Reports taking unusually long time to load

Gurus,
I am using BO 4.1 SP1. I am trying to open a report on BI launchpad. But it is taking very long time to load. This occurs even when i am trying to access the last instance. Window remains in the following state.
I checked load on the server. But tha'ts fine. What could be the issue?

Hi,
Ok, that's strange because the connection server doesn't actually handle data processing.
(that would typically be the WebiProcServer or DSL_Bridge or DF service (depending on workflow))
My advice would be to turn off 'refresh on open', change viewer technology to "web view" (as opposed to Java rich internet client) and start investigating again from that baseline.
Also, this might be indicative of a BIplatform sizing or APS configuration issue. another option: have you upped your memory allocation to the Tomcat config?
Regards,
H

Similar Messages

Sharepoint Report is taking very long time to load

SharePoint(2010) Report is taking very long time to load and display in first attempt but from the next attempt it loads and display result normally. It's urgent..please help how to troubleshoot ...

Hi Kunal,
is there multiple report viewer webpart on page? if so then SharePoint doesn't do well with multiple report viewer web parts. if possible then merge the reports in one.
Try to implement SSRS caching/ Database snapshots for reporting services, it will help you to improve the performance:
reference: http://msdn.microsoft.com/en-us/library/bb522786.aspx
Technet article to troubleshoot report performance:
Troubleshooting Reports: Report Performance
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

What's in the apple TV update that came out tonight? It's taking a long time to load.

What's in the apple TV update that came out tonight? It's taking a long time to load.

Apple TV Software Update 5.2
Feature
Summary
iTunes in the Cloud
Browse and play your purchased iTunes music directly from iCloud. This feature may not be available in all countries.
Bluetooth keyboard
Use your Apple Wireless Keyboard to control your Apple TV. See this articlefor more information.
AirPlay audio for videos
Send stereo audio from movies, TV shows, and other videos on Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs).
Stability and performance
Includes general performance and stability improvements.
If it's taking awhile to load it could be due to slow network speed or interference. It's around 600MB. If on ethernet, some have reported issues, try wifi.

OEM Grid Control taking a long time to load tablespace information

We use OEM Grid control to monitor many dev/tst/prd databases. OEM is taking a long time to load the tablespace page information on one of our RAC databases (only one all other dbs ok). I have tried going to 1 instance in the environment and it still takes a long time to load the information about all tablespaces in this database. OEM Path is
Cluster: crs > Cluster Database: sid > Database Instance: sid_instance1 > Tablespaces
This is a development environment and it is not a very busy database at this time. Anyone else encounter an issue like this with OEM?
Thanks in advance for any information

user12192488 wrote:
Purge your recyclebin. I had the same problem on one of our databases and realised that the recyclebin was very large. OEM uses the space from the recyclebin as well in order to load tablespace and datafile information.
SQL> purge dba_recycebin;
Worked for me.
Regards,Thanks,
It worked perfectly !
It used to take 4 minutes to view my tablespaces in OEM !!! Now I have sub second response time !
Still find it strange that the size of the recyclebin would have such an effect when viewing tablespace info in OEM. By the way it also sped up the viewing of datafiles in OEM.
Regards,
Mark T.

Discoverer report taking too long time to open.

HI,
Discovere reports are taking too long time to open. Please help to resolve this.
Regards,
Bhatia

What is the Dicoverer and the Application release?
Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1

Discoverer reports taking a long time!!!

Hi all,
One of our clients is complaining that the discoverer reports are taking a long time to run for the last few days, the report used to take 30 minutes before but now is running for hours!!
I have checked the SGA and I have killed the idle sessions but still there was no improvement in the performance.
The version of BI discoverer is 10 and database also is 10g and the platform is win server 2003.
I have checked the forums and they talk about explain plan and tkprof and other commands, but my problem is that i am unable to find the query that discoverer is running i mean once the report is clicked the query runs and gives the estimate time it would take. can some one tell me where this query is stored so that i can check this query,
Also there were no changes made in the query or to the database.
The temp space fills up 100%, i increased the size of temp space but still it goes to 100% also i noticed that the CPU utilisation goes to 100%
i also increased the SGA but still no go.
can someone kindly help me as to what could be causing this problem
also kindly guide me to some good documents for tuning the discoverer.
thanks in advance,
regards,
Edited by: user10243788 on Jan 4, 2010 12:47 AM

