Reports6i:Developing reports of different size(Pre-Printed Stationary)

I am using Reports 6i. I want to generate reports of page size 3.5" (height), 11.5"(width). I modified the layout sections width and height properties.
I am printing reports on continuous Pre-printed stationary with dot matrix printer.
After printing first record, the continuous stationary is skipping 3 records space(It is taking printer portrait height 11" and width 8.5" setting) and after that the next record is printing.
What are the settings to be modify to avoide the skipping of 3 records space in the stationary.
Looking for your help/suggestions
Regards
Krishna Reddy M
[email protected]

Hi Krishna!
I suppose that you have modified properties of the "Main Section" of the "Layout Model" in Object Navigator.
Several things can be checked:
1. In the layout editor click "Edit Margin" button and make sure that the outer black frame (your actual page to be prited) is of the size you want.
2. If you have a repeating frame check that "Maximum records per page", "Vert.space between frames", "Page break after", and some others are set properly.
3. Another approach is to generate your report into pdf file and print it using OS means.
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com

Similar Messages

  • Printing on Pre-printed stationary from XML Publisher

    Hi,
    I have a requirement where a report is to be printed on pre-printed stationary from XML Publisher. The stationary would be NCR paper and has to be printed from a dot matrix printer.
    My first question is whether report generated from XMLP can be printed thro'
    dot matrix printer, coz as far as i know it takes only character format .If yes, do we need any special handling?
    If anybody has any experience related to this problem, please let me know the approach.
    Can mail me at [email protected]
    Regards,
    Satrajit

    Hi Milind
    I see what you've got.
    It is not uncommon to use character mode output for pre-printed stationery.
    This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
    Design and run the report with MODE=CHARACTER from the command line.
    You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
    Regards
    Sripathy

  • Purchase Order Printing on Pre-printed stationary

    I feel very difficult to print my purchase order
    on our pre printed stationary using 6i report.
    Is Text_IO utility help me .. or any other tool is
    there to print critical report on preprinted stationay.
    Presently, I am printing my PO by ORACLE RPT tool. old version.
    Pleae Help Me ..
    Regards
    Milind Nikumbh
    KSPL
    Pune

    Hi Milind
    I see what you've got.
    It is not uncommon to use character mode output for pre-printed stationery.
    This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
    Design and run the report with MODE=CHARACTER from the command line.
    You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
    Regards
    Sripathy

  • Cheque Pre printed stationary

    Dear All,
    I am in the process of developing a Layout for the Cheque Pre printed stationary. I am printing the cheque from the T Code : FBZ5.
    Here when i try to call the Layout and print the cheque it prints only one document that too the last one where as there are more than 5 documents. I can see these 5 documents in the Payment Advice.
    I saw that the New layout is calling the Std Program : Rffous_c.
    Can any body tell how to Go abt it...
    with rgds
    Ranjith Singh

    Dear Sailatha Nagasamudram,
    I am printing the Cheques using the Tcode FBZ5.
    Now we have got the Pre Printed sationary from the Bank amd for that i have created a Layout.
    When we print the Cheque along with a Payment Advice gets printed. I am trying to print all the Payment transactions which are printing on the preprinted stationary. But that is not happening...
    This is the scenario.
    can u help me out in this....
    Rgds
    Ranjith Singh

  • Need help on -- Pre printed stationary. oracle report

    Hi ,
    We have developed new oracle report which prints AR invoices... This is displaying properly from apps.. but when sent to printer .. the first page is printing properly .. from second page onwards .. it is leaving one blank line...
    1 page -- ok..
    2nd page --- 1 line
    3rd page ---- 2 lines ... and so on it is getting incremented one line per page...
    I have checked properties for all the groups and frames .. but no luck..
    Will there be any printer setup causing this problem ... ??
    can throw some light on this ..?
    Thanks in advance ..
    Naveen

    Hello,
    You can take a look to :
    http://www.bizfonts.com/oracle/
    and
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_barcode.htm
    Regards

  • Print the report to different Printers

    Hi,
    We are using Oracle EBS 11.5.10.2.
    We've defined a check printing report , which prints the output to a printer directly.
    We've mentioned this printer in the Concurrent Program definition.
    Its printing the output to a pre printed stationary.
    Now we need to print output to different printers based on the responsibility.
    Can anyone tell me the best way to achieve it.
    Regards,
    Abi

