Repository Browser inactive Sync
Hi guys, I´m new using NWDI, specially using DTR and any info about the use of it specially from sync will be appreciated.
The issue that I have is that in NWDS in the Repository Broswser in the inactive version I had the correct src files, (Previously created by other guy), and in the active version the standard src files for e-commerce. The mistake I do is to "Sync preview" in the inactive node, then all the src files dissapear and I get a "copy" of the active node, so I need to recover the initial state of the inactive node.
I tried Sync to date, but nothing happens. Is there anyway to recover this src files ?
Hi, thank you for your reply, I have the dc´s backup, this backup is in other computer in the inactive node and in the local dc´s, I don´t know why or how the inactive and the active versions are different, I think the past administration doesn´t sync this, so, I have the backup in the inactive node, so, is the only way to upload this to the active version is by creating new activities ??? or can I make a migration of the src files folder to folder ? thanks.
Edited by: Isaac Mena on Dec 9, 2010 4:29 PM
Similar Messages
-
Error in starting OWB repository browser listener
Hi,
I got the following error when starting owb repository browser listener on Solaris with startOwbbInst.sh
Exception in thread "main" java.lang.NoClassDefFoundError: javax.servlet.Servlet
at com.evermind.server.ApplicationServer.class$(ApplicationServer.java:297)
at com.evermind.server.ApplicationServer.checkDependencies(ApplicationServer.java:297)
at com.evermind.server.ApplicationServer.launchCommandline(ApplicationServer.java:498)
at com.evermind.server.OC4JServer.launchOC4JCommandline(OC4JServer.java:171)
at com.evermind.server.OC4JServer.main(OC4JServer.java:306)
Is this caused by something with the configuration?
JeffreyHi ,
What is your OWB version ?
If it is 10.2 then read the following
With Warehouse Builder 10.2.0.X, the Repository Browser Listener is only supported on Windows x86-32bit and linux x86-32bit client machine.
So start the Warehouse Builder Repository Browser Listener on Windows/Linux x86-32bit client machine
For 11g refer MOS Note 469422.1
Thanks,
Sutirtha -
When I set up Sync using my sync key (via the "Set Up Sync..." option in the Firefox 5 menu), everything works fine and all of my data is synced. However, when I close my browser and re-open it, the "Set Up Sync..." now reappears and the browser is no-longer synced.
Any ideas?Hi wouna,
If you have configured your browser to clean up the browsing history after closing the browser, the Sync configuration is also erased. [https://bugzilla.mozilla.org/show_bug.cgi?id=553400 This is something known and will be solved in the future.]
In the meantime you can tell Firefox to remember your configuration after closing in the custom configuration of your privacy settings.
I hope it helps. -
Problem starting Repository Browser Service on Windows Server 2008
Using the default Warehouse Builder installation in the 11g (11.1.0.7.0) databaseinstallation on a clean Windows Server 2008 64-bit installation.
Warehouse Builder installed and populated ok, OWB client works fine etc.
When trying to start the Repository Browser listener by running the startOwbbInst.bat, the OC4J container crashes with the following error in the \owb\j2ee\log\oc4j\log.xml:
+<MSG_TEXT>Could not create Secure http listener due to {0}</MSG_TEXT>+
+<SUPPL_DETAIL><![CDATA[java.io.FileNotFoundException: C:\Oracle\product\11.1.0\db_1\owb\bin\admin\..\..\j2ee\config\%ORACLE_HOME%\owb\j2ee\config\keystore.jks (The system cannot find the path specified)+
+ at java.io.FileInputStream.open(Native Method)+
+ at java.io.FileInputStream.<init>(FileInputStream.java:106)+
+ at java.io.FileInputStream.<init>(FileInputStream.java:66)+
+ at oracle.oc4j.security.OC4JSSLSocketFactory.getStoreIn(OC4JSSLSocketFactory.java:253)+
(The local_service_login.bat works fine).
We're starting this as an administrator user in Win2008.
All parameteres in the setowbenv.bat seems to be correct as far as I can tell. There is a strange reference to %ORACLE_HOME% in the above log, of which I've no idea where it is coming from....
Identical installation worked fine on a 64-bit Windows Server 2003, - so can this be something related to a new security model in Windows Server 2008?
(I found a posting regarding problems with the startOwbbInst.bat on Vista [here |http://forums.oracle.com/forums/thread.jspa?messageID=2275781�] - so maybe.... however, the quickfix mentioned there did'nt help us here...)