Hi,
The fact that the report used to work fast and now not can be related to many things but my guess is that the database statistics were changed and so the explain plan has changed.
This can be done due to change in the volume of the data that crossed a level were oracle optimizer change the behavior but it can be other things as well.
Anyway it is not relevant since it will be easier to tune the SQL than to find what have changed.
In order to find whether the problem is with the discoverer or in the SQL extract the SQL as described above and run it in SQL tool (SQL Plus, TOAD, SQL Developer and so on).
The best way to get to the problem is run a trace on your session and then use the TKPROF command to translate it to a text file you can analyze - you can assist your DBA team they should have no problem doing that.
By doing that you will get the problematic statements/ functions/ procedures that the report uses.
From there you can start working on improving the performance.
Performance is expertise for itself so i'm sorry i don't know to tell you where to start from, I guess the start will be from understanding the meaning of the explain plan.
Hope I helped a little although I wish Ii had a magic answer for you
BTW, until you resolve that problem you can use the discoverer scheduler to run the reports in the background and so the users will get the data.
Tamir

Hyperion Report taking a long time to process local query

Hi All,
I am trying to run a report on Hyperion IR 9.3.1. I am facing a performance issue with this report. I am joining 13 tables using full outer join. Each table is having data about 900 rows and the final output i am getting from the local query is about 11000 rows. This local query is taking a long time to get process about 3 - 5 minutes. I suppose it should run with in 30 sec as number of rows are very few. Can anyone tell me what is the problem with this local query and how the performance of the report can be increased?
Thanks in advance.
Regards
Ujjawal

Be aware that XP takes approx 1gb of your RAM leaving you with 1gb for whatever else is running. MS Outlook is also a memory hog.
To check Virtual Memory Settings:
Control Panel -> System
System Properties -> Advanced Tab -> Performance Settings
Performance Options -> Adavanced Tab - Virtual Memory section
Virtual Memory -
what are
* Initial Size
* Maximum Size
In a presentation at one of the Hyperion conferences years ago, Mark Ostroff suggested that the initial be set to the same as Max. (Max is typically 2x physical RAM)
These changes may provide some improvement.

Ssrs Report taking to much time to load

Hello all,
I have a matrix report which was running nice before some days, but now taking too much time to load
i tested store procedure but it is ok to return same data in 5 seconds
and when i tested in ssrs BIDS side i set 60 sec for dataset timeout option, and it gets timeout
after i set 1000 seconds timeout but it is just rolling and rolling loading
when i check in executionlog of reportserver i found something like ..
TimeDataRetrieval TimeProcessing TimeRendering Status
RowCount
131951 323
95 rsHttpRuntimeClientDisconnectionError 1784
Reply me fast please, Help must appreciated ..
Thanks ..
Dilip Patil..

Hi Dilip,
According to your description, your report keeps loading symbol when rendering. Right?
In this scenario, as you can see in the Excecution Log, it spends a lot of time on data retrieval. Based on the status information, it's the issue on the conncetion. Since you have tested the stored procedure, and it works properly. Please check if the credentials
for data source has permisson to connect the database. You can also Test Connection when creating data source. As you mentioned, it uses Raido Frequency to connection. There might be large network traffic on transfering data.
Reference:
Troubleshooting Reports: Report Performance
Best Regards,
Simon Hou

Quicktimes taking very long time to load-Big Q appears instead.

When posting ipod (small) quicktimes to my .mac account (4 per page), the site is taking a really long time to load-a large Q appears instead of the usual Quicktime video frame for a few minutes. They eventually load, but it takes a long time. I've used this program and these files for a year without incident, and now there is this huge delay for my clients. The files aren't very big 2MB-20MB.
Maybe it's my Safari or Firefox acting up?
Here's the site if anyone is able to have a quick look and tell me if it loads quickly on their machine:
http://web.mac.com/chopperfilms/iWeb/Steve%20Gaskin/Projects%201.html
Any thoughts would be greatly appreciated. Thanks so much.

To wait for 27MB to load is too big or rather long wait for your audience/visitor. Set poster frames for all and use movie ref to load only the one the visitor chooses so they don't get the letter 'Q' and use 'fast start' so loading long or big files feels like less waiting. Were poster frames and movie refs getting done automatically by iWeb before?
I am actually getting the letter 'Q' with a question mark in it 60/40 percent of the time in a QuickTime I posted which I am trying to figure how to get rid of.

DIAdem taking a long time to load 700MB TDMS file to data portal

I'm trying to load a 700MB TDMS file into DIAdem ,4 channels 10Hz sampling rate over 4 days . When i drag the file into the data portal , diadem freezes up , its on a 2GB machine, file located on the desktop, not running any other programs and it went 50min without being able to load before i made it quit. seems to work fine on smaller files though . Was wondering if this sounds normal and if anyone knows a way around it.
yin
Solved!
Go to Solution.

