Repository Data Store not initialized. Please activate the Repository Data Store by navigating to control center page.

Currently when navigating to Applications/Script Management in UCCX 8.5 I get the following error.
Error reading Scripts
Repository Data Store not initialized. Please activate the Repository Data Store by navigating to control center page.
Under Network Services in Cisco Unified CCX Serviceability I notice the following.
Cisco Unified CCX Database - Out of Service
Cisco Unified CCX Cluster View Daemon/Manager Manager/File Manager - Partial Service
Cisco Unified CCX Engine/Manager Manager/File Manager - Partial Service
Cisco Unified CCX Engine/Subsystem Manager/Unified CM Telephony Subsystem - Partial Service
Everything was fine when I went home before the Christmas break.
I've tried restarting the CCX Database service but it does not start. I don't want to reboot now as the call center is taking calls just fine. I can reboot tonight.

Hi
I've seen this on a couple of 8.x releases, and it recurs regularly on one 8.5 customer. Definately a bug. They're HA, so the primary DB tends to die and then it limps along with primary server doing call processing, and secondary running the DB.
Reboots clear it, I've not had chance to read the 75 pages of resolved caveats for SU4 yet to see if it looks like it's fixed :-)
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Similar Messages

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

While trying to activat the purchasing data source in LBWE I'm getting erro

Hi,
.while trying to activate the purchasing data 2lis_02_scl source in LBWE Iu2019m getting following error msg.
'Client XXX has status is not modifible'
Regards,
devi,

Hi,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
Thanks,

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Data is not getting replicating to the destination db.

I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
setps for configuration _ steps followed by metalink doc.
==================
Set up ARCHIVELOG mode.
Set up the Streams administrator.
Set initialization parameters.
Create a database link.
Set up source and destination queues.
Set up supplemental logging at the source database.
Configure the capture process at the source database.
Configure the propagation process.
Create the destination table.
Grant object privileges.
Set the instantiation system change number (SCN).
Configure the apply process at the destination database.
Start the capture and apply processes.
Section 2 : Create user and grant privileges on both Source and Target
2.1 Create Streams Administrator :
connect SYS/password as SYSDBA
create user STRMADMIN identified by STRMADMIN;
2.2 Grant the necessary privileges to the Streams Administrator :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
In 10g :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
2.3 Create streams queue :
connect STRMADMIN/STRMADMIN
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'STREAMS_QUEUE_TABLE',
queue_name => 'STREAMS_QUEUE',
queue_user => 'STRMADMIN');
END;
Section 3 : Steps to be carried out at the Destination Database PLUTO
3.1 Add apply rules for the Schema at the destination database :
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'APPLY ',
streams_name => 'STRMADMIN_APPLY',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
3.2 Specify an 'APPLY USER' at the destination database:
This is the user who would apply all DML statements and DDL statements.
The user specified in the APPLY_USER parameter must have the necessary
privileges to perform DML and DDL changes on the apply objects.
BEGIN
DBMS_APPLY_ADM.ALTER_APPLY(
apply_name => 'STRMADMIN_APPLY',
apply_user => 'SCOTT');
END;
3.3 Start the Apply process :
DECLARE
v_started number;
BEGIN
SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
if (v_started = 0) then
DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
end if;
END;
Section 4 :Steps to be carried out at the Source Database REP2
4.1 Move LogMiner tables from SYSTEM tablespace:
By default, all LogMiner tables are created in the SYSTEM tablespace.
It is a good practice to create an alternate tablespace for the LogMiner
tables.
CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
MAXSIZE UNLIMITED;
BEGIN
DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
END;
4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
connect SYS/password as SYSDBA
ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
Note: If the number of tables are more the supplemental logging can be
set at database level .
4.3 Create a database link to the destination database :
connect STRMADMIN/STRMADMIN
CREATE DATABASE LINK PLUTO connect to
STRMADMIN identified by STRMADMIN using 'PLUTO';
Test the database link to be working properly by querying against the
destination database.
Eg : select * from global_name@PLUTO;
4.4 Add capture rules for the schema SCOTT at the source database:
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'CAPTURE',
streams_name => 'STREAM_CAPTURE',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
4.5 Add propagation rules for the schema SCOTT at the source database.
This step will also create a propagation job to the destination database.
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name => 'SCOTT',
streams_name => 'STREAM_PROPAGATE',
source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
Section 5 : Export, import and instantiation of tables from
Source to Destination Database
5.1 If the objects are not present in the destination database, perform
an export of the objects from the source database and import them
into the destination database
Export from the Source Database:
Specify the OBJECT_CONSISTENT=Y clause on the export command.
By doing this, an export is performed that is consistent for each
individual object at a particular system change number (SCN).
exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
Import into the Destination Database:
Specify STREAMS_INSTANTIATION=Y clause in the import command.
By doing this, the streams metadata is updated with the appropriate
information in the destination database corresponding to the SCN that
is recorded in the export file.
imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
5.2 If the objects are already present in the desination database, there
are two ways of instanitating the objects at the destination site.
1. By means of Metadata-only export/import :
Specify ROWS=N during Export
Specify IGNORE=Y during Import along with above import parameters.
2. By Manaually instantiating the objects
Get the Instantiation SCN at the source database:
connect STRMADMIN/STRMADMIN@source
set serveroutput on
DECLARE
iscn NUMBER; -- Variable to hold instantiation SCN value
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
END;
Instantiate the objects at the destination database with
this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
controls which LCRs for a table are to be applied by the
apply process. If the commit SCN of an LCR from the source
database is less than or equal to this instantiation SCN,
then the apply process discards the LCR. Else, the apply
process applies the LCR.
connect STRMADMIN/STRMADMIN@destination
BEGIN
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
SOURCE_SCHEMA_NAME => 'SCOTT',
source_database_name => 'REP2',
instantiation_scn => &iscn );
END;
Enter value for iscn:
<Provide the value of SCN that you got from the source database>
Note:In 9i, you must instantiate each table individually.
In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
is used for instantiation...
Section 6 : Start the Capture process
begin
DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
end;
/