Anyone experienced similar problems (and preferably solved them) on Windows Server 2008 and/or Vista?
Regards,
-Haakon-Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon- -
Error when starting repository browser listener on Oracle Database
I have successfully installed oracle database 11g release2 (11.2.0.2.0). The associated Oracle Warehouse Builder 11g Release 2 (11.2.0.3.0) Standalone Software works fine, everything is ok.
Now I want to start Repository Browser. So, I must run the startowbbinst.bat file from directory oracle_home/owb/bin/win32 (oracle_home for oracle database ), but I receive this:
- call setowbenv.bat
*Error initializing server: Error initializing _logger for ../log/server.log: Access is denied*
Fatal error: server exiting
Please help me !!!!!!login to below url
http:/hostname:port/webdynpro/dispatcher/sap.com/com.sap.xi.adminweb/AdminApp
clcik on Java Web Start Administration and Click on Restore Archives
and refer below thread:
http://forums.sdn.sap.com/thread.jspa?threadID=1792753 -
Hi,
I use the Repository Browser to see the execution details when a mapping is in execution.
But the repository browser does not show the number of records inserted or updated, until the mapping
finishes its execution. This is happening in 10gR2.
Is there way , by which I can get the real time information of how many records got updated till now while the mapping execution is in progres.
Thanks
MDYou have to take into fact that you have a commit frequency, and max number of errors, if an error occurs it will probably rollback, you have operating mode, row based, set based, etc. you will probably not see your result until the execution is done.
-
OWB REPOSITORY BROWSER PROBLEM
I am new with owb and have a problem with that Warehouse Builder Browser.
At the first I start the OWB Browser Listener. That's ok.
Afterwards I start the Repository Browser AND login as repository owner. That's ok.
Now the problem: after I click any link, I come back again on the login PAGE. With the others links the same happens (such as Object Summary Report)
What is the problem??
I use Oracle 10gR1 and Warehouse Builder 10gR2
Please help me.
Thank you for answersHello,
I was also hit by the same and raised a SR. Here is the follow up --
Symptoms
========
One can log in OWB browser but after any navigation move, Browser returns to login page.
Cause
=====
According to development this is OC4J security bug which is specific to the OC4J version of I.E. on Windows 2000. This should work if with Netscape or with I.E. on Windows platforms after Windows 2000.
ANSWER
=======
- close the oc4j session (ctrl/c);
- in owb_home/owb/j2ee/config/owbb-web-site.xml
replace the line
<web-site port="8999" secure="true" display-name="OWB Browser Wed Site">
with
<web-site port="8999" display-name="OWB Browser Wed Site">
(removed secure = "true")
- save it;
- run the oc4j session again, make sure in the oc4j outputs you cannot see
"....unpacking owbb.war", just "initialized"
- do not use any command from the owb installations; open Netscape or IE and put
the URL with http not https, e.g.
http://127.0.0.1:8999/owbb/RABLogin.uix?mode=design
This had actually solved my problem.
Cheers,
Swagata -
There is no object in Repository Browser
Hi expert
there are two sap systems which are trial version, one is sap 640, the other is sap 700.
when I go to SE80 with user "BCUSER", there is no "Internet Service" in Repository Browser tab.
I want to create service by " internet service ".
is it because of trial version?
tons of thanks.
msonghi all,
perhaps it's because of IE7.0
but another problem is ,when I create a service, it says :may not make changes in customer system,BCUSER and DDIC only can choose "display object", can someone tell me the required authorization? I'm a pretty new, please tell me how to setting? thanks very much.
BR.
msong -
OWB 10.2.0.1.31: Not be able to view reports on Repository Browser
Hello,
I not be able to show the list of execution mappings into owb repository browser. I get access to login page and i get access with runtime repository owner user, but repository browser don´t show the mapping execution list into execution report page.
In other installation od OWB the execution mapping's report showed correctly. I try to install into clean computer and not be able to get the result of execution mapping.
Any idea??
JaaquinI have exactly the same problem. Repository browser is working, I can see deployment reports. The execution reports are working but emtpy. Although the control center manager shows execution logs.
The problem appeared after I installed the last patch Warehouse Builder 10.2.0.4 Patch. Everything else seems to work normally.
The client version is 10.2.0.4.36
The repository version is 10.2.0.4.0
Can it be the difference between the repository and OWB browser versions?
Thanks,
Kaur -
Problem in starting repository browser on owb 11g
I have successfully installed oracle 11g release1. The associated Warehouse Builder works fine, everything is ok.
