Repository access failed Root Cause: Password could not be retrieved

We have both infrastructure and application server installed on same unix box.
When I click on "OC4J_BI_Forms" link on EM page it throws below error. The status "unknown" icon.
Error
=====
An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved
Any help on this is highly appreciated.
Regards

We have both Apps & Infrastructure installed on the same HP Box. we have all components for both are running when I check them from unix prompt. On Infrastructure page shows all processes up.
On Middle Tier OC4J_BI_Forms or HTTP_Server or any OC4J components shows status unkown and other components Forms, BC4J, Forms, SSO shows up.
When I click on OC4J_BI_Forms or HTTP_Server or any OC4J components on mid tier I get the below error
Error
An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved
Any hint/help to resolve this issue is highly appreciated.
Regards
NTRao

Similar Messages

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

Newsfeed error - The operation failed because the server could not access the distributed cache.

Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
"The operation failed because the server could not access the distributed cache."
Reading through various posts, I've checked:
- Activity feeds and mentions tabs are working as expected.
- User Profile Service is operational and syncing as expected
- Search is operational and indexing as expected
- The farm was installed based on the autospinstaller scripts.
- Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
Any suggestions are welcomed, thanks.
The full error message and trace logs is as follows.
SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
for help in resolving this problem.
From the trace logs there's several messages which are triggered around the same time:
http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
reference not set to an instance of an object..
at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
Internal error code: 55.
at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)

Thanks Thuan,
I've restarted to the Distrubiton Cache servicem and the error is still occuring.
The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
> use-cachecluster
> get-cache
CacheName            [Host]
                     Regions
default
DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityF [SERVER:22233]
eedLMTCache_1e9f4999 LMT(Primary)
-0187-40e8-aa92-f830
8d47d6e9
DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedLogonToke [SERVER:22233]
nCache_1e9f4999-0187 Default_Region_0538(Primary)
-40e8-aa92-f8308d47d Default_Region_0004(Primary)
6e9                  Default_Region_0451(Primary)
DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fine

Hi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish

While trying to re-install Mac OS X, appears the following screen: Install failed Mac OS X could not be installed on your computer The installer encountered an error that caused the installation to fail. Contact the software manufacture for assistance. C

While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.

You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility.

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Copying Music failed. The disk could not be read from or written to.

I just added a server to my home network. It's called "DELLSEVER" and is networked via TCP/IP on a Windows Network. I can copy files to and from it no problem. I created a shared folder on the server with public read/write access and no password called "Music".
I wanted to move my iTunes music folder (~110GB) to the server's Music folder.
I followed the instruction found on this forum and went into iTunes(6.0.4.2) preferences -> Advenced -> Itunes Music folder location -> clicked Change -> selected the directory from the available list -> clicked ok.
Under "iTunes Music folder location" it now says "\\DELLSERVER\Music\iTunes", and clicked ok to close the preferences.
I then clicked Advanced -> Consolidate Library -> Consolidate.
I then get the error "Copying Music failed. The disk could not be read from or written to."
I then tried to manually copy my library from dragging the folded from my PC to the server. That worked fine, but I can't get iTunes to use the server's copy of the music, it keeps going back to my PC's copy.
Please help. I've only got about 30 Meg left on my PC's drive with iTunes and need to relocate my music to the server's drives.
And if it matters, I am Administrator on both my PC and the server.
I also tried de-authorizing my PC just in case. Made no difference.

Thanks Katrina. Mapping the folder to a drive letter allowed iTunes to start copying the music across.
Unfortuntely iTunes didn't notice that I manually copied the files across earlier, so it's overwriting them. I'm about two hours into the transfer with about another hour to go, but it looks like it's going to work.
Windows XP Pro

Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS

Dear All,
Solman installation 7.1 fails with Error in the Start instance phase.
Database : Oracle
OS: AIX 6100-07-02-1150
Oracle version: 11.2.0.3
Kernel version: 720 patch number is 114
I have checked the SAP Note #1639578 - SSFS as password storage for primary database connect .
The below values has alreadt been set in default profile and in environment variables also
RSEC_SSFS_DATAPATH=/usr/sap/SMI/SYS/global/security/rsecssfs/data
RSEC_SSFS_KEYPATH=/usr/sap/SMI/SYS/global/security/rsecssfs/key
rsdb_ssfs_connect=1
2. The Permission of the Global directory
solmantrg:smiadm 13> ls -all
total 0
drwxr-xr-x    5 smiadm   sapsys          256 Apr 18 17:37 .
drwxr-xr-x    5 smiadm   sapsys          256 Apr 19 21:51 ..
drwxr-xr-x    3 smiadm   sapsys          256 Apr 18 17:37 exe
drwxr-xr-x    3 smiadm   sapsys          256 Apr 18 17:37 gen
lrwxrwxrwx    1 smiadm   sapsys           18 Apr 18 17:37 global -> /sapmnt/SMI/global
Permission Of security Folder:
solmantrg:smiadm 17> ls -all
total 8
drwx------    5 smiadm   sapsys          256 Apr 22 13:25 .
drwxr-xr-x    5 smiadm   sapsys          256 Apr 18 17:37 ..
-rw-r--r--    1 smiadm   sapsys            0 Apr 22 13:25 ABAPPROT
drwxr-xr-x    8 smiadm   sapsys          256 Apr 18 17:39 SDT
-rw-r--r--    1 smiadm   sapsys          272 Apr 18 17:37 ms_acl_info
drwxr-xr-x    2 smiadm   sapsys          256 Apr 22 13:26 sapcontrol
drwx------    5 smiadm   sapsys          256 Apr 18 17:37 security
Permission Of rsecssfs:
solmantrg:smiadm 20> ls -all
total 0
drwx------    5 smiadm   sapsys          256 Apr 18 17:37 .
drwx------    5 smiadm   sapsys          256 Apr 22 13:25 ..
drwx------    2 smiadm   sapsys          256 Apr 19 21:01 data
drwx------    3 smiadm   sapsys          256 Apr 18 17:37 lib
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 rsecssfs
permission Of data & Key
solmantrg:smiadm 22> ls -all
total 0
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 .
drwx------    5 smiadm   sapsys          256 Apr 18 17:37 ..
drwx------    2 smiadm   sapsys          256 Apr 22 12:42 data
drwx------    2 smiadm   sapsys          256 Apr 18 17:37 key
permission Of SSFS_SMI.DAT
solmantrg:smiadm 24> pwd
/sapmnt/SMI/global/security/rsecssfs/data
solmantrg:smiadm 25> ls -all
total 8
drwx------    2 smiadm   sapsys          256 Apr 22 12:42 .
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 ..
-rw-------    1 smiadm   sapsys          972 Apr 22 12:42 SSFS_SMI.DAT
No key for File ( SSFS_SMI.KEY ) IN PATH ( /sapmnt/SMI/global/security/rsecssfs/key) Exists
solmantrg:smiadm 28> cd key
solmantrg:smiadm 29> ls -altr
total 0
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 ..
drwx------    2 smiadm   sapsys          256 Apr 18 17:37 .
3. From smiadm, R3trans -x shows 0000. BUT from ora>sid>, R3trans -x shows 0012
solmantrg:orasmi 2> R3trans -x
This is R3trans version 6.22 (release 720 - 26.10.11 - 13:00:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SMI'"
R3trans finished (0012).
4. Output Of Trans.log from Ora<SID> User
solmantrg:orasmi 3> more trans.log
4 ETW000 R3trans version 6.22 (release 720 - 26.10.11 - 13:00:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.04.2014 - 14:41:32
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Tue Apr 22 14:41:32 2014                                                 145 0.000145
4 ETW000 [     dev trc,00000] db_con_init called                                                        41 0.000186
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000                                                                                                  91 0.000277
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  84 0.000361
4 ETW000 [     dev trc,00000] create_con (con_name=R/3)                                                 40 0.000401
4 ETW000 [     dev trc,00000] Loading DB library '/usr/sap/SMI/SYS/exe/run/dboraslib.o' ...             74 0.000475
4 ETW000 [     dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/SMI/SYS/exe/run/dboraslib.o"), hdl 0
4 ETW000                                                                                               31906 0.032381
4 ETW000 [     dev trc,00000] Library '/usr/sap/SMI/SYS/exe/run/dboraslib.o' loaded                     49 0.032430
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  61 0.032491
4 ETW000 [     dev trc,00000] Version of '/usr/sap/SMI/SYS/exe/run/dboraslib.o' is "720.00", patchlevel (0.114)
4 ETW000                                                                                                 493 0.032984
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  55 0.033039
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                 108 0.033147
4 ETW000 [     dev trc,00000] New connection 0 created                                                 264 0.033411
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  79 0.033490
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             79 0.033569
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  53 0.033622
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          35 0.033657
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  74 0.033731
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3             36 0.033767
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol             49 0.033816
4 ETW000                          ==> connect info for default DB will be read from ssfs
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000                                                                                                  88 0.033904
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  61 0.032491
4 ETW000 [     dev trc,00000] Version of '/usr/sap/SMI/SYS/exe/run/dboraslib.o' is "720.00", patchlevel (0.114)
4 ETW000                                                                                                 493 0.032984
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  55 0.033039
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                 108 0.033147
4 ETW000 [     dev trc,00000] New connection 0 created                                                 264 0.033411
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  79 0.033490
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             79 0.033569
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  53 0.033622
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          35 0.033657
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  74 0.033731
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3             36 0.033767
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol             49 0.033816
4 ETW000                          ==> connect info for default DB will be read from ssfs
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000                                                                                                  88 0.033904
4 ETW000 [     dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [rsecssfs.c 836]          84 0.033988
4 ETW000 [     dev trc,00000] RSecSSFs: Configuration data read from environment parameters [rsecssfs.c 3664]
4 ETW000                                                                                               11463 0.045451
4 ETW000 [     dev trc,00000] RSecSSFs: Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/data/SSFS_SMI.DAT" cannot be opened for read [rsecssfs.c 2198]
4 ETW000                                                                                                 174 0.045625
4 ETW000 [     dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 1 (message: Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/data/SS
FS_SMI.DAT" cannot be opened for read) [rsecssfs.c 897]
4 ETW000                                                                                                  91 0.045716
4 ETW000 [    dbcon.c ,00000] *** ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/
data/SSFS_SMI.DAT" cannot be opened for read
4 ETW000                                                                                                  82 0.045798
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace                  37 0.045835
4 ETW000 [    dbcon.c ,00000] *** ERROR => Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS
4 ETW000                                                                                                  68 0.045903
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SMI'"
trans.log: END
Kindly help us to fix the error ""ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/
data/SSFS_SMI.DAT" cannot be opened for read"
Thanks and Regards,
Gayathri.K