same problem, data not replicated.
its captured,propagated from source,but not applied.
also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
queried results are as under:
1.at source(capture process)
Capture Session Total
Process Session Serial Redo Entries LCRs
Number ID Number State Scanned Enqueued
CP01 16 7 CAPTURING CHANGES 1010143 72
2. data propagated from source
Total Time Executing
in Seconds Total Events Propagated Total Bytes Propagated
7 13 6731
3. Apply at target(nothing is applied)
Coordinator Session Total Total Total
Process Session Serial Trans Trans Apply
Name ID Number State Received Applied Errors
A001 154 33 APPLYING 0 0 0
4. At target:(nothing in buffer)
Total Captured LCRs
Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
STRMADMIN STREAMS_QUEUE 0 0 0

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Please enter the expiry date in dd.mm.yyyy format

Dear All,
I have configured SAP AA in Dev. Now I want to craete asset master. But it is showing the following error, when I am going to save:
Please enter the expiry date in dd.mm.yyyy format
Can anyone tell me the solution?
Thanks
Azimul

Thanks Jigar for your reply.
My company is using SAP last 2.5 years. During SAP Implementation, Consultants configured SAP AA, but during testing it showed error in Asset Accounting. That is why, we donu2019t use SAP AA.
Now we want to use Asset Accounting in SAP. I have configured SAP AA in Development. Then I try to Create Asset Master, But it is showing Error:
Please enter the expiry date in dd.mm.yyyy format
I cannot get Error message no also. If I double click on error, it is not opening.
I donu2019t know about Validations. Can u please guide me?
Thanks,
Azimul
Edited by: Azimul on Oct 1, 2011 7:58 AM

LDAP Config File - data source not initialized

Hi,
We have altered our LDAP config xml file to deal with an LDAP with multiple branches. This was done previously and was working fine. We have just changed again as another branch was added. Now if some enters the wrong password on the login screen they get this error message
Unknown message (ID = data source CORP_LDAP_CONSULTANTS not initialized
rather then the usual try again message. Looking in the ume logs there are also lots of warnings about the new data sourse id (CORP_LDAP_CONSULTANTS)not being initialized. And we also can no longer add new groups or users.
Any thoughts?
<b>Think we may have fixed that problem. Wrong authorizations? But now we get a whole new problem. During startup of portal our error_logs get a whole series of messages about NameNotFoundException around groups and users. Looking closely some of the user domains don't even exist in the LDAP any more.
Also when we try and add a user we get an error saying "PersistanceException: No Data Source feels Repsonsible for principal!"</b>
ANY PEARLS OF WISDOM
We are on EP6 SP2
Message was edited by: Luke Collier
Message was edited by: Luke Collier

Hi guys,
I'm running into exactly the same issue. The problem seems to occur only when the report being accessed by guest is a file data source. The only other option I could think of is setting up SSO for BIP and the application issuing the URL to the report.
Could'nt find anything else in the documentation or known issues list that might fix this without having to setup Single Sign On. Any further luck with your investigation? I'd appreciate any feedback.
Thanks
Jonathan Cruz

The data could not be saved because the server could not be contacted - Error

Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
The operation has timed out.
I verify the database, the record is saved but the application show me the error.
Please help me I have to deliver this screens today.
Thanks!
Boanerges. Mr 3: 17

Hi Elmer,
I researched this error message, I think you can try the methods below:
Increase the timeout of the connection between the client and the server
Increase Client timeout, and it is set in the Application class in the Client Project
For further information: Error message: Unable to save data

Command Line argument is not valid please verify the switch.......???

hello frends
We are currently getting this error.
Command Line argument is not valid please verify the switch.
The code used to send the mail is
mail ="mailto:?subject="+escape(subject)+"&body="+escape(email);
document.location = mail;
return ;
this is a javascript code to open outlook mail to send emails.
the main problem is,when we write
mailto:?subject=abc&body=uvwxyz......
then we should be getting abc as subj and uvwxyz as the body..,and we r getting it....
but when we include ""(double quotes ) in either the subject or the body..,it is showing the error line mentioned above.
and if em using the html tags in the body part..,it's giving everything including the tags,which z not desired.
kindly help me .....

shikha6g wrote:
i've thought..,you people are brainy enough to help me out in the javascript too...!!so..,i relied on this forum and have posted my problem,coz solving this thing was really imp for me.
i din't knew,dat i'll get such circastic replys here.sorryTo me, being brainy implies that you are a smart thinker and good at problem solving. It doesn't mean that you know a language that you never learned.

