advice..
Thanks

Netweaver administration and SAP Web Application Server r the same?

Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
Malti

Hi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh

Auditing in oracle 10g database and oracle 10g application server

Dear friends,
We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
Can you please tell me how can i do it.
Thanks & regards,

Its the database connection you want to track. The session audit will show where it came from.
Auditing is turned using this command:
alter system set audit_trail = DB scope=spfile;
Note: The use of spfile will require a DB bounce before audit starts
To audit Sessions:
audit create session;
Query by Audit Type:
SELECT A.USERNAME,
OS_USERNAME,
A.TIMESTAMP,
A.RETURNCODE,
TERMINAL,
USERHOST
FROM DBA_AUDIT_SESSION A
WHERE USERHOST = <replace with iAS servername> ;
By User
SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
Check for users sharing database accounts
select count(distinct(terminal)),username
from dba_audit_session
having count(distinct(terminal))>1
group by username;
Attempts to access the database at unusual hours
SELECT username, terminal, action_name, returncode,
TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
TO_DATE ('08:00:00', 'HH24:MI:SS')
OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
TO_DATE ('19:30:00', 'HH24:MI:SS');
Attempts to access the database with non-existent users
SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE returncode <> 0
AND NOT EXISTS (SELECT 'x'
FROM dba_users
WHERE dba_users.username = dba_audit_session.username);
Other audits you might consider:
audit grant any object privilege;
audit alter user;
audit create user;
audit drop user;
audit drop tablespace;
audit grant any role;
audit grant any privilege;
audit alter system;
audit alter session;
audit delete on AUD$ by access;
audit insert on AUD$ by access;
audit update on AUD$ by access;
audit delete table;
audit create tablespace;
audit alter database;
audit create role;
audit create table;
audit alter any procedure;
audit create view;
audit drop any procedure;
audit drop profile;
audit alter profile;
audit alter any table;
audit create public database link;
Best Regards
mseberg

FM to get list of all directories and files on application server..

Hi All,
Can anyone tel me FM to get list of all directories and files on application server..i know 'F4_DXFILENAME_TOPRECURSION'
and '/SAPDMC/LSM_F4_SERVER_FILE' these are working too...but my requirement is when i click F4 i should get list of directories and whn i select one of these the only directory name should display.....and whn click again for 2nd text box field i want file name ...means directory name in one text box field and file name in another....plz help me out..
helpful answers wil b awarded.
Thanks,
Jayshree

Hi Jayashree
Please check this FM, SUBST_GET_FILE_LIST. Pass the file path and file name, if it returns an entry in table FILE_LIST, then the filename and path are valid.
Hope this helps !
~ Ranganath

How Standalone OC4J and the Oracle Application Server linked to each other

Hi ,
Please let me know what is the relation between a Standalone OC4J and the Oracle Application Server ?
In my application The Oracle Application Server is installed in C drive and there is a Stand alone oC4j .
Please tell me how they are linked to each other .
Thank you .

It depends on your need and what features and functionality of Oracle Application Server you are interested in. Note that OC4J is a component of Oracle Application Server that can run as a standalone component or within Oracle Application Server. Question #6 in earlier mentioned FAQ document states:
OC4J standalone is J2EE 1.3 compatible (1.4 and 1.5 too in later releases of OC4J) and is able to be used in both development and small scale production environments. OC4J standalone provides its own inbuilt HTTP/S listener to allow clients to execute Web applications that it has deployed. Application deployment and server configuration of OC4J standalone is performed by the manual editing of a simple set of XML files.
For large scale enterprise deployments, the Oracle Application Server product is likely to be more suitable with its comprehensive feature set including Oracle HTTP Server, process monitoring and management capabilities, and its configuration and management console.
So if you are happy with what you see in standalone OC4J and scalability isn't an issue for you, you can stay with standalone OC4J and don't need to move to Oracle Application Server.
PS: If you do decide to use OC4J that's embedded with Oracle Application Server, you can't move your standalone OC4J inside Oracle Application Server. You will have to reconfigure embedded OC4J again (as you might have done with standalone OC4J) and redeploy your applications.
Hope this helps.
Thanks
Shail

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

Reports Server and Reinstalling Oracle9i Application Server - URGENT!! Please Help

Similar Messages

Maybe you are looking for