Reports6i output to PDF on Netscape6.0

Hi,
I am generating my report output in pdf format on netscape browser 6.0. This is showing up a blank page.
I did troubleshooting for this as per the adobe website. But it does not work.
This works well for IE5.x
Thanks,
Shailesh

Hi,
Here is some more information on this.
This is happening only with form method POST.
From a form i am passing the hidden paramters to run a report. Form method GET works fine.
Did anybody encountered this problem before.
Thanks,
Shailesh
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Shailesh Awale ([email protected]):
Hi,
I am generating my report output in pdf format on netscape browser 6.0. This is showing up a blank page.
I did troubleshooting for this as per the adobe website. But it does not work.
This works well for IE5.x
Thanks,
Shailesh<HR></BLOCKQUOTE>
null

Similar Messages

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Report output as pdf

I followed the instructions from OTN "Rendering Oracle HTML DB Reports as PDFs Using Formatting Objects Processor". All installation steps have been performed.
After clicking on the "Output to PDF Document" link I get the following errormessage in a new browser window:
"The requested URL /htmldb_fop_render.jsp was not found on
this server."
I've changed the path in the htmldb_pdf.js file to:
var g_Render_URL = 'http://131.141.11.163:7777/htmldb_fop_render.jsp';
Any ideas?
Thanks for your help

Depending on your environment (I tried the following with AS 10g / J2EE); you should use http://131.141.11.163:7777/j2ee/htmldb_fop_render.jsp - note the additional j2ee.

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

Report Output to PDF

Hi all,
I am facing the following and I am wondering if any of you could help me.
I have developed a number of bilingual reports (english and greek text) using Oracle reports 6i (batch 10) on Windows 2000. The reports are ok ... but when I try to export the output to pdf the greek text gets messed up. Actually, a lot of strange characters appear instead of the greek ones. Metalink states this as a bug, with 2 possible workarounds, either to use Acrobat Reader 3 (!!!!) or to use specific font styles (btw ... I haven't manage to find these fonts anywhere).
I am wondering whethere any of you has faced a similar problem (with greek or any other non-latin language). Does any of you has any idea if the problem is solved with Reports 9i?
Thanks in advance
Kind regards
Ioanna

Hi,
At Reports 6i, you can see greek data in .pdf files, if you use Acrobat3 and Batang(western) fonts.
Maria Karakiza

Converting simple report output to PDF print layout issue

Hi all,
I am converted one report output to PDF format, it is working fine in one DEV sever, but when we moved it to other server the layout of output preview & font size is not coming properly (as same in DEV server) in the new server. I am using the below code, please check & correct me if anything is wrong.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        copies                 = '1'
        cover_page             = space
        destination            = 'LOCL'
        expiration             = '1'
        immediately            = space
        mode                   = space
        new_list_id            = 'X'
        no_dialog              = 'X'
        user                   = sy-uname
        line_size              = 200
        line_count             = 65
*        layout                 = 'Z_65_230'
        layout                 = 'X_58_170'
        sap_cover_page         = 'X'
      IMPORTING
        out_parameters         = mstr_print_parms
        valid                  = mc_valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc EQ 0.
**--Creating Spool Request.
      CALL FUNCTION 'JOB_OPEN'
        EXPORTING
          jobname          = lv_job_name
        IMPORTING
          jobcount         = lv_job_count
        EXCEPTIONS
          cant_create_job = 1
          invalid_job_data = 2
          jobname_missing = 3
          OTHERS           = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
**--Submitting the Report & Get the Output.
        SUBMIT zpsr_submit_prcng WITH SELECTION-TABLE t_ebeln TO SAP-SPOOL WITHOUT SPOOL DYNPRO
                              SPOOL PARAMETERS mstr_print_parms
                              USER             sy-uname         " User for runtime authorizations
                              VIA JOB          lv_job_name
                              NUMBER           lv_job_count
                              AND RETURN.
        IF sy-subrc <> 0.
          MESSAGE ID    sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount         = lv_job_count
              jobname          = lv_job_name
              strtimmed        = 'X'
            IMPORTING
              job_was_released = lv_job_released.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
Thanks & Regards
Avish
Moderator Message: Please use code tags when pasting code snippets. Also paste relevant portions of the code
Edited by: Suhas Saha on Jul 13, 2011 3:05 PM