My data are not gettitng enterted in the data base

import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class Main implements ActionListener
Frame mainf;
MenuBar mb;
MenuItem List,admitform,inquiry,exit;
Menu newm,update;
Inquiry iq;
Admit ad;
Register reg;
Main()
mainf=new Frame(" Engg College V/S Mumbai University ");
     mb=new MenuBar();
     newm=new Menu(" New ");
     update=new Menu(" Update ");
     List=new MenuItem("List");
     admitform=new MenuItem("Admit");
     inquiry=new MenuItem("Inquiry");
     exit=new MenuItem("Exit");
newm.add(List);
               newm.add(admitform);
newm.add(inquiry);
               newm.add(exit);
          mb.add(newm);
          mb.add(update);
mainf.setMenuBar(mb);
               exit.addActionListener(this);
               List.addActionListener(this);
     inquiry.addActionListener(this);
     admitform.addActionListener(this);
mainf.setSize(400,300);
     mainf.setVisible(true);
public void actionPerformed(ActionEvent ae)
if (ae.getSource() == List)
          reg=new Register();
     if(ae.getSource()==inquiry)
     iq=new Inquiry();
if(ae.getSource()==admitform)
     ad=new Admit();
          if(ae.getSource()==exit)
     mainf.setVisible(false);
public static void main(String args[])
          new Main();
}

>My data are not gettitng enterted in the data
base
no real surprise to me.Can u please help me ??How? There's no connection and prepared staments anywhere in your code. Do you think the database will update itself automagically?

LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

Hi:
I have a very simple test LS App:
1 Table "Person" with 1 property "Name"
One totally standard Editable Grid
So no complicated calculations that could timed out...
When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
Despite the error the data gets persisted on the database.
I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

If you decide to try again I would:
1) Uninstall Visual Studio
2) Uninstall SQL Server (all versions)
3) Re-install SQL Server
4) Re-Install Visual Studio
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

EUL5_BATCH_REPOSITORY could not be found in the repository schema

Hi Gurus
I had created a new schema XXDISC to store the scheduled workbook results and executed the batchusr_app.sql to complete the necessary setups.
I was able to schedule the workbooks as well.
I have since dropped the XXDISC schema and now when i access the scheduling in disco plus i get the error message
"Insufficient database privileges for scheduling: A workbook cannot be scheduled for the following reason(s) - The package
EUL_BATCH_REPOSITORY could not be found in the Repository Schema XXDISC. Batchusr.sql should be run against the current EUL"
Info:
Discoverer 11.1.1.3
Apps Mode EUL
Regards
Ariv

Hi,
Do you have a question here?
did you try "Batchusr.sql should be run against the current EUL" ?
the error is probably since your current EUL (DB USER) is missing the privilege to schedule, try to run the script and see if it helps
I suggest you do that in a testing environment...
Tamir

Please maintain the master data for material during product cost collector

hi
i get a error
please maintain the master data for material during product cost collector
please guide me
regards
leo

Hi Leo,
Can you elaborate your issue, like when did you get the error exactly?
If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
Please post your question in the 'ERP Manufacturing (PP)' forum
Regards,
Manimaran M

Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
I would appreciate any help...
Thank you

This worked for me. GP
Problem : error 1075 and Local print spooler service is not running.
problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista. HP came up with simple solution below. The regedit part is what fixed mine. I did not need the safe mode part. I think Lexmark should add the solution to your knowledge base.
==============================
From HP: Please perform the below given steps in safe mode to resolve the issue.
Reboot your notebook and press F8. The system will show some booting options select safe mode.
Note: Starting computer in safe mode may take some time.
Uninstall the printer using Programs and Features from the control panel of your notebook.
Uninstalling any software from Control Panel :
1. Click on Vista (start) button
2. Click on control panel
3. Double click on Programs and Features
4. Click on YOUR Lexmark Printer and click on remove.
Download and reinstall the printer software using the below given link :
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
NOTE: Clicking the link may give an error indicating it is invalid.
Copy and paste the entire link in a new browser window.
After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
Click on Vista (Start) button, and type Regedit.exe in search bar
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe
Restart the computer.
This should resolve the issue.
For information on keeping your HP and Compaq products up and running, please visit our Web site at:
http://www.hp.com/go/totalcare

Repository Data Store not initialized. Please activate the Repository Data Store by navigating to control center page.

Similar Messages

Maybe you are looking for