ReportViewerBean window zoom options

We built a report viewer that uses ReportViewerBean to run reports that happen to have an automatic data refresh.  The report will be displayed on a fairly large wall monitor, so we're working on report-in-window sizing and other formatting.  We appear to need more zoom options than are in the viewer by default: 25, 50, 75, 100, 150, ..., Whole Page, and Page Width.  How can we add zoom options, for example, moving the scale by 5% instead of the default?   Or, to make the zoom option also a type-in field, where the user could enter something like 96%.
Thanks!

Never mind I figured this out.The inconsistent behavior had to do whether resume was enabled or not. Duh !
Thanks
Bob

Similar Messages

  • Enlarge a section of the screen or at least vertical zooming option

    Isn't there in FCE the zooming funcionality of Logic (Zooming to enlarge a section of the screen to fill the whole window)?
    And if no, is there at least a vertical zooming option?

    I'm not sure I understand what you need.
    In any case if you want to enlarge a section of the clip, you can use the Motion tab of the viewer: open the clip from the timeline into the viewer, open the Motion tab, change Center and Scale until the section you want is centered in the window and zoomed as required.
    If you want you can also keyframe both Center and Scale to move them as you like.
    As another possibility you can activate Image+Wireframe in the canvas, and while the clip is selected in the timeline you can drag the image in the canvas window to move its center, and drag one of its corners to change its zoom.
    I hope this answers your question
    Piero

  • What's with the limited Zoom options?

    Just switched to Pages about a month ago after seven years of using Word for Mac (and 7 years of trying and discarding alternatives, OpenOffice, Scribus, etc).
    Now, I have to say, I'm impressed. I could stick with this but for one thing that's really interupting my workflow: the limited zoom options. Why is there no way to specify the exact amount you want (like say 175%), and why can't you zoom in and out like you can with Preview using the trackpad?
    Both these functions are standard in Apple progs and use regular OS-defined routines (right??). Is there any way to enable them (partic' the trackpad dynamic zoom), say in Terminal?
    I can't live with no options between 150% to 200% on my screen. Please don't tell me I'm going to have to go back to Word again...:(

    Not an error, a design choice.
    And in Numbers the choice is more drastic because there is no way to apply a factor which isn't predefined.
    In Pages it's really easy to edit it.
    I do that for months in my scripts.
    Here is a short script doing only that.
    --{code}
    --[SCRIPT set_Pages_zoom_factor]
    Enregistrer le script en tant que Script : set_Pages_zoom_factor.scpt
    déplacer le fichier ainsi créé dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Pages:
    Il vous faudra peut-être créer le dossier Pages et peut-être même le dossier Applications.
    Ouvrir un document Pages
    Aller au menu Scripts , choisir Pages puis choisir “set_Pages_zoom_factor”
    Tapez le coefficient de votre choix.
    --=====
    L’aide du Finder explique:
    L’Utilitaire AppleScript permet d’activer le Menu des scripts :
    Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case “Afficher le menu des scripts dans la barre de menus”.
    Sous 10.6.x,
    aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
    puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
    --=====
    Save the script as a Script: set_Pages_zoom_factor.scpt
    Move the newly created file into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
    Maybe you would have to create the folder Pages and even the folder Applications by yourself.
    Open a Pages document.
    Go to the Scripts Menu, choose Pages, then choose “set_Pages_zoom_factor”
    Enter the wanted zoom factor.
    --=====
    The Finder’s Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the “Show Script Menu in menu bar” checkbox.
    Under 10.6.x,
    go to the General panel of AppleScript Editor’s Preferences dialog box
    and check the “Show Script menu in menu bar” option.
    --=====
    Yvan KOENIG (VALLAURIS, France)
    2011/08/03
    --=====
    on run
              local coefficient
              repeat
                        set coefficient to text returned of (display dialog "Type the wanted zoom value…" default answer "175")
                        try
                                  set coefficient to coefficient * 1
                                  exit repeat
                        end try
              end repeat
              tell application "Pages" to tell window 1
                        set view scale to coefficient
              end tell
    end run
    --=====
    --{code}
    --[/SCRIPT]
    (1) Don't hope for a major update before 2012.
    (2) The resize handle (which no longer exists in Lion) is not dedicated to change the zoom factor but the size of the displayed area.
    Yvan KOENIG (VALLAURIS, France) mercredi 3 août 2011 10:28:12
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • New user:  I can't find the zoom option (to try and sync audio tracks/sources wav to a clap)