    Currently the report is working like that. In the he Concurrent program definition We've option to set only one printerRemove the printer name from the Concurrent Program Definition Window
    Currently the report is working like that. In the he Concurrent program definition We've option to set only one printer. We need the check printing report to be printed to different printers based on the Set of Books or user. In this case, the following should be helpful:
    - Click on View > Requests
    - Click on "Submit New Request"
    - Enter the Concurrent Program Name
    - Select the Printer from the Printer LOV (under Upon Completion block)

  • Printing from APEX onto pre printed forms - not PDF

    Hi
    What is the best solution within APEX for printing. I am looking to print out data within an interactive report record onto a piece of pre printed stationary. So fields from the database will need to be positioned on certain positions on the print out
    How can this be achieved? I have seen examples generating a PDF but I do not want a PDF to be generated or stored when the page has been printed.

    Or Oracle Reports as a cheaper option, if your infrastructure is suitable.
    Done that for pre-printed forms before - pixel perfect, just not for APEX. But it's easy to call Oracle Reports from APEX.

  • Crystal Report XI Print report on different paper size (A4/Letter)

    Hi,
    I have designed report in Crystal XI using paper sieze Letter. Multipler sites are using this application. User in USA are using Letter size paper and User in Euorpe are using A4 size paper. All reports work fine for USA users.
    When Eurpoe users print the report on A4 size paper which set in Letter size, the report is truncated from Header or footer. They are printing report from Application and application is set on Citix server.
    If Anybody have any idea how to setup Crystal report so it can print on any paper size?
    Thanks
    Bhagvat

    Hi Don,
    Please find the below description.
    Background: Crystal Report XI is utilized to develop and view reports with data source from Oracle based LIMS application (Vendor: LabWare). The reports are printed using network printer on US Letter paper for users located in North America and on A4 paper for users located in Europe. The report format is US Letter and designed to print on both paper formats i.e. Letter and A4.
    Issue: When reports are printed by users in Europe using A4 format paper the printer defaults to US Letter paper (in printer preferences) resulting to data cut off from top and bottom on the printout.
    1)      When report layout is select to A4 during developing reports using CR, the printing preferences changes to A4 when printed and vice versa for Letter format. How can we avoid CR to enforce from changing printing preferences?
    2)     According to Citrix engineers in the company, the printer drivers installed on Citrix servers have nothing to do with printing preferences and CR defaults to paper size based on report design. What do we tell them about doing different to resolve this issue?
    3)    Even though a printer preference of default printer on local desktop is changed to A4, the report gets printed to Letter format result in data cutoff.  We have tried this option with several HP printers from few different company locations.
    Thanks
    Bhagvat

  • Crystal report of label size is not printing correctly

    Hi,
    we have interated  crystal report CR4E version with our application and facing 2 issue when i am generating crystal reports from application.
    we are  having a crystal report designed for label size. 
    1.
    While generate the report from application with output as a pdf browser and print to label printer (DYMO Label Writer 400) all the records(for example:7) are getting printed in a single label .
    when the same report is generated from crystal report software and print to label printer (DYMO prinetr 400) all the records (For example:7 records) it is printing  each record per page (for example :7 pages).
    2.
    When i am generating crystal report of label size from my application and  getting the binary data . When  i am sending this binary data to a label printer(DYMO Label writer 400) i am getting an exception "printer's imageable width is too small".
    i am using CR4E crystal report version and java 1.5 verison.The paper size of the label printer (DYMO label Writer 400)" 30252 Address"
    can any one please help me on this issues.
    Advacne thanks
    Rajesh

    Hi Aasavari Bhave,
    Thanks for your Quick Reply.
    <<Also, when you see the report exported as PDF in the browser, are you seeing all records\labels on 1 page or are they separated across several pages just like in CR Designer>>
    when i export the report all the records are seperated across several pages. i am using adobe print to print the report.
    <<How are you printing the report, using Adpbe print or printoutputcontroller.printreport?>>
    I am printing the report using  in 2 different ways.
    1. Using adobe print
    I have designed the label report for 1.1 height and 3.5 width  in crystal report designer. but when i generate the report with pdf browser as output the report height and width are 11.0 height and 8.50 width.
    2. Using printoutputcontroller
    I am printing the report directly from the application using printoutput controller . when i print using print output controller i am getting an exception "printer's imageable width is too small".
    My application is developed in java. Please help me to display this report in my application as per the page size I mentioned and also how can i avoid the exception  "printer's imageable width is too small".