Thanks for all your input.
YongqinYe and Brad : I've tried defragmenting but this also seems to be taking a long time (in excess of ) on 2 different machines. The index file is 300MB, so about 75% of the *.tdms,
Otmar: i also tried registry loading the data but this still took a long time on this particular file although it worked great on smaller files (5MB).
Brad : the file does not open in the labVIEW TDMS viewer although i'm able to view it in chunks of 65000 using the TDMS importer for excel.
Stefan: the file does have explicit time stamp channel .
Any extra help would be appreciated but the way I'm thinking of doing it now is to use much longer buffer size (from only 6 to a few hundred) when collecting the data to decrease the level of fragmentation.

Ichat taking a long time to load

When I was trying to load ichat the other day it took forever to load. Also the computer made a thud system sound. What was the sound all about? Also what is up with the long load time? I was using a wireless connection at the time. Please Help.

Hi David,
It sounds like your computer was taking a long time to read the app from the Hardrive.
The "Thud" does not sound good to pardon the pun.
Is everything working ok now ?
Use Disk Utility in Applications/Utilities to check the drive/disk
9:53 PM Sunday; July 2, 2006

Edge Animate .oam files taking a long time to load or not loading at all?

http://pierosalardi.businesscatalyst.com
Is there a way to correct this? I have exported this Muse Site and uploaded into my server and the same thing is happening: http://pierosalardi.com/animate/ Its taking to much time to load the .oam files and sometimes they do not load at all.
This is a screen shot after reseting Safari and going to the site. If you see, there is no logo on the up right hand corner, or the icons at the bottom of the page
This is another screenshot after reloading the site. Some how all the .oam files came together but only after reloading the site.
Is there a way to correct this? I saw in another post that needed to replace the iFrame on the Muse html file and replace it with the html code generated by Edge.
Couldn't get it to work.

Hey Piero,
Love your site! I'm not seeing the loading issue, but I'm also on a fast connection so that might be it.
Took a look at the source - it looks like each button is it's own individual OAM file, which increases your load time due to the extra requests the browser has to make to load everything. Have you tried consolidating the left and right button groups into two Animate projects instead of having a seperate one for each button? This may solve your loading problems.
You can copy and paste between projects inside of Animate so aggregating the buttons into one file should be pretty snappy.
Sarah

FF 6.0.2 still having problems with pages taking a long time to load.

Seems that news websites take a long time to load properly
skynews.com kirotv.com are two I use everyday. First time I load the pages, FF seems to have a problem, when I go back to them later, all seems to load fast. This problem happens any time of day.

Did you make any drastic changes to your PC before upgrading to 6.0.1? If not maybe you could do a clean install of Firefox then see what happens. Remember to save your bookmarks, settings, etc. first before uninstallling.

Particular webpages taking a long time to load

Around 80% of the time webpages are loading fine but I'm experiencing frequent problems with a number if sites (outlook.com, google etc.) where the webpage won't load or it will take a long time to load. I've tried loading the pages on IE, Firefox and Chrome, I've cleared the cache on each broswer, cleared my dns cache and the problems still persists. Turning off the Homehub firewall fixed the problem but I don't want to keep the firewall off.
Any suggestions or advice much appreciated.

Try a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 second. This can often sort out configuration problems.

Crystal Report Taking too much time to load

Dear Support team,
Every time I open an existing Crystal Report, it is taking me about 5 minutes to load (Even if its a new and Blank report). Also after one report has loaded for the first time, Loading further reports would take the same long time.
Please note that I was not facing this problem earlier (Same Crystal Report version), this issue started occurring after I came back from a leave, and our IT guy have told me that he had uninstalled the Visual Studio in my absence (License issue), and no further relevant changes that he can think of.
Appreciate your help on resolving this issue, I work with a large number of crystal reports on daily basis, and this problem is killing my time.
Thank you for your time and support.
Best Regards,
Saadeddine Nahlous
Systems Developer

Hello again,
I just found out more info about this problem that might help us troubleshoot it:
My colleague and I were both using the Old Crystal Report version 10 (Before SAP) till about a month ago. Afterwards, I have installed the new SAP Crystal Reports 2013 Trial version to test it, and i faced no issues there and ordered to purchase the product. One week ago, my company bought for me and my colleague two licenses which arrived in two boxes containing two DVDs and we re installed the software using the DVDs. Since then we BOTH are facing this delay issue when opening any Crystal Report. (The delay is unbearable, it is truly about 3 min without exaggeration).
For the record, we both have high spec PCs.
Appreciate investigating this issue with us please.
Thank you

Reports taking unusually long time to load

Similar Messages

Maybe you are looking for