    Hi guys.  I LOVE the rendering speed/quality etc of single videos but I'm running into trouble syncing videos/audio from 3 sources.  Basically I have a Nikon D7000 and an Iphone taking two angles of me playing guitar.  I want to sync all of them to an audio clap or a click but I can't seem to find the zoom option where I can get right in on the wav files to match the peaks of the clap.  I am also having trouble with the video clips I am dragging seem to lock magnetically to other clips or wherever my playback marker is.  I want the clips to drag/move freely (and tiny increments) and not lock into any time interval etc.
    I also would like to find the mute button for some of the tracks.  It seems to be really basic stuff, but I can't seem to locate anything obvious to zoom, drag and get my timeline in sync.
    It took me a long time to sync my audio to an iphone angle for this clip:
    http://youtu.be/4B9TMQg9KXQ?list=UUd_A29XG4JvzkyGNcuXcuiQ
    My D7000 is a MUCH better image, but juggling that, my iphone angle and the audio that gets recorded by my DAW is a struggle.  Any tips would be appreciated!

    thefyn
    Thanks for the reply with details of your Premiere Elements version and computer operating system.
    1. Zooming in on clap in wave form of audio - assorted maneuvers
    You could always change the audio track size, but that is not going to give you anywhere near the detail that you will get by
    alt clicking the audio portion of the Timeline file (to temporarily unlink audio from the video and then double clicking that Timeline
    audio file to bring up its waveform in the Preview Window and noting the clap time at playback there.
    With the video and audio relink again, as you can hold down the alt key and tap the left or right arrow key, you can move the Timeline linked clip from right to left or left to right
    for alignment purposes to the clap time.
    When you need only the video portion of the video audio linked file in the Preview Windows, then you omit the alt click on the audio portion.
    If needed, you could always set unnumbered markers at the Timeline level or in the Preview Windows.
    For Timeline video audio nudges....as you hold down the alt key and tap the right or left arrow key once, you get a one frame nudge per tap.
    As you hold down the Shift+Alt and tap the right or left arrow key once, you get a five frames nudge per tap.
    On other matters...
    2. Please look at right clicking the Timeline and looking a Snap option enabled and disabled.
    3. I will think about it some more but I do not see any way to mute the audio for a whole audio track. You can mute the audio for clips on that audio track but not
    shut off the audio to that one particular audio track. If you wanted to do audio clip muting for more than 1 clip at a time, I could see
    a. copy first file that you muted through Adjust Tab/Adjustments/Volume Panel expanded and
    b. then do a Paste Effects and Adjustments for a selection of all of the other audio files on that particular track.
    Just some thoughts
    ATR

  • Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.

    Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.

    Update:  I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
    I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
    How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

  • I Phone Video Zoom Option

    Hi !
    I bought New I Phone 3G S and I could not find zoom option while shooting and also back option on touch screen.(Hope back option for the previous menu is not given in the feature) Could you tell me the zoom option while shooting video and also foto too
    Message was edited by: Pondu

    Thanq very much for ur reply and manual book
    But Still I am facing problem with my 3G s
    Could any one solve it for me.
    I have bought this 3G s at canada and opened the seal and unlocked the fone @ INDIA. They guy gave me in working condition after unlocking. But after bringing it to home I have updated software to it. Since then my fone is not working and used to get "no service". I have changed two sim cards of different GSM operatore. Even though I am getting the same problem. I have again installed the same sim which I brought when the fone was unlocked. That also not working. Just I have updated the software and its showing like that. I have restored the settings with the sim which I got it from Canada.. It havent worked for me in that way too. I tried to update the software with Indian sim card. I used to get the message in Itunes window that "only compatable sim cards from a supported carrier may be used to activate this phone". * I have done it with canada card and I used to get update page after installing that sim) If I use INDIA sim I even not able to get update page also.
    with canada sim card http://img121.imageshack.us/img121/5038/iphonr.jpg
    with India sim card http://img163.imageshack.us/img163/739/appledb.jpg
    My intension is I dont need software update..I need my fone to work. I am able to get the menu as it is ..but not able to get calls or do calls

  • When I don't have the BROWSER menu option turned on, the WINDOW menu options are un-accessable by mouse