Hi Deepak,
Now my installation failed with "Start Java engine "phase as in the attached screenshot.
scs00 instance is failing and i am unable to start it.
ERROR      2014-04-22 18:28:50.499 [sixxcstepexecute.cpp:899]
FCO-00011 The step startSCS with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|startSCS was executed with status ERROR ( Last error reported by the step: Instance 'SCS00/solmantrg' of SAP system SMI is in an inconsistent state: the processes do not seem to have been started within the instance.).
when i checked in getprocess list
solmantrg:smiadm 56> sapcontrol -prot NI_HTTP -nr 00 -function GetProcessList
22.04.2014 18:29:43
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GRAY, Stopped, , , 13631618
enserver, EnqueueServer, GRAY, Stopped, , , 11468864
have attached the screenshot and sapinst.dev.log
Please assist
regards,
gayathri.K

(2008 R2) AD RMS Installation Failure: ALTER DATABASE failed because a lock could not be placed on database

First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
lock could not be placed on database ." Configuration as follows:
<Informational>: This server might need to be restarted after the installation completes.
Active Directory Rights Management Services
Cluster Type
Root cluster
Trust Hierarchy
Production
Configuration Database Server
Windows Internal Database
Service Account
<SERVER>\adrms
Cluster Key Storage
AD RMS centrally managed key storage
Cluster Web Site
Active Directory RMS
Cluster Internal Address
https://adrms.<SERVER>.local:443/
SSL Certificate
Create a self-signed certificate
Licensor Certificate Name
<SERVER>
Register SCP
Register now

Hi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
references could not be translated"
Bit of background. This server has another express instance of SQL Server 2008. I have
used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
I am installing a named instance with the same name as before but fails. I have tried
creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
Cheers

Preview failed because Adobe Muse could not make connection over HTTP.

