Reports to find contract with Open Price/Quantity

Guys -
Is there a report i can use to find all contracts with Open Price or Quantity? Please let me know!
Thanks!!

Hi,
In the standard reports ME3x (ME3L, ME3N, ME3M, etc), did you try using Selection variant M-OFFEN? Or you could configure one which suits your requirement in IMG> MM> Purch> Reporting> Define Selection Parameters.
Cheers.

Similar Messages

How to find roles with open field values

Hello SAP gurus,
I need to find a way to find roles with open field values. Some kind of report that returns me a list of all roles that, despite having a generated profile, it still contains empty field values in it.
Is there anything like it available on SAP?
Thanks
Antonio

Some kind of report that returns me a list of all roles that, despite having a generated profile, it still contains empty field values in it
Hey I am not sure, but seems I might have seen some report like that. Can you try search report named PFCG* / PFUD*
Again this is either report (SE38/SA38) or may be FM (SE37). I am away from system a bit while and can't recall.
Regards,
Arpan Paik

Is there a way to save Finder windows with open tabs in Mavericks?

I have Finder windows with multiple tabs that I would like to be able to close, if necessary, and reopen with the same tabs open. Is that possible? How?

Thanks, but that doesn't do what I want. I would like to be able to somehow save a combination of tabs so I could close it (while keeping the Finder open) and then reopen it. I think the only way to effectively do what I want is to minimize the window instead of closing it.
Thanks again for your response.
With peace,
Henry

Service Contract with Multiple Prices

Dear Experts,
We are using a periodic billing plan for our service contracts and have an issue regarding pricing. The billing docs are created directly from the contracts using the billing plan. The contracts are multi-year contracts where billing to the customer is done, say @ price1 for year 1, @ price2 for year 2, and so on.. Even though we have maintained price condition PPSV for each of the years,we are still getting only one price(the current price) in the billing plan in the contract. Is it possible to get a billing plan in the service contract to appear as follows:
Year 1 - Price 1
Year 2 - Price 2
Year 3 - Price 3
We are aware that the system will pick up the correct billing price/amount in the billing doc based on the validity of the pricing condition(PPSV) and using suitable copy controls between contract-->billing doc, but is there a way to get the billing plan appear with multiple billing prices/amounts for each year of the contract?
We would appreciate your inputs.
Many thanks.
Regards,
Shareeq

[Useful info|http://www.sapfans.com/forums/viewtopic.php?f=7&t=314620]

Finder crashes with "open as" on audio and video files

My system was restored by Time Machine some time ago.
Since than my Finder crashes whenever i use the "open as" menu on movie or audio files.
I do a ctrl-click and choose "open as" nothing happens like a freeze and than the Finder crashes and starts new. Sometimes the Finder doesn't even appear again, so that i have to use the power button of my MBP to switch it off.
Other file types like jpg, pdf, ... work just fine.
I'm using a MBP, Intel Core Duo 2Ghz with 2 Gb Ram under 10.6.4.
I repaired permissions and even rebuild the launch services but it didn't help.

Hello s:
The only thing I can think of to try is to trash a preference file (com.apple.finder.plist) and restart.
If that does not help, I would reinstall OS X 10.6 (over your existing system and then run software update.
Barry

Create Sales Order with Open item Quantity

Hi,
I would like to ask how can I create an inquiry which will have a record also created in table VBBE. For example. When I create an inquiry, a corresponding record will be created in table VBAK, but I found out that not all inquires will get a record created in table VBBE. What is the steps to do this.
Any help would be appreciated as it is quite urgent.
Points will be rewarded.
Thanks.

An Inquery would not create enteries in VBBK for the reasons mentioned in the previous post.
These are sales requirements, controled by the schedule line category. The ones noremally used in an inquiry do not create enteries in this table because you are not commiting to sell the item.
You need a good business case for changing but you could offer it to the users by creating a new category.

Open Order Quantity in Contracts

Dear Gurus
I am trying to create a report which will show the Open Order quantity of SD Contracts.
This being the figure of the target quantity less the called off quantity.
Please advise on the best method of getting this information, I can see the cumulative order total in the contracts but this is held in a structure (RV45a- KWMENG) and I am struggling to get this information into a report
Many thanks
Tony

Hi Tony,
To the best of my knowledge you will not be able to read value into your report from RV45A- KWMENG. To get this value you need to first fetch the list of subsequent SD documents from VBFA table. Later you need check status of those documents both at header and item/s level using VBUK and VBUP. If you find the open items for documents you need to sum up all those quantities to arrive at a open quantity for the contract using tables VBAK and VBAP
Please keep in mind performance issues which may arrive in this process as it deals with linking of 5 tables. You may need additional database index for the table VBAK (Thanks to check on this point).
Below information may be useful to activate the index:
To activate the index, proceed as follows:
1. Call transaction SE11 and enter the database table VBAK. Choose "Display" and then select "Goto -> Indexes" (Ctrl+F5) in the menu.
2. Double-click the entry I01.
3. Change the option to "Index on all database systems".
4. Activate the index (Ctrl+F3).
5. You must collect the database statistics for the index so that the optimizer can recognize the index (transaction DB20).
Hope this helps you.
Regards,
Praveen

Open Order quantity in Release order of Contracts

Hi all,
We are developing new PO format for Release Order ( Contract) where in we want to print the Open order quantity & Open order value along with Contract number.
What is the best logic for Open order quantity, where in it has consider all the previous release order quantities minus the target quantity in contract.
Open order quantity = target quantity in contract - all previously release order quantities.
Thanks in advance.
MM
MM

hai sajid,
As u said,
open order quantity = total quantity in contract - total quantity released against that contract ( Through release orders )
it is right,
with regards
srinivas

Profit center ledger with opening balance

Hi Experts
Can I have a ledger report for profit center with opening balance, I went and tried in General Ledger option in Financial Reports >> Accounting >> General Ledger. But I am unable to get opening balance respect to profit center. My requirement is to extract a report with all profit center with their openings. Thanks.