Dear Alexander,
Thanks for the reply.
In this I am using the FM 'CONVERT_ABAPSPOOLJOB_2_PDF'. I have checked the settings from SPAD that is also same in both servers for particular output device. But the patches are diffrennt in both the servers, the server from which layout is not coming properly having the high level patches in compare to the other server(which is working fine).

To convert Smart Form output to PDF format and send it via email.

Hi Friends,
Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
John

Refer the links -
how to convert smartform into pdf and send through mail
Smartform as PDF attachment to a mail.
smartform pdf and mail
smartform to pdf to mail
Regrads,
Amit
Reward all helpful replies.

Convert Smartform Output to PDF

Hi all,
I am trying to save Output of Smartform in PDF file format. for that purpose i am calling "CONVERT_OTF" FM from my driver program.
But it is giving me Information "OTF end command // missing in OTF data"
while executing FM "CONVERT_OTF". i debug it it is giving Sy-subrc = 2.
Please Help me in this context. I am also givin code of my driver program:
TABLES: vbrp.
DATA: fm_name TYPE rs38l_fnam,
it_invoice TYPE STANDARD TABLE OF vbrp,
it_invoice_wa TYPE vbrp,
it_inv TYPE STANDARD TABLE OF vbrp,
it_inv_wa TYPE vbrp,
invoice_no(25) TYPE c,
invoice_l(10) TYPE c,
invoice_h(10) TYPE c.
Converting Output to PDF Declaration **********
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
bin_filesize LIKE sood-objlen,
outop TYPE ssfcompop, " Output Parameters
cparam TYPE ssfctrlop, " Control Parameters
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
my_tabix TYPE sy-tabix,
file_size TYPE i.
SELECT-OPTIONS doc_no FOR vbrp-vbeln.
SELECT vbeln posnr fkimg vrkme meins netwr matnr
FROM vbrp INTO CORRESPONDING FIELDS
OF TABLE it_invoice
WHERE vbeln IN doc_no.
Inserting Unique Invoice Numbers for Displaying Individual Details in
Smart Form
LOOP AT it_invoice INTO it_invoice_wa.
AT NEW vbeln.
MOVE it_invoice_wa-vbeln TO it_inv_wa-vbeln.
APPEND it_inv_wa TO it_inv.
ENDAT.
ENDLOOP.
invoice_no = doc_no.
invoice_l = doc_no-low.
invoice_h = doc_no-high.
suppressing the Print dialog box *********************
*outop-tddest = 'locl'.
*cparam-no_dialog = 'X'.
*cparam-preview = space.
*cparam-getotf = 'X'.
START-OF-SELECTION.
Calling Smart Form *********************************
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSB_SMARTFORM_INVOICE'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
CALL FUNCTION fm_name
EXPORTING
invoice_no_h = invoice_h
invoice_no_l = invoice_l
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = outop
user_settings = ''
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = tab_otf_data
JOB_OUTPUT_OPTIONS =
TABLES
it_invoice = it_invoice
it_inv = it_inv
***removing the initial and final markers from the OTF data*********
DELETE tab_otf_data-otfdata WHERE tdprintcom = '//'.
searching for the end-of-page in OTF table************
READ TABLE tab_otf_final WITH KEY tdprintcom = 'EP'.
my_tabix = sy-tabix + 1.
appending the modified OTF table to the final OTF table****
*INSERT LINES OF tab_otf_data-otfdata INTO tab_otf_final INDEX my_tabix.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
write :/ bin_filesize.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = bin_filesize
filename = 'E:/Test.pdf'
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = file_size
tables
data_tab = pdf_tab
FIELDNAMES =
Help will be rewarded.
Regards,
Sachin