Preview failed because Adobe Muse could not make connection over HTTP.
The most commons cause of this is fire wall software which prevents HTTP connections,
you mai need to change Fire wall settings to allow Adobe Muse to make connections??
Fire Wall is not problem!!
I asked this question a month ago, no one has answered.
does anyone know how to solve this problem?
I apologize for the bad English
thanks in advance

Mac or Windows? What software do you have installed that may be interfering with an application's ability to open an internet connection (i.e. virus checker, anti-malware utility, firewall, etc.).

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

Moving library to external hard drive and get the error "Copying files failed. The disk could not be read from or written to"

Hello,
I'm moving my library to an external hard drive.
I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
Any tips?
Thank you,
Greg H
iTunes 10.6.3

OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks.

Error: failed to prepare transaction (could not satisfy dependencies)

Hi,
I was going to install a winff package (a GUI front end to ffmpeg for converting between video formats), but when I ran yaourt -S winff and tried to install it refused because it isn't for the x86_64 architecture. So I decided to edit the PKGBUILD and perhaps try to force it anyway, but then I saw that the PKGBUILD is actually getting the precompiled RPM package and as I checked, while there was no precompiled 64bit version of the RPM there was one for a deb version that is offered on winff site.
Since deb's are just archives I ended up, after a few tries, with this PKGBUILD which uses ar and tar commands to get to the binaries inside of the amd64 deb:
# Contributor: yugrotavele <[email protected]>
# Modified by libervisco for x86_64
pkgname=winff-amd64
pkgver=0.42
pkgrel=1
pkgdesc="GUI for ffmpeg"
url="http://www.winff.org"
license=('GPL')
depends=('ffmpeg gtk gdk-pixbuf')
makedepends=('')
source=('http://winff.googlecode.com/files/winff-0.42-amd64.deb')
arch=('x86_64')
md5sums=('1febf5fd19fa76bdc1da06d3e6c4d3b8')
build() {
ar vx winff-0.42-amd64.deb
tar xvzf data.tar.gz
install -Dm755 $startdir/src/usr/bin/winff $startdir/pkg/usr/bin/winff
install -Dm755 $startdir/src/usr/share/winff/presets.xml $startdir/pkg/usr/share/winff/presets.xml
install -Dm755 $startdir/src/usr/share/winff/winff.png $startdir/pkg/usr/share/winff/winff.png
So what I basically do is run yaourt -S winff and when it asks whether I want to edit it, I edit it and replace the original PKGBUILD content with above.
It successfully runs the build() commands, finds and installs the dependencies, but when it's time to install the actual new winff package is throws up this:
loading package data...
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: winff: requires ffmpeg gtk gdk-pixbuf
I don't get it. It installed all the dependencies (and I even checked whether winff works in one of the earlier tries when I manually installed gdk-pixbuf when the binary asked for it). What does it want now?
Here is the whole process:
[daniel@memeport ~]$ yaourt -S winff
==> Downloading winff PKGBUILD from AUR...
Comment by: yugrotavele on 20080518 [04:36:56]
A nice GUI frontend for ffmpeg.
First Submitted: Sun, 18 May 2008 04:28:31 +0000
Last Updated: Mon, 30 Jun 2008 04:23:08 +0000
winff 0.42-1 (Unsupported): GUI for ffmpeg
==> winff dependencies:
- ffmpeg (already installed)
- rpmextract (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
Please add $EDITOR to your environment variables
for example:
==> Edit PKGBUILD with: (replace gvim with your favorite editor)
==> Edit ./PKGBUILD with: gedit
==> winff dependencies:
- ffmpeg (already installed)
- gtk (already installed)
- gdk-pixbuf (package found)
==> Continue the building of 'winff'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
==> Making package: winff 0.42-1 (Tue Jul 1 21:34:12 CEST 2008)
==> Checking Runtime Dependencies...
==> Installing missing dependencies...
resolving dependencies...
looking for inter-conflicts...
Targets: gdk-pixbuf-0.22.0-4
Total Download Size: 0.00 MB
Total Installed Size: 0.70 MB