Hi,
there is a button named is "Expanded",Click on that.You will find inside dimension.choose as per your requirment and run.
Thanks
Deepak Tyagi

Contracts - Service master price update

Hi All,
There was requirement in which the contract service master prices were required to be changed.
To update new condition price in the condition records, we created a program to update these values using ML52.
Eg. Contract A - item 10- Service S - old price - 100 - Valid till yesterday
                                         new price - 200 valid from today
We have a few problems here
1) Contract A always show old price even though valid price for this service today is 200 for the service S.
Is there any standard program which will correct this contract and get the new price seen in the contract based on the valid date. I.e. the service prices in the contract should always reflect the valid condition record price from ML52.
2) While updating ML52 there were two kinds of records. One with Plant specific and others without plant. Now when I go to contract, select services and select a service line item and click on the new condition record which is valid today and come back. If the condition record is plant specific, the new price 200 is immidiately seen on the contract service master screen. But if the ML52 value was not plant specific, it always shows me 100. What could be the reason for this.
I have tried to give as much details as I can. Let me know incase any more information is required.
Regards,
Shahu

Hi,
Certain condition types can be changed via mass maintenance (transaction MEDL) in a contract, the conditions in all
selected documents are correctly changed. However, even if you display
one of those contracts, the values on item level are NOT updated at all!
This only happens when a MANUAL start of the price determination
occurs, it is NOT performed automatically!
Nevertheless, the user can be SURE that correct príces are found by the system whenever such a contract service is selected, no matter what is written in that contract
itself!
If prices are entered into a contract with different validity periods,
the system does not update them automatically, but one has to use the pulldown menu option
'prices -> find new' after having selected one item line and switched
to the service fullscreen. If you want to update the service
contract with latest price then you have to use the following:
Me32K->item services->service conditions here goto menu
service specipications -> prices-> find New. Then system updates the
price with the current validy date price. In already existing contracts you must carry out a new pricing manually.
Please test additionally the batch input process for price updation in contracts - transaction SHDB.
I can not answer your question regarding the update of non plant specific data. Sorry.
Regards,
Edit

Open PIR quantity, unconverted Pld orders and open Prod/ STO orders

Dear all,
How to deal with open PIR quantity, unconverted planned orders and open production/ STO orders in the next MRP run? Do we need to delete/ reduce them manually?
Thanks and Regards,
Raghu

Hi Shiva,
Thanks for your immediate response. I have still some confusion.
Last month, I have material A with Production order quantity of 30000.
'A' has a component 'B' which is an in-house produced material. Three planned orders each of 10000 were generated for B. Of these two planned orders were converted to production orders. One is still in planned order form.
This month I am not going to use this planned order of B. I get new requirement for A. So during MRP run I get the planned orders for B also.
For the last month requirement, as I have not converted one planned order of B to prod order, there will an open quantity of A prod order in this plant and open STO quantity in another plant. Again the PIR will also be not reduced to the same extent. If I reduce the PIR manually or through some reorganization, what about the open quantity of prod order and STO
I think I can TECO the prod order of A. Is there any such thing for STO also?
Thanks and Regards,
Raghu

Sales order BOM with component price

Dear All,
In PP module is there any report sales order BOM with component price?
please help
regards,
Anwar Shaikh
SAP PP / QM

Hi Anwar,
Please see if the below link is helpful to your cause.
[Recalculate the price of the sales order;
Regards,
Abhay Kapase

Standard report to extract contract open quantity

Dear Expert,
I'm facing this problem: I'm using ME80RN to extract information about contracts but I can't find in the field catalogue the "open Target Quantity" field. I know I can find it in ME3L/M but the format it extracts data is not compliance with my needs.
Do you know if I can use other standard report?
Thank you in advance,
Fuffo

ME3M/L use with scope of list ALV. it will help you to download in excel format
There is no other report apart from the above, You need to go for ABAP development
Edited by: Antony James Vijay on Mar 24, 2010 3:36 PM

Quotation report with open quantity

Hi,
Can you please tell me any standard report where i can check how many quantity is open in quoatation.
Regards,
Monty

Hi Madhu,
my means is quotation is created with 10 quantity but againest this quatation SO has become for 5 quantity only.
so i want he report where i can see how much quantity of quatation is still pending to convert into SO.
Hope you will get understand.
Thanks .

Open Target Quantity and Open Target Value in Contract

Hi,
When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value' of contract.
Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
Thanks,
Siddhi

Hi,
Thank you for the reply.
I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
Can anybody please help me with getting this logic?
Thanks,
Siddhi

Reports to find contract with Open Price/Quantity

Similar Messages

Maybe you are looking for