Repository 6i to oracle 8i problem.

Hi
I have a linux redhat 7.2 machine running oracle 8i as a server. I installed designer 6i on a windows 2000 machine. I am able to connect to the database locally on the linux server or on the the windows 2000. I checked and the repository owner has all the necessary priviledges.
When I start the REPOSITORY OBJECT NAVIGATOR, the program crashes and I get the following error.
ckron61.exe has generated errors and will be close by windows.
you will need to restart the program
An error log is being created
I also tryed using designer 9i with the same repository but I had the same problem. Could somebody provide some pointer as to what the problem might be. I have been searching for a solution for more than two months. I already try re-installing from the repository from scratch but I ran into the same problem.
Thanks

Hi,
Please check whether the listener is running at remote mode and the addresss parameters in the tnsnames.ora are correct. Check if the service name you entered is correct.
This error can also occur because of underlying network transport problems.
Finally, check that all Interchanges needed to make the connection are up and running.
Regards,
Dipin

Similar Messages

Talend oracle lite problem

we want to use talend in order to migrate data from an sql server to a oracle 11g. the database in oracle 11g is the repository for our oracle lite server.
When we migrate the data we select action on table none and action on data insert or update for the oracle 11g components. We encounter a problem in which oracle lite thinks that the entire table has been changed after talend has finished its update and foreces a full refresh of the table to the users. As you understand this is a great problem because even when only one record has changed (or even none) the entire table is redownloaded on the users.
From what i know oracle lite uses a complicated system in order to understand which records have been changed and therefore require to be updated on the clients. It appears as if talend changes something in the table after it has finished its data migration (perhaps some kind of a timestamp?) and therefore makes oracle lite believe that the entire table with all its rows were changed. i do not know which of the two components cause the error, talend changing something or olite thinking wrong about tables updated
1)why does this happen and how exactly does oracle lite understand which data have been updated?
im using this forum in order to ask if someone has encountered this problem again and how did he solve it
thank you for your time

not used talend, but if i understand correctly, you are using this to transfer data from a sql server database to oracle. I assume the data being put into the oracle database is into tables in the main schema, rather than the mobileadmin schema itself.
For the tables that are being written to in the oracle database, how are they defined in the oracle lite publication (fast refresh, complete etc.) and what happens in the MGP process after the data import has run.
The default process is that for fast refresh objects the following happens.
1) when data is inserted/updated/deleted from the base table, triggers (TABLENAMi/u/d) fire in the main schema, and this causes data to be inserted into mobileadmin.C$all_sid_logged_tables to show the table as changed, and updates made to the CVR$ table in the main schema
2) based on the 'dirty' tables in c$all_sid_logged_tables then the MGP process logs phase will copy data from CVR$ tables to CLG$ tables, and then run the compose to populate the out queue CMP$ tables
it may be that part of the settings are stopping the updates to the CVR$ tables and this is causing a versioning mismatch (normal trigger for complete refresh), so check to see what updates are done to this table as well as the manin data table

Oracle Designer Problem Please help me

Sir,
1) I created a database
2) Run>cd d:\Oracle_home\repadm61\admin\@ckqa
@ckparams.txt
@ ckvalqa
@ ckcreate
3)Opened Repository Administration Utility
Log in as 'repos_manager/repos_manager@orcltest'
Installed Repository.
4) Opened Oracle 9i Designer. I am able to connect
as 'repos_manager/repos_manager@orcltest'
But I am not able to logon as any other user in same database/ any other user in different database. Why?
Please help me.
regards
Mathew

duplicate thread, see this one -> Re: Oracle Designer Problem Please help me

Oracle reports problem in distribution with xml file

Hi ,
I am having problem while I am trying to distribute the file with specifing the destination details in the xml. If I am giving the destination details in url then it is working.
Ex.
This is Working
http://bryxh91:8889/reports/rwservlet?report=devlopersuit/reports/test.jsp&userid=anju/[email protected]&desformat=pdf&destype=file&desname=devlopersuit/reports/output_file.pdf
Not working :
http://bryxh91:8889/reports/rwservlet?report=devlopersuit/reports/test.jsp&userid=anju/[email protected]&DISTRIBUTE=YES&destination=devlopersuit/reports/dis_test.xml
xml file
<destinations>
<file id="test" name="output_file.pdf" format="pdf">
<include scr="mainSection"/>
</file>
</destinations>
Error : REP-34304: Distribution failed to complete; review the distribution lists
Its been week I tried many things , but not working.
Right now I am trying to distribute to single file but my goal is to burst and distribute on basis of account number.
This is the first stage of the project.
Thanks a lot for the help
Anju

Hello
see answer in Oracle reports problem in distribution with xml file
Regards

Is versioned repository part of Oracle ATG Web Com 10 Impl cert topic?