    First of all, I would like to clarify which "menu" is un-accessable.
    I'm referring to the menu that regardless of which program, a user can access by either clicking ALT + SPACE or by clicking the top left corner of the window. I'm NOT referring to the FIREFOX menu options, those I am fine with.
    Normally, I can just move my mouse to the top left corner and double click to close a program. I used to be able to do that too with firefox 3.6. However, due to the new design, when I click the top left corner, I get the orange Firefox drop down menu. This is because firefox, due to the new update, no longer has an independent window bar that is the norm across most programs. The only way I can get this independent menu bar is to enable the browser menu bar. This however, adds two entire layers of bars, which defeats one of the purposes of the update, to give more viewing space
    The Chrome browser also has the tab row on top, however, it doesn't have the issue I brought up. When I click the top left corner of the window, the regular WINDOW menu options pop up.
    The reason why this is important to me is due to the fact that I use two monitors. Normally, I can just move my cursor to the top right and close the window without looking for my right hand side monitor, and then double click the top left hand side of my left hand side monitor to close the window. This is because with a 2 monitor set up, the "X" close button is located inconvinently in the middle of my two screens, forcing me to aim for the tiny small red rectangle, which is why I prefere to double click the top left corner; I don't have to aim.
    I have long been a loyal user of firefox. Browsers like Chrome and others have been out ranking firefox for a long time, mozilla is only playing catch up here...
    While I am glad for the update - better speed due to JaegerMonkey, the added hardware acceleration, the tab groups, and more, if the window menu problem is not resolved soon, this update is going to force me to switch browsers.
    I look forward to a fix, or response on how to resolve this issue.
    Many thanks,
    Still a firefox user... for now

    it's possible but there is likely no need to do this. what exactly is wrong with your computer? a simple reinstall of snow leopard on top of your current system will cure many ills and will preserve your data and applications. and many problems can be solved without reinstalling at all.
    but if you insist on doing a wipe and install boot from the SL install DVD and start disk utility from utilities menu at the top. erase your hard drive using the erase tab in disk utility. then quit disk utility and proceed with the install. and if you do reinstall I suggest you back up your data first. otherwise it will be completely wiped when you erase your hard drive. and you should always back up anyway.
    Message was edited by: V.K.

  • Can we have a Windows 7 option in the My Settings OS list, please?

    Can we have a Windows 7 option in the operatings systems list in "My Settings" please?
    Not having it there tends to add to the impressions among posters that some Apple software (that is supported on Windows 7) isn't supported on Windows 7, or that Apple doesn't really care all that much about about the Windows users. For example, see:
    http://discussions.apple.com/thread.jspa?messageID=10572275#10572275

    Windows 7 option now available in "My Settings". Thank you kindly!

  • Windows Authentication option not available in Windows 8.1

    Hi,
    I am using Windows 8.1 OS. "Windows Authentication" option is not available in my laptop. I navigated to below path.
    Windows Features --> Internet Information Services --> World wide web services --> Security --> in this I am not able to see windows authentication. Please let me know.
    Thanks in Advance!
    Krishna.

    Hi Meipo,
    Thank you for the information and reply.
    I ran command in my laptop. I got below error.
    Image version : 6.3.9600.17031
    Error: 0x800f080c
    Feature name IIS-WindowsAuthentication is unknown.
    Is this problem with OS version? Please suggest me how can I get windows authentication in my laptop.
    Thanks in Advance!
    Krishna.