hi
good
go through this ,hope this ll help you to solve this problem
Check out the following documentation and example program and help links
s_control_parameters-no_dialog = 'X'.
s_control_parameters-getotf = 'X'.
CALL FUNCTION v_func_name "call your smartform
EXPORTING
output_options = s_output_options
control_parameters = s_control_parameters
IMPORTING
job_output_info = s_job_output_info
call function 'CONVERT_OTF_2_PDF'
tables
otf = s_job_output_info-otfdata
lines = t_pdf
here is the example for SAMRTFORM TO PDF.
http://www.sap4.com/wiki/index.php/Genera_PDF_a_partir_de_Smartforms
Example Program
data:
fm_name TYPE RS38L_FNAM, "Smart Forms: FM Name
sf_name TYPE TDSFNAME
value 'YOUR_FORM_NAME', "Smart Forms: Form Name
P_OUTPUT_OPTIONS TYPE SSFCOMPOP,
P_JOB_OUTPUT_INFO TYPE SSFCRESCL,
P_CONTROL_PARAMETERS TYPE SSFCTRLOP,
P_LANGUAGE TYPE SFLANGU value 'E',
P_E_DEVTYPE TYPE RSPOPTYPE.
data:
P_BIN_FILESIZE TYPE I,
P_BIN_FILE TYPE XSTRING,
P_OTF type table of ITCOO,
P_DOCS type table of DOCS,
P_LINES type table of TLINE,
name type string,
path type string,
fullpath type string,
filter type string,
guiobj type ref to cl_gui_frontend_services,
uact type i,
filename(128).
GET SMARTFORM FUNCTION MODULE NAME ---
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = sf_name
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = P_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
****...................................PRINTING.........................
CALL FUNCTION fm_name
EXPORTING
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
(....) <--- your form import parameters
IMPORTING
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
****...................................CONVERT TO PDF...............
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
BIN_FILESIZE = P_BIN_FILESIZE
TABLES
OTF = P_OTF
DOCTAB_ARCHIVE = P_DOCS
LINES = P_LINES
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate 'xxxx' '.pdf' into name.
****..................................REQUEST FILE NAME.................
create object guiobj.
call method guiobj->file_save_dialog
EXPORTING
default_extension = 'pdf'
default_file_name = name
file_filter = filter
CHANGING
filename = name
path = path
fullpath = fullpath
user_action = uact.
if uact = guiobj->action_cancel.
exit.
endif.
move fullpath to filename.
****..................................DOWNLOAD AS FILE................
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = P_BIN_FILESIZE
FILENAME = filename
FILETYPE = 'BIN'
TABLES
DATA_TAB = P_LINES
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
reward poing if helpful..
thanks
mrutyun^

Every time I create a button it moves to the centre of the page when outputing to pdf

every time I create a button it moves to the centre of the page when outputting to pdf
I have done a load of tests and it does it every time
I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
In previous version of Indesign I have never uncounted this problem.
2 weeks later to above post
Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

every time I create a button it moves to the centre of the page when outputting to pdf
I have done a load of tests and it does it every time
I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
In previous version of Indesign I have never uncounted this problem.
2 weeks later to above post
Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

Smartform Output to PDF conversion

Hi experts,
i want to convert the smartform output to PDF Format and stored it in system level.But i got the following information message "OTF end command // missing in OTF data".
I used "CONVERT_OTF" for conversion of smartform output and "WS_DOWNLOAD & GUI_DOWNLOAD".
wt it means,can i make any changes,if tl me why it shows the message.
points wl be rewarded.
Thank you
chandu
Edited by: Chandu Valluri on Jan 4, 2008 12:56 PM