All, Does anyone know if the 'versioned repository' is part of the "Oracle ATG Web Commerce 10 Implementation Developer Essentials" topics ? Oracle University website says that its is part of the certification (http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=13&lang=HR&p_exam_id=1Z0_510) however the Partner website doesn't talk about the 'versioned repository' repository. (http://www.oracle.com/partners/en/knowledge-zone/applications/atg-web-commerce-implement-exam-1529925.html)
Thanks,
Sanju

+1 with Gurvinder. It is mentioned in Oracle ATG Web Commerce 10 Implementation Developer Essentials - Exam Study Guide
http://www.oracle.com/partners/en/knowledge-zone/applications/atg-impl-dev-st-guide-1532521.pdf
Check out Topic 11: Advanced Repository Concepts. The second sample question mentioned there is itself from versioned repository.

Everyones Oracle Linux Problem solved!!!

Everyones Oracle Linux Problem solved!!!
Here's something Linux people should relate to: Use what works!
what works?
NT works! NT works great with 8i AND OAS.
No hassles at all!
Up and running within one day!!!!
Guaranteed!
U don't see a NT forum here with people having ridiculous install problems like Linux people?
Perhaps Oracle should moderate this newsgroup and even give an authorative answer or two?
null

I have switched our development and soon production databases to Linux because it runs like a charm. Fast and efficient, no problems. The installer has been a problem no doubt because Oracle put less of an emphasis on debugging their Linux installer than their idiot-proof NT installer.
By the way, I was able to circumvent installer problems by just linking svrmgrl to svrmgrlO; this avoided the dreaded segmentation fault and kicked everything open just fine.
BTW, about NT; what makes an OS is not how well everything works when everything is going well, but how bad it gets when something goes bad. For instance, the segmentation faults on Linux weren't a problem because I just picked up and continued; on NT you'd have to restart the whole system...not a pleasant feature.
null

Problems launching Repository Assistant from Oracle Warehouse Builder

I have installed the Oracle Warehouse Builder 10g Release 2 although, when i execute the file launch.exe installed at OWB_ORACLE_HOME/bin/, it not work
Somebody know something about this problem?
Postdata: I have Kaspersky antivirus installed as well.

What process are you doing in OWB to get this error?
Did you install the Workflow server?

Oracle 10g- Problem in DB Console

Hi All,
I’m new to the Oracle Domain. My oracle db version is of 10.2.0.1.0, whereas I couldn’t able to open the OEM DB console.
Below are the steps that i tried, but I didn’t found the solution:
C:\>emca -ddbcontrol db -repos dropeconfig
STARTED EMCA at 06-Dec-2008 11:11:52
EM Configuration Assistant, Version 10.2.0.1.0 Productions
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: fieacc
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? yes(Y)/no(N): y
06-Dec-2008 11:12:04 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\fieacc\emca_2008-12-06_11-11-52-AM.log.
06-Dec-2008 11:12:06 oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be p
erformed.
06-Dec-2008 11:12:06 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
06-Dec-2008 11:17:12 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 06-Dec-2008 11:17:13
C:\>emctl status dbconsole
OC4J Configuration issue. D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole
dtvsdbs.DELPHI-TVS.COMfieacc not found.
C:\>emca -deconfig dbcontrol db
STARTED EMCA at 06-Dec-2008 11:21:31
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: fieacc
Do you wish to continue? yes(Y)/no(N): y
06-Dec-2008 11:21:36 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\emca_2008-12-06_11-21-31-AM.log.
06-Dec-2008 11:21:37 oracle.sysman.emcp.EMDBPreConfig invoke
WARNING: Database instance unavailable.
06-Dec-2008 11:21:37 oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be p
erformed.
Enterprise Manager configuration completed successfully
FINISHED EMCA at 06-Dec-2008 11:21:38
C:\>emca -config dbcontrol db -repos recreate
STARTED EMCA at 06-Dec-2008 11:33:38
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: fieacc
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ dtvsdbs.DELPHI-TVS.COM
Listener port number ................ 1521
Database SID ................ fieacc
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? yes(Y)/no(N): y
06-Dec-2008 11:33:57 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\fieacc\emca_2008-12-06_11-33-38-AM.log.
06-Dec-2008 11:34:05 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
06-Dec-2008 11:34:28 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
06-Dec-2008 11:34:29 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
06-Dec-2008 11:35:18 oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
06-Dec-2008 11:35:18 oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\fi
eacc\emca_repos_create_<date>.log for more details.
06-Dec-2008 11:35:18 oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\fieacc\e
mca_2008-12-06_11-33-38-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\fieacc\emca_2008-12-06_11-33-38-AM.log for more de
tails.
Can any one help me out to solve this issue.
Thanks,
Priya

