ReportViewer 2014 PDF rendering and search problems (glyphs / rectangles when text copied to MS Word)

I'm using ReportViewer from MSSQL 2014 express in my experiment, use RDLC /local reports/.
I use slovak char-set (šťďňľřôä) - international chars.
When rendering to PDF I use HumanReadable PDF + Use font sub-set embedding.
The report is viewed on the same server as it is generated.
The generaed PDF prints correctly,
but some words cannot be found inside PDF /with ctrl+f/ and
when I copy paste the content to MS Word, those words (it§s chars) that cannot be found are replaced by
rectangles.
Any clue why it this so and how to avoid this issue?
Is there a difference between rendering reports locally /via MSSQL report viewer/ or on the server?
Thanx.

Adobe Professional 8.1.2 - similar problem. Word converted to PDF. Three paragraphs separated by a single space line break. When paragraphs are copied (either with or without line formatting) the lines do not appear between the paragraphs in the pasted material (in Outlook or Word). Only way I can find to make them appear is to make each paragraph a numbered list. Then it works. What is going on? I have tried different formatting options in Word.

Similar Messages

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.

Rendering and Artifacting problems on Mac OS

I am currently deveolping a game and after recently installing Flash Player 11 I have been getting rendering and artifacting issues along with mouse over states of the stage not being recongnized. The swf works fine in the flash preview of Flash CS5 and on a windows machine. The issue only shows up on Mac OS. The problem occurs in Chrome, Safari, and Firefox. This is also occuring on others Macs in the office as well. Link to the game http://bs-dezign.com/2011_Cyclones.swf. The viewing area is down the center of the stage aligning with hud.
Thank you for any help your can provide.
Ben

Welcome to our community
Please click the link below and pay close attention to the sticky topic you should have seen before posting here.
Click here
Cheers and good luck. Rick

Final cut pro rendering and exporting problem

I imported all the video files from my DVD into Final Cut Pro.....and then when I brought them into Timeline...it asks for rendering..even when i did that it is taking too long to be rendered.....also when I put that from 'Safe Rt' to 'Unlimited RT' then it is showing error of dropped frames......so what SETTINGS and PREFERENCES should i use in Easy setup so that this error doesnt occur...and also I dnt have to render the complete DVD videos files of around 2-3 hours in it....Also when I made a new sequence I kept the setting as DV Pal 24 fps.....so which setting should i use????

Sounds like when you converted the footage from the DVD, you converted to the wrong format, or the wrong specs.
With DVD VOB files, normally one would use MPEG Streamclip (freeware) to convert the VOB files to QuickTime DV/DVCpro with AIFF audio at 48khz, 16 bit. In FCP you'd use the DV/DVCPro Easy Setup.
-DH

After effects cc incomplete renders and other problems after installing 2014

i left an almost 5 minute long project rendering last friday only to find out this morning that the first 55 seconds where left out of the render, with my work area set to the entire timeline. in the past i've had some other issues such as no audio when setting the output to audio or corrupted audio when setting it to on.
i'm not entirely positive, but i think this problems started when i installed 2014 a few weeks ago.
anyone experiencing similar issues, do you find a correlation between them and having both cc and 2014 in the same machine?
thanks,
d.

There's no error on the log file, as far as the program concerns it rendered everything correctly.
My machine is an imac (iMac12,2) with 32gb ram and AMD Radeon HD 6970M with 2048 mb of VRAM.
My current settings (for approvals) are QT with H264 compression with audio output set to Auto and I'm rendering at half res, which in this project is 1024x1024 px, the render is taking approximately 4 and a half hours with MP off, last friday I tried it on and after 7 ours it only had less than 25% done and it said it still had 27 hours to go, so I canceled it and switch to MP off instead, it finished the render (incomplete, I found out today) in 2 hours and 38 minutes, plus 42 minutes for the missing portion this morning, which came with no audio.
I haven't rendered uncompressed or prores yet, but I will be doing tonight to see if that yields a different result.
Is this enough or you need more specifi data like solo switches settings, guide layers, etc?
Thanks,
D.

After Effects CC 2014 RAM preferences and performance problem

I have a RAM issue with AE CC 2014.
Soon after updating, I began receiving errors that there was not enough RAM for other applications. I checked the preferences, and sure enough “RAM reserved for other applications:” was set to 0. I then changed it to 6G (out of 16) and restarted the application.
Upon checking the preferences again, the preference was set back to 0. I changed it back to 6, OKd it, then went back into preferences immediately to see if the change took and it did still say 6.
But every time I restart the application it chances itself back to 0!
So I did an experiment to see if AE CC (pre 2014) did the same thing. It’s preferences were set to 3G, so I changed it to 6G for continuity, restarted the application and it stayed at 6.
BUT THEN, I found that if I open AE CC 2014 it not only changes its own preference back to 0 but it changes AE CC back to 3!
In a nutshell AE CC 2014 will change the RAM preferences of both itself and AE CC when it launches, back to a prior RAM amount (default?). In the case of itself: 0G of RAM. In the case of AE CC: 3G of RAM.
Also another problem, which I assume for now is connected, AE CC 2014 will slow to an unusable crawl after about 5 minutes of using it. With no exaggeration, in only bounding box view mode, it would take 6-10 seconds to rotate a single solid a few degrees.
Restarting the application, which takes a good 7 minutes, gives about 5 more minutes of work before crawling again. I’ve changed cache disks as well as stopping to use a disk cache completely with no change.
Thank for any help you can provide!
OS X Yosemite 10.10.2
iMac (27-inch, Late 2013)
3.5 GHz Intel Core i7
16GB Ram, 1600 MHz DDR3
NVIDIA GeForce GTX 780M 4096 MB