Now I want to start Repository Browser. So, I must run the startowbbinst.bat file from directory oracle_home/owb/bin/win32, but I receive this:
- call setowbenv.bat
- date and time - Error initializing server: Error initializing _logger for ../log/server.log: Access is denied
-date and time - Fatal error: server exitingSame issue for me too. Can you please tell me the solution for this issue.
-
HTTPSession lost in the Repository Browser
Hello,
we often lost the Session in the Repository Browser. If we use a link in the Browser the login screen appears often in a random manner.
The message in the oci4j window is:
07/10/02 13:26:43 data_source.getHttpSession: >>>>HttpSession lost or first time through : create new HttpSession
07/10/02 13:26:43 UserData.restoreData(...) new snapshot created - values reinitialized
07/10/02 13:26:43 data_source.restoreData(...) new snapshot created - values reinitialized
For a timeout the period is to short.
Does anybody know how we can debug the session. We don't why we lost the session.
Regards AlexanderI've experienced the exact same problem. I've was going to open a SR in metalink about it, but the last time I opened a SR, they told me I should wait until 10.2.0.3 is released since it has a lot of bug fixes in it. It's been three months and I am still waiting for the patch for Unix. So far, it is just one of many annoyances with 10.2.0.2. Wish they were faster about releasing patches.
If anyone has a workaround for this, I'd be interested in knowing.
Thanks. -
I am having "downloading safari safe browsing data" syncing problem !
I am having "downloading safari safe browsing data" syncing problem ! My videos and music erased off from my new generation Ipad with IOS7 and I can restore them back from my itunes? I am using Win7. How can I get rid of this problem ?
Hi ...
This is the Safari for OS X community.
Best to post your topic in the iTunes for Windows community > iTunes for Windows: iTunes: Apple Support Communities -
What is the source table for repository browser info?
Hi guys,
I need to create report for everyday's data refresh, mostly like what repository browser does. So what is the source table for repository browser info? I am in OWB 10gR2. Thanks a lot.I believe the runtime audit browser uses the views that start with "RAB" in the control center.
But it would probably better if you used the Audit Execution views. More information can be found in the "API and Scripting Reference" document...
http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/api_2runviews.htm
In order to get access to the Public views from SQL Plus using a schema other than the control center, I believe you need to grant the ACCESS_PUBLICVIEW_BROWSER sys privilege to each OWB user. Look at Note:434718.1 for more information. -
How to enable the repository browser
Hi everyone
Can you please guide me to enable the repository browser in owb 11g. Should we access it from the server itself or can we access it from the client if so can u please provide me with the detail steps as to enable it? and should we enable it from the client or the server itself?
regards
SubhasreeYou can access the repositry browser from your client.
Under Adminstration in OWB in Start-Program. click on Start OWB Browser Listener.
Then click on OWB/Repository Browser
Login to your repository. -
Unable to open repository browser
I am unable to open the repository browser in oWB10g r2.
I clicked on start owb listener but still facing the problemHi,
I've just tried to do something like that but with owb11g and I had no problem
try to follow the steps on
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson6/loading-warehouse.htm#t4
it worked for me...
Regards
Maybe you are looking for
-
Order Status for partial return sales order
Dear All, I am facing an issue at my client for which I am unable to find an appropriate reason. We have done a complete Sales order cycle: S.Ord - Delivery and Invoice (100qty). Now the customer returns a certain part of materials delivered (say 30q
-
Hi, I have several of my cd imports to itunes, unable to listen to for lots of background noise. Applecare told me the optical drive was at fault; a new one replaced old one (less than a year old) still same problem after re-imprting relevant cds.
-
My iPod touch 5th gen isn't letting me play most of my music
My iPod touch 5th gen isn't letting me play most of my music. If I try to play a song it will just skip it and then if I go back to try again it will be greyed out. I can play all my music on iTunes on my computer but only about 10% on my iPod, and t
-
My old PC crashed, how do I get all my bookmarks onto my new PC?
Does Firefox store all my bookmarks somewhere so that I can retrieve them onto my new PC? If not, I have a copy of most of my bookmarks in a folder in Windows Explorer, how do I import them, en mass, to my new bookmarks?
-
I have iDVD 7.1.2. I have the main (root?) screen. Say it's Billy. Under Billy, I want a button (submenu?) that says 2010 and then under that, I want to put Birthday Party, Soccer Game, Vacation. Would these be slideshows? Then, I want 2011 and