Priya,
Are you still looking out for a fix for this issue?
Is this issue duplicate of Problem in Enterprise Manager DB Console:
If not, please provide more details from the logfile.
D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\fieacc\emca_2008-12-06_11-33-38-AM.log

How to check odi master repository exist in oracle database?

Is there way to check the ODI master repository is exist in oracle database or any api to test that?
Your help much appreciated.

Thanks for you reply,
That's fine, i think you aware of that, once open the topology manager "topology.bat", you can test the master repository, if you give any existing database user but its not master rep user, that throw exception "Master repository is not installed on this connection".
I want know what are tables and data's are getting verified during the connection test.
I think If you know regarding above my question, that will solve my problem.
Thanks

Oracle 10g to 11g Upgrade - Oracle Clusterware problem

Oracle10g RAC (2 Nodes) RHEL 4 64bit
Hi All,
I have began the procedure for upgrading Oracle Clusterware to 11g. However, during the install OUI was giving me certain error messages like it couldn't transfer the OUI installlogs to node 2. Well, I kept pushing through the install and after I ran the last rootupgrade script on node 2 it gave me the following error:
Checking the existence of nodeapps on this node
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Creating '/crs/home/install/paramfile.crs' with data used for CRS configuration
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Setting CRS configuration values in /crs/home/install/paramfile.crs
So I ignored the error for the time being and after that I checked the status of crs and it gave me the following:
[oracle@vtl-rac2 crsd]$ crsstatus
HA Resource Target State
ora.VMRACDEV.VMRACDEV1.inst ONLINE ONLINE on vtl-rac1
ora.VMRACDEV.VMRACDEV2.inst ONLINE ONLINE on vtl-rac2
ora.VMRACDEV.db ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ASM1.asm ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.LISTENER_VTL-RAC1.lsnr ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.gsd ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ons ONLINE OFFLINE
ora.vtl-rac1.vip ONLINE ONLINE on vtl-rac1
ora.vtl-rac2.ASM2.asm ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.LISTENER_VTL-RAC2.lsnr ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.gsd ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.ons ONLINE OFFLINE
ora.vtl-rac2.vip ONLINE ONLINE on vtl-rac2
So i tried to bring it back up by doing a crs_stop -all and crs_start -all and it gave me the following error:
vtl-rac1 : CRS-1019: Resource ora.vtl-rac2.ons (application) cannot run on vtl-rac1
Start of `ora.vtl-rac1.ons` on member `vtl-rac1` failed.
vtl-rac2 : CRS-1019: Resource ora.vtl-rac1.ons (application) cannot run on vtl-rac2
CRS-0223: Resource 'ora.VMRACDEV.db' has placement error.
CRS-0215: Could not start resource 'ora.vtl-rac1.ons'.
CRS-0215: Could not start resource 'ora.vtl-rac2.ons'.
I am thinking that all of this is caused by the various issues I had with the install. If I am incorrect, then please let me know. If it is true, I would like to know if there are any 11g docs on how to clean up a failed clusterware upgrade. Any advice would be greatly appreciated on any of the situations I am having.
Thank you