After contacting tech support, it turned out to be a preferences permissions problem.
We made sure that in the preferences folder, the Adobe folder had each administrator listed, and each administrator name was set to 'Read & Write'. From there applied that info to 'all enclosed items' and it solved the problem.

PDF Export And Printing Problem

I am using VB 2005 and the Crystal Reports that is bundled with it. I have reports on my website in the Crystal Report Viewer. I have the tool bar showing the Export and Print buttons. When you try to print (or export to PDF) you get an error from Adobe Reader "Adobe Reader could not open 'AcrXXX.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
I can see the file in my temp folder on my c-drive and the file (AcrXXX.tmp) does not contain a pdf instead it contains html for the report (including the report viewer). I tried deleting everything in my temp folder and I still get the error. My desktop is Adobe Reader 8.0 and IE 6 and Windows XP.
The same code will create the PDF on all development and test web servers just not on my production server.
I have no problem exporting a report to Word.

Hello Wendy,
if you are not too sure whether this errro is CR or VS related pls simply try to use one of our samples and see if you can export from htere or if you get the same error:
Sample site for NET:
https://boc.sdn.sap.com/dotnet/samples
general docu:
https://smpdl.sap-ag.de/~sapidp/012002523100005853792008E/walkthrough_supportfiles.zip
specific samples:
https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe

Unknown error - (PARM), .pdf settings and Illustrator problems

I am using Illustrator CS3, and recently I no longer had choices for .pdf settings when saving from Illustrator as a .pdf. The only setting is "Custom" and I can't scroll to another choice. As I understand it, if I load .pdf settings in Illustrator they are available in all Adobe applications (very possibly wrong about that), but when I choose Edit: Adobe PDF Presets, I get an error message: "The operation cannot complete because of an unknown error. (PARM)". Also when I try to save an .eps file as an AI document, I get the message "An unknown error has occurred."
I have thrown away my preferences to no avail, and am afraid I am going to have to reload Illustrator CS3, which I downloaded last year and do not have the disks for, I which I am having a very hard time trying to download again. (This part I guess I have to call about).
I usually work in Quark, but recently worked in some files in InDesign, and that's when this started, I think. Perhaps a coincidence. Many thanks in advance for any help.

AM,
Okay, so sorry. But you and Wade are official, right? Can you help point me
in the right direction for getting replacement disks for my legally
purchased software Or getting download help so that I might re-download?
We are rather unofficial natives here. You should contact Adobe Customer Support about downloading.
You should be able to get rid of the error if you Move the folder, but it is still worth having the backup, even if you upgrade.

Rendering and lagging problems with FCP X

Hello,
I am working on a Mac OS X Lion 10.7.3 (11D50b) - Processor 2.4 GHz Intel Core i5 - Graphics NVIDIA GeForce GT 330M 256 MB and Memory 8 GB 1067 MHz DDR3.
My 30 minute project has been completed but every time I reopen it, there is a short sequence that always needs rendering. It takes a very long time for this sequence to render and FCP X regularly crashes and slows down. The software is very slow and sometimes non responsive.
This is my first try with FCP X. I've been working with FCP 6 and changed to FCP X recently. I’ve imported a lot of jpg and mp4 files. I import with proxy and optimized files and analyzed preferences. I’ve tried running my project with my hardrive as well as my external hardrive.
FCP X is generally lagging and unstable. It also slows down my computer.

mp4 files. I think that is not a good idea to use that format with FCPX. With my camera I have the options to use mov. (native for FCPX) or mp4. I use mov.

Query Based Taxonomy and Searching Problem!

Hi all,
Ive an urgent problem to solve ....
I create some customs properties with dependent values, for example, if I put Country: Germany, I ve three options, (Waldorf,Munchen,Berlin) and so on ...
Then, I create a Query Based Taxonomy, where in some categories Ive a query, with the dependent value (Ex: Waldorf) ... I mean, If City = Waldorf, the document belongs to this category.
So, when I do this, the taxonomy fails ... Only with the dependent value, I mean, if the category is with the base property (Ex, Country) it works.
Plese, help!
Cheers,
Andres.