Proceed with installation? [Y/n]
checking package integrity...
(1/1) checking for file conflicts [############################################################] 100%
(1/1) installing gdk-pixbuf [############################################################] 100%
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading winff-0.42-amd64.deb...
--2008-07-01 21:34:13-- http://winff.googlecode.com/files/winff-0.42-amd64.deb
Resolving winff.googlecode.com... 64.233.187.82
Connecting to winff.googlecode.com|64.233.187.82|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1383594 (1.3M) [application/x-archive application/x-debian-package]
Saving to: `winff-0.42-amd64.deb'
100%[=============================================================================>] 1,383,594 191K/s in 7.4s
2008-07-01 21:34:21 (183 KB/s) - `winff-0.42-amd64.deb' saved [1383594/1383594]
==> Validating source files with md5sums...
winff-0.42-amd64.deb ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
x - debian-binary
x - control.tar.gz
x - data.tar.gz
./usr/
./usr/bin/
./usr/bin/winff
./usr/share/
./usr/share/doc/
./usr/share/doc/winff/
./usr/share/doc/winff/copyright
./usr/share/doc/winff/winff.pdf
./usr/share/doc/winff/README.txt
./usr/share/doc/winff/README-Icons.txt
./usr/share/doc/winff/README-Presets.txt
./usr/share/doc/winff/changelog
./usr/share/applications/
./usr/share/applications/winff.desktop
./usr/share/winff/
./usr/share/winff/winff.png
./usr/share/winff/presets.xml
./usr/share/winff/languages/
./usr/share/winff/languages/winff.es.po
./usr/share/winff/languages/winff.nl.po
./usr/share/winff/languages/winff.fr.po
./usr/share/winff/languages/winff.pb.po
./usr/share/winff/languages/winff.tr.po
./usr/share/winff/languages/winff.de.po
./usr/share/winff/languages/winff.zh.po
./usr/share/winff/languages/winff.it.po
./usr/share/winff/languages/winff.pt.po
./usr/share/winff/languages/winff.pl.po
./usr/share/winff/languages/winff.bg.po
./usr/share/winff/languages/winff.po
==> Tidying install...
-> Removing info/doc files...
-> Compressing man pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: winff (Tue Jul 1 21:34:22 CEST 2008)
==> Continue installing 'winff'? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ----------------------------------------------
==>y
loading package data...
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: winff: requires ffmpeg gtk gdk-pixbuf
==> WARNING: Your package is saved in /tmp/winff-0.42-1-x86_64.pkg.tar.gz
I tried doing it without changing the package name to winff-amd64, but same thing happens. What's going on?

Ahh man, and that's it! It works.
I'm just wondering now how can I contribute this PKGBUILD to AUR, but I can read that in the wiki too.
Thanks!

Error "COPYING MUSIC FAILED. The disk could not be read from or written to"

After following the procedurest to move the iTunes music, the computer started whirring away, happily copying and consolidating all the song files to the new target folder.
After copying 68gigs of 130gigs perfectly, it stopped dead and the following iTunes error message appeared:
"COPYING MUSIC FAILED. THE DISK COULD NOT BE READ FROM OR WRITTEN TO"
I am copying to an external LaCie 500g hard disk, and the current music file is split between folders on the laptop and folders and a 2nd external LaCie Hard disk. It did not appear to have any problems copying and consolidating files from both locations, until the error message showed up.
How can I solve this?
I really need to consolidate this music file.
macbook pro Mac OS X (10.4.6)

OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks.

How can i fix this for my iPhone4? "attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to. "

i keep gettign this message when trying to drag music in itunes.
attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to.

Can apply to iPhone as well > 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
If you are using a Windows based computer > iTunes for Windows: Gathering and using iTunes Diagnostics
Ignore: To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.

Repository access failed Root Cause: Password could not be retrieved

Similar Messages

Maybe you are looking for