Hi Chandra,
Did CVU report any problems before the upgrade?No, there were no errors reported by CVU before the upgrade.
I don't there is note out there for cleaning 11g CRS
install...and I think can very use the 10g CRS note -
239998.1.Yeah I might have to go that way.
I have both the 11g CRS install and upgrade from 10g
to 11CRS at
http://chandradba.blogspot.com/2007/08/oracle-11g-rac-
install-on-red-hat-50.html
and
http://chandradba.blogspot.com/2008/02/oracle-10g-crs-
upgrade-to-11g-crs.html
see if it helps.Yup, your guide is very simple, clear and error proof :) That's how mine when pretty much except right around 75% I started getting these strange errors of files not being able to be transferred to node 2. Anyways, it shouldn't be a problem as none of those errors were configuration related...or else I would have a messed up cluster.
Well, I actually rebooted both machines and now the whole CRS stack is up!! So I guess I am ok. We'll just have to wait and see.
Thanks for your help Chandra...I always appreciate it.

Oracle Installation Problem on Windows 2000

Dears
I have the Windows 2000 Advance Server and Windows 2000 Professional. I install the Oracle8 on Windows 2000 Advance Server and Windows 2000 Professional. I have a lot of problems while i install. If i install it successfully after two or three days it gives me some errors. like it give errors the services. It could not start the Instance.
If i upgrade the NT 4.0 to Windows 2000 which is also an ORACLE server. It upgrade the OS but not upgrade the Registory. It have the same problem
Please tell me is the Oracle 8.0.4 is compatible with Windows 2000 Advance Server and Windows 2000 Professional or not.
Please Please.
Yours
Muhammad Munir
[email protected]
null

This resolved my problem as well. I am on Windows 2000 server, SP2. The problem installing Oracle 8.1.7.0.0 standard edition exhibited itself by briefly changing the cursor to an hourglass and then returning to ready. The executable JREW.EXE would briefly execute in processes and then stop.
I copied the installation media to a server drive and renamed symcjit.dll and the installer worked correctly.
Thank you to Yugandhar for this solution.
We too faced some of those problems ie setup.exe wont even run in Windows XP pro, p4 system..the culprit is symcjit.dll. Its the problem in p4 to run this dll. After lot of research, just rename it and all is set to go.
regards
Yugandhar

Oracle Listener Problem

I am having a problem starting the Oracle Listener after a system crash on Windows NT.
However, if I first connect to the internet and then try to restart, everything works ok.
Why should I have to connect to the internet with my laptop in order to start the Oracle Listener?
The message I am getting is as follows.
C:\WINNT\Profiles\timh\Desktop>net start OracleStartORCL
The OracleStartORCL service is starting..........
The OracleStartORCL service was started successfully.
C:\WINNT\Profiles\timh\Desktop>net start OracleTNSListener80
The OracleTNSListener80 service is starting.
The OracleTNSListener80 service could not be started.
A system error has occurred.
System error 1067 has occurred.
The process terminated unexpectedly.
null

some more info.
Given below is the output of status. does anything look bad or am I doing something wrong?
for the service"abcd" it says has two instances, one of the status is unknown. does that matter is it always like that or I am asking very dumb questions?
Please excuse me if that is the case.
C:\lsnrctl status
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 23-JUL-2007 14:54:28
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=servername)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Produc
tion
Start Date 23-JUL-2007 10:27:09
Uptime 0 days 4 hr. 27 min. 19 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora92\network\admin\listener.ora
Listener Log File D:\oracle\ora92\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=servername.domain)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=servername.domain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=servername.domain)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "abcd" has 2 instance(s).
Instance "abcd", status UNKNOWN, has 1 handler(s) for this service...
Instance "abcd", status READY, has 1 handler(s) for this service...
Service "abcdXDB" has 1 instance(s).
Instance "abcd", status READY, has 1 handler(s) for this service...
The command completed successfully