hi,
*& Report ZPDF_DNLD_TEST2                                             *
*& DEVK904540                                                                    *
REPORT ZPDF_DNLD_TEST2                         .
data: i_otf LIKE itcoo OCCURS 100 WITH HEADER LINE,
      i_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
data: op_option type SSFCTRLOP,
      job_output type SSFCRESCL.
op_option-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = op_option
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
   itab1                      = itab1
IMPORTING
DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            = job_output
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
MAX_LINEWIDTH               = 132
ARCHIVE_INDEX               = ' '
COPYNUMBER                  = 0
ASCII_BIDI_VIS2LOG          = ' '
PDF_DELETE_OTFTAB           = ' '
IMPORTING
BIN_FILESIZE                =
BIN_FILE                    =
TABLES
    otf                         = job_output-otfdata
    lines                       = i_pdf
EXCEPTIONS
ERR_MAX_LINEWIDTH           = 1
ERR_FORMAT                  = 2
ERR_CONV_NOT_POSSIBLE       = 3
ERR_BAD_OTF                 = 4
OTHERS                      = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    filename                        = 'c:\test_pdf_sf.pdf'
   FILETYPE                        = 'BIN'
tables
    data_tab                        = i_pdf
FIELDNAMES                      =
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Problem in converting smartforms output in pdf

Hi all..
I am trying to convert smartform's output in PDF file..
I am able to convert smartforms's output in PDF but after that i can't see Print Preview..
Code is following...
REPORT ZMM_R402_FORM_TEST11.
TABLES : VBRK,J_1IEXCHDR.
SELECTION-SCREEN : BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-000.
*PARAMETERS : EXNUM TYPE EXNUM OBLIGATORY.
SELECT-OPTIONS : EXNUM FOR J_1IEXCHDR-EXNUM NO-EXTENSION OBLIGATORY.
PARAMETERS : EXDAT LIKE J_1IEXCHDR-EXDAT OBLIGATORY.
PARAMETERS : KUNNR LIKE VBRK-KUNAG OBLIGATORY.
PARAMETERS : SR_NO(12) TYPE C.
PARAMETERS : DATE1 TYPE EXDAT.
SELECTION-SCREEN : END OF BLOCK BLK.
DATA : FM_NAME(30) TYPE C.
DATA : SR(12) TYPE C.
UNPACK EXNUM-LOW TO EXNUM-LOW.
UNPACK EXNUM-HIGH TO EXNUM-HIGH.
DATA:
      it_otf                 TYPE STANDARD TABLE OF itcoo,
      it_docs               TYPE STANDARD TABLE OF docs,
      it_lines               TYPE STANDARD TABLE OF tline.
Declaration of local variables.
DATA:
      st_job_output_info            TYPE ssfcrescl,
      st_document_output_info TYPE ssfcrespd,
      st_job_output_options       TYPE ssfcresop,
      st_output_options              TYPE ssfcompop,
      st_control_parameters       TYPE ssfctrlop,
      v_len_in                              TYPE so_obj_len,
      v_language                         TYPE sflangu VALUE 'E',
      v_e_devtype                      TYPE rspoptype,
      v_bin_filesize                      TYPE i,
      v_name                               TYPE string,
      v_path                                TYPE string,
      v_fullpath                           TYPE string,
      v_filter                                TYPE string,
      v_uact                                TYPE i,
      v_guiobj                             TYPE REF TO
cl_gui_frontend_services,
      v_filename                         TYPE string,
      v_fm_name                        TYPE rs38l_fnam.
