Reports Using WAD

HI Gurus,
Any document related to using of WAD

Hi
Web template creation for beginners:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22;jsessionid=(J2EE3414900)ID1586927250DB10939917069703686750End
Creating Web Applications with the BEx Web Application Designer :
http://help.sap.com/saphelp_nw04/Helpdata/EN/44/b26a3b74a4fc31e10000000a114084/content.htm
Publishing reports in Portal:
Re: Publishing web reports in PortaL
Regards
ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 10, 2009 6:20 AM

Similar Messages

Unable to create web reports using WAD in BI 7.0

We are unable to create web reports using WAD in BI 7.0 because of the missing BI metadata. Please take a look at the error below .

didnt see the error??

Long Texts in BI: displaying in Web report using WAD

Hi, Gurus!
Assumtion is that:
*) user uses EP portal to access BI reports;
*) these reports are pre-formatted, preferably-static, and with print option (maybe via xls or pdf format);
*) Win Gui is NOT an option to use in EP;
Here is the Question:
Is there any ready-made recipe how to get BI reports containing Long Texts on web (most possibly by using WAD - Web Application Designer)?
There are two great blogs by Eugene Khusainov:
*) <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3766">https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3766</a>
*) <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3768">https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3768</a>
These ones deal with this question in Bex WorkBook.
I'm looking for similar solution as in above mentioned blogs, but only for the web (EP). Thus would like to get your opinion before reinventing the wheel.
Thanks a lot in advance for all ideas!
--- Kaspars
P.S. Have gone through several SAP docs, but had not find an exact solution...
P.S.S. in case you have some ready-made-docs, please use the following e-mail: [email protected]

Hi, Prakash!
Thank you for the suggestions! The document you mentioned is a very good as such. However in my case it doesn't seem to be a solution.
Could you please elaborate on your comment regarding "rendering with XSL" ...?
Thanks,
--- Kaspars
NOTE to clarify 'static': I am not looking for a precalculated report/document. It should be like a normal query. But from a users point-of-view it is just a report he/she can ONLY print out. That's it; no drill-downs, no filtering, no nothing.
Wouldn't there be these long texts (texts in several columns, that should be displayed as one column) + header & footer formatting;... Then I could use regular EP iView template (and pure query made in BEx Query Designer as data source within it).
NOTE 2: user just have to click on a hyperlink in EP to access this report. No parameters should be submitted by user.

Comment for a particular cell in the report using WAD

Can some one help me how to write the comment for a particular cell using WAD which will be published on to the portal

Hi Pavan,
In order to modify particular cells in WAD you would need to use the table interface. Refer to this document:
https://websmp104.sap-ag.de/~sapdownload/011000358700000305572005E/HowToTableInterface.pdf
Hope it helps,
Regards,
Nikhil

Display reports from BW using WAD on blackberry

Hi All,
I have to display reports from BW using WAD on blackberry
can any one please guide me how to do it?
awaiting Reply
Thanks & Regards
Prasad

you have to integrate SAP Mobile infrastrcture with BW system to achive this.

How to define roles for the reports that i have created using WAD?

Hi all,
Can anyone let me know how to define roles for the reports generated using WAD. And what is the procedure for creating and defining roles. Is this process take care of Bw consultant nor the basis guys.
Can anyone let me know the entire procedure about the roles in bw 3.5
thanxs
haritha

Following links might helps you
create a role
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&

Open a crystal report from WAD with passing the variables values

Hi,
I need to know is there any way to link SAP WAD to crystal reports (open a crystal report from WAD)and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Maybe we need to pass parameter by WAD URL but this is just my assumption and have no idea how to do this with passing variable values.
right now I know the method of how Bex queries which are used as data source for crystal reports but in my current scenario we have the structure like this that bex queries link with WAD and then WAD is linked with crystal reports.
No doubt that Crystal report is target option in RRI but there the source is Bex Query only but in current scenario we are looking WAD (web template) as a source to crystal report or crystal report called in WAD.
Please suggest something on same.
Thanks
Take care
Vishal sharma

Hello Vishal.
Did you find a solution for this problem?
I'm facing right now the same problem, I need a way to link SAP WAD to crystal reports (open a crystal report from WAD) and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Have found an answer to this issue? If yes, please kindly inform how have you solved this.
Best Regars
Armando Santos

Query Selection Screen in Report Designer/WAD

Hi Gurus,
Please help. Iam try to copy two BEx queries into one report using Report Designer & Web Application Designer. Iam sucessfull in it, however when I execute the report either by report designer or WAD, the report does not populate the selection screen, it just gives you the output of the two queires into one page. Is there a pre-settings we need to perform to get the selection screen for each of this report?
Thanks!

Hi,
Front-end upgrade will not help in this case. This feature "Display Variable Screen [VARIABLE_SCREEN]" was introduced in SP8 backend. You need SP8 backend to be able to use it.
You will find this setting in "Properties" -> "Web Template" (in combo box) -> "Web Template Parameters" -> "Behaviour" -> "Display Variable Screen"
This setting is defined in metadata and required an implementation on Java side (also SP8 required)
Regards, Karol Kalisz
SAP BI Development

Variable input values issue with Portal reports in WAD

Hi Gurus,
We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
Regards,
Yada

Hi Hari,
Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
Regards,
Yada

Jumping one report to other report in WAD

Hi,
I have to jump one report to antoher report in WAD(for web reports).
I know we can do for bex reports RRI.For web reports what setting I have to take?
Sridhar