Oracle driver problem

Hello,
I'm currently trying to install the Jive forum application on the WAS. The installation itself went very well, but I have a problem with the initial setup.
At a certain point I have to give the DB driver class and the according connection string.
I have a oracle DB installed for this and was using the following driver class:
oracle.jdbc.driver.OracleDriver
As error jive setup gives me :
Unable to load database driver 'oracle.jdbc.driver.OracleDriver' - make sure it is in your appserver's classpath.
I have deployed the classes12.jar as described in
http://help.sap.com/saphelp_nw04/helpdata/en/80/4f34c587f05048adee640f4c346417/frameset.htm
This also did not solve my problem.
Does somebody has some experience with this?
Thanks a lot!
Regards,
Peter

Hi,
how likely is it that your DB connect code produces the problem ? Did you try this question on the database forum ?
Frank

Oracle report problem-Passing a column value from a query block to another

Hi I am facing a problem in oracle reports.
I have 3 query blocks say Q1,Q2 and Q3.
From Q1 I get a tblkey coulmn and for each value of tblkey I need to pass it on to Q2 which gives me a status and now finally Q3 will take tblkey and status to give me final output.
Can somebody please tell me how I can do it?
Thanks,
Avin

Depending on your report requirement, you may do a join of Q1, Q2, and Q3; or keep all Qs and for Q3 use subqueries ...
Select ... from ... where tblkey, status in (
select tblkey, status from ... where tblkey in (
select tblkey from .... where .... ) )
Good luck.
DC

Crystal Report Oracle Logon Problem

Hi,
We are using Webforms for launching the reports. When we tried to launch the reports system is prompting for logon information. It states "The report you requested requires further information." followed by text box having Server Name, Database Name, User Name, Password and use integrated security(checkbox).
We are using Oracle backend for connecting the database. Crystal Report RPT is designed using the OLEDB ADO (Database Type) and the provider is u201CMSDAORAu201D.
The same report is working fine when the Internet service manager identity is set as u201CLocal Systemu201D reported problem occurs when the identity is set as u201CNetwork Serviceu201D. How to over come this issue.
Crystal Version : Crystal Reports 2008 is installed
Operating System : Windows server 2003 standard edition
Oracle Version : Oracle 11g
Please Note : Report is fetching data from the crystal report designer in the preview. There is no problem in oracle connectivity.
Code is available below
rpt.Load(@"D:\report\totaldetails_sub_sp_oracle.rpt");
CrystalDecisions.CrystalReports.Engine.Database crDb;
CrystalDecisions.CrystalReports.Engine.Tables crTables;
CrystalDecisions.CrystalReports.Engine.Table crTable;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo crConnInfo;
crDb = rpt.Database;
crTables = crDb.Tables;
crConnInfo = new CrystalDecisions.Shared.ConnectionInfo();
crConnInfo.ServerName = "< Oracle Service Name>";
crConnInfo.DatabaseName = "";
crConnInfo.UserID = "<Oralce User Name>";
crConnInfo.Password = "<Oracle Password>";
for (int i = 0; i < crTables.Count; i++)
crTable = crTables<i>;
crTableLogOnInfo = crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnInfo;
crTable.ApplyLogOnInfo(crTableLogOnInfo);
CrViewer.ReportSource = rpt;

Thanks a lot for replies ...
To use oracle client 32 bit on the x64 server may be a problem for the next times. And my project leader don't want to change oracle client version (x64). So I try to change my reports connections to ODBC type.
Now, I want to ask another question:
Firstly, I will test these changes on 32 bit. Later, I test it on 64 bit.
My report are created on Crystal reports 10, 32 bit. I change the connection type by using "Set Datasource Location" menu. I test this ODBC connection with my report on 32 bit platform. I can see the records on the Crystal Reports when I refresh my report. This is OKEY. ODBC connection is success on 32 bit.
But, in my project (this is an web application, and it is working 32 bit and 64 bit successfully), I can't see the records. I debuggged my project on 32 bit with Visual Studio. For this, I put some breakpoints on to the specific places. I watch that two records are taken from database. Everything is good. But when "reports.aspx" file opens, these records don't appear. Before changing connection type , this records were listed in my project on 32 bit.
For this, have you any ideas ?
Thanks ...

Repository 6i to oracle 8i problem.

Similar Messages

Maybe you are looking for