Reports visibility for all visible records
Hello everyone,
In our aplication, users can view a lot of records but do not own many records(to maintain data integrity). I want the users to see all records in the reports which they can view in the application.
For example, users are NOT owners of a Contact or an a Contact Team. However, they have the access level "Can Read All Records" for the contact object. Is there a way I can get them to see Contact records on a report?
Any help is appreciated.
Thanks,Sameer
Thanks so much Antonio. It seems my requirement will be met by CRM On Demand R17. Please see excerpt below:
Analytics Visibility
In Release 17, CRM On Demand will provide greater control and flexibility over data visibility in Analytics. Previously, as an analytics user, you were only granted record access for records that you owned or that were explicitly shared with you via team access. The read all access settings maintained in Role Management will now grant read all access to records in Analytics. Read-all access may be specified on an individual object basis. For example, if you have read-all access for Accounts but not for Opportunities, you will see all Accounts but will see only Opportunities that you own.
Is there a way/workaround to do the highlighted part in R16?
Thanks,
Sameer
Similar Messages
-
Key focus is not visible for all objects when tabbing
I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi 22 KB -
Global object visible for all sessions in WebDynpro application
Hello everybody,
in a normal java web application you have the possibility
to put an object into the servlet context.
This object is visible for all sessions(e.g. some configurations or global settings for the
web application).
Now my question:
Is there a possibility in a WebDynpro application to put such an object into a "global context" visible for all sessions?
So I am looking for a container in WebDynpro which has
the same behaviour like the servlet context in a web application.
Thank you for your ideas an suggestions.
Greetings
AntonHi Anton,
To make an Variable Global ,you have define variable at various levels based on Usage.
1)Ex: If you want to define Variable between two different Components . when A component is embedded into B Component then you have to define at Component Interface level and Mapping has to be Defined.
2) If you want to make Variable to be used within the component among the Iviews ,then you can define at Component Controller or Custom Controller and Mapping has to be defined at Iview Level.
3) If you want to use Variable between two Webdynpro Iviews then you have define the eventing mechanism to pass the values among the EP Webdynpro Iviews.
Hope this answer helps you.
Thanks
Madhan -
Report to list all infotype record per employee
Hi All
is there a report that list all infotypes record per employee ?
thanks for helping
CorinneHi,
It will not be feasible as all the IT has different fields.
There is no standard report as Mr, Raghu mentioned.
Ketul -
Make application visible for all users
New user of Imac..... Different users set on my IMac. How to make new applications visible by all users ?
thanksAny application installed on the computer by default is usable by all the users. If you have an app you want in each users Dock that isn't there by default here are instructions. Locate the app in the Applications folder and drag it to the Dock for each user.
As someone new to OS X, I'd recommend bookmarking and using:
Mac 101
Switch 101
Find Out How Video tutorials
List of Useful URLs for switchers -
How to run report to show all the records in the form view of Siebel 8.1.1
Hi.
My template has "for-each" section and there are more than 1 records in the form view. But when generating report, there is only one record in the report. Can anyone offers help? Thanks a lot.
Edited by: user11948585 on 2009-11-18 下午6:08Hi ,
Could you generate a sample XML from BIP Administrator for the IO on which report is based , and apply it to RTF and see if you are getting the desired values.
Thanks!! -
Hi,
Is report painter can be use by MM,PP,SD module ?
in ECC6, we can use report painter for module FI, how about module MM,SD and PP ?
if it can use for those module too, how is the step?Hello Callia Raissa,
Yes report writer can be used in logistics also. One of the way which I am aware of is described below.
Flexible analyses allow you to can tailor the way in which key figures are combined and aggregated. This means that it is possible to both provide administrators with detailed information and management with aggregated information.
Flexible analyses enable easy access to the Report Writer, a user-friendly tool with which you can create reports for various analyses. The Report Writer is integrated in other SAP applications, such as Extended General Ledger and Cost Center Accounting.
Evaluation structures form the interface to the Report Writer. Evaluation structures consist of characteristics and key figures and are easy to construct.An evaluation structure with the same name exists for each information structure in the standard system.Even the self-defined information structures created in Customizing can be evaluated via the flexible analyses.
Evaluations:You can create an evaluation on the basis of the evaluation structure.