CONSTANTS c_formname        TYPE tdsfname VALUE 'ZTEST'.
*CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
   i_language          = v_language
   i_application        = 'SAPDEFAULT'
IMPORTING
   e_devtype           = v_e_devtype.
st_output_options-tdprinter = v_e_devtype.
st_control_parameters-no_dialog = ' '.
st_control_parameters-getotf = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZMM_402_FORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
**WRITE:/ FM_NAME.
CALL FUNCTION FM_NAME
EXPORTING
control_parameters            = st_control_parameters
    output_options              = st_output_options
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
    EXNUM                      = EXNUM-LOW
    EXNUM1                     = EXNUM-HIGH
    DATE                       = EXDAT
    KUNNR                      = KUNNR
    SR                         = SR_NO
    DATE1                      = DATE1
IMPORTING
   document_output_info        = st_document_output_info
    job_output_info            = st_job_output_info
    job_output_options         = st_job_output_options
DOCUMENT_OUTPUT_INFO       =   W_RETURN
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
.........................CONVERT TO OTF TO PDF.......................
CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize                 = v_bin_filesize
    TABLES
      otf                             = st_job_output_info-otfdata
      doctab_archive         = it_docs
      lines                          = it_lines
    EXCEPTIONS
      err_conv_not_possible     = 1
      err_otf_mc_noendmarker = 2
      OTHERS                            = 3.
........................GET THE FILE NAME TO STORE....................
CONCATENATE 'smrt' '.pdf' INTO v_name.
CREATE OBJECT v_guiobj.
CALL METHOD v_guiobj->file_save_dialog
    EXPORTING
      default_extension = 'pdf'
      default_file_name = v_name
      file_filter                 = v_filter
    CHANGING
      filename                 = v_name
      path                       = v_path
      fullpath                  = v_fullpath
      user_action            = v_uact.
IF v_uact = v_guiobj->action_cancel.
    EXIT.
ENDIF.
..................................DOWNLOAD AS FILE....................
MOVE v_fullpath TO v_filename.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize              = v_bin_filesize
      filename                  = v_filename
      filetype                   = 'BIN'
    TABLES
      data_tab                = it_lines
    EXCEPTIONS
      file_write_error            = 1
      no_batch                      = 2
      gui_refuse_filetransfer = 3
      invalid_type                 =   4
      no_authority                =   5
      unknown_error             =   6
      header_not_allowed     =   7
      separator_not_allowed =   8
      filesize_not_allowed      =   9
      header_too_long           = 10
      dp_error_create            = 11
      dp_error_send               = 12
      dp_error_write               = 13
      unknown_dp_error         = 14
      access_denied                = 15
      dp_out_of_memory        = 16
      disk_full                           = 17
      dp_timeout                      = 18
      file_not_found                 = 19
      dataprovider_exception = 20
      control_flush_error          = 21
      OTHERS                           = 22.
ENDIF.
Please Help me ..
How can i see print preview..