  • Unresolved bug in adobe reader x with non-default windows zoom level

    This seems to have already been brought up here about a year ago: http://forums.adobe.com/thread/776060.
    I am using Windows 7 Professional 64-bit with Firefox 12.0 and Adobe Reader 10.1.3. Here is a description of the problem:
    Whenever I open any PDF file in a browser (firefox or IE) using the adobe reader I am unable to select text, save the file or interact with the content in any meaningful way because the plugin does not recognise my cursor position. If I click on some text in a PDF document, the reader will immediately highlight a region of text between where I clicked and where it thinks I started clicking from (above 20% of the screen above and to the left of where I actually clicked on the page). If I roll my mouse over the region where the dashboard normally appears, the dash does appear as intended and the cursor changes in response to hover over buttons, as if everything were working, but I am unable to click on anything (clicking does nothing). If I click and hold the dashboard when it appears, it immediately jumps to another region of the page, as if it thinks I moved the mouse (20% up and to the left again). I have recently reformatted and am now using a fresh install, and the issue remains. My desktop zoom level in windows is 150%. The problem appears only inside the browser; viewing PDFs directly in Acrobat Reader X works without issue.
    I can resolve the problem either of two ways:
    a) Reverting back to the default windows zoom level (125%).
    b) right-clicking on the Adobe Reader X icon, navigating to the compatibility tab and clicking "Disable Display Scaling on high DPI settings"
    The workaround is easy but it's disappointing that adobe hasn't fixed this. Please consider that it would mostly affect individuals who are vision impaired and might not have the know-how to resolve the problem or check for solutions online, let alone post comments such as this. As far as I can tell this problem severely impaires the functionality of adobe in any browser on any non-standard zoom windows installation.

    Please be sure to post your issue in the following Feature Request/Bug Report Form.

  • Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen.  They presently move from one to another way too quickly...also need a different pan and zoom option.  Wher

    Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen.  They presently move from one to another way too quickly...also need a different pan and zoom option.  Where are all the options I had in PS10?  Also...Can I burn this to a DVD?

    The changes have brought improvements but also drawbacks compared with the old slideshow editor.
    The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

  • NWDS doesn't display "Window Preferences" Options

    Hi Experts,
    I used to work in Netweaver Developer Studio (NWDS) without any problem, but now when I open "Window >> Preferences" Options, it doesn't display anything. It shows no options on the left side (white navigation panel) and no options on the right side (gray window), but the buttons on the bottom are displayed ok. It is very strange; I can't remember any configuration I have done that could cause this behavior.
    Also, when  I hit "File >> New >> Project", it doesn’t show any portal options (Portal Application, etc.).
    Does anyone have been through this before?
    Thanks in advance.
    Best regards,
    Raphael Barboza

    I'm not sure why this would be happening however since its such a simple task I would first I would re-install to you current patch level. Also, perhaps check your plugins against another NWDS installation.
    Cheers
    Dan

  • Pull out tab pan and zoom option grayed out

    I've been trying to follow this great tutorial about pull out tabs, but have one issue. I've just updated InDesign 5.5 Folio Builder to v.22 and the producer tools to the most recent release on August 7. Here is what I've been doing.
    Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text.
    Group all of them together.
    Create an image box (container frame) that is larger than my grouped content and paste the grouped content into it.
    When I select the image box (container frame) and select Pan and Zoom, all options are greyed out.
    If I clear the content from the image box and put a photo in it, I can use the Pan and Zoom options.
    Any ideas on what I'm doing incorrectly? Thanks!
    Tutorial I'm following.
    http://tv.adobe.com/watch/digital-publishing/pull-out-sliders-and-trays/

    Thanks, for the record, I updated my steps to show the correct process.
    Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text. Create an unassigned box at the top left to "hold" the tab position to the right side of your document.
    Group all of them together.
    Create an image box (container frame) that is larger than the grouped content and paste the grouped content into it.
    Select the image box (container frame) and choose Scrollable Frame with the options - Horizontal, check Hide for Scroll Indicators, and select Upper Left for Initial Content Position.
    Thanks again Bob!

  • No zoom option for camera

    I have an 8900 that was given to me by my sister-in-law. I read that I should be able to zoom in when taking a picture by selecting the menu key, then the zoom option. However, when I do this, the only options I have are help, now playing, view pictures, options, video camera, switch application, and close. Options just show the current settings. Anybody know what I can do?
    Thanks in advance!

    possible workaround for the caller id / contacts issue is to enter in two phone numbers for the people in your contacts, one used for calling them and one used for incoming caller id. Example: I have my phone number blocked at AT&T. Some people dont except blocked calls so I have to use *82 in front of the number to temp release it when i call them, but when they call me the caller id doesn't match their real number with the *82 number I have saved for them, so under each person in this situation I put two phone numbers, one with the *82 used for outgoing calls and one without used for incoming caller id.... you may be able to do something similar.

  • My mouse fell now the scroll/zoom option doesn't work. Any tips?

    My mouse fell from the couch to a carpeted floor. Now the scroll/zoom option doesn't work. Any tips? It landed and rolled a bit.

    Hello:
    I suggest you buy a new one.
    Barry

Maybe you are looking for