To define an evaluation, all you need to do is select the characteristics and key figures you require (pick-up technique).One of the especially useful features here is that you have the option of tailoring the layout of your report to suit your particular requirements. You can also define extra key figures for the reports, which are derived from existing key figures by means of calculation formulas. You can thereby multiply the key figures or divide one key figure by another.
============================================================
In addition to the above you can also edit a report in logistics module with the help of a report writer. below mentioned is the process for it.
It is now possible to edit your report data using the Report Writer. You can also change the layout of the report. The most important functions of the layout design are summarized below.
Summation levels:In the report screen, you can use the menu sequence View ->Summation level to specify the number of summation used to calculate total values. All totals that do not lie within the specified interval will be hidden. A summation level corresponds to a hierarchical level (for example, material level). Summation level 1 is the lowest hierarchical level. Summation level 2 is the next level up, and so on. The individual values are on the summation level 0.
The summation levels can be specified both universally (for the entire report) or locally (for specific blocks of rows). In this case, the local settings overwrite global values.
Report views:If a report is displayed on the screen, the Report Writer will then set page breaks so that exactly one page fits into the current window. This view will be defined as the standard view. As the Report Writer always processes exactly one page, you can only use the page keys and page icons to page up and down; the scroll bars cannot be used.
The page view can be determined via Settings-> Page view. The page breaks in the page view correspond to those defined in the report layout.
Hide and show rows:The function Edit->Hide rows exclude certain preselected areas of your report from the display. You can undo this command with Edit ® Show rows.
Expanding and collapsing report rows:View-> Hierarchy->Collapse allows you to hide the report rows of the sub-trees that are located underneath. View->Hierarchy ->Expand allows you to undo this command level by level.
If you want to display all the report rows that were hidden by collapsing the hierarchy or restricting the summation levels, select, View->Hierarchy-> Expand all.
View->Collapse all allows you to reduced every row block to the highest summation level.
Texts and Annotations:You can create an annotation for your report.
Select: Extras->Annotation.
You branch into the text editor of the Report Writer.
Via the menu sequence Settings->Texts, you can create and format a title page, the last page, as well as headers and footers using word processing functions.
For example, you can store variables in the header for the author of the report, the date of the selection or the name of the person who last changed the report.
Layout parameters:Using the menu sequence Settings->Layout you can specify the page format, display form, rows and columns of the report according to your needs and you can determine the settings for the graphics function. You can make these layout settings with Report->Save settings.
Hope I had been able to help you to some extent. please assign points as reward.
Rgds
Manish -
How to avoid report running for all the values in roll up of guided naviga
Hi
Thanks in Advance
I have 3 reports on three different pages of a dashboard. (Implemented guided navigation on one column of each report).When I click on value of guided navigation column it guides me to report 2 for that particular value (is prompted), same way for 3 report also till here it works fine.
However when I return from report 3 to report 2 and 2 to 1, the reports are running for all the values instead for the value which was passed by guided navigation of previous report earlier (Value on which I clicked to pass to the next report).
Edited by: 808623 on Nov 9, 2010 2:10 AMYes
Example : If i click on values 'X' in report 1
Report 2 shows results for 'X' only. And if i click on Value say 'Y' in 2 then report 3 shows for only 'Y'. But when i rollup from 3 to 2, Report 2 is showing for all values rather than showing 'x'.
I'm using Link or Image Dashboard Object > Destination>Request or Dashboard (path of previous report)
Edited by: 808623 on Nov 9, 2010 2:37 AM -
Feedback visible for all users?
Hi,
we want to use the feedback option in KM. In the feedback iView under Details SAP says "Feedback allows comments to be sent to the item's author, who finds all feedback listed here. You only see feedback you have sent. You can delete your feedback later."
Our problem is that all users can see and delete the feedback from all users. I tried to change permissions for the resource but had no success.
Any ideas? We are using EP 7.0 SPS 9
Regards,
MarioHi,
Please read the following information:
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/d609f7803111d5992f00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_ep60sp2/helpdata/en/90/7aa6930cb5d24388a2e988f6616231/frameset.htm
When you add feedback you also have to change the service permissions. Only changing your permissions is not enough
If you have done that, other people are not able to change or delete your feedback... -
R12: AP Invoice Batch name visible for all organizations
Hello,
I am having a problem in Payables invoice batches. When querying in Organization A, the user is seeing invoice batches from Org A as well as batches for other organizations.