  • How to create a report with different page sizes

    Hi,
    I would like to create a report with different page sizes, it's possible to do it with diadem?
    When I change the layout parameters, changes afect to all sheets...
    Is there a way to change page size individually for each sheet?
    Thanks in advance.
    Marc

    Hi Marc,
    You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach.  This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
    ' Print PDF Page by Page.VBS
    OPTION EXPLICIT
    Dim i, Path, OldPrintName
    Path = AutoActPath & "2D Stacked"
    Call DataDelAll
    Call DataFileLoad(Path & ".TDM")
    PDFFileName = Path & " Page by Page.pdf"
    IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
    OldPrintName = PrintName
    PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
    PDFResolution = "72 DPI" ' "2400 DPI" , "default"
    PDFOptimization = TRUE
    PDFFontsEmbedded = FALSE
    PDFJPGCompressed = "high"
    PrintOrient = "landscape" ' orient paper
    Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
    PrintLeftMarg = 0.181
    PrintTopMarg = 0.181
    PrintWidth = 10.67
    'PrintHeigth = 7 (read-only)
    Call WndShow("REPORT")
    Call DocStart ' Begin multi-page document/print job
    FOR i = 1 TO 4
    Call PicLoad(Path & ".TDR")
    Call GraphSheetNGet(1)
    Call GraphSheetRename(GraphSheetName, "Page " & i)
    Call PicUpdate
    Call PicPrint("WinPrint") ' Add a page to be printed
    NEXT ' i
    Call DocEnd ' End multi-page document/print job
    PrintName = OldPrintName
    Call ExtProgram(PDFFileName)
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Printing Crystal Report decreasing font Size in web.

    Printer reduces font:
    when we use crystal report`s print button to print report, It reduces original font size....
    I am using Crystal report viewer to preview and print the report in which print mode is "pdf". I tried with "ActiveX" mode but its generate error...
    I using Crystal Report 13.0 in asp.net2010.

    Make sure you are on SP1:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
    See KB [1218753|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733353333%7D.do]
    Next time, don't forget to search these forums and use the search box in the top right corner of this web page to get KBs, wikis, blogs, etc., etc.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • How to print output of XML Publisher report in different trays of a printer

    Hi All,
    I have a requirement in XML Publisher Report. I need to print all pages other than last one in one tray of a printer and the last page has to be printed in another tray of the same printer.
    Can anyone help me out...
    Thank You..

    I do not think it is possible to send all the pages to one tray and send only the last page to a different tray. However, you may review the following notes:
    Note: 357402.1 - How to Print the Output to a Different Paper Size Using XML Publisher Delivery Manager?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=357402.1
    Note: 394130.1 - How To Enable Printer Options Such As Duplex Printing Or Tray Selections For Bitmap Concurrent Programs
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394130.1

  • Setting Paper Size while printing reports in character mode report

    Hi
    I am using developer suite 10g and am able to print the reports in char mode.
    but i have a small problem, i am unable to select the paper size while printing
    i select the parameters in a form and click on run report button
    this button helps me to get the data print directly
    but it takes the paper size as 12" height every time.
    where as my requirement is for difftent sizes. like 6", 9" height
    if i can select the size at runtime i can get my work done.
    can any one help me in this. its very urgent.
    Regrads
    Bhaskar

    HI, I My self writing , who created this question, as I got sucess in changing the font size.
    my dflt.prt in printer folder has the following,
    printer "dflt"
    height 46
    width 130
    after page control(L)
    return control(M)
    linefeed control(J)
    code "1" esc "G"
    code "2" esc "H"
    code "3" esc "4"
    code "4" esc "5"
    code "5" esc "W1"
    code "6" esc "W0"
    code "7" esc "C"
    code "8" control(O)
    code "9" control(R)
    I am able to increase the font size using code &5 and & 6 for the fileds or lables in report.
    But how to reduce the font size ???
    which code should I use in printer file. Our dot matrix printer is of type EPSON.

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

Maybe you are looking for