Hi,
To include a dependant property in a query, you have to enter both parent (Country = Germany) and the dependant (City = Munich) properties in the category.
Hope this help
Kind regards
Vincent

Forum editing and searching problems

How long time do I have for editing my topic ?
How can I search inside my discussion topics ?

You have 15 mins to make changes to a post you've made.
To search your posts enter a search term in the search box when that returns the display will have two additional boxes, one to limit the each to a particular comunity and another to limit the search to a partiular user. Enter your name in this box and re-search.
BTW questions concerning the list itself are best asked in the Using Apple Support Communities section
regards

CreateTextField and _height: Problem with Placement of Text Fields

I'm using createTextField to create several text fields
dynamically. I'm also using an external XML file and a style sheet
to populate the text fields.
My problem is that I'm trying to position the various text
fields on the page so that they are spaced evenly on the page
(regardless of how much content they might contain). I'm trying to
use _height of the prior text fields to place subsequent text
fields, but I'm getting very inconsistent results. When I trace the
value of _height, I get differing results, even if I don't actually
change any of the parameters. So, the question is...is there a way
for Flash to get the height of a dynamically created text field
that's populated via an exteral XML file and using CSS? I know
that's asking a lot, but I'm trying to avoid using scroll bars if
at all possible.
Thanks for any pointers.
Bill

i assume you're using multiline textifields with a fixed
width and autoSize="left".
flash will report the correct _height of your textfields IF
you access the _height property after your htmlText has been
assigned to your textfield. ie, you're probably seeing inconsistant
results because you're not waiting until all data needed to
populate your textfield has loaded.

Foxit reader is default PDF reader and presents a blank page when asked to show a PDF document.

I use Mozilla Firefox and Foxit Reader as my default PDF reader. I go to a web site that has a click-on to a PDF document. Mozilla opens a new tab and presents a blank page with the word "done" in the bottom left corner. The address bar shows the called up document, but no document shows.
How do I correct this?
If I go to IE which calls on Adobe, the document comes up fine.

Things are still not right online with Wells Fargo/Adobe pdf's. I have uninstalled all versions of Adobe Reader, AIR, and Flash Player, and have downloaded the new versions. I did the flash player a few minutes ago when trying to watch a YouTube video sent via email and I received a prompt telling me I needed to upgrade Adobe Flash Player.When I access the list of Bank statements for what I call my main account ( I have two checking, two savings, and one Visa accounts with this bank) the list of ten or so monthly accounts for this "main account" appears. I can click on any one of them, get a blank pdf, click on the refresh button, then the pdf appears; one of the savings accounts is on this same statement.
If I bring up the other checking account or the other savings account, the only entry on the monthly list that pertains to that account is the second one on the list. All the other months are still from the "main account". I can bring up any of those monthly pdf's via the refresh button route.
The Visa account monthly list is good, but I have to click on refresh to view the pdf.
The pdf statements from US Bank work fine.

How do I retrieve my old bookmards and search history from firefox when firefox has been put into a windows.old directory?

I have a new desktop computer of approximately 4 months which is running Windows 8. I had some issues with malware about 2 months back and installed Malwarebytes, and Avast and this seem to take care of the issues. All was working fine until Friday 08/09/13 when at the end of work day my computer decided to restart itself and boot into an 'auto repair' mode which it seemed to stuck in so I left it and came back into the office on Saturday and saw the message 'unable to auto-repair'. So then windows 8 gave me two options - either to restart or advanced options. I opted to do a 'pc refresh' in the advanced options section and what this does remove all applications installed not through the app store and places them in a windows.old folder. So I was able to locate windows.old/users/Carlos/AppData/Roaming/Mozilla/Firefox/Profiles/ but not sure what to do from here.

You're almost there. When you look in that Profiles folder, you should see one or more folders with semi-randomized names. The most recent one probably is your last active profile.
You have a lot of options for how to recover:
* Restore last bookmarks backup ([[Restore bookmarks from backup or move them to another computer]])
* Manually copy over saved password files to your currently active profile folder ([[Recovering important data from an old profile]])
* Attempt a complete "transplant" of your old settings folder to your new installation of Firefox (e.g., this thread: [https://support.mozilla.org/questions/965036 how to install and migrate info to a new laptop with Win 8])

Problem : Auto Correction when Text Messaging

Ok so i have an iphone 4 and I used it recently on a message board forum. i wanted to respond to a user that posted something and i typed " ^^^^ yea "
well not anytime i text message anyone and want to write "yea" it auto corrects to " ^^^^ yea"
i want to keep auto correct on (to fix typos etc) but i dont want the ^^^^ yea everytime i want to text "yea"
any help ????
thanks!

Go to Settings, General, Keyboard, Add New Shortcut and type the phrase and the shortcut you use to type the word. For example, ab would be about. You can go back and delete the shortcuts if you don't want them later.

ReportViewer 2014 PDF rendering and search problems (glyphs / rectangles when text copied to MS Word)

Similar Messages

Maybe you are looking for