Note that the batches from other Orgs can be seen but not the details of the invoices when clicking on the invoices button.
Is there a setup to restrict viewing only the batch names created in an organization?
vikWhat version are you on? Are you on R12?
If so, I would check your MOAC (Multi Org Access Control) setup.
Maybe the the responsibility you are querying from has access to multiple OUs.
James Kim. -
Comments on MacBook Pages– how can I make them visible for all users?
When I use Pages on my MacBook, the comments show up as black text in a yellow box on my computer, but when I export it as a .doc and email it to others, it shows up as white text on yellow for some PC users. This makes it hard for them to read my feedback. Why does it do this? How can I prevent it?
hello, can you try it with the method described at [http://kb.mozillazine.org/Locking_preferences]?
-
System msg that are visible for all users
Hi
Does any one know how to create a system msg, that users logged on to ex. /rep, /rwb will see, in ABAP i know you can use SM02, but how to do it in J2ee im lost.
Thanx for your info.
//TordHi,
AFAIK, you can set the System Msg for SLD (SLD -> Administration -> System Message), but not for IR/ID.
Yep, as mentined by Ricardo and there is one more option "Display System Message".. it means, we can create system messages.. i guess try to look in VA, may be u may get an option to create this there.
Message was edited by:
Vijaya Lakshmi MV -
LSMW me51n, how to create one PR document for all the records in the file
HI all,
I need to create LSMW for t-code me51n -Create Purchase Requisition. I`m using Bapi BUS2105, method CREATEFROMDATA, idoc message type PREQCR, basic type PREQCR03. The problem is that the LSMW is creating different idoc and different PR document for every record in the source file. My requirement is to create one PR document for one source file (Every source file is different Purchase Requisition) . I`m trying to do this with writing some code(global functions ) in the 'Mapping and conversion rules' events - BEGINOF_TRANSACTION_, ENDOF_TRANSACTION__..., but i`m not very sure what exactly i`m doing .
Please help me resolve this problem, any help will be appreciated .
Best regards, Emil Milchev.Thank you for you answer.
But I have found faster way of doing it - two source structures, one HEADER and ONE ITEM.
HEADER: one empty text field and identificator for it.
ITEM: everything else.
Then everything was just fine, i`ve mapped the different IDOC segments by PREQ_ITEM fields (equal values in the source file : 10-10-10..., 20-20-20,.... etc.) and put all required fields for my LSMW
SOURCE FIELDS:
Z_ME51N_V2 - MASS_UPLOAD - CREATE create
Source Fields
UPFILE upload file
IDENT C(010) ident
Identifing Field Content: header
TEXT C(001)
UPFILE2 123
IDENT C(010) ident
Identifing Field Content: item
BSART C(004) Document type
BANFN C(010) Purchase requisition number
BNFPO_FOR_MAP N(005) Item number of purchase req. for MAPPING acc.
BNFPO N(005) Item number of purchase requisition
KNTTP C(001) Account assignment category
PSTYP C(001) Item category in purchasing document
MATNR C(018) Material Number
WERKS C(004) Plant
LGORT C(004) Storage Location
MENGE N(013) Purchase requisition quantity
EKGRP C(003) Purchasing group
KONNR C(010) Number of principal purchase agreement
KTPNR N(005) Item number of principal purchase agreement
LIFNR C(010) Desired Vendor
FLIEF C(010) Fixed Vendor
AFNAM C(012) Name of requisitioner/requester
PREIS AMT4(011) Price in purchase requisition
ABLAD C(025) Unloading Point
WEMPF C(012) Goods Recipient
PS_POSID C(024) Work Breakdown Structure Element (WBS Element)
KOSTL C(011) COST_CTR v bapito ?