use like this:
   call function lf_fm_name
           exporting
                    archive_index        = toa_dara
                    archive_parameters   = arc_params
                    control_parameters   = ls_control_param         "Smart Forms: Control structure
                    mail_recipient       = ls_recipient
                    mail_sender          = ls_sender                "Structure for Object ID
                    output_options       = ls_composer_param        "SAP Smart Forms: Smart Composer (transfer) options
                    user_settings        = ' '
                    is_dlv_delnote       = ls_dlv_delnote           "Delivery Note Data: Transfer-Structure for Smartform
                    is_nast              = nast                     "Nast
         exceptions formatting_error     = 1
                    internal_error       = 2
                    send_error           = 3
                    user_canceled        = 4
                    others               = 5.
        if sy-subrc <> 0.
error handling
          cf_retcode = sy-subrc.
          perform protocol_update.
    get SmartForm protocoll and store it in the NAST protocoll
          perform add_smfrm_prot.                  "INS_HP_335958
        endif.
*To read the Spool Number generated
        read table it_job_output_info-spoolids into v_rspoid index 1.
concatenate 'aBC.pdf' into v_file_name.
submit rstxpdft4 and return
          with   spoolno = v_rspoid
          with   p_file = v_file_name.
          clear: v_rspoid.

Line art problem outputting to pdf

I have a problem with exporting pages of a magazine going to print as pdf, relating to line art placed on the page as a bitmap tiff (typically at 1200 ppi). At present I have a workaround for an annoying problem that really needs clearing up ...
I'm using CS4 InDesign and Acrobat (files prepared in Photoshop). So, high-res bitmap tiff containing line art sized (that is, just placed - no resizing in Indesign) and placed in Indesign, looks fine on the page. Output to pdf using 'export' and the resulting file, when viewed on screen, has a thin line down the right-hand edge of any and all bitmap files.
To ensure no misunderstanding, the 'bitmap' reference is what Photoshop calls it - a bilevel file with black lines in it, which enables me easily to overlay other files such as a photo (because the file is black/transparent) and assign a colour or tint to the bitmap, or even a drop shadow etc. I've used this workflow for years, from Photoshop through Indesign, but the latter always gives me this line on the right edge, in the pdf. It did this in CS3 Indesign/Acrobat as well (but never in Pagemaker).
My workaround is to lay a white-filled box over the edge of the file, thus masking it. But of course, that also limits me to where I can place the file - not easily on a graded tint background, not on a photo and so on. So I'd like to solve this.
Any ideas? OS is Win XP Pro (all updates applied to this and the CS programs - I don't believe they make a difference to this problem, as it has existed through several iterations of both OS and CS).
Anyone else seen this effect? Or is it just me? And has anyone a potential solution?
Chris

I think by reason of not knowing what else I can do, I'm heading to the same conclusion - put up with it! I'll certainly try sending a line to print and see if it appears, but for on-screen stuff, I think I have to stick with the safe workaround I use and accept the layout limitations. (Or resort to Pagemaker for the pages that I just cannot do otherwise.)
Seems to me, if people have reported this for years, Adobe might have tried sorting it out. On screen or not, it still must be due to *something* in the file and/or Acrobat/Distiller to allow it to appear. If I create a white greyscale tiff with the same resolution etc, and place it on a page, there's no line down the edge on output - just a white page with a white (invisible) box. If I do this with an 'empty' bitmap file, a line appears ... Both files created in Adobe programs, so it's not me as a user ...
Just me whinging! I'm really coming from the angle that if this is indeed a display problem, it can only be a display problem if there is something in the file for the display to react to (badly phrased that!).
Thanks everyone for your support and ideas - I think that's me finished for now; I have files to upload and then sleep.

PO output type to send a mail to the user along with PO output as PDF file

Hi Friends,
I have one requirement from client.
Client wants the PO output to be converted to PDF format and sent to User while doing the PO release through e-mail. Can anybody guide me how to Configure a New Output Type and convert the PO output into PDF and send to User through e-mail.
Thanks
Nazer

This can be done with the standard form itself.
first find out the output type u r using.
Then goto T-code NACE and then choose EF- purchase order and then select the output type u r using.
Then goto the 'processing Routines' at the lefe side of the screen.
There u can find out the output forms for this output typr u r using. Here add 'Simple mail-7' in the list and then give the program name and the smartform or the script u r using.
We can also give the mail texts for this output form.
After that goto ME22N and then choose the 'Messages' tab and then click the simple mail and in the 'communication method' kindly provide the mail id for which the PO mail has to be sent.
And then the mail can be viewed in the inbox of the recipient.
in this way we can sent the PO mail to the corresponding mail address,.
I guess this will solve ur issue.
Thanks and Regards
Siva
Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM
Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM

How to add body text when sending output as PDF in email?

Hello,
We are using standard SAP to send SD output as PDF in an email (in output type we choose medium 5, email address is taken from customer master. In transaction SCOT is indicated that SAPscript/smartforms are converted to PDF. When the output is generated, we run rsconn01 to trigger the actual sending of the email).
Via form TEXT_SYMBOL_REPLACE we can modify the subject of the email that is send to include e.g. the order number. HOWEVER, in the body of the email that is send, we now only have the PDF, but we also would like to add a standard text in the body of the email. Does anyone know how to do this?
Thanks,
Alex

Hi,
Please refer to the following program and see if it helps you.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
Hope this helps.
Please reward some points if it helps.
Regards,
Amit Mishra

I am trying to output a PDF gallery from CS6 bridge in 10.8.5 on a Mac.

I am trying to output a PDF gallery from CS6 bridge in 10.8.5 on a Mac. No options are available from the pull-down Output arrow.

Hello,
Although not as simple as it should be you can use a program like "Grab" to take a screenshot of the frame in the preview window in iMovie.
http://support.apple.com/en-us/HT201361
Hope This Helps,
Ryan (BURNINGJUNK)

Reports6i output to PDF on Netscape6.0

Similar Messages

Maybe you are looking for