Hi,
Nothing special setting you need to take care of. because if you specify the RRI's then you can use the same reports in WAD and once you execute the same report,if you right click on the report you can get the option like GOTO and the target report name.
Ex: i will give the example of my project reports. we have created secialized web templates for 2 reports.
1. AR Aging report
2. AR detail report.
after executing the AR aging you can right click on the web report and you can see the option GO TO-->there you can choose the detail report. so that you can go to the detail report.
Hope its clear..if you have still any doubts,please let me know.\
Thanks,
Ashok

Oracle report use 90% of CUP

We continue see this oracle report errors recorded in NT event log.
"The script started from the URL'/r30cgi32.exe' has not responsed within the configured timeout period. The HTTP server is terminating the script."
When those error occurred, the CPU utilization went up to over 90%. The data for the generating the report is getting from the SQL server 7.0.
Thanks for any suggestions in advance.
Wade
null

Go to Reports Home page. There's tons of usefull information there.
http://www.oracle.com/technology/products/reports/index.html
What could be interesting could be to check the "Oracle by Example". A link if found on that page! As first step try the "Creating a Report Using the Report Wizard". On the page there's also a link to "Getting Started with Oracle Reports" (check this first).
For developement you should install Developer Suite 10g (9.0.4), and for deployment you'll need Application Server 10g (9.0.4). On the page above, a link is provided top left ("Downloads").
Regards,
Martin Malmstrom

Fetch table value in BEX Web report using Javascripts, and assign condition

Hi Gurus,
I am currently using WAD 3.5. I need to change the web report to behave like below :-
1. Default layout (Field A B C) with condition A & B activated.
2. If the drilldown Field B and C is removed, leaving only field B alone in the report drilldown, deactivate condition A & B, Activate condition C & D.
3. the above can be reversed where user drilldown field B & C into the layout, the condition A & B need to then be activated back.
So I believe this can be done using Javascript. So my questions are below
1.) How do i fetch table value for the navigationblock ? with navigationblock i am able to know what are the columns are in the drilldown (i will not display free characteristics, so ignore this part). how do i read the content of NAVIGATIONBLOCK_1 as shown in following code? using javascript.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="NAVIGATIONBLOCK_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="SHOW_FREE_CHARACTERISTICS" value=""/>
 <param name="SHOW_NAVIGATION_ICONS" value=""/>
 <param name="SHOW_FILTER_ICONS" value=""/>
 ITEM: NAVIGATIONBLOCK_1
</object>
2.) After question 1.) is done, please advice how do i activate/deactivate the conditions? based on the fields found in above. Maybe I can use IF navigationblock_1 contain field A only, then set condition A & B , etc.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="CONDITIONLIST_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CONDITION"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 ITEM: CONDITIONLIST_1
</object>
I would appreciate if we can solve Question 1 first before proceed to 2.)
Please advise. Thanks

Hi JTi,
what i have understood from your requirement is that you want to access the web item table_1 in javascript, you can get that as below:
Add

tag before your web item and set its id to table.

<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TABLE_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="CAPTION" value="jezel"/>
<param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
<param name="BLOCK_SIZE" value="0"/>
<param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
ITEM: TABLE_1

In javascript access it as :
var mytable = document.getElementsById("table");
Hope this helps
Thanks
Dipika

Report using SOP

dear
can i configre a report using SOP and not run mrp only for running report and these are the fields which i require
These are the parameters required in that report
1. sales forecast(this is done annually with the monthly break up)
2. sales forecast value
3. actual sales
4 . diff between actual sales and forecasted
5.opening stock
6.purchanse ordering quantity per month
7.goods received
8.closing stock
9.stock index
sales forecast and purchanse ordering quantity are the forecast values which will be feed at the starting of the year
and stock index there is formula to calculate so is for that is there any user exit to calculate that is there any std report for this or using sop 2 get this report
can u pls help me in solving this issue
thanks in advance

1.Hi when you create a infostrucutre as mentioned above you will have 2 tables generated by the infostructure
Ex: you create a Infostructure called s999
2. In such case 2 set of tables will be generated s999 and s999e
3. You will have the values generated through the plannigtype in the tabels999
3.Using the s999 table you will be able to generate the report that are required.
4.When you have created your own info structure you can also use the standard Tcode MC9C - Reporting to get few reports
Kindly let us know if you need more details
Reg
Dsk

Opportunity Product Revenue report using Narrative option

Hi,
I have created quote report using "Opportunity product revenue report" with the use of narrative option and its working fine but the problem here is if opportunity has multiple product revenue items it shows in multiple quotes. For me it should show in a same quotation if there are multiple opportunity product revenue items in a opportunity. Could anyone help me how can i achieve this.
Any help would be appreciated. Thanks in advance
Thanks & Regards
Ambarish

You need to modify report and club all revenue to single item / row.

Creating a service report using SQVI

Hi experts
I am creating a service report using SQVI
The report should have the following fiels
SrvPO No | SrvPO Data | vendor | Stata | City | Type of Srv (Ad\banner|maintnc.) | Amount | Status(open or closed)
I am using the following tables using table join fnc
1. EKKO
EBELN-PO No
AEDAT - PO Data
LIFNR - Vendor
PROCSTAT - Status of PO doc
2.LIFNR
REGIO - State
ORTO1 - City
3. ESSR
TXZ01 - Type of Service (Short text)
4.EKPO
NETWE - Net amount of PO
All the tables are legally join but after executing I am not able to fetch any data or hardly one service PO.
And the selection field will be only From Date and To date.or the Service PO No.
Immediate response is urgent
Regards
Partha

Moderator message: you said your issue is solved but did not mark your discussion as such, please see
How to close a discussion and why

Reports Using WAD

Similar Messages

Maybe you are looking for