NAME1 C(040) Name1 - Name of an address
NAME2 C(040) Name2 - Name of an address 2
STREET C(060) Street
DELIVERY_DATE C(008) Date on which the goods are to be delivered
TEXT C(132) item text
STRUCTURE RELATIONS :
Structure Relations
E1PREQCR Header segment <<<< UPFILE upload file
E1BPEBANC Transfer Structure: Create Requisition Item <<<< UPFILE2 123
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt <<<< UPFILE2 123
E1BPEBANTX BAPI Purchase Requisition: Item Text <<<< UPFILE2 123
E1BPESUHC Communication Structure: Limits <<<< UPFILE2 123
E1BPESUCC Communication Structure: Contract Limits <<<< UPFILE2 123
E1BPESLLC Communication Structure: Create Service Line <<<< UPFILE2 123
E1BPESKLC Create Comm. Structure: Acct Assgt Distr. for Service Line <<<< UPFILE2 123
E1BPESLLTX BAPI Services Long Text <<<< UPFILE upload file
E1BPMERQADDRDELIVERY PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPMERQADDRDELIVERY1 PO Item: Address Structure BAPIADDR1 for Inbound Delivery <<<< UPFILE2 123
E1BPPAREX Ref. Structure for BAPI Parameter EXTENSIONIN/EXTENSIONOUT <<<< UPFILE2 123
MAINTAIN FIELD MAPPING AND... :
the MAPPING between two IDOC`s segments:
In first segment:
E1BPEBANC Transfer Structure: Create Requisition Item
Fields
PREQ_NO Purchase requisition number
Source: UPFILE2-BANFN (Purchase requisition number)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_NO = UPFILE2-BANFN.
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO (Item number of purchase requisition)
Rule : Transfer (MOVE)
Code: E1BPEBANC-PREQ_ITEM = UPFILE2-BNFPO.
In second segment :
E1BPEBKN Transfer Structure: Create/Display Requisition Acct Assgt
Fields
PREQ_NO Purchase requisition number
PREQ_ITEM Item number of purchase requisition
Source: UPFILE2-BNFPO_FOR_MAP (Item number of purchase req. for MAPPING
Rule : Transfer (MOVE)
Code: E1BPEBKN-PREQ_ITEM = UPFILE2-BNFPO_FOR_MAP.
After that everything was OK . -
Centrally control all report links for all requests
hi, is it possible to set once then all requests are applied to this setting.
for example, all requests have same report links.
Refresh - Print - Download
if possible, I dont need to set all charts.
thanksthanks ,I have modified dashboardtemplates.xml and it works
but for the embedded (dragged and dropped before modifying the dashboardtemplates.xml) requests, the links are not shown, I need to drag and drop again -
Repeat report pages for 'ALL' selection
On a report Im building Ive placed a dropdown list of selections that get used to filter out the data on the report. Someone who uses the report wants to select something that will generate (N) seperate reports as if they had selected each item in
the list and ran the report. In other words, instead of one big report...generate what appears to be all the separate reports based on the items in the dropdown list. Is there way to loop or repeat the whole report for each item in a list?Hi shiftbit,
Based on my understanding, you want to display the separate reports on each page based on the selected values from parameters.
In Reporting Services, a list automatically provides a container, we can use a list to display grouped data with multiple views. For your requirement, we can embed the tablix in a list, then add page breaks for the list. Please refer to steps below:
1. Specify the group expressions for a list on General page like below:
2. On Page Breaks page, select “Between each instance of a group option”.3. Select the values from drop-down list
of parameters, then preview the report.
Reference:
Lists (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support
Maybe you are looking for
-
Need Help regarding Dual Layer DVD Writer
Hi All, I want to burn a Dual Layer DVD on my Macbook but I am not sure if it the DVD Writer which I have in macbook will support or not. Below are the details of the drive HL-DT-ST DVDRW GSA-S10N: Firmware Revision: BP10 Interconnect: ATAPI Burn Sup
-
I have a question. How do I configure the resulting package so that it won't attempt to overwrite the module and header directories that are set by the current ARCH kernel? For example, I get this error if I do "sudo pacman -A kernel26201-ARCH-2.6.20
-
How do you convert pdf document to a word document on a mac?
-
i am using oracle portal 10.1.4 and trying to use pl/sql to create attributes for a page group. however, there are no information about this inside the API (as far as i can see). i've also been browsing the forums for hours without any luck. if there
-
Cookies I removed. Dumping of Firefox did. On a disk through search that there was webalta - removed. All the same somewhere sits. How to